Jefferson Lab Hall C Logbook for December 10 - Full Listing

  • Main INDEX

    Friday

  • 212464 12/31/10 18:23  brads          re: silenced the low pressure gas alarm -- will reset tomorrow

  • 212463 12/31/10 16:31  mack           silenced the low pressure gas alarm

    • Thursday

  • 212462 12/30/10 16:20   brads         Reset gas system low pressure trip

  • 212461 12/30/10 14:24  brads          I'll come in  to reset it this afternoon

  • 212460 12/30/10 13:02  buddhini       Bypassed gas system.

    • Wednesday

  • 212459 12/29/10 15:02  brads          Gas system reset

  • 212458 12/29/10 14:07  brads          Hall C computers back online, again

  • 212457 12/29/10 12:08  dalton         Gas alarms

    • Tuesday

  • 212456 12/28/10 20:12  brads          Gas system looks good

  • 212455 12/28/10 20:07  brads          Hall C computers back online

    • Friday

  • 212454 12/24/10 11:14  smithg         late entry: powered off most everything

    • Thursday

  • 212453 12/23/10 17:04  rob            qwscannerctrl power strip switched off

  • 212452 12/23/10 15:24  dalton         Compton: and Moller VME and NIM crates turned off

  • 212451 12/23/10 15:22  dalton         Compton: Laser diode cooling initiated

  • 212450 12/23/10 14:42  jhlee          didn't check the scanner controller status

  • 212449 12/23/10 14:15  jhlee          I turned off qweakl3 now but the scannerctrl is still on

  • 212448 12/23/10 13:58  jhlee          Run 8459 is still analyzing

  • 212447 12/23/10 13:42  Leacock        Preradiated dslumis have 2Mohm preamp gain -- late entry

  • 212446 12/23/10 11:57  brads          Hall C computers will be shutdown on Dec. 26

  • 212445 12/23/10 11:55  Leckey         Gas System

  • 212444 12/23/10 11:47  AK Opper       R1 enclosure

  • 212443 12/23/10 10:04  cdaq           Beam Time Accounting

    • Wednesday

  • 212442 12/22/10 22:55  jhlee          re: re: TS0 has the following errors,

  • 212441 12/22/10 22:08  mack           BCM1,2 rack work today

  • 212440 12/22/10 20:19  cdaq           End of Run 8461: 

  • 212439 12/22/10 20:19  rakithab       Analysis: Updated the devel/Charge Feedback to the Revision 2349

  • 212438 12/22/10 20:17  cdaq           Run 8461: DAQ + Analyzer test

  • 212437 12/22/10 19:36  cdaq           End of Run 8460: 

  • 212436 12/22/10 19:22  cdaq           Run 8460: DAQ + Analyzer test

  • 212435 12/22/10 19:22  cdaq           End of Run 8459: 

  • 212434 12/22/10 18:10  brads          re: TS0 has the following errors, still 

  • 212433 12/22/10 18:04  brads          re: TS0 errors: 'ENOBUFS'

  • 212432 12/22/10 17:59  cdaq           Run 8459: DAQ + Analyzer test

  • 212431 12/22/10 17:43  cdaq           End of Run 8458: 

  • 212430 12/22/10 17:20  jhlee          TS0 has the following errors, still 

  • 212429 12/22/10 17:19  jhlee          turned off rotator pc also

  • 212428 12/22/10 16:24  jhlee          turned off mutiplex cards and low voltage power supply for region3

  • 212427 12/22/10 16:16  donjones       Compton: compton "stuff" turned off

  • 212426 12/22/10 15:53  rob            video multiplexing box has a buzzing alarm after a video feed is interrupted

  • 212425 12/22/10 15:47  jhlee          turned off tracking DAQ, qweakl1, and scannerpc

  • 212424 12/22/10 15:47  cdaq           Run 8458: DAQ + Analyzer test

  • 212423 12/22/10 15:43  rakithab       HV's turned OFF

  • 212422 12/22/10 15:36  cdaq           End of Run 8457: 

