Jefferson Lab Hall C Logbook for February 04 - runstarts omitted
Main INDEX
Sunday
78246 02/29/04 21:21 Armstrong BANU note
78243 02/29/04 20:30 Williamson RC Summary Friday 02-27-2004 Swing through Saturday 02-28-2004
78242 02/29/04 20:28 Armstrong halo during coil mod with 6 mm tgt in
78241 02/29/04 20:26 Williamson RC Summary Friday 02-27-2004 Swing through Saturday 02-28-2004
78236 02/29/04 20:01 Louis Small DNL change
78234 02/29/04 19:40 Louis Spikes and/or DNL
78232 02/29/04 19:08 Armstrong Halo target OUT for this run
78229 02/29/04 19:02 Armstrong Halo target was out!
78228 02/29/04 18:55 Armstrong Halo monitor rates - reduced!
78226 02/29/04 18:32 Armstrong IOC SE20 reboot
78216 02/29/04 16:22 Armstrong Halo rates snapshot
78215 02/29/04 16:16 Armstrong Beam position snapshot
78214 02/29/04 16:09 Williamson Beam: BPM Current Dependence
78211 02/29/04 16:05 tforest Day Shift Summary
78207 02/29/04 14:11 nakahara Beam: HallC harpscan results
78202 02/29/04 12:43 nakahara Beam: IA/PZT
78199 02/29/04 12:02 saw Integrated asymmetry
78195 02/29/04 11:46 gaskell Moller summary for February
78193 02/29/04 10:56 gaskell moller backout
78192 02/29/04 10:52 gaskell moller results
78186 02/29/04 09:55 gaskell moller setup
78185 02/29/04 09:40 gaskell pre-moller injector parameters
78183 02/29/04 09:15 nakahara Beam: HallB leakage current
78178 02/29/04 08:06 Quém& Hight Shift Summary
78176 02/29/04 07:19 saw Rebooted g0iocsms
78168 02/29/04 04:53 saw Musson variables added to jeffylab archiver
78160 02/29/04 03:56 Falk G0 Integrity Pass1 files
78159 02/29/04 03:38 Falk Integrated charge asymmetry ....
78152 02/29/04 01:39 Quém& Hall B leaking current (~0.03%)
78151 02/29/04 01:35 dmckee Beam: Hall B leakage current
78150 02/29/04 01:34 vardan differences in beam positions
78145 02/29/04 00:46 Falk Halo Monitors
78144 02/29/04 00:45 Falk BPM/BCM Screens
78141 02/29/04 00:26 McKee Run Plan for Sunday 02-29-2004
78137 02/29/04 00:01 finn Swing shift summary
Saturday
78130 02/28/04 22:00 nakahara Moller quad ramping.
78129 02/28/04 21:34 nakahara/sew Beam: Quad change in HallC. IA/PZT/Halo_rates/RMS noise
78125 02/28/04 19:54 Slaughter run 20321 integrity file
78123 02/28/04 19:27 Slaughter integrity files runs 20309 - 20319
78122 02/28/04 19:18 finn quad scan to improve y position noise
78121 02/28/04 18:58 nakahara Beam: Countdown after beam trip
78117 02/28/04 18:42 nakahara Beam: Wild oscillations in PZTY
78116 02/28/04 18:29 Slaughter integrated charge asymmetry
78115 02/28/04 17:54 Slaughter 120 Hz analysis Run 20317
78114 02/28/04 17:52 Slaughter bcm screencap
78112 02/28/04 17:50 Slaughter shift checklist
78101 02/28/04 16:00 Neven Day Shift Summary
78098 02/28/04 14:47 pking Cleaning up data copying system.
78094 02/28/04 12:57 nakahara/sew Alarms on Jeffylab
78091 02/28/04 12:51 nakahara/saw Beam: feedback code change
78090 02/28/04 12:24 pking Correction: LTD #6 (oct1/5 det 5) was replaced by LTD #38.
78089 02/28/04 12:17 biselli/pkin swapped LTDs
78084 02/28/04 11:21
78070 02/28/04 07:25 Gzero Charge asymmetry increasing
78056 02/28/04 02:40 Falk Integrated charge asymmetry .....
78054 02/28/04 02:33 Falk G0 Integrity Pass1 files
78053 02/28/04 02:05 Williamson Run Plan for Saturday 02-28-2004
78052 02/28/04 01:25 Williamson RC Summary Thursday 02-26-2004 Swing through Friday 02-27-2004 Day
78050 02/28/04 00:32 Falk Halo Monitors
78048 02/28/04 00:30 Falk BPM/BCM Screens
78047 02/28/04 00:08 Falk 120 Hz analysis, Run 20295
78046 02/28/04 00:04 Sarah Swing Shift Summary
Friday
78043 02/27/04 23:53 Sarah Octant 5, detector 16 BL tripped off
78038 02/27/04 22:35 Sarah All ROCs rebooted (Sort of Late Entry)
78036 02/27/04 22:28 Sarah Halo Target has been out since IOC reboot
78034 02/27/04 21:23 Falk G0 DAQ ROC4 : +5V error
78030 02/27/04 19:45 S. Bailey G0 Integrity Pass1 files 12:00-20:00
78029 02/27/04 19:40 S. Bailey G0Integrity files 12:00-20:00
78028 02/27/04 19:35 biselli LTD errors light
78025 02/27/04 19:22 S. Bailey Integrated Charge Assymetry
78022 02/27/04 17:56 S. Bailey BPM screen
78019 02/27/04 17:36 Sarah Magnet IOC rebooted.
78017 02/27/04 17:20 nakahara/Pit Beam: BPM gain settings
78015 02/27/04 15:55 Neven Day Shift Summary
78013 02/27/04 15:19 Louis DNL correction: 24 hours stability
78012 02/27/04 14:41 Louis Spikes
78010 02/27/04 13:05 Rutledge Manual Coil Modulation
78008 02/27/04 12:46 Rutledge/Pki Automated Coil Modulation
78006 02/27/04 12:26 Louis Verification LINDIF parameters
77995 02/27/04 11:37 nakahara Beam: Dummy Pockels' cell is ON
77992 02/27/04 09:59 Spayde SMS: Magnet at Full Current
77990 02/27/04 08:56 Spayde SMS: Fast Dump Post-Mortem
77989 02/27/04 08:45 smithg Target: Diddled JT- esr changing
77986 02/27/04 08:05 Quém& Night(mare) shift summary
77984 02/27/04 07:34 saw Target: Archiver restarted on new disk
77983 02/27/04 07:06 Quém& Forced gain -> BPM/BCM calibration
77981 02/27/04 05:58 saw Target: Target computer reboot
77980 02/27/04 05:37 saw SMS: SMS Fast Dump
77969 02/27/04 04:02 vardan SMS IOC rebooted
77968 02/27/04 03:43 Falk na_errors (in MISC plot)
77965 02/27/04 02:28 Falk Integrated charge asymmetry .....
77962 02/27/04 02:19 Falk G0 Integrity Pass1 files
77961 02/27/04 01:50 Quém& Halo monitor strip chart after cavity recovery
77960 02/27/04 01:42 Falk Shift check list pages
77956 02/27/04 00:00 finn swing shift summary
Thursday
77953 02/26/04 23:39 Williamson RC Summary Tuesday 02-24-2004 Swing through Thursday 02-26-2004 Day
77952 02/26/04 23:33 Falk BPM/BCM Screens
77951 02/26/04 23:30 Falk Halo Monitors
77948 02/26/04 22:23 Falk 120 Hz analysis, Run 20269
77942 02/26/04 21:20 Falk Analysis problems : 20250, 20253
77937 02/26/04 20:15 finn "Fast SEE" Test
77934 02/26/04 18:55 nakahara Beam: RHWP/IA/PZT done DAQ crash repeatedly
77933 02/26/04 18:55 dmckee GMS prescales misset
77926 02/26/04 17:20 jianglai more wiggling of LTD cables/disable GMS events
77917 02/26/04 15:42 Neven Day Shift Summary
77916 02/26/04 15:33 dmckee GMS HowTo available
77913 02/26/04 14:44 dmckee Backing out of French DNL setup.
77908 02/26/04 13:15 jianglai NA normal configuration restored
77905 02/26/04 12:09 nakahara Are 20226-20228 really PS4 = max??
77904 02/26/04 12:00 gaskell moller target limit switch
77901 02/26/04 11:45 smithg Target: Analysis of the target gas purity
77899 02/26/04 10:40 Rutledge Beam Cav Monitor Attenuation
77896 02/26/04 09:39 saw g0ana rebooted and upgraded
77888 02/26/04 08:07 Quém& Inetraged results from 20225 to 20248
77887 02/26/04 08:03 Quém& G0 Integrity Pass1 files
77886 02/26/04 08:02 Quém& Night shift summary
77884 02/26/04 07:59 Quém& Coil pulsing short manual
77883 02/26/04 07:32 Williamson Charge asymmetry width versus laser phase noise
77880 02/26/04 06:21 Spayde/Queme Spikes Observed in Online TOF
77877 02/26/04 06:03 Quém& tons of medm processes running on XT9 terminal
77872 02/26/04 04:04 vardan SMS IOC rebooted
77870 02/26/04 04:03 Falk 120 Hz analysis, Run 20244
77865 02/26/04 03:14 Williamson Run Plan for Thursday 02-26-2004
77862 02/26/04 03:04 Falk Integrated charge asymmetries ....
77859 02/26/04 02:49 Falk G0 Integrity Pass1 files
77856 02/26/04 01:24 Gzero Bad integrity for run 20239
77853 02/26/04 00:39 vardan target: pt8 change
77849 02/26/04 00:02 J. Secrest Shift Summary
Wednesday
77848 02/25/04 23:44 Falk Halo Monitors
77847 02/25/04 23:39 Falk BPM/BCM Screens
77846 02/25/04 23:37 Falk Halo Monitors
77841 02/25/04 22:07 Secrest This is a Coil Pulsing Run-OK--Not JUNK
77840 02/25/04 21:54 Falk 120 Hz Analysis, Run 20229
77837 02/25/04 20:57 Secrest Power cycled caen crate
77833 02/25/04 19:55 secrest junk
77832 02/25/04 19:54 secrest junk
77831 02/25/04 19:54 secrest junk
77830 02/25/04 19:54 secrest junk
77818 02/25/04 19:03 Secrest End run failed for run 20229
77814 02/25/04 18:42 Secrest runs 20226-20228 PS4=Max
77809 02/25/04 17:07 jianglai Frame lumi scan summary
77807 02/25/04 16:51 jianglai Beam: BPM/BCM calibrations summary
77804 02/25/04 15:47 neven Day Shift Summary
77803 02/25/04 15:37 saw Target: Check Archiver button on target controls updated
77799 02/25/04 15:06 saw G0 Cage temperatures rising
77790 02/25/04 13:57 gaskell moller target HV interlock
77788 02/25/04 13:40 saw Target: Target archiver not working
77784 02/25/04 12:04 jianglai BPM/BCM calibration program postphoned
77778 02/25/04 11:11 nakahara Beam: RHWP/IP scan
77777 02/25/04 10:50 Rutledge Beam: Beam Modulation Scripts.
