version 1.1, 2003/04/04 15:59:47
|
version 1.2, 2003/04/16 13:40:13
|
|
|
\category{hms} % Subject area of this document | \category{hms} % Subject area of this document |
| |
%\maintainer{Name of person maintaining document} % Optional | %\maintainer{Name of person maintaining document} % Optional |
\date{April 3, 2003} % Can use \today as the argument |
\date{April 16, 2003} % Can use \today as the argument |
| |
\begin{document} | \begin{document} |
| |
|
|
15 ton concrete-and-steel door. | 15 ton concrete-and-steel door. |
| |
\section{Door Operation} | \section{Door Operation} |
The door may be moved either by pulling/pushing on it, or |
The door is moved |
by energizing the drive motor attached to it. However you |
by energizing the drive motor attached to it. Once you have it open as wide as you |
move the door, it is suggested that you use the rubber block provided to |
need, it is suggested that you use the rubber block provided to |
chock the door in the open position once you have opened it. |
chock the door in the open position. |
It does tend to drift closed if not restrained. |
It does tend to drift closed if not restrained. If you find yourself |
|
inside the shield house with the door closed, there are pushbutton |
|
controls inside which you can use to open it (see below). |
| |
\subsection{Interlocks} | \subsection{Interlocks} |
An interlock prevents access to the HMS detector hut unless the | An interlock prevents access to the HMS detector hut unless the |
safety shutter inside the hut has been moved to its `down' position, | safety shutter inside the hut has been moved to its `down' position, |
such that it covers the vacuum window. This is to prevent people from | such that it covers the vacuum window. This is to prevent people from |
accidentally touching the large vacuum window. The door cannot be opened | accidentally touching the large vacuum window. The door cannot be opened |
unless the shutter is already inserted. |
unless the shutter is already inserted. To prevent the door from |
|
drifting open on its own, a magnetic lock holds it in the closed |
\subsection{Manual Operation} |
position. This lock is de-energized when the {\tt OPEN} control |
Once the vacuum shutter is fully inserted, you may open (close) the door |
button is pressed. |
by pulling (pushing) on the handle. Keep |
|
in mind that it has considerable inertia. This |
|
means that you must pull backwards on the door in order to slow it |
|
down near the end of its desired motion. It also means that you |
|
must pull steadily on the door to make it begin to |
|
move at all. It {\it will} respond, albeit slowly. {\bf Do not |
|
accelerate the door to a high speed!} |
|
| |
\subsection{Motorized Operation} | \subsection{Motorized Operation} |
The door may also be opened by activating the motor attached to |
The door is opened or closed by activating the motor attached to |
its hinges. The control panel for the door is mounted on the | its hinges. The control panel for the door is mounted on the |
post behind and to your right as you stand in front of the door. Press and |
post behind and to your right as you stand in front of the door. A |
|
duplicate set of controls is inside the shield house, to the |
|
right of the door. Press and |
hold the button marked {\tt OPEN} and the door will be slowly | hold the button marked {\tt OPEN} and the door will be slowly |
opened. Press {\tt CLOSE} to move the door towards the closed | opened. Press {\tt CLOSE} to move the door towards the closed |
position. Remember that the door will continue to move after | position. Remember that the door will continue to move after |
you release the button because of its inertia. |
you release the button because of its inertia. It takes about |
|
two minutes to fully open the door or to close it from the |
|
fully opened position. When closing the door, make certain |
|
to keep {\tt CLOSE} pressed until the magnetic lock near |
|
the top of the door engages. |
| |
| |
\end{document} | \end{document} |
| |
% Revision history: | % Revision history: |
% $Log$ | % $Log$ |
|
% Revision 1.2 2003/04/16 13:40:13 saw |
|
% (hcf) Add some detail, remove manual operation section |
|
% |
% Revision 1.1 2003/04/04 15:59:47 saw | % Revision 1.1 2003/04/04 15:59:47 saw |
% Initial Checkin | % Initial Checkin |
% |
|