  • 212421 12/22/10 15:34  AK Opper       End of 2010 run

  • 212420 12/22/10 15:00  beaufait       hall shut down

  • 212419 12/22/10 14:55  cdaq           Run 8457: main detector LED run

  • 212418 12/22/10 13:16  smithg         vacuum back 

  • 212417 12/22/10 12:02  brads          re: Gas system back on

  • 212416 12/22/10 11:37  Leckey         Gas System Back On

  • 212415 12/22/10 11:34  brads          Shift checklists updated on DodCB, new pages in CH

  • 212414 12/22/10 10:57  Arshak         Compton: Compton Electron Detector QWADs Low Voltages are OFF.

  • 212413 12/22/10 08:30  AK Opper       Status

  • 212411 12/22/10 08:07  Nuruzzaman     Shift Summary: Owl shift summary 12/22/2010

  • 212410 12/22/10 08:06  cdaq           Beam Time Accounting

  • 212409 12/22/10 07:37  seva           snapshot General Tools&HV

  • 212408 12/22/10 07:28  Nuruzzaman     We turned OFF all the high voltages.

  • 212407 12/22/10 07:28  Adesh          ramped down QTOR, turned off HV

  • 212406 12/22/10 05:42  Nuruzzaman     Injector GUN failure, no Beam for OWL shift, most probably until next year.

  • 212405 12/22/10 01:39  rakithab       Analysis: devel/promptsummary Updated to revision 2347.

  • 212404 12/22/10 00:29  Ramesh         Shift Summary

  • 212403 12/22/10 00:27  cdaq           Beam Time Accounting

  • 212402 12/22/10 00:25  Ramesh         bcm double difference analysis

    • Tuesday

  • 212401 12/21/10 23:49  Armstrong      Beam Modulation - a closer look

  • 212400 12/21/10 23:39  jhoskins       Broken Modulation 

  • 212399 12/21/10 23:39  jhlee          Snapshot of General tools for shift check-list

  • 212398 12/21/10 23:16  jhlee          update promptsummary on cdaql4

  • 212397 12/21/10 23:05  Ramesh         Beam down for a couple of more hours

  • 212396 12/21/10 22:58  cdaq           End of Run 8456: 

  • 212395 12/21/10 22:36  Ramesh         Beam down due to a gun trip

  • 212394 12/21/10 22:02  Armstrong      Beam Modulation studies - abort

  • 212393 12/21/10 21:47  jhlee          Target moved to HOME=Out-of-Beam position

  • 212392 12/21/10 21:45  cdaq           Run 8456: BCM1/2 current scan

  • 212391 12/21/10 21:39  cdaq           End of Run 8455: 

  • 212390 12/21/10 20:22  Armstrong      Beam Modulation data-taking

  • 212389 12/21/10 20:09  cdaq           Run 8455: Modulation Detector Response Study

  • 212388 12/21/10 19:51  cdaq           End of Run 8454: 

  • 212387 12/21/10 19:39  cdaq           Run 8454: Modulation Detector Response Study

  • 212386 12/21/10 19:37  cdaq           End of Run 8453: 

  • 212385 12/21/10 19:36  cdaq           Run 8453: Modulation Detector Response Study

  • 212384 12/21/10 19:30  cdaq           End of Run 8452: 

  • 212383 12/21/10 19:23  cdaq           Run 8452: Modulation Detector Response Study

  • 212382 12/21/10 19:19  cdaq           End of Run 8451: 

  • 212381 12/21/10 19:09  cdaq           Run 8451: Modulation Detector Response Study

  • 212380 12/21/10 19:06  cdaq           End of Run 8450: 

  • 212379 12/21/10 19:05  cdaq           Run 8450: Modulation Detector Response Study

  • 212378 12/21/10 19:05  Ramesh         iocSE20 epics available on datastream only starting run  8447

  • 212377 12/21/10 19:01  cdaq           Run 8449: Modulation Detector Response Study

  • 212376 12/21/10 18:56  cdaq           End of Run 8447: 

  • 212375 12/21/10 18:52  jhlee          Snapshot of General tools for shift check-list