77776 02/25/04 10:37 Sarah/Nakaha HV trips/ HV interlock problems
77775 02/25/04 10:33 Sarah Moller Measurement Summary
77773 02/25/04 10:30 Sarah Finishing Moller measurement
77772 02/25/04 10:09 Sarah Injector parameters during Moller run 48472
77770 02/25/04 10:03 Sarah Injector parameters during Moller run 48471
77768 02/25/04 09:57 Sarah Injector Parameters during Moller Run 48470
77767 02/25/04 09:55 Sarah IHWP state changed to IN
77765 02/25/04 09:46 Sarah Injector parameters during Moller run 48469
77763 02/25/04 09:42 Sarah Injector Parameters during Moller run 48468
77761 02/25/04 09:25 Sarah Starting Moller again
77759 02/25/04 08:18 Sarah No beam for a bit...
77757 02/25/04 08:03 Quém& Night Shift Summary
77756 02/25/04 08:02 Sarah Setting up for Moller Measurement
77755 02/25/04 08:02 Quém& Integrity files for runs 20209-20212
77751 02/25/04 07:49 Quém& Itegrated analysis results for runs 20202 through 20212
77750 02/25/04 07:47 Sarah Injector Parameters before Moller Measurement
77743 02/25/04 04:08 vardan SMS IOC rebooted
77739 02/25/04 03:10 Falk G0 Integrity Pass1 files
77738 02/25/04 02:42 Falk Integrated charge asymmetry ....
77737 02/25/04 02:32 Falk 120 Hz analysis, Run 20206
77734 02/25/04 01:59 Williamson Run Plan for Wednesday 02-25-2004
77733 02/25/04 01:46 vardan target alarm on diff. pressure
77732 02/25/04 01:39 vardan SMS IOC alarm
77723 02/25/04 00:51 Williamson RC Summary Monday 02-23-2004 Swing, Tuesday 02-24-2004 Owl and Day
77722 02/25/04 00:01 Falk Halo monitors
77721 02/25/04 00:01 Williamson Beam: New (preliminary) halo target positions
77719 02/25/04 00:00 finn swing shift summary
77718 02/25/04 00:00 Falk BPM/BCmM Screens
Tuesday
77715 02/24/04 23:19 Falk Run 20133 'good for"
77712 02/24/04 22:02 Williamson Beam: New nominal beam positions
77711 02/24/04 21:57 pking NA errors in 8th LTD of crate 2; okay now.
77708 02/24/04 21:49 Williamson Beam: Beam hard to position at 40 uA
77707 02/24/04 21:42 Williamson Beam: Plots made during the beam steering marathon today
77706 02/24/04 21:25 pking Changes in the automatic analyzers.
77705 02/24/04 21:10 Jianglai sample plots of "spiky" French ToFs, new realtime display
77698 02/24/04 19:47 Slaughter shift checklist
77697 02/24/04 19:30 Sarah New Halo Target Hole Center Positions (Preliminary)
77696 02/24/04 19:29 Sarah New Halo Target Hole Center Positions (Preliminary)
77639 02/24/04 18:07 smithg Beam: Steering efforts today, harp scan log
77638 02/24/04 17:55 finn begin halo studies
77637 02/24/04 17:49 finn harp scan completed
77636 02/24/04 17:29 Sarah/Rutled Beam: Halo Rates during Coil Modulation
77633 02/24/04 16:05 neven Day Shift Summary
77627 02/24/04 12:47 Pking I have rebooted g0ana
77626 02/24/04 11:15 smithg Target: Gt1,2,&3 ITC problem fixed
77620 02/24/04 09:43 pking "db_replay_status.pl" is missing on gzero account; recovered it from CVS.
77618 02/24/04 09:38 smithg Target: Target out. Target ioc rebooted.
77616 02/24/04 08:48 Ent BPM last(?) time
77615 02/24/04 08:03 Quém& Night shift summary
77604 02/24/04 04:49 Carlini Beam: BPM Calibration Offsets
77600 02/24/04 04:01 Falk Integrated charge asymmetry ....
77599 02/24/04 03:59 Quém& DAQ crash
77598 02/24/04 03:51 Falk G0 Integrity Files
77597 02/24/04 03:44 Falk G0 Integrity Files Pass1
77592 02/24/04 02:47 Falk 120 Hz analysis, Run 20154
77585 02/24/04 00:52 Williamson Rolf's test of the BPM offsets
77582 02/24/04 00:24 Williamson Run Plan for Tuesday 02-24-2004
77581 02/24/04 00:07 Falk BPM/PCM Screens
77580 02/24/04 00:01 Falk Halo Monitor
Monday
77578 02/23/04 23:59 Armstrong Swing Shift Log - very good beam...
77575 02/23/04 23:38 Falk Helium bottle replaced
77574 02/23/04 22:47 Williamson RC Summary Saturday 02-22-2004 Swing, Sunday 02-23-2004 Owl and Day
77569 02/23/04 21:50 Armstrong BTA software fixed
77568 02/23/04 21:26 Armstrong BTA software problem
77565 02/23/04 20:57 Sarah SMS: Magnet IOC Rebooted Again!
77564 02/23/04 20:44 nakahara Beam: Parity cuts and no parity cuts
77563 02/23/04 20:10 Sarah Target: Target IOC will need to be rebooted
77562 02/23/04 20:07 Armstrong Owl shift ABU 3rd try...
77560 02/23/04 19:57 Armstrong Owl shift ABU hours, 2nd try
77558 02/23/04 19:49 Armstrong ABU hours from owl shift
77557 02/23/04 19:36 pking The first run using the new EPICS dictionary was 20148.
77556 02/23/04 19:26 Sarah/Armstr SMS: Magnet IOC reboot
77555 02/23/04 19:16 Armstrong BPM C20 y diff. explained
77548 02/23/04 18:20 pking Tried a new SDB, then switched back to the old one.
77547 02/23/04 18:19 Armstrong y position differences
77546 02/23/04 18:13 pking Updated the EPICS dictionary for the data stream.
77545 02/23/04 18:11 Armstrong charge asymmetry widths
77542 02/23/04 17:21 Williamson Beam: Determining the Survey Offsets of the BPMs
77541 02/23/04 17:20 Armstrong Halo snapshot
77533 02/23/04 15:59 smithg Target: tgt motion on day shift
77532 02/23/04 15:56 Neven Day Shift Summary
77530 02/23/04 15:49 smithg Beam: Met with Arne & Matt re steering issues
77528 02/23/04 15:45 Neven IOC20 Reboot
77525 02/23/04 14:55
77514 02/23/04 12:04 saw Run Summaries
77513 02/23/04 12:03 saw G0Integrity Files - 04:00 to 12:00
77512 02/23/04 11:59 saw Added more EPICS atributes for last 5 BPMS
77511 02/23/04 11:58 nakahara Beam: Relative orbits in HallC
77509 02/23/04 11:13 smithg Beam: Beam has been badly mis-steered since noon yesterday
77506 02/23/04 09:48 horn Moller: Polarization Feb Overview
77505 02/23/04 09:25 horn Moller Run Summary
77504 02/23/04 09:05 horn Moller done
77498 02/23/04 08:35 horn Injector parameters during moller measurement
77495 02/23/04 08:08 horn moller setup
77494 02/23/04 08:02 G. Qué Night Shift Summary
77492 02/23/04 07:59 horn pre-moller injector parameters
77480 02/23/04 04:04 Moffit G0Integrity Files
77478 02/23/04 04:03 Moffit Run Summaries
77475 02/23/04 03:48 Moffit Rates in FR octants... g0realtime monitor
77473 02/23/04 03:05 Moffit More FR alerts..
77470 02/23/04 02:30 Moffit BCM/BPM screens
77469 02/23/04 02:21 Moffit Change in halo rates
77468 02/23/04 02:19 Moffit NA and FR errors.
Sunday
77460 02/22/04 23:57 dmckee Swing shift summary
77456 02/22/04 22:47 vanoers/mcke Target IOC crash
77447 02/22/04 21:34 Williamson Run Plan for Monday, February 23, 2004
77446 02/22/04 20:42 Williamson RC Summary Report, Saturday/Sunday February 22, 2004
77443 02/22/04 19:34 nakahara run summary
77432 02/22/04 16:46 nakahara Wiggling cables
77431 02/22/04 16:17 nakahara Target: g0cagetemp stripchart started
77428 02/22/04 16:07 gaskell day shift summary
77426 02/22/04 15:19 Gzero Shift worker checklist scan
77418 02/22/04 13:35 nakahara Beam: IA voltage slowly drifting off
77416 02/22/04 12:59 gaskell beam position
77413 02/22/04 12:16 gaskell coil modulation
77410 02/22/04 11:52 Falk G0Integrity files
77409 02/22/04 11:36 Falk Integrated charge asymmetry.....
77408 02/22/04 11:22 gaskell power cycled octant 2 HV again
77406 02/22/04 11:22 Falk G0Integrity Pass1 files
77400 02/22/04 09:35 gaskell power cycled octant 2 HV
77399 02/22/04 09:26 Sarah Change in high alarm limits for cage temperatures
77393 02/22/04 08:01 biselli night shift summary
77388 02/22/04 07:25 Falk fr_alerts
77387 02/22/04 07:21 Falk fr_alerts
77386 02/22/04 06:51 Falk BPM /BCM monitors
77385 02/22/04 06:44 Falk Halo Monitors
77384 02/22/04 06:39 Falk Analysis of 120 Hz run 20100
77381 02/22/04 06:00 Falk Relatively high TDC hits (2nd octant, ring 8)
77380 02/22/04 05:36 Falk na_errors on MISC screen
77375 02/22/04 04:18 biselli temperatures in the electronics cage
77372 02/22/04 03:55 Moffit Re: Integrated HC differences
77371 02/22/04 03:54 Moffit Integrated HC differences..
