|
version 1.2, 2005/09/22 02:13:57
|
version 1.10, 2006/01/18 15:50:44
|
|
|
|
| real*8 xfp,yfp,tthfp,tphfp,pfp,junk2,junk3,thfp,phfp | real*8 xfp,yfp,tthfp,tphfp,pfp,junk2,junk3,thfp,phfp |
| real*8 e0(10),eang(10),hang(10),targ_thick(10) | real*8 e0(10),eang(10),hang(10),targ_thick(10) |
| real*8 xtgt,ytgt,thtgt,phtgt,ptgt,dptgt | real*8 xtgt,ytgt,thtgt,phtgt,ptgt,dptgt |
| real yf,ff,thetaf |
real yf,ff,thetaf,dptgt2 |
| character*80 junkline | character*80 junkline |
| c | c |
| c The following variables are the SIMC variables | c The following variables are the SIMC variables |
|
|
|
| $ thtgt,phtgt,ptgt,dptgt) | $ thtgt,phtgt,ptgt,dptgt) |
| | |
| c | c |
| c At this point, after using polynomials from Lerose, we should |
|
| c have x,y,theta,phi, and dpmom at the focal plane. |
|
| c |
|
| c write(*,*)'Back from kincalc ...' |
|
| c write(*,*)xtgt,ytgt,thtgt,phtgt,dptgt |
|
| c x(1)=tan(phtgt) |
|
| c x(2)=ytgt |
|
| c x(3)=tan(thtgt) |
|
| c x(4)=dptgt |
|
| y_target=ytgt*100.0 |
|
| c |
|
| c Here is where we call the SIMC routines to calculate the focal plane |
|
| c quantities from the target quantities. |
|
| c |
|
| c xfp=xfinal(x,4)*100.0 |
|
| c phfp=atan(thetaf(x,4))/3.14159265*180.0 |
|
| c yfp=yf(x,4)*100.0 |
|
| c thfp=atan(ff(x,4))/3.14159265*180.0 |
|
| p_spec=ptgt | p_spec=ptgt |
| th_spec=hrsh_ang |
|
| dpp=dptgt*100.00 |
|
| x=xtgt |
|
| y=ytgt |
|
| z=0.0 |
|
| dxdz=tan(phtgt*3.14159265/180.0) |
|
| dydz=tan(thtgt*3.14159265/180.0) |
|
| write(*,*)p_spec,th_spec,dpp |
|
| write(*,*)x,y,z |
|
| write(*,*)dxdz,dydz |
|
| c |
|
| c Call to SIMC routine |
|
| c |
|
| call mc_hms (p_spec, th_spec, dpp, x, y, z, dxdz, dydz, |
|
| > x_fp, dx_fp, y_fp, dy_fp, m2, |
|
| > ms_flag, wcs_flag, decay_flag, resmult, fry, |
|
| > ok_spec, pathlen) |
|
| write(*,*)p_spec,th_spec,dpp |
|
| write(*,*)x,y,z |
|
| write(*,*)dxdz,dydz |
|
| write(6,*)x_fp,dx_fp,y_fp,dy_fp |
|
| write(*,*)m2,ms_flag,wcs_flag,decay_flag |
|
| write(*,*)resmult,fry,ok_spec,pathlen |
|
| |
|
| xfp=x_fp |
|
| phfp=atan(dx_fp)/3.14159265*180.0 |
|
| yfp=y_fp |
|
| thfp=atan(dy_fp)/3.14159265*180.0 |
|
| |
|
| c | c |
| pcentral=ptgt |
if(nevent.le.2)write(*,*)'******** mom = ',p_spec,' ******' |
| pfp=dptgt |
|
| c | c |
| |
call grndm(rndm,3) |
| |
dptgt2=rndm(1)*0.200-0.100 |
| |
xfp=rndm(2)*80.00-40.00 |
| |
phfp=rndm(3)*5.0-2.5 |
| c | c |
| c write(*,*)'Focal plane quantities ...' |
call grndm(rndm,3) |
| c write(*,*)xfp,yfp,thfp,phfp,pcentral,pfp |
yfp=rndm(1)*60.00-30.00 |
| |
thfp=rndm(2)*5.0-2.5 |
| c xfp=xtgt ! in cm |
c |
| c yfp=ytgt ! in cm |
c write(6,*)'x,phi,y,theta,ok_spec =' |
