Experiment Readiness Checklist

A Checklist on safety and operational items shall be completed before an experiment can start data taking. The following items must be included in the pre experiment checklist. The Hall C Physics Liaison is responsible for ensuring that the checklist has been completed.

[    ]

VESDA system activated?

[    ]

Hydrogen sniffers not past calibration date?

[    ]

Manual valves between cryogenic targets and recovery tanks locked in the open position before the targets are filled?

[    ]

All magnets equipped with functioning warning beacon?

[    ]

All magnet current leads covered by non-conductive or grounded shields?

[    ]

All of above shields equipped with properwarning signs?

[    ]

All magnet power supply doors are closed and properly interlocked?

[    ]

All power leads of fastbus power supplies covered by shields?

[    ]

Visual inspection of all vacuum windows performed?

[    ]

Dates of removal on tags of vacuum windows not expired or close to expiring?

[    ]

Proper warning signs installed close to all thin vacuum windows?

[    ]

Ear plugs available close to all thin vacuum windows?

[    ]

HMS shutter in HMS detector hut operational?

[    ]

Air-conditioning on in both HMS and SOS detector hut?

[    ]

Hardware switches installed to limit spectrometer rotation?

[    ]

HMS and SOS hardware angle limitations verified?

[    ]

HMS and SOS angle ranges loaded in rotation PLC?

[    ]

No oil leaks in SOS door hydraulics?

[    ]

Safety rails removed where they conflict with required angle ranges by experiment?