77370 02/22/04 03:50 Moffit G0Integrity Pass1 Files
77369 02/22/04 03:49 Moffit G0Integrity Files
77365 02/22/04 02:48 Moffit BCM/BPM screens
77356 02/22/04 00:01 dmckee Swing shift summary
Saturday
77354 02/21/04 23:57 Moffit Relatively High TDC Hits (2nd octant, ring 08)
77353 02/21/04 23:20 Kuhn LTD errors
77352 02/21/04 23:15 Williamson Run Plan for Sunday, February 22, 2004
77349 02/21/04 22:46 Moffit NA Errors in MISC g0realtime monitor
77348 02/21/04 22:44 Williamson RC Summary, Friday/Saturday, 2/21
77346 02/21/04 22:02 smithg Beam: Plots, analysis, & thoughts about recent harp scans
77341 02/21/04 19:34 Slaughter run 20089 integrity
77340 02/21/04 19:02 Slaughter 120 Hz run 20084
77337 02/21/04 18:50 Slaughter G0 Integrity Files 12:00-19:00
77334 02/21/04 17:49 dmckee Left DAQ in 120 Hz mode
77322 02/21/04 15:53 Carlini Day Shift Sumary
77321 02/21/04 15:18 pking G0 cage temperature status.
77320 02/21/04 15:16 slaughter bpm screen
77317 02/21/04 14:36 nakahara Target: HPH not restored after IOC reboot
77316 02/21/04 14:07 nakahara Target: Target IOC stuck but no alarm
77313 02/21/04 13:33 nakahara Beam: 20080: wrong feedback parameter for 20 mins
77312 02/21/04 13:01 nakahara Beam: RHWP/IA/PZT
77308 02/21/04 12:08 nakahara HV trip
77307 02/21/04 12:04 gaskell moller run summary
77306 02/21/04 11:55 nakahara Target: Moving target into beam.
77305 02/21/04 11:55 gaskell Moller done - backing out
77301 02/21/04 11:28 gaskell half wave plate change to OUT
77298 02/21/04 11:09 gaskell epics during moller run
77296 02/21/04 11:07 Falk Integrated charge asymmetries ....
77295 02/21/04 10:57 Falk G0Integrity Pass1 files
77294 02/21/04 10:49 gaskell beam is back
77292 02/21/04 09:52 gaskell no beam for a while
77291 02/21/04 09:44 nakahara Target: Target out of beam
77290 02/21/04 09:36 gaskell moller set up
77289 02/21/04 09:31 gaskell injector epics before moller
77288 02/21/04 09:12 Falk Shift check list
77284 02/21/04 08:04 biselli night shift summary
77278 02/21/04 06:42 Falk BPM/BCM screens
77277 02/21/04 06:31 Falk na_errors and fr_alerts
77276 02/21/04 06:03 Falk 120 Hz analysis
77273 02/21/04 05:42 Falk fr_alerts
77270 02/21/04 05:18 Falk na_errors and Fr_alerts
77269 02/21/04 04:41 biselli halo rates during coil pulsing
77261 02/21/04 04:01 Moffit G0Integrity Pass1 Files
77260 02/21/04 04:00 Moffit G0Integrity Files
77257 02/21/04 02:33 M Jones Helium bottle changed
77256 02/21/04 02:29 Moffit BPM/BCM Screens
77253 02/21/04 01:55 Moffit NA errors (Octants 3 and 7)- g0realtime MISC
77250 02/21/04 00:42 M Jones Target IOC reboot
77246 02/21/04 00:08 dmckee Swing shift summary
Friday
77245 02/20/04 23:50 Moffit Beam: larger noise in Tiger phase..
77244 02/20/04 23:31 Moffit Rebooted g0ana
77243 02/20/04 23:28 Williamson Run Plan for Saturday, February 21, 2004
77242 02/20/04 23:27 Williamson Run Plan for Saturday, February 21, 2004
77241 02/20/04 23:26 dmckee coil pulsing halo monitor activity
77233 02/20/04 21:00 Williamson RC Summary, Thursday/Friday 02/20/04
77232 02/20/04 20:56 nakahara/van Target: Target IOC crash
77229 02/20/04 19:47 S. Bailey G0 Integrity_Pass Files
77228 02/20/04 19:45 S. Bailey G0Integrity files
77225 02/20/04 19:16 S. Bailey Integrated Helicity Correlated Differences
77224 02/20/04 18:41 S. Bailey 120 Hz run 20057
77210 02/20/04 15:34 S. Bailey BPM screen capture
77209 02/20/04 15:21 Carlini Day Shift Summary
77208 02/20/04 15:01 Lars/Paul Target: VXI/CAMAC crate temperature alarms added
77205 02/20/04 14:27 pking G0 cage temperatures; reconnected the large fan in the back of the racks.
77204 02/20/04 13:41 kaz Detector rates all out of range
77201 02/20/04 13:15 Louis Deadtime MT detector 205
77199 02/20/04 13:00 Kuhn LTD error cables
77198 02/20/04 12:54 nakahara 20052 is NOT production
77193 02/20/04 12:23 Carlini Beam: Chao's Test Plan
77192 02/20/04 12:22 nakahara coil modulation done. MCC moving to Chao's test
77190 02/20/04 12:09 Sarah Beam: Halo rates with and without 6mm hole target
77187 02/20/04 11:45 Falk G0 Integrity files
77185 02/20/04 11:27 nakahara Beam: Feedback off
77183 02/20/04 11:17 Carlini Beam: Steady Production Running
77182 02/20/04 11:12 Falk Integrated charge asymm....
77181 02/20/04 10:56 Falk G0 Integrity files
77176 02/20/04 09:03 Falk 120 hz Run 20043
77174 02/20/04 08:53 nakahara Detector trip
77171 02/20/04 07:57 Falk Halo Rates
77169 02/20/04 07:54 biselli nigght shift summary
77164 02/20/04 07:36 Lars
77163 02/20/04 07:29 Falk BPM Screen
77158 02/20/04 06:42 Louis Spikes in 19391
77155 02/20/04 05:47 biselli Beam position
77152 02/20/04 05:31 arvieux s-dmch alerts
77144 02/20/04 03:54 Moffit G0Integrity Files
77137 02/20/04 01:13 Moffit Beam: BPM/BCM Screens
77135 02/20/04 00:43 Williamson Run Plan for Friday, 02-20-04
77133 02/20/04 00:38 Moffit French Alert in MISC realtime monitor
77131 02/20/04 00:00 dmckee Owl shift summary
Thursday
77128 02/19/04 22:39 Moffit High CFD TDC Hits in Octant 2, Ring 16
77125 02/19/04 22:08 Moffit Analysis: 120Hz for run 20029
77118 02/19/04 20:33 vanoers Target: gpt7 Target Alarm
77115 02/19/04 20:00 nakahara Run summary
77110 02/19/04 17:18 nakahara BPM/BCM screenshot
77109 02/19/04 16:57 nakahara Beam: RHWP/IA/PZT
77106 02/19/04 16:38 saw Logging of g0 cage temperatures and g0 halo rates fixed
77105 02/19/04 16:38 Serge (Take 10, get one free) RC Summary report Wdnesday/Thursday 02/19
77104 02/19/04 16:15 jianglai adjusted lumi HVs, removed attenuator on lumi7
77101 02/19/04 16:00 Sarah Target: Target summary
77100 02/19/04 16:00 Sarah Target: Target summary
77098 02/19/04 15:38 Spayde SMS: Updated Magnet Control Computer Build Instructions
77097 02/19/04 15:23 saw HV file label fix
77096 02/19/04 15:04 breuer checked gain O5-10BL >> OK
77094 02/19/04 14:44 Carlini BPM offsets & restores
77093 02/19/04 14:30 jroche maximum current on HV file updated
77092 02/19/04 13:51 Serge Not a hardware limit
77091 02/19/04 13:24 quinn More on DNL stability for NA electronics
77087 02/19/04 12:45 Breuer clarification: new HV implemented Wed 02/19/04 near 21:00
77086 02/19/04 12:39 jroche this is a test
77085 02/19/04 12:10 Sarah Target: HPH Parameter change
77084 02/19/04 12:08 Spayde SMS: Magnet at Full Current
77083 02/19/04 11:41 Louis Anomaly deadtime run 19896
77082 02/19/04 11:30 Falk Shift check list
77081 02/19/04 11:08 Sarah IHWP state changed to IN
77080 02/19/04 10:47 Louis Spikes on run 19391
77079 02/19/04 10:26 Spayde SMS: Control Computing Status
77078 02/19/04 10:17 Falk Integrated charge asymmetry ....
77077 02/19/04 09:59 gaskell moller analyzer fix
77076 02/19/04 09:53 Falk G0 Integrity results
77075 02/19/04 09:33 gaskell updated epics BCM calibration
77072 02/19/04 09:19 Sarah Moller Measurement Study
77071 02/19/04 09:13 Sarah Backing out of Moller Measurement
77070 02/19/04 09:03 Sarah Injector Parameters during Moller Measurement
77068 02/19/04 08:58 Sarah Injector Parameters during Moller Measurement
77066 02/19/04 08:50 Sarah Injector Parameters during Moller measurement
77065 02/19/04 08:48 Spayde SMS: Ramping Magnet Down
77063 02/19/04 08:43 Sarah Injector Parameters during the Moller Measurement
77061 02/19/04 08:38 Sarah Injector Parameters during the Moller measurement
77058 02/19/04 08:14 Rutledge Target: Target move - Target speed.