  • 212374 12/21/10 18:39  cdaq           Run 8447: Modulation Detector Response Study

  • 212373 12/21/10 18:36  cdaq           End of Run 8446: 

  • 212372 12/21/10 18:33  brads          R2/R3 gas system is down for the night

  • 212371 12/21/10 18:29  cdaq           Run 8446: Modulation Detector Response Study

  • 212370 12/21/10 18:18  cdaq           Run 8445: Modulation Detector Response Study

  • 212369 12/21/10 18:15  cdaq           End of Run 8444: 

  • 212368 12/21/10 17:56  cdaq           Run 8444: Modulation Detector Response Study

  • 212367 12/21/10 17:36  cdaq           End of Run 8443: 

  • 212366 12/21/10 17:05  Jiawei         RF Chokes installed for 12V leads for BCM1 and BCM2

  • 212365 12/21/10 17:04  cdaq           Run 8443: Modulation Detector Response Study

  • 212364 12/21/10 17:00  cdaq           End of Run 8442: 

  • 212363 12/21/10 16:54  cdaq           Run 8442: Modulation Detector Response Study

  • 212362 12/21/10 16:47  cdaq           Run 8440: Modulation Detector Response Study

  • 212361 12/21/10 16:30  cdaq           Run 8439: Modulation Detector Response Study

  • 212360 12/21/10 16:29  kamyers        Shift Summary: Day Shift Summary

  • 212359 12/21/10 16:26  cornejo        Snapshots of General tools and HV

  • 212358 12/21/10 16:21  cdaq           End of Run 8438: 

  • 212357 12/21/10 16:21  cdaq           Beam Time Accounting

  • 212356 12/21/10 16:19  cdaq           Run 8438: Modulation Detector Response Study

  • 212355 12/21/10 16:16  cdaq           End of Run 8437: 

  • 212354 12/21/10 16:13  cdaq           Run 8437: Modulation Detector Response Study

  • 212353 12/21/10 16:05  cdaq           End of Run 8436: 

  • 212352 12/21/10 15:59  cdaq           Run 8436: Modulation Detector Response Study

  • 212351 12/21/10 15:58  cdaq           End of Run 8435: 

  • 212350 12/21/10 15:54  cdaq           Run 8435: Modulation Detector Response Study

  • 212349 12/21/10 15:43  cdaq           End of Run 8434: 

  • 212348 12/21/10 15:36  cdaq           Run 8434: Modulation Detector Response Study

  • 212347 12/21/10 15:30  rob            scanner motion contoller: still working

  • 212346 12/21/10 15:29  cdaq           Run 8432: Modulation Detector Response Study

  • 212345 12/21/10 15:24  cdaq           End of Run 8431: 

  • 212344 12/21/10 15:20  cornejo        Target: Moved to DS 2% Al target

  • 212343 12/21/10 15:14  cdaq           Run 8431: Modulation Detector Response Study

  • 212342 12/21/10 15:08  kamyers        Target: target moved to home position

  • 212341 12/21/10 15:04  cdaq           Run 8429: junk

  • 212340 12/21/10 14:46  cdaq           End of Run 8428: 

  • 212339 12/21/10 14:45  kamyers        Target: scattering chamber vacuum back to nominal

  • 212338 12/21/10 14:28  mack/Jiawei    some tests at the BCM rack

  • 212337 12/21/10 14:24  cdaq           Run 8428: MD and lumi pedestal run

  • 212336 12/21/10 14:20  Jiawei         Target: DS 2% Al targe

  • 212335 12/21/10 13:52  kamyers        Analysis: bpm diffs for run 8397

  • 212334 12/21/10 13:39  kamyers        bcm 1 and 2 resolution

  • 212333 12/21/10 13:31  Ramesh         Re: IOCSE20

  • 212332 12/21/10 13:19  kamyers        Analysis: bcm double diffs for run 8398

  • 212331 12/21/10 12:51  cdaq           End of Run 8427: 

  • 212330 12/21/10 12:48  cdaq           Run 8427: Pair Coil Test Debugging

  • 212329 12/21/10 12:44  cdaq           End of Run 8426: 

  • 212328 12/21/10 12:43  cdaq           Run 8426: Pair Coil Test Debugging

  • 212327 12/21/10 12:36  cdaq           End of Run 8425: 

  • 212326 12/21/10 12:31  jhoskins       Error on TS0 terminal screen

  • 212325 12/21/10 12:25  kamyers        recent IOCSE20 gains off runs - junk?

