|
version 1.8, 2005/10/11 22:54:47
|
version 1.11, 2006/01/19 01:41:14
|
|
|
|
| real*8 xfp,yfp,tthfp,tphfp,pfp,junk2,junk3,thfp,phfp | real*8 xfp,yfp,tthfp,tphfp,pfp,junk2,junk3,thfp,phfp |
| real*8 e0(10),eang(10),hang(10),targ_thick(10) | real*8 e0(10),eang(10),hang(10),targ_thick(10) |
| real*8 xtgt,ytgt,thtgt,phtgt,ptgt,dptgt | real*8 xtgt,ytgt,thtgt,phtgt,ptgt,dptgt |
| real yf,ff,thetaf |
real yf,ff,thetaf,dptgt2 |
| character*80 junkline | character*80 junkline |
| c | c |
| c The following variables are the SIMC variables | c The following variables are the SIMC variables |
|
|
|
| $ thtgt,phtgt,ptgt,dptgt) | $ thtgt,phtgt,ptgt,dptgt) |
| | |
| c | c |
| c At this point, after using polynomials from Lerose, we should |
|
| c have x,y,theta,phi, and dpmom at the focal plane. |
|
| c |
|
| c write(*,*)'Back from kincalc ...' |
|
| c write(*,*)xtgt,ytgt,thtgt,phtgt,dptgt |
|
| c x(1)=tan(phtgt) |
|
| c x(2)=ytgt |
|
| c x(3)=tan(thtgt) |
|
| c x(4)=dptgt |
|
| y_target=ytgt*100.0 |
|
| c |
|
| c Here is where we call the SIMC routines to calculate the focal plane |
|
| c quantities from the target quantities. |
|
| c |
|
| c xfp=xfinal(x,4)*100.0 |
|
| c phfp=atan(thetaf(x,4))/3.14159265*180.0 |
|
| c yfp=yf(x,4)*100.0 |
|
| c thfp=atan(ff(x,4))/3.14159265*180.0 |
|
| p_spec=ptgt | p_spec=ptgt |
| th_spec=hrsh_ang |
c |
| dpp=dptgt*100.00 |
if(nevent.le.2)write(*,*)'******** mom = ',p_spec,' ******' |
| x=xtgt |
c |
| y=ytgt |
call grndm(rndm,3) |
| z=0.0 |
dptgt2=rndm(1)*0.200-0.100 |
| dxdz=tan(phtgt*3.14159265/180.0) |
xfp=rndm(2)*80.00-40.00 |
| dydz=tan(thtgt*3.14159265/180.0) |
phfp=rndm(3)*30.0-15.0 |
| c write(*,*)p_spec,th_spec,dpp |
c phfp=rndm(3)*0.00001-0.000005 |
| c write(*,*)x,y,z |
c |
| c write(*,*)dxdz,dydz |
call grndm(rndm,3) |
| c |
yfp=rndm(1)*60.00-30.00 |
| c Call to SIMC routine |
thfp=rndm(2)*30.0-15.0 |
| c |
c thfp=rndm(3)*0.00001-0.000005 |
| decay_flag=.false. |
c |
| wcs_flag=.false. |
|
| ms_flag=.false. |
|
| m2=(938.2796**2) |
|
| call mc_hms (p_spec, th_spec, dpp, x, y, z, dxdz, dydz, |
|
| > x_fp, dx_fp, y_fp, dy_fp, m2, |
|
| > ms_flag, wcs_flag, decay_flag, resmult, fry, |
|
| > ok_spec, pathlen) |
|
| c write(*,*)'Momentum = ',p_spec,' Angle = ',th_spec |
|
| c write(*,*)x,y,z |
|
| c write(*,*)dxdz,dydz |
|
| c write(6,*)x_fp,dx_fp,y_fp,dy_fp,ok_spec |
|
| c write(*,*)m2,ms_flag,wcs_flag,decay_flag |
|
| c write(*,*)resmult,fry,ok_spec,pathlen |
|
| |
|
| xfp=x_fp |
|
| phfp=atan(dx_fp)/3.14159265*180.0 |
|
| yfp=y_fp*100.0 |
|
| thfp=atan(dy_fp)/3.14159265*180.0*100.0 |
|
| c write(6,*)'x,phi,y,theta,ok_spec =' | c write(6,*)'x,phi,y,theta,ok_spec =' |
| c write(6,*)xfp,phfp,yfp,thfp,ok_spec | c write(6,*)xfp,phfp,yfp,thfp,ok_spec |
| c | c |
|
|
|
| ntuple_array(14)=real(phfp) | ntuple_array(14)=real(phfp) |
| c | c |
| pcentral=ptgt | pcentral=ptgt |
| pfp=dptgt |
pfp=dptgt2 |
| c |
|
| c |
|
| c write(*,*)'Focal plane quantities ...' |
|
| c write(*,*)xfp,yfp,thfp,phfp,pcentral,pfp |
|
| |
|
| c xfp=xtgt ! in cm |
|
| c yfp=ytgt ! in cm |
|
| c thfp=thtgt/3.14159265*180.0 ! in degrees |
|
| c phfp=phtgt/3.14159265*180.0 ! in degrees |
|
| c pcentral=ptgt ! in MeV/c |
|
| c pfp=dptgt ! fraction of central momentum |
|
| c | c |
| c Finally, we convert this information over to a format that GEANT likes. | c Finally, we convert this information over to a format that GEANT likes. |
| c | c |
|
|
|
| c phie=-.025+rndm(1)*.050 | c phie=-.025+rndm(1)*.050 |
| c thetae=-.009+rndm(2)*.018 | c thetae=-.009+rndm(2)*.018 |
| if(pcentral.ge.5000) then | if(pcentral.ge.5000) then |
| |
c phie=-.00+rndm(1)*.00 |
| |
c thetae=-.00+rndm(2)*.00 |
| phie=-.130+rndm(1)*.260 | phie=-.130+rndm(1)*.260 |
| thetae=-.065+rndm(2)*.130 | thetae=-.065+rndm(2)*.130 |
| else if(pcentral.ge.3000.and.pcentral.lt.5000) then | else if(pcentral.ge.3000.and.pcentral.lt.5000) then |
Return to
gukine.f
CVS log
Up to [HallC] / geant_gep / src