77057 02/19/04 08:12 Sarah Setting up for Moller Measurement
77056 02/19/04 08:02 Sarah Injector Parameters before Moller
77054 02/19/04 07:59 Kuhn Owl shift summary
77051 02/19/04 07:47 Kuhn No beam
77047 02/19/04 05:55 Kuhn LTD errors on the offline hist
77041 02/19/04 03:59 Kuhn Beam positions
77040 02/19/04 03:59 Secrest G0Integrity Report
77039 02/19/04 03:53 Kuhn Beam position at G0 and G0B
77038 02/19/04 03:36 Kuhn BCM during beam recovery
77037 02/19/04 03:31 Kuhn Beam is back at 40uA
77035 02/19/04 03:20 Kuhn IOC reboot
77034 02/19/04 02:59 Kuhn Halo after IOC reboot
77033 02/19/04 02:14 M Jones Target IOC reboot
77031 02/19/04 02:10 nakahara Beam: PITA/RHWP/IA/PZT and Wrong feedback medm
77030 02/19/04 01:57 Kuhn DNL stability
77027 02/19/04 00:49 Kuhn Run #20014 is junk
77024 02/19/04 00:22 Kuhn Halo monitor screenshot
77023 02/19/04 00:21 Kuhn BCM screenshot
77022 02/19/04 00:20 Kuhn BPM screenshot
77021 02/19/04 00:02 dmckee owl shift summary
Wednesday
77017 02/18/04 23:22 Serge RC Summary (yes no hurrah today) Tuesday/Wednesday 2/18
77015 02/18/04 23:00 Secrest HV on 4-16-FL, 4-16-FR, 2-16-FR tripped
77013 02/18/04 22:55 Rutledge Target: Target move and HPH parameter Change
77011 02/18/04 22:39 dmckee Beam: Harp scans complete
77009 02/18/04 22:31 jianglai/sec Beam: new beam monitor calibration
77004 02/18/04 21:18 Secrest Updated HV on detectors
77002 02/18/04 20:56 Sarah Logging of BPM and BCM screens
77000 02/18/04 20:49 Rutledge Target: Target Moved out of beam
76998 02/18/04 20:43 dmckee Beam: BCM1 gain setting changed
76997 02/18/04 20:38 Sarah G0Integrity_Pass1 Run Summary
76996 02/18/04 20:38 Breuer gain of detector o5-10BL, again
76995 02/18/04 20:30 Sarah G0Integrity for noon - 20:00 shift
76994 02/18/04 19:36 nakahara Beam: abu and parity quality
76991 02/18/04 18:56 nakahara Beam: Data from last night without 19991
76989 02/18/04 18:24 dmckee Correction to run 20008 runinfo:
76982 02/18/04 16:40 dmckee BAck out of French DNL config
76978 02/18/04 16:17 dmckee Setting up for French DNL
76976 02/18/04 15:38 Carlini Beam: Day Shift Summary
76973 02/18/04 14:36 Carlini Beam: Accelerator problems
76971 02/18/04 14:16 nakahara Backing out of FR DNL + config status
76966 02/18/04 13:21 nakahara Target: Moving target out of beam
76965 02/18/04 12:59 Domi Lin. Diff. parameters for DMCH3 (slot9) has been corrected
76962 02/18/04 12:38 nakahara 19991 has no feedback
76960 02/18/04 12:36 Carlini Beam: Reason the BPM Setting Change after an IOC crash
76959 02/18/04 12:31 nakahara DNL runs
76956 02/18/04 12:07 Breuer power cables of CPU etc moved yesterday
76952 02/18/04 11:56 Breuer reboot g0ana last eveing
76949 02/18/04 11:35 Falk Integrated charge, position asymmetries
76946 02/18/04 11:11 Falk G0 Integrity checks from complete analysis
76944 02/18/04 10:31 Falk G0 Integrity checks
76943 02/18/04 10:29 nakahara Beam gone for beam studies
76937 02/18/04 09:23 nakahara SMS: G0SMS IOC
76936 02/18/04 09:21 Serge Run plan for Wednesday 02/18
76935 02/18/04 09:04 nakahara Target: Target diff. pressure spikes
76934 02/18/04 08:46 nakahara Lost 30 mins to no data-taking
76932 02/18/04 08:42 nakahara Target: Target IOC crash
76930 02/18/04 08:05 Biselli night summary shift
76929 02/18/04 08:03 Kuhn LTDs and online-monitoring
76921 02/18/04 04:08 Kuhn LTD errors
76917 02/18/04 03:49 Secrest BPM screen
76916 02/18/04 03:48 Secrest G0Integrity Synopsis
76915 02/18/04 02:53 biselli beam position
76914 02/18/04 02:50 biselli halo rates
76912 02/18/04 02:38 Biselli Beam tuning
76909 02/18/04 00:53 Williamson SMS: Magnet Ramp-up Failure
76908 02/18/04 00:09 secrest Integrated asymmetries for day shift
Tuesday
76907 02/17/04 23:59 dmckee Owl shift summary
76906 02/17/04 23:46 Serge :-)) RC Summary Monday/Tuesday 02/18
76904 02/17/04 23:32 Secrest G0Integrity Synopsis for Day Shift
76903 02/17/04 23:21 dmckee SMS current for run 19989
76902 02/17/04 22:31 dmckee Beam position problems, a possible explanation
76899 02/17/04 21:53 Breuer o2-14FL/FR HV cables restored
76898 02/17/04 21:48 Rutledge Magnet Up; Beam?
76897 02/17/04 21:30 secrest Det16Oct2 BL TDC hits low for gain calib
76894 02/17/04 20:54 Rutledge Magnet ramp to 4700
76890 02/17/04 20:11 Breuer o2-14FL/FR HV cables exchanged
76889 02/17/04 20:04 dmckee Beam position
76887 02/17/04 19:50 Gzero 120 Hz analysis run 19968
76883 02/17/04 19:39 Breuer runplan for amplitude (HV) calibration runs
76882 02/17/04 19:16 Rutledge coil modulation bug
76879 02/17/04 18:51 beaufait ups failure
76869 02/17/04 16:54 Slaughter shift checklist
76866 02/17/04 16:49 Serge Missing shift summary
76865 02/17/04 16:39 Slaughter logged bpm & bcm
76864 02/17/04 16:27 Serge Rate of trip
76855 02/17/04 14:17 jianglai One more potential task for shift worker: run_summary checks
76851 02/17/04 13:38 Slaughter Halo snapshot
76850 02/17/04 13:31 Armstrong/Sl CFD on O2D16BL seems high
76846 02/17/04 12:20 pking Cleaning up raw data directories.
76841 02/17/04 11:20 Falk G0 Integrity checks
76838 02/17/04 11:07 nakahara Suggested addition to BCM/BPM calibration procedure
76837 02/17/04 11:04 Falk 120 Hz analysis, Run #19968
76834 02/17/04 10:30 nakahara Beam: RHWP changed
76833 02/17/04 10:18 Falk Integrated asymmetries
76830 02/17/04 09:45 Serge Run plan for Tuesday 02-17
76827 02/17/04 09:30 horn IHWP OUT
76826 02/17/04 09:29 horn Moller Summary
76825 02/17/04 09:20 horn Moller done
76821 02/17/04 08:52 horn Injector Parameters during moller
76817 02/17/04 08:36 nakahara Target: Target is out of beam
76815 02/17/04 08:18 horn Setup for Moller
76814 02/17/04 08:10 Kuhn Owl shift summary
76811 02/17/04 08:01 Kuhn No beamstudies
76810 02/17/04 07:59 horn Injector Parameters before Moller
76807 02/17/04 06:58 Kuhn G0 BPM display
76804 02/17/04 05:44 Kuhn Halo monitor screenshot
76803 02/17/04 05:43 Kuhn BCM screenshot
76802 02/17/04 05:42 Kuhn BPM screenshot
76794 02/17/04 04:03 Moffit G0Integrity Files...
76793 02/17/04 03:51 Kuhn IOC reboot
76790 02/17/04 02:33 Moffit Analysis: 120Hz analysis, run 19959
76787 02/17/04 01:44 Moffit Analysis: 120Hz analysis, run 19958
76785 02/17/04 01:03 Kuhn Halo target
76783 02/17/04 00:57 Kuhn IOC reboot
76782 02/17/04 00:40 Kuhn nominal beam positions
76781 02/17/04 00:29 Kuhn Halo rates
76780 02/17/04 00:28 Kuhn BCM screenshot
76779 02/17/04 00:27 Kuhn BPM screenshot
76777 02/17/04 00:09 dmckee Swing shift summary
Monday
76772 02/16/04 23:39 dmckee Halo target and coil modulation runs.
76765 02/16/04 21:51 nakahara Target: gpt5 alarm lowered .
76762 02/16/04 21:04 nakahara Target: gpt3 alarm setpoint lowered
76759 02/16/04 19:49 Sarah G0Integrity files
76754 02/16/04 18:34 Sarah BPM and BCM snapshots
76753 02/16/04 18:20 Serge (delighted) RC Summary Sunday/Monday 02/16
76750 02/16/04 17:29 Sarah Halo rates Snapshot
76747 02/16/04 16:59 dmckee run 19947 is coil modulation
76746 02/16/04 16:05 vulcan Day shift summary
76742 02/16/04 16:00 Sarah Beam: Halo rates for this afternoon
76733 02/16/04 13:12 Sarah/Vulcan Snapshot of BCM
76724 02/16/04 10:22 falk New helium bottle
76723 02/16/04 10:13 vulcan lost beam gui
76722 02/16/04 10:01 vulcan beam down
76720 02/16/04 08:37 Serge Run plan for Sunday 02/16
76718 02/16/04 07:58 biselli night shift summary
76711 02/16/04 04:55 jianglai Beam: changed Aq feedback parameters
76696 02/16/04 00:43 jianglai shift checklist scan
76694 02/16/04 00:21 jianglai bcm/bpm
76691 02/16/04 00:10 jianglai I accidentally hit the ROC 3 power switch
76689 02/16/04 00:05 Armstrong Swing Shift Summary: good beam!
Sunday
76687 02/15/04 23:47 Armstrong Halo snapshot
76684 02/15/04 23:29 jianglai Aq integration in the passed 10 hrs
76678 02/15/04 22:06 Armstrong Beam: Halo rates stabilized
76677 02/15/04 21:52 Armstrong ooops - forgot coil modulation
76669 02/15/04 19:04 saw SMS: G0 IOC rebooted
76668 02/15/04 18:19 saw Rebooted g0ioc4
76667 02/15/04 18:19 Armstrong IOC rebooted; beam back
76664 02/15/04 18:07 Armstrong IOC G0 off
76663 02/15/04 17:46 saw Test
76662 02/15/04 17:43 saw Test
76661 02/15/04 17:42 Armstrong Halo rate snapshot
76660 02/15/04 17:40 saw Test
76656 02/15/04 17:10 Serge (still happy) Run Coordinator Summary Saturday/Sunday 02/15
76652 02/15/04 16:58 Serge (still happy) Run Coordinator Summary Saturday/Sunday 02/15
76650 02/15/04 16:09 vulcan day run summary
76646 02/15/04 15:29 nakahara Data efficiency
76645 02/15/04 15:09 saw Beam: ibcm from last midnight
76644 02/15/04 14:57 saw Moller HV reconfigured
76641 02/15/04 14:37 saw Analysis of 120Hz run 19919
76630 02/15/04 11:56 Spayde G0 HV Tripped Off
76628 02/15/04 11:33 nakahara Beam: IHWP IN, no IA/PZT scan
76624 02/15/04 11:27 Spayde G0 Apparatus Production Conditions Restored
76623 02/15/04 11:26 Spayde BCM2 Gain Setting Restored
76621 02/15/04 11:23 Spayde Moller Summary
76619 02/15/04 11:01 Spayde Beam: IHWP Inserted
76612 02/15/04 10:06 Spayde Changed Gain of BCM2 for Moller
76611 02/15/04 10:03 Spayde Injector Settings Before Moller
76610 02/15/04 10:02 vulcan coil modulation
76606 02/15/04 09:49 Serge Run plan for Sunday 02/15
76603 02/15/04 08:36 vulcan halo target
76601 02/15/04 08:07 Kuhn Owl Shift summary
76598 02/15/04 07:41 Spayde Beam: Parity Quality for (Roughly) the Last 24 Hours
76594 02/15/04 05:43 Kuhn Beam was off
76593 02/15/04 05:40 Kuhn Halo rates
76592 02/15/04 05:39 Kuhn BPM snapshot
76587 02/15/04 05:20 Kuhn Halo rates
76582 02/15/04 03:33 Domi BCM snapshot
76581 02/15/04 03:32 Domi BPM snapshot
76580 02/15/04 03:17 Kuhn Problems
76577 02/15/04 02:52 Domi Too much alerts : MT rates ...