  • 212324 12/21/10 12:25  cdaq           Run 8425: FFB/FF Modulation Studies

  • 212323 12/21/10 12:24  cdaq           End of Run 8424: 

  • 212322 12/21/10 12:14  cdaq           Run 8424: FFB/FF Modulation Studies

  • 212321 12/21/10 12:11  cdaq           End of Run 8423: 

  • 212320 12/21/10 12:05  jhlee          Run 8370 : BCM calibration Result

  • 212319 12/21/10 12:00  cdaq           Run 8423: FFB/FF Modulation Studies

  • 212318 12/21/10 11:59  cdaq           End of Run 8422: 

  • 212317 12/21/10 11:47  cdaq           Run 8422: FFB/FF Modulation Studies

  • 212316 12/21/10 11:44  cdaq           End of Run 8421: 

  • 212315 12/21/10 11:41  kamyers        Analysis: comparison of bcm1-2 dd width for gain 2 and gain 3

  • 212314 12/21/10 11:38  mack           interpretation of last nite's incremental improvement in BCM resolution

  • 212313 12/21/10 11:33  cdaq           Run 8421: FFB/FF Modulation Studies

  • 212312 12/21/10 11:32  cdaq           End of Run 8420: 

  • 212311 12/21/10 11:21  cdaq           Run 8420: FFB/FF Modulation Studies

  • 212310 12/21/10 11:04  cdaq           End of Run 8419: 

  • 212309 12/21/10 10:54  cdaq           Run 8419: FFB/FF Modulation Studies

  • 212308 12/21/10 10:52  cdaq           End of Run 8418: 

  • 212307 12/21/10 10:42  cdaq           Run 8418: FFB/FF Modulation Studies

  • 212306 12/21/10 10:38  cdaq           End of Run 8417: 

  • 212305 12/21/10 10:33  cdaq           Run 8417: FFB/FF Modulation Studies

  • 212304 12/21/10 10:29  cdaq           End of Run 8416: 

  • 212303 12/21/10 10:27  cdaq           Run 8416: modulation response

  • 212302 12/21/10 10:23  cdaq           End of Run 8415: 

  • 212301 12/21/10 10:12  cdaq           Run 8415: FFB/FF Modulation Studies

  • 212300 12/21/10 10:10  kamyers        Analysis: BCM1-2 double difference width vs current from run 8370

  • 212299 12/21/10 09:58  cdaq           End of Run 8414: 

  • 212298 12/21/10 09:56  cdaq           Run 8414: Modulation Response Characterization

  • 212297 12/21/10 09:51  cdaq           Run 8412: Modulation Response Characterization[junk]

  • 212296 12/21/10 09:49  cdaq           End of Run 8411: 

  • 212295 12/21/10 09:47  cdaq           Run 8411: Modulation Response Characterization

  • 212294 12/21/10 09:43  cdaq           End of Run 8410: 

  • 212293 12/21/10 09:42  cdaq           Run 8410: Modulation Response Characterization

  • 212292 12/21/10 09:37  cdaq           End of Run 8409: 

  • 212291 12/21/10 09:34  saw            Qtor reproducibility and stability

  • 212290 12/21/10 09:34  cdaq           Run 8409: Modulation Response Characterization

  • 212289 12/21/10 09:30  cdaq           End of Run 8408: 

  • 212288 12/21/10 09:29  cdaq           Run 8408: Modulation Response Characterization

  • 212287 12/21/10 09:19  cdaq           End of Run 8407: 

  • 212286 12/21/10 09:18  cdaq           Run 8407: Modulation Response Characterization