| c thfp=thtgt/3.14159265*180.0 ! in degrees |
c write(6,*)xfp,phfp,yfp,thfp,ok_spec |
| c phfp=phtgt/3.14159265*180.0 ! in degrees |
c |
| c pcentral=ptgt ! in MeV/c |
do ii=1,20 |
| c pfp=dptgt ! fraction of central momentum |
ntuple_array(ii)=0.0 |
| |
enddo |
| |
ntuple_array(11)=real(xfp) |
| |
ntuple_array(12)=real(yfp) |
| |
ntuple_array(13)=real(thfp) |
| |
ntuple_array(14)=real(phfp) |
| |
c |
| |
pcentral=ptgt |
| |
pfp=dptgt2 |
| c | c |
| c Finally, we convert this information over to a format that GEANT likes. | c Finally, we convert this information over to a format that GEANT likes. |
| c | c |
|
|
|
| c what the corresponding theta and phi are for the other arm. | c what the corresponding theta and phi are for the other arm. |
| | |
| if (abs(eang).gt.abs(hang)) then | if (abs(eang).gt.abs(hang)) then |
| phie=-.065+rndm(1)*.130 |
c phie=-.025+rndm(1)*.050 |
| thetae=-.030+rndm(2)*.060 |
c thetae=-.009+rndm(2)*.018 |
| |
if(pcentral.ge.5000) then |
| |
c phie=-.00+rndm(1)*.00 |
| |
c thetae=-.00+rndm(2)*.00 |
| |
phie=-.130+rndm(1)*.260 |
| |
thetae=-.065+rndm(2)*.130 |
| |
else if(pcentral.ge.3000.and.pcentral.lt.5000) then |
| |
phie=-.067+rndm(1)*.135 |
| |
thetae=-.034+rndm(2)*.067 |
| |
else |
| |
phie=-.087+rndm(1)*.174 |
| |
thetae=-.044+rndm(2)*.087 |
| |
endif |
| |
c phie=-.00+rndm(1)*.00 |
| |
c thetae=-.00+rndm(2)*.00 |
| escat=mp/(1.0+mp/e0-cos(fg*eang+thetae)*cos(phie)) | escat=mp/(1.0+mp/e0-cos(fg*eang+thetae)*cos(phie)) |
| pscat=sqrt(e0**2+escat**2- | pscat=sqrt(e0**2+escat**2- |
| $ 2.0*e0*escat*cos(fg*eang+thetae)*cos(phie)) | $ 2.0*e0*escat*cos(fg*eang+thetae)*cos(phie)) |
|
|
|
| else | else |
| c Hadron arm defining acceptance | c Hadron arm defining acceptance |
| 1221 call grndm ( rndm, 3) | 1221 call grndm ( rndm, 3) |
| phie=-.065+rndm(1)*.130 |
phie=-.080+rndm(1)*.160 |
| thetae=-.030+rndm(2)*.060 | thetae=-.030+rndm(2)*.060 |
| |
c phie=-.00+rndm(1)*.00 |
| |
c thetae=-.00+rndm(2)*.00 |
| escat=mp/(1.0+mp/e0-cos(fg*eang+thetae)*cos(phie)) | escat=mp/(1.0+mp/e0-cos(fg*eang+thetae)*cos(phie)) |
| pscat=sqrt(e0**2+escat**2- | pscat=sqrt(e0**2+escat**2- |
| $ 2.0*e0*escat*cos(fg*eang+thetae)*cos(phie)) | $ 2.0*e0*escat*cos(fg*eang+thetae)*cos(phie)) |
|
|
|
| endif | endif |
| | |
| ptgt=pscat | ptgt=pscat |
| |
c write(*,*)escat,eang,pscat,hang |
| dptgt=(pcentral-pscat)/pcentral | dptgt=(pcentral-pscat)/pcentral |
| c | c |
| c Following statement to fill just the high and low dp bins | c Following statement to fill just the high and low dp bins |
Return to
gukine.f
CVS log
Up to [HallC] / geant_gep / src