76576 02/15/04 02:50 Domi Too much alerts....
76575 02/15/04 02:49 Kuhn accidental reboot of ROC3
Saturday
76568 02/14/04 23:56 Roos Swing Shift Summary
76567 02/14/04 23:49 Domi Golden values for beam positions need to be updated
76564 02/14/04 23:31 Domi O1D8FL/O5D10BL update
76563 02/14/04 22:55 Domi Halo rates snapshot
76562 02/14/04 22:50 Domi BCM snapshot
76561 02/14/04 22:49 Domi BPM snapshot
76559 02/14/04 22:29 Breuer paddle anode current full target
76558 02/14/04 20:24 Domi Run 19897 : Too much FR alerts related to O6D16FL HV OFF
76552 02/14/04 19:54 Breuer HV change o5-16BL and 01-08FL
76549 02/14/04 18:56 Breuer directly measured detector anode currents
76547 02/14/04 18:47 Breuer o1-08FL trouble
76546 02/14/04 18:43 Breuer octant 05 det 10BL
76545 02/14/04 18:39 beaufait Target: target alarms
76542 02/14/04 18:31 Roos Coil Pulsing Warning
76540 02/14/04 18:24 gaskell col pulsing run - retract halo target!!
76533 02/14/04 16:49 gaskell checklists
76532 02/14/04 16:45 gaskell checklist scan
76531 02/14/04 16:38 Serge (happy again) RC Summary Friday/Saturday 02/14
76530 02/14/04 16:33 gaskell bcm/bpm grab
76527 02/14/04 15:57 vulcan Day shift summary
76525 02/14/04 14:42 gaskell correction - Dave can't do math
76524 02/14/04 14:37 gaskell HV trip again
76520 02/14/04 14:18 gaskell HV trip
76519 02/14/04 14:07 gaskell HV tripped
76518 02/14/04 14:03 vulcan temp fix
76517 02/14/04 14:02 vulcan cage temp
76516 02/14/04 13:58 gaskell Hall B polarization
76514 02/14/04 13:18 nakahara Beam: Aq_integration followup2
76512 02/14/04 13:14 gaskell halo control ioc reboot
76511 02/14/04 13:04 gaskell dead iocs
76509 02/14/04 12:12 gaskell coil modulation and beam trips
76504 02/14/04 11:53 Spayde Halo Improvement Followup
76503 02/14/04 11:52 Spayde Rebooted g0ana
76502 02/14/04 11:43 Spayde Halo Snapshot
76501 02/14/04 11:36 Spayde BCM Log
76500 02/14/04 11:35 Spayde BPM Log
76498 02/14/04 10:50 Spayde Beam: Parity Quality Since Midnight
76496 02/14/04 10:47 Spayde/Lars Beam: Aq_integration Script Followup
76494 02/14/04 09:57 Serge Run plan for Saturday 02/15
76493 02/14/04 09:34 Spayde Beam: Results and Confusion from Aq_integration Script
76492 02/14/04 08:55 vulcan No beam
76490 02/14/04 08:44 Serge/Wim Hygiene ...
76486 02/14/04 08:18 Spayde Problems with Octant 5 Detector 10 BL
76485 02/14/04 08:01 Kuhn Owl shift summary
76483 02/14/04 07:56 biselli Target: rebootin sms ioc
76481 02/14/04 07:23 Spayde Production Runs Are Replaying Correctly
76478 02/14/04 06:35 Kuhn Beam position during coil modulation
76471 02/14/04 04:58 Kuhn Halo rates
76468 02/14/04 04:46 Kuhn Halo rates
76467 02/14/04 04:40 Kuhn Halo rates
76466 02/14/04 04:18 Domi/Spayde Still problem replaying production runs...
76464 02/14/04 04:02 Domi Halo Rates snapshot
76463 02/14/04 04:01 Domi BCM Snapshot
76462 02/14/04 04:00 Domi BPM Snapshot
76461 02/14/04 03:52 Kuhn g0ana
76456 02/14/04 02:22 Domi 120z Analysis of run 19875 : no 60Hz
76455 02/14/04 01:40 Kuhn LTD errors
76454 02/14/04 01:36 Kuhn Errata for run #19875 run info
76447 02/14/04 01:00 Kuhn BPM nominal values
76446 02/14/04 00:48 Kuhn Halo rates
76445 02/14/04 00:19 nakahara Beam: Some more comments
76444 02/14/04 00:06 nakahara Beam: PZT slopes
76442 02/14/04 00:05 nakahara Beam: Beam feedback problems
76441 02/14/04 00:03 Roos Swing shift summary
Friday
76434 02/13/04 20:52 Domi BCM Snapshot
76433 02/13/04 20:51 Domi BPM Snapshot
76430 02/13/04 19:31 Serge (Happy) RC Summary Thursday/Friday 02/12-13
76429 02/13/04 19:22 roos Hall B beam feedthrough
76428 02/13/04 19:19 nakahara Beam: IA/PZT
76422 02/13/04 18:22 gaskell moller target limit switch
76421 02/13/04 18:12 beaufait Target: back to h2 target
76420 02/13/04 18:00 gaskell moller run summary
76414 02/13/04 17:28 gaskell putting HWP OUT
76413 02/13/04 17:23 nakahara SMS: Rebooted SMS
76409 02/13/04 17:07 gaskell moller set up
76408 02/13/04 16:58 beaufait Target: target out of beam
76407 02/13/04 16:51 horn Setting up for moller
76406 02/13/04 16:40 Serge HALO rates after beam steering test plan
76405 02/13/04 16:38 Gzero BPM after steering test plan
76404 02/13/04 16:13 Lung Shift summary
76402 02/13/04 15:56 saw Reboot g0ioc4
76399 02/13/04 13:58 Lung BPM values mis-labelled on 1/25/04 entry
76398 02/13/04 13:47 Serge Run Plan for Friday the 13th !!!
76397 02/13/04 13:46 nakahara Coil modulation and beam trips
76396 02/13/04 13:29 nakahara Beam: Summary of feedback runs: IHWP OUT
76395 02/13/04 13:27 nakahara Beam: Bug report and corrected integration plots: IHWP IN
76389 02/13/04 12:03 nakahara Beam: Summary of feedback runs: IHWP IN
76387 02/13/04 11:39 nakahara Beam: Automated IA/PZT
76386 02/13/04 11:15 Lung Beam halo test plan
76381 02/13/04 10:16 Lung Run end questionable
76379 02/13/04 09:39 beaufait ups failure
76378 02/13/04 09:29 Lung Hall C power glitch #2
76376 02/13/04 09:23 nakahara Beam: Beam spotsize harp scan from Jan/Feb
76375 02/13/04 08:57 nakahara Beam: Overnight integrated beam params.
76373 02/13/04 08:54 Lung High trip rate
76371 02/13/04 08:10 Spayde Rack Power Loss Follow Up
76369 02/13/04 08:07 Kuhn Owl shift summary
76368 02/13/04 07:44 Kuhn Loss of power
76366 02/13/04 07:22 biselli Target: problems related to the loss of network connection
76363 02/13/04 05:29 Kuhn BPM screenshot after adjustment
76362 02/13/04 05:28 Spayde Beam: Y Differences Not Converging to Zero
76356 02/13/04 04:03 Kuhn Errors for FR det
76354 02/13/04 04:01 Kuhn Run with NA threshold = 3
76346 02/13/04 03:16 Domi Halo Rates snapshot
76345 02/13/04 02:59 Domi Check List Scan
76343 02/13/04 02:33 Domi No hits in some ADC channels
76341 02/13/04 02:29 Domi BCM snapshot
76340 02/13/04 02:28 Domi BPM snapshots
76339 02/13/04 01:24 pking Changed the analysis disk data deletion script.
76336 02/13/04 01:07 Roos Swing Shift Summary
76335 02/13/04 01:02 Kuhn Halo rates
Thursday
76331 02/12/04 23:52 jroche Target: target ioc reboot
76326 02/12/04 22:26 Domi BCM snapshot
76325 02/12/04 22:24 Domi BPM Snapshot
76322 02/12/04 21:55 Domi Coil pulsing conditions
76318 02/12/04 21:40 Domi 11mm halo target back in
76317 02/12/04 21:40 Domi After G0A reboot : 11mm halo target was found retracted
76313 02/12/04 21:07 Domi Rates of O2D16FL, O1D8FL, O5D10BL
76312 02/12/04 20:22 jroche Hv turned on during run #19847
76310 02/12/04 20:20 jroche Beam: started the beam feedback
76308 02/12/04 20:18 jroche Beam: RIP scans during run#19847
76307 02/12/04 19:49 jroche Target: lh2 target in beam
76306 02/12/04 19:49 roos more Halo stuff
76304 02/12/04 19:33 jroche Beam: bpm readings when the beam position is almost ok and also the halo
76303 02/12/04 19:21 roos Halo continued/go to LH2
76302 02/12/04 18:34 Gzero HaLO
76301 02/12/04 18:02 Test
76300 02/12/04 17:56 Pking Klaus has the DAQ On-Call pager.
76299 02/12/04 17:42 gaskell moller discriminator
76294 02/12/04 17:25 M Jones Hall C beam energy measurement
76288 02/12/04 17:21 Serge RC Summary 02-12 Wednesday/Thursday
76286 02/12/04 17:10 pking G0 BPM EPICS history shows problem with positions started 8 Feb.