  • 212285 12/21/10 09:17  cdaq           End of Run 8406: 

  • 212284 12/21/10 09:16  cdaq           Run 8406: Modulation Response Characterization

  • 212283 12/21/10 09:15  cdaq           End of Run 8405: 

  • 212282 12/21/10 09:13  cdaq           Run 8405: Modulation Response Characterization

  • 212281 12/21/10 09:12  cdaq           End of Run 8404: 

  • 212280 12/21/10 09:11  cdaq           Run 8404: Modulation Response Characterization

  • 212279 12/21/10 09:10  cdaq           End of Run 8403: 

  • 212278 12/21/10 09:09  cdaq           Run 8403: Modulation Response Characterization

  • 212277 12/21/10 09:05  cdaq           End of Run 8402: 

  • 212276 12/21/10 09:03  cdaq           Run 8402: Modulation Response Characterization

  • 212275 12/21/10 09:02  kamyers        asked MCC to go back to 4x4 raster

  • 212274 12/21/10 08:48  cdaq           End of Run 8401: 

  • 212273 12/21/10 08:44  cdaq           Run 8401: Modulation Response Characterization

  • 212272 12/21/10 08:37  cdaq           End of Run 8400: 

  • 212271 12/21/10 08:33  cdaq           Run 8400: Bmod Response Charaterization

  • 212270 12/21/10 08:23  kamyers        bcm1 and bcm2 changed to 3 for run 8399, then switched back

  • 212269 12/21/10 08:21  cdaq           End of Run 8399: 

  • 212268 12/21/10 08:20  Nuruzzaman     Shift Summary: Owl Shift Summary 12/21/2010

  • 212267 12/21/10 08:19  cdaq           Run 8399: BCM 1,2 gain at 3, 170 uA

  • 212266 12/21/10 08:16  cdaq           End of Run 8398: 

  • 212265 12/21/10 08:06  cdaq           Beam Time Accounting

  • 212264 12/21/10 07:39  seva           bcm yield and asym plots for run 8398

  • 212263 12/21/10 07:26  cdaq           Run 8398: High current commissioning run with QTOR ON, current 170 uA, target OUT (HOME)

  • 212262 12/21/10 07:25  cdaq           End of Run 8397: 

  • 212261 12/21/10 06:37  seva           bcm yield and asym plots for run 8397

  • 212260 12/21/10 06:26  cdaq           Run 8397: High current commissioning run with QTOR ON, current 170 uA, target OUT (HOME)

  • 212259 12/21/10 06:23  Nuruzzaman     VMEC15 rebooted.

  • 212258 12/21/10 06:23  seva           gaines BCM1,2 and BCm5,6 changed for 170uA running

  • 212257 12/21/10 06:18  Nuruzzaman     BCM gain changed back to 2 from 3 for high current commissioning run.

  • 212256 12/21/10 06:14  cdaq           End of Run 8396: 

  • 212255 12/21/10 06:13  cdaq           Run 8396: junk

  • 212254 12/21/10 06:09  Nuruzzaman     IOCSE20 autogain is ON.

  • 212253 12/21/10 06:08  Nuruzzaman     MCC is still working on current lock server. Starting high current commissioning runs.

  • 212252 12/21/10 06:05  seva           screenshot General Tools&HV

  • 212251 12/21/10 05:48  Nuruzzaman     MCC called: Current Lock server is down.They are  orking on that.

  • 212250 12/21/10 05:39  cdaq           End of Run 8395: 

  • 212249 12/21/10 05:24  Nuruzzaman     MCC was doing currents steps automatically, something happned,going to do it manually now. Still in the same run.

  • 212248 12/21/10 04:52  Nuruzzaman     BCM gain changed to 3 and vmec15 rebooted.

  • 212247 12/21/10 04:38  cdaq           Run 8395: Current scan run for BCMs, QTOR ON, target OUT

  • 212246 12/21/10 04:22  Nuruzzaman     Changed bcm gain to 3 from 2 for the current scan.