76285 02/12/04 17:05 Lung Shift Summary II
76283 02/12/04 16:37 Lung Shift Summary
76280 02/12/04 16:11 Lung Run probably not at 120 Hz
76271 02/12/04 15:07 saw Logging of BPM values
76270 02/12/04 15:07 Domi Reminder : since run 19800 cables to FrAm DMCH Octants 3/7 det. 14/15 are shorter
76269 02/12/04 14:44 Breuer Paddle current changes empty target, ref. full
76267 02/12/04 14:27 Lung Still tuning.....
76266 02/12/04 14:10 Sarah Halo7 and Halo8 unplugged from HV crate
76265 02/12/04 13:50 Lung Beam back
76264 02/12/04 13:33 Lung Wien angle adjustment
76263 02/12/04 13:22 jianglai Switched to LH2 replay flags.
76260 02/12/04 12:58 Domi Configuration Event is fixed
76258 02/12/04 12:40 saw Remove /cache on Hall C macines
76256 02/12/04 12:29 Spayde FPD HV On
76255 02/12/04 12:28 Spayde SMS: Magnet at Full Current
76243 02/12/04 11:50 Serge Run plan for Thursday 02/12
76239 02/12/04 11:30 vanoers Target motion alarm
76237 02/12/04 10:37 Spayde SMS: Magnet Ramped Down
76234 02/12/04 10:03 vanoers Target Motion
76233 02/12/04 10:01 Pking Follow-up on gzerol3 disk problem.
76232 02/12/04 10:00 Domi Updated ddr (HF0,HF1) files according to board changes from yesterday
76231 02/12/04 09:31 Domi Config event problem comes from the crl file
76230 02/12/04 09:12 Lung No Beam
76228 02/12/04 09:07 Spayde Removing Files from Raw Data Disks
76225 02/12/04 08:14 Spayde/pking Data Disk Followup
76224 02/12/04 08:04 Kuhn Owl shift summary
76216 02/12/04 06:29 Spayde Data Disk Filling Up
76214 02/12/04 05:42 Spayde Low Rates in Octant 5 Detector 10 Back Left
76213 02/12/04 05:30 Kuhn comments for runs 19822 to 19828
76212 02/12/04 05:28 Domi Config event problem : need more investigation
76196 02/12/04 04:02 Domi BCM snapshot
76195 02/12/04 04:01 Domi BPM snapshot
76194 02/12/04 03:43 Kuhn problems
76193 02/12/04 03:32 Domi HV crate 38 power cycled
76190 02/12/04 03:20 biselli Target: rebooted sms ioc again
76189 02/12/04 03:20 Domi O8D16FR : HV tripped
76188 02/12/04 03:16 Domi Alerts from DMCH10 in run 19818
76184 02/12/04 03:13 Domi Rates from O8D16FR are more that twice higher than FL, BR, BL
76179 02/12/04 02:29 biselli Target: rebooted sms ioc
76178 02/12/04 02:01 Kuhn RunControl: End run failed
76174 02/12/04 01:41 nakahara Beam: Beam feedback ON
76172 02/12/04 01:38 nakahara Beam: IA/PZT scans after beam restored
76170 02/12/04 01:33 Domi Configuration event problem : update
76169 02/12/04 01:00 Kuhn BPM screenshot
76168 02/12/04 00:59 Kuhn Halo rate monitor
76167 02/12/04 00:54 Kuhn We're back
76165 02/12/04 00:33 Kuhn pulsed beam
76164 02/12/04 00:33 Kuhn KGB parameters
76163 02/12/04 00:28 Domi Problem with the FR configuration event
76162 02/12/04 00:24 Kuhn cdaql1
76159 02/12/04 00:09 Phil Roos Swing shift summary
Wednesday
76156 02/11/04 21:51 roos No Beam
76154 02/11/04 21:08 Phil Halo target (11mm) IN
76152 02/11/04 20:58 Gzero Beam: IA/PZT at 40uA
76147 02/11/04 19:37 Domi FR electronics : thresholds files updated according to new DMCH/slots set up
76145 02/11/04 18:14 Serge Run Coordinator Summary : 02/10 (Tuesday-Wednesday)
76142 02/11/04 17:58 Serge Check with scope ; 2-14-FL and 2-12-FR
76137 02/11/04 17:08 Domi MT-TDC O2D2Back is back...
76136 02/11/04 16:59 Domi No MT-TDC from O2D12 Back
76134 02/11/04 16:33 smithg Target: Stuck the LH2 tgt in
76129 02/11/04 15:57 Vulcan Day shift summary
76118 02/11/04 13:33 Domi Lin. Diff. Optimization : DMCH 1 in slot 11
76116 02/11/04 13:29 Gzero Lin. Diff. Optimization (plot) : DMCH 2 in slot 10
76115 02/11/04 13:24 Domi Lin. Diff. Optimization : DMCH 2 in slot 10
76114 02/11/04 13:20 Domi Lin. Diff. Optimization : DMCH 3 in slot 9
76113 02/11/04 13:12 Domi Lin. Diff. Optimization : DMCH 4 in slot 8
76112 02/11/04 13:02 Domi Lin. Diff. Optimization : DMCH 7 in slot 6
76111 02/11/04 12:59 Domi Lin. Diff. Optimization : DMCH 6 in slot 5
76110 02/11/04 12:55 Domi Results for DMCH8 in slot 3 : erratum
76109 02/11/04 12:46 Domi Lin. Diff. Optimization : DMCH 5 in slot 4
76108 02/11/04 12:38 Domi Lin. Diff. Optimization : DMCH 8 in slot 3
76107 02/11/04 12:33 Domi Lin. Diff. Optimization : DMCH9 in slot 2
76106 02/11/04 12:01 Domi DAQ is running upstairs in the electronics cage
76105 02/11/04 11:42 Serge Run plan for Wednesday 02/11
76104 02/11/04 11:27 Rutledge Target filled with LH2 - Ready for beam
76103 02/11/04 10:46 nakahara Beam: feedback slopes website
76102 02/11/04 10:45 nakahara Beam: Beam feedback slopes website updated
76100 02/11/04 09:51 Sarah IHWP setting changed back to IN
76099 02/11/04 09:41 nakahara BPM/BCM screenshot
76098 02/11/04 09:34 vulcan target
76097 02/11/04 09:28 Sarah/Tanja IHWP setting change to out position
76096 02/11/04 09:27 Sarah/Tanja Summary of Moller Runs
76095 02/11/04 09:10 Sarah/Tanja Backing out of Moller measurement
76091 02/11/04 08:52 Sarah/Tanja Injector parameters during Moller measurement
76089 02/11/04 08:45 Rutledge Target removed from beam
76087 02/11/04 08:31 Sarah/Tanja Preparing for Moller measurement
76086 02/11/04 08:25 Sarah/Tanja Injector parameters before Moller measurement
76083 02/11/04 07:56 Kuhn Owl shift summary
76081 02/11/04 07:45 Kuhn Beam is back
76080 02/11/04 07:07 Kuhn No beam for approx 1hr
76078 02/11/04 06:43 Kuhn Lost beam
76071 02/11/04 05:02 Kuhn IOC update
76070 02/11/04 05:02 nakahara Beam: New beam integration script
76069 02/11/04 04:56 Kuhn IOC SE20 update
76068 02/11/04 04:38 Kuhn IOC SE20 crash
76064 02/11/04 03:49 jianglai/gsm late entry: confusing harp scan results
76063 02/11/04 03:48 nakahara SMS: LHe level low again
76062 02/11/04 03:25 jianglai SMS helium level low alarm
76059 02/11/04 02:46 jianglai checklist scan
76055 02/11/04 01:39 jianglai exhange helium bottom
76054 02/11/04 01:13 jianglai bpm/bcm
76047 02/11/04 00:19 Kuhn Feedback convergence
76046 02/11/04 00:08 Domi Swing shift summary
Tuesday
76044 02/10/04 23:52 nakahara SMS: LHe level low alarm
76043 02/10/04 23:45 smithg Target: Low density/Hi Temp Running
76039 02/10/04 23:16 jianglai magnet alarm
76033 02/10/04 21:23 jianglai about the energy lock
76032 02/10/04 21:16 jianglai LTD cable wiggling
76024 02/10/04 19:29 Domi More on beam steering
76022 02/10/04 18:52 Serge Run Coordinator summary (Sunday-Tuesday)
76019 02/10/04 17:23 jroche new HV file : taking care of oct2 det 12
76017 02/10/04 16:26 Domi No beam for 15 minutes
76016 02/10/04 16:18 vulcan Day shift summary
76015 02/10/04 16:18 jroche no meanning for Vmon in the HV files
76014 02/10/04 16:16 Rutledge G0 SMS IOC Reboot
76011 02/10/04 15:38 nakahara Beam: Summary: Helicity magnets and IA/PZT
76008 02/10/04 15:12 nakahara Beam: Automated IA/PZT results
76007 02/10/04 15:02 Serge Run plan for Tuesday 02/10
76006 02/10/04 14:27 nakahara Beam: MHE0L03V also shows double peak.
76005 02/10/04 14:22 nakahara Beam: MHE0L03H shows double peak in x in hallC
76004 02/10/04 14:16 nakahara Beam: Double peak for helicity magnet MHE0L02H
76002 02/10/04 13:09 gaskell spin dance results - new Wien angle setting
76001 02/10/04 12:50 vulcan Connectorization
76000 02/10/04 12:43 gaskell moller run summary
75999 02/10/04 12:38 gaskell moller backout
75977 02/10/04 09:22 horn Setting up for Moller
75975 02/10/04 09:11 Kuhn YO pathlength study
75971 02/10/04 08:49 gaskell pre-moller injector params
75964 02/10/04 08:04 Kuhn Owl shift summary
75963 02/10/04 07:46 Kuhn Feedback convergence
75949 02/10/04 03:58 jianglai put attenuator on Lumi7
75944 02/10/04 02:16 Kuhn No beam
75942 02/10/04 02:05 biselli Target: closed JT valve 1%
75940 02/10/04 01:46 jianglai BPM position weirdness??
75937 02/10/04 01:20 Domi DNL Runs 19760 and 19761 : HV half-gain...
75936 02/10/04 01:19 biselli Target: opened JT valve 1%
75935 02/10/04 01:11 jianglai late entry, harp scan abandoned
75934 02/10/04 00:57 jianglai 11mm halo rates/ bpms
75933 02/10/04 00:52 jianglai bpm/bcm screenshots
75932 02/10/04 00:46 jianglai Full sets of Lumis
75931 02/10/04 00:43 Kuhn No data in TOF for Det2 Octs 3 and 7
75929 02/10/04 00:22 biselli Target: moving empty target in
75928 02/10/04 00:20 Armstrong Swing Shift Summary
75927 02/10/04 00:17 Armstrong 6 mm Halo target - no luck
Monday
75925 02/09/04 23:49 Armstrong CW beam; positions good
75923 02/09/04 21:49 Armstrong BPMs back!
75922 02/09/04 21:37 Armstrong correction to start run comments:target out
75921 02/09/04 21:24 Armstrong try to run without G0, G0B
75919 02/09/04 21:00 Sarah Beam: Upper limits for Halo3 and Halo4
75918 02/09/04 20:57 Armstrong new nominal halo positions
75917 02/09/04 20:56 smithg Beam: Raised harp scan beam current limit
75916 02/09/04 20:28 Armstrong G0 and G0B BPM problems
75915 02/09/04 19:59 Armstrong pulsed beam coming
75913 02/09/04 19:20 jianglai Beam: BPM behaviors last night, projected beam position on target
75911 02/09/04 19:01 dmckee G0 Genral tools beam energy update
75906 02/09/04 17:29 pking Automatic coil modulation is possible, but disabled.
75902 02/09/04 16:38 Serge RC run plan for Monday/Tuesday 02/09-10
75899 02/09/04 16:14 vulcan Halo7,8
75898 02/09/04 16:10 Rutledge Target parameter fluctuations
75897 02/09/04 16:07 vulcan shift summary
75896 02/09/04 15:27 Spayde SMS: Vacuum Pumps On Again (late entry)
75895 02/09/04 15:24 Spayde SMS: Magnet at Full Current
75894 02/09/04 15:05 Spayde Magnet HV Interlock Restored
75893 02/09/04 14:44 pking Status of GMS triggering tests.
75873 02/09/04 12:27 jianglai adjusting grey noise box PMT discriminator threshold
75862 02/09/04 12:03 Spayde Backed out NA DNL Electronics Setup
75860 02/09/04 11:51 jianglai Lumi 7 installed
75859 02/09/04 11:32 Spayde SMS: Vacuum Pumps Off for Tour Group
75858 02/09/04 11:20 jyun/Sarah halo 7 and 8 IN
75857 02/09/04 11:02 Spayde NA MT 1-4 Plugged into WNFM
75850 02/09/04 10:38 pking UN-/Re-plugged CLK cables for LTDs 6-8 of crate 2.
75849 02/09/04 10:15 Spayde Hall C IOCs in Forced Gain Mode
75848 02/09/04 09:51 Vulcan/Spayd Hall in Restricted Access
75847 02/09/04 09:49 Spayde NA MT 5-8 Plugged into WNFM
75845 02/09/04 09:25 nakahara Beam: Beam profile
75844 02/09/04 09:20 Spayde Full Gain HV on Detectors
75843 02/09/04 09:11 Spayde SMS HV Interlock Disabled
75842 02/09/04 09:10 Spayde SMS: Ramping Magnet Down
75840 02/09/04 08:41 Rutledge Target Movement
75838 02/09/04 08:02 dmckee Owl shift summary
75833 02/09/04 06:46 dmckee Run 19735 was a 120 Hz run
75823 02/09/04 04:01 secrest scan in of shift checklist
75822 02/09/04 03:49 secrest BPM screen shot
75818 02/09/04 03:24 dmckee Beam position weirdness
75809 02/09/04 00:12 Dale shift report, swing shift Feb 8, 2004
Sunday
75806 02/08/04 23:40 grimm rebooted g0ana
75805 02/08/04 23:10 jianglai Beam: BCM/BPM calibration how-to --- new instructions (much shorter)
75801 02/08/04 22:07 smithg bcm plot
75799 02/08/04 22:06 smithg bpm plots
75798 02/08/04 22:00 smithg Target: Weird PID problem.
75789 02/08/04 20:13 smithg Target: beam hitting tgt. Also more of Silviu's weird thing.
75786 02/08/04 18:26 nakahara Beam: Beam noise back to normal
75781 02/08/04 16:21 Domi Day Shift summaruy
75780 02/08/04 16:11 nakahara Beam: Beam noise problem
75778 02/08/04 15:56 Domi Oscillations observed in He Flow : Cryo person has been contacted
75773 02/08/04 14:56 nakahara Beam: No zero crossing in RHWP, y noise large
75772 02/08/04 14:49 nakahara Beam: IHWP is IN
75767 02/08/04 11:41 Gzero BPM and BCM screens
75763 02/08/04 10:23 silviu target: odd hph-PID
75756 02/08/04 08:00 dmckee Owl Shift Summary
75752 02/08/04 07:25 jianglai deleting some old data files on gzerol3
75749 02/08/04 05:24 dmckee/jiang What is the beam energy, really?
75740 02/08/04 04:25 jianglai cranked up the NA grey noise rate
75733 02/08/04 01:44 jianglai ACC down, cryo problems
75729 02/08/04 01:01 Jianglai/Mck iocse14 exercise
75726 02/08/04 00:00 Armstrong Swing Shift Summary
Saturday
75725 02/07/04 23:51 Pitt/Armstro Beam: Halo Fraction at 20 uA
75723 02/07/04 23:37 grimm HV.hvc contains wrong Vmon values
75720 02/07/04 22:51 Armstrong Halo snapshot - 6 mm hole
75717 02/07/04 22:29 Armstrong Halo snapshot - no halo target
75715 02/07/04 22:22 Armstrong Halo snapshot
75709 02/07/04 21:58 grimm TLD results 01/08 - 02/02, new TLDs installed
75705 02/07/04 19:59 Armstrong More on Octant 2 Det 12 FR
75702 02/07/04 19:27 Armstrong beam back
75701 02/07/04 18:51 Armstrong beam off to work on Hall B
75700 02/07/04 18:50 Armstrong Start/End run overhead
75697 02/07/04 18:41 Domi O2D12 FR shows higher rate compared to FL
75696 02/07/04 18:21 Armstrong NA LTD error rate
75689 02/07/04 16:15 pking Shift summary: day, 7 Feb.
75676 02/07/04 13:50 pking DAQ problems; restarted CODA
75671 02/07/04 12:38 silviu checklist scan
75668 02/07/04 12:03 silviu beam:bpm/bpm log
75667 02/07/04 11:37 pking Resumed data taking at 11:30.
75665 02/07/04 10:55 pking HV interlock tripped during beam tuning; HV is still off.
75664 02/07/04 10:33 nakahara Beam: Feedback/PQB seems fine
75663 02/07/04 10:26 pking Halo target was out since about 08:00; restored now.
75662 02/07/04 10:08 pking Checking & clearing LTD errors.
75661 02/07/04 09:58 pking Beam taken for Hall B tuning.
75656 02/07/04 08:25 jroche owl summary
75655 02/07/04 08:02 jroche my big mess
75652 02/07/04 07:36 jroche run 196745 is coil pulsing
75651 02/07/04 07:36 jroche run 19674 is junk
75644 02/07/04 07:10 jroche Beam: halo rates
75643 02/07/04 07:09 jroche Beam: beam screens for check list
75642 02/07/04 06:48 jianglai Target: reboot SMS IOC
75639 02/07/04 05:29 jroche errors in det 12 octant 3 and 7 : still going on
75637 02/07/04 04:35 jroche no beam for a while
75624 02/07/04 00:10 Pitt/Hanneli Swing shift summary
Friday
75619 02/06/04 22:14 Lars ran data deletion script
75614 02/06/04 21:06 Pitt Beam taken away for orbit checks
75609 02/06/04 20:31 pking Restarted the automatic analysis processes.
75608 02/06/04 20:08 pking DAQ problems this afternoon/evening; partial diagnosis of problems in runs 19656 and 19658.
75607 02/06/04 19:44 Pitt Y beam position fixed
75605 02/06/04 19:35 Pitt Y beam position shift
75604 02/06/04 19:34 Lars manually turned on HP and Grey noise box HV
75602 02/06/04 19:30 Lars/Mark power cycled halo/lumi HV crate
75599 02/06/04 19:13 Lars Target: somewhat unstable 15 K coolant
75596 02/06/04 18:14 Lars Target: opened JT to 12.7%
75595 02/06/04 18:07 Lars Target: coolant in temp rising
75594 02/06/04 18:03 grimm Run plan for the weekend
75585 02/06/04 16:19 Sarah cdaql3 rebooted again
75584 02/06/04 16:18 Sarah Day Shift Summary
75579 02/06/04 15:34 Sarah/PKing cdaql3 rebooted again
75578 02/06/04 14:58 Rutledge Target out of beam
75577 02/06/04 14:58 Sarah/Rutled Halo calibration complete
75564 02/06/04 13:42 Sarah/Rutled Beam: Unstable beam
75562 02/06/04 13:14 jyun halo pmt harp plot for run 19598
75560 02/06/04 12:51 Rutledge Halo position scan
75559 02/06/04 12:49 Sarah/PKing cdaql3 rebooted
75557 02/06/04 12:38 Sarah DAQ Computer is frozen
75556 02/06/04 12:36 Rutledge Halo Target Scans Ver. 2
75555 02/06/04 12:18 Rutledge Halo Position Scan Full target
75554 02/06/04 11:57 Rutledge halo position scan
75548 02/06/04 11:38 Rutledge halo position scans 6mm
75545 02/06/04 11:35 pking Restarted automated analysis.