  • 212245 12/21/10 04:20  cdaq           End of Run 8394: 

  • 212244 12/21/10 03:58  seva            halo montor blank->rebooted g0ioc4

  • 212243 12/21/10 03:36  cdaq           Run 8394: 15 minutes long run for BCMs, QTOR ON, target OUT

  • 212242 12/21/10 03:32  Nuruzzaman     Changed the qwk_bcm1 cut to 70.

  • 212241 12/21/10 03:25  cdaq           End of Run 8393: 

  • 212240 12/21/10 03:17  Adesh          Target: Moved to HOME=Out of Beam

  • 212239 12/21/10 03:17  cdaq           Run 8393: lumi characterization study with qwfeedback, QTOR ON, Target OUT, 0,2.5,5,10 uA

  • 212238 12/21/10 03:13  Nuruzzaman     CODA crashed at the end of the run 8392. Restarted.

  • 212237 12/21/10 03:00  cdaq           Run 8392: lumi characterization study with qwfeedback, QTOR ON, 2% DS Al 5uA

  • 212236 12/21/10 03:00  Adesh          Target: Moved to DS 2% Al target

  • 212235 12/21/10 03:00  Adesh          Target: Moved to DS 2% Al target

  • 212234 12/21/10 02:57  cdaq           End of Run 8391: 

  • 212233 12/21/10 02:55  Nuruzzaman     FFB and FF was OFF during this run, will retake this run again.

  • 212232 12/21/10 02:48  Adesh          Target: Moved to US 1% Al target

  • 212231 12/21/10 02:48  cdaq           Run 8391: lumi characterization study with qwfeedback, QTOR ON, 1% US Al 10uA

  • 212230 12/21/10 02:43  cdaq           End of Run 8390: 

  • 212229 12/21/10 02:36  cdaq           Run 8390: lumi characterization study with qwfeedback, QTOR ON, 2% DS Al 5uA

  • 212228 12/21/10 02:36  Adesh          Target: Moved to DS 2% Al target

  • 212227 12/21/10 02:35  Adesh          Target: Moved to DS 2% Al target

  • 212226 12/21/10 02:32  cdaq           End of Run 8389: 

  • 212225 12/21/10 02:26  cdaq           Run 8389: lumi characterization study with qwfeedback, QTOR ON, Optics-3, 10uA

  • 212224 12/21/10 02:26  Adesh          Target: Moved to Optics -3 target

  • 212223 12/21/10 02:22  cdaq           End of Run 8388: 

  • 212222 12/21/10 02:15  cdaq           Run 8388: lumi characterization study with qwfeedback, QTOR ON, 4% US Al 2.5uA

  • 212221 12/21/10 02:14  Adesh          Target: Moved to US 4% Al target

  • 212220 12/21/10 02:12  cdaq           End of Run 8387: 

  • 212219 12/21/10 02:04  cdaq           Run 8387: lumi characterization study with qwfeedback, QTOR ON, 4% DS Al 2.5uA

  • 212218 12/21/10 02:02  Adesh          Target: Moved to DS 4% Al target

  • 212217 12/21/10 01:58  cdaq           End of Run 8386: 

  • 212216 12/21/10 01:51  cdaq           Run 8386: lumi characterization study with qwfeedback, QTOR ON, 2% US Al 5uA

  • 212215 12/21/10 01:48  Nuruzzaman     QTOR ramped up to its nominal current (8921 A).

  • 212214 12/21/10 01:42  cdaq           End of Run 8385: 

  • 212213 12/21/10 01:36  cdaq           Run 8385: lumi characterization study with qwfeedback, 2% DS Al 5uA

  • 212212 12/21/10 01:36  Adesh          Target: Moved to US 2% Al target

  • 212211 12/21/10 01:32  cdaq           End of Run 8384: 

  • 212210 12/21/10 01:31  Nuruzzaman     Correction: the current is 5 uA not 10 uA

  • 212209 12/21/10 01:25  cdaq           Run 8384: lumi characterization study with qwfeedback, 2% DS Al 10uA