75541 02/06/04 11:32 Rutledge halo position scans 6mm
75534 02/06/04 11:26 Rutledge halo positon scans 6mm
75531 02/06/04 11:23 Rutledge halo position scans 6mm
75525 02/06/04 11:15 Rutledge halo position scans 6mm
75520 02/06/04 11:10 Rutledge halo position scans 6mm
75511 02/06/04 10:53 Rutledge halo position scans 6mm
75507 02/06/04 10:50 Rutledge halo position scans 6mm
75504 02/06/04 10:48 Rutledge halo position scans 6mm
75501 02/06/04 10:43 Rutledge halo position scan
75498 02/06/04 10:41 Rutledge halo position scans
75495 02/06/04 10:39 Rutledge halo positon scans
75493 02/06/04 10:36 Rutledge halo position scans
75489 02/06/04 10:32 Rutledge halo position scans
75486 02/06/04 10:28 Rutledge Halo positions scans
75483 02/06/04 10:27 Rutledge Halo position scans
75481 02/06/04 10:25 Rutledge Halo Target scans
75477 02/06/04 10:22 Rutledge Halo target scans
75474 02/06/04 10:17 Rutledge Halo position scans
75472 02/06/04 10:15 Rutledge Halo position Scans
75467 02/06/04 10:08 Rutledge Halo position scans
75456 02/06/04 09:28 Rutledge Target out of Beam
75455 02/06/04 09:26 Sarah Starting Halo Target Survey Scan
75453 02/06/04 08:11 Spayde Owl Shift Summary
75449 02/06/04 07:36 nakahara Target: Target valve not OK for beam alarm
75439 02/06/04 04:50 nakahara helicity signal in HallC
75435 02/06/04 03:58 nakahara Beam: Position feedback problem
75431 02/06/04 03:24 nakahara Beam: beam position feedback
75430 02/06/04 02:25 Spayde Halo Rate Snapshot Missing Picture
75429 02/06/04 02:23 Spayde Halo Rate Snapshot (20 uA, 11 mm halo target, empty target in)
75427 02/06/04 02:16 nakahara Beam: G0auto_iapzt fix
75426 02/06/04 02:10 Spayde Halo Rate Snapshot (20 uA, 11 mm halo target in, G0 target out)
75425 02/06/04 02:06 Spayde Halo Rate Snapshot (20 uA, no halo or G0 target)
75424 02/06/04 02:02 Spayde Halo Rate Problem
75423 02/06/04 02:02 nakahara Target: target out of beam
75421 02/06/04 01:32 nakahara Beam: RHWP/IA/PZT
75420 02/06/04 01:22 nakahara Target: empty target is in
75410 02/06/04 00:01 Armstrong Swing Shift Summary
75409 02/06/04 00:00 nakahara/lar HV trip and card change
Thursday
75407 02/05/04 23:47 Lars HV off
75406 02/05/04 23:39 Lars 7-16 BL HV trip
75404 02/05/04 23:35 Lars HV ON, overvoltage error on 4-16 FL
75403 02/05/04 23:26 Armstrong Beam off - RF sep. problems
75402 02/05/04 23:24 pking LTD errors are fixed, for now...
75400 02/05/04 23:11 grimm INFO: use g0log only as gzero on a linux PC
75399 02/05/04 23:11 Armstrong Harp scans
75395 02/05/04 23:03 grimm snapshot 3C dipoles
75393 02/05/04 22:53 grimm snapshot quads 3C region, lock on again ?!
75392 02/05/04 22:52 Armstrong Halo rate snapshot
75391 02/05/04 22:51 Armstrong grumble about mouse
75390 02/05/04 22:48 jianglai Beam: beam feedback code fix
75389 02/05/04 22:45 Armstrong 6 mm Halo target - rates too high
75388 02/05/04 22:20 Armstrong Herbert paddle reference
75387 02/05/04 22:14 Armstrong go to 6mm Halo target
75386 02/05/04 21:51 Armstrong halo rates seem good
75385 02/05/04 21:47 Lars Jianglai fixed g0realtime problem
75384 02/05/04 21:19 Armstrong beam is back
75382 02/05/04 21:06 Lars SMS: has been ramped up to 5000 A
75381 02/05/04 20:20 Lars SMS: ramping up to 5000 A
75380 02/05/04 20:16 pking Some LTD error lights and trying to clear them.
75379 02/05/04 20:09 pking Last run analyzed with v0.29 was 19596.
75378 02/05/04 20:08 pking Correction to comment about analyzers.
75377 02/05/04 19:43 grimm Run Plan Friday 02-06-2004
75376 02/05/04 19:27 Armstrong updated HV files...
75375 02/05/04 19:27 jroche I wrote entry 75374
75374 02/05/04 19:23 Gzero HV update for French detectors 16
75373 02/05/04 19:08 Lars scanned shift checklist
75370 02/05/04 18:17 pking Updated G0Analysis and G0Scripts on g0ana/etc.
75369 02/05/04 17:44 Lars updated good_for table
75368 02/05/04 17:14 grimm Beam update, maybe very late this evening
75367 02/05/04 17:13 grimm Halo + Lumi HV is ON, FPD HV is still OFF
75365 02/05/04 16:53 grimm Halo target is OUT
75363 02/05/04 16:48 Lars & Silvi Target: ready for beam
75354 02/05/04 14:22 gaskell ramped up moller solenoid
75351 02/05/04 12:21 pking More cleaning up gzero directory on gzerol3/g0ana/cdaql1/cdaql2/cdaql3
75350 02/05/04 11:08 pking Cleaning up gzero directory on gzerol3/g0ana/cdaql1/cdaql2/cdaql3
75349 02/05/04 10:47 pking Cleaning up data link directory on g0ana/cdaql1/cdaql2.
75347 02/05/04 09:36 Spayde SMS: JT Controller Calibration Transfer Procedure
75346 02/05/04 09:35 Spayde SMS: Spare JT4 Controller Calibrated
75345 02/05/04 09:13 grimm intermittent beam in Hall C
75344 02/05/04 09:05 Spayde JT Controller Calibration Transfer Procedure
Wednesday
75338 02/04/04 17:42 smithg Target: Fine adjustment of tgt JT
75337 02/04/04 17:02 dmckee HV Interlock restored
75336 02/04/04 17:01 Spayde SMS: Magnet Work Addendum
75335 02/04/04 16:31 pking Restarted the anareaper and autoanalyzer processes.
75334 02/04/04 16:29 jroche battery : voltage inversion
75333 02/04/04 16:09 Spayde SMS: Magnet Work
75332 02/04/04 16:02 Spayde SMS: JT Valve Controller Spare Situation
75331 02/04/04 15:48 Spayde SMS: Warner Controller Modifications
75325 02/04/04 14:17 saw ABU formula adjustment
75318 02/04/04 11:46 Lars Target: helium bottle inventory
75317 02/04/04 11:03 pking Rebooting of g0ana.
75316 02/04/04 10:43 pking Changed the link for ROOT files on g0ana/cdaql1/cdaql2/cdaql3
75315 02/04/04 09:04 nakahara Beam: PZT response in the injector
75314 02/04/04 08:54 nakahara Helicity magnet induce position differences
75313 02/04/04 05:30 Louis DMCH 1 Ceasura (NPN cuts)
75312 02/04/04 05:09 Louis Ceasura of DMCH 1
Tuesday
75310 02/03/04 18:18 saw Rebooted hallcweb
75307 02/03/04 16:16 jyun injector bpm concern
75306 02/03/04 15:36 nakahara Injector DAQ changes
75305 02/03/04 15:34 nakahara Beam: Injector lasertable
75300 02/03/04 12:35 dmckee HV interlock disconnected (again)
75296 02/03/04 11:59 Lars Target: JT problem, but ok now
75291 02/03/04 10:11 gaskell more Moller - note from Matt Poelker
75290 02/03/04 09:48 pking Stopped anareaper and autoanalyzer processes on g0ana/cdaql1/cdaql2.
Monday
75288 02/02/04 17:11 gaskell more moller info
75287 02/02/04 15:14 Sarah Summary of Beam Polarization Measurements
75286 02/02/04 14:49 dmckee HV interlock restored
75281 02/02/04 12:34 dmckee HV interlock disconnected
75278 02/02/04 10:52 Lars & Silvi Target: adjusted JT and HPH
75277 02/02/04 09:02 Louis NPN cuts checks and CODA problems
75276 02/02/04 08:51 Spayde SMS: Ramping SMS Down
75274 02/02/04 08:20 jroche restricted access
75271 02/02/04 08:11 jroche owl shift summary
75262 02/02/04 07:50 Lars Target: out of beam & pump speed 36 Hz
75254 02/02/04 07:34 horn Moller Solenoid off
75241 02/02/04 06:43 jroche, secr Beam: correlation between halo rates and beam parameters
75240 02/02/04 06:14 jroche Beam: Halo rates versus time (the picture)
75239 02/02/04 06:12 jroche,secre Beam: oscillation in the halo reading
75226 02/02/04 01:23 jroche fpd HV were off during run 19552
75225 02/02/04 01:20 jroche test of the logbook
75224 02/02/04 01:14 jroche ethane alarm
75222 02/02/04 00:11 jianglai swing shift summary
Sunday
75220 02/01/04 23:24 nakahara Beam: IHWP OUT
75211 02/01/04 22:10 jianglai 1uA, GH2, fastbus run conditions
75210 02/01/04 22:06 nakahara Target: Target moved to empty target
75203 02/01/04 20:58 jianglai beam restored to 1uA
75201 02/01/04 20:43 jianglai beam off. MCC Fopt. Moving target to frame.
75191 02/01/04 16:10 smithg day shift summary
75189 02/01/04 16:01 Lars Target: magnet IOC health alarm added to alarmhandler
75186 02/01/04 15:15 smithg more corrector fallout?
75184 02/01/04 15:01 Rutledge Remove Zero Lenght runs
75181 02/01/04 14:19 pking Changed NA scaler cabling for Oct 3/7 detectors 5-8, 13-16; modifed decoding.
75178 02/01/04 13:29 gaskell ramp down moller solenoid Monday morning
75175 02/01/04 13:10 smithg Steering problem resolved at last
75167 02/01/04 11:54 nakahara Injector BPM swapping for Helicity magnet testing
75165 02/01/04 11:17 lee & smith bpm snapshot
75164 02/01/04 10:55 beise Target: Empty target back in the beam
75162 02/01/04 10:49 grimm resulys from Harp scan 3C17A
75161 02/01/04 10:41 grimm resulys from Harp scan G0and G0A
75153 02/01/04 10:08 lee Beam untweaked
75151 02/01/04 09:29 beise Target: target moved to "OUT" position
75150 02/01/04 09:13 lee Beam tweaking
75149 02/01/04 08:23 lee 6mm Halo target reinserted
75148 02/01/04 08:21 Beise EPICS archiver
75146 02/01/04 08:15 lee 11 mm Halo target inserted
75145 02/01/04 08:12 jroche owl shift summary
75144 02/01/04 06:07 lee Halo target retracted
75143 02/01/04 06:05 lee Beam "tweaking" needed after 6mm Halo target reinserted
75142 02/01/04 05:39 lee Beam off, CHL problem
75140 02/01/04 04:37 jroche Beam: the halo target was out
75135 02/01/04 02:14 jroche Beam: ioc se20 reboot, no bpm reading at end of run 19526
75129 02/01/04 01:26 jroche DAQ problem at the end of run 19523
75124 02/01/04 00:11 J. Liu swing shift summary