  • 212208 12/21/10 01:25  Adesh          Target: Moved to DS 2% Al target

  • 212207 12/21/10 01:18  cdaq           End of Run 8383: 

  • 212206 12/21/10 01:09  covrig         Target: h-table stepper slipped

  • 212205 12/21/10 01:08  cdaq           Run 8383: lumi characterization study with qwfeedback, 4% DS Al 2.5uA

  • 212204 12/21/10 01:06  Adesh          Target: Moved to DS 4% Al target

  • 212203 12/21/10 01:03  cdaq           End of Run 8382: 

  • 212202 12/21/10 00:56  cdaq           Run 8382: lumi characterization study with qwfeedback, OPTICS-3 10uA

  • 212201 12/21/10 00:55  cdaq           End of Run 8381: 

  • 212200 12/21/10 00:53  cdaq           Run 8381: lumi characterization study with qwfeedback, OPTICS-3 10uA

  • 212199 12/21/10 00:52  Nuruzzaman     Shift started with pendings from swing shift

  • 212198 12/21/10 00:51  Adesh          Target: Moved to Optics-3 target

  • 212197 12/21/10 00:48  cdaq           End of Run 8380: 

  • 212196 12/21/10 00:42  cdaq           Run 8380: lumi characterization study with qwfeedback, 4% US Al 2.5uA

  • 212195 12/21/10 00:38  Adesh          Target: Moved to US 4% Al target

  • 212194 12/21/10 00:33  cdaq           End of Run 8379: 

  • 212193 12/21/10 00:27  cdaq           Beam Time Accounting

  • 212192 12/21/10 00:26  Adesh          Target: Moved to US 1% Al target

  • 212191 12/21/10 00:23  jhlee          Run 8378: this run is not good, because FB is not ON

  • 212190 12/21/10 00:21  seva           bcm yield and asym plots for run 8378

  • 212189 12/21/10 00:18  seva           bcm yield and asym plots for run 8377

  • 212188 12/21/10 00:16  seva           bcm yield and asym plots for run 8377

  • 212187 12/21/10 00:16  seva           bcm yield and asym plots for run 8377

  • 212186 12/21/10 00:15  cdaq           Run 8379: lumi characterization study with qwfeedback, 1% US Al 10uA

  • 212185 12/21/10 00:13  cdaq           End of Run 8378: 

  • 212184 12/21/10 00:06                 Shift summary

    • Monday

  • 212183 12/20/10 23:41  cdaq           Run 8378: lumi characterization study with qwfeedback, 4% US Al 2.5uA

  • 212182 12/20/10 23:36  magee          Target: Target x-motion limit hit on way to 2% ds-Al target

  • 212181 12/20/10 23:36  cdaq           End of Run 8377: 

  • 212180 12/20/10 23:25  rakithab       This is the correct link to PITA slopes results.

  • 212179 12/20/10 23:20  rakithab       Analysis: Half wave plate sign mismatch in the PITA feedback and half wave plate reading

  • 212178 12/20/10 23:09  cdaq           Run 8377: lumi characterization study with qwfeedback, 2% DS Al 5uA

  • 212177 12/20/10 23:08  magee          Target to 2% ds-Al

  • 212176 12/20/10 23:08  cdaq           End of Run 8376: 

  • 212175 12/20/10 23:03  magee          Target amp faul fixed!

  • 212174 12/20/10 23:00  magee          211444

  • 212173 12/20/10 22:46  magee          Target y-motion error

  • 212172 12/20/10 22:43  Ramesh         Snapshot of General tools for shift check-list

  • 212171 12/20/10 22:36  cdaq           Run 8376: lumi characterization study with qwfeedback, 2% Us Al 5uA

  • 212170 12/20/10 22:33  cdaq           End of Run 8375: 

  • 212169 12/20/10 22:32  magee          Trgt: moving to 4% us-Al

  • 212168 12/20/10 22:24  jhlee          Run 8374 : qwfeedback test

  • 212167 12/20/10 22:22  jhlee          Run 8373 :  qwfeedback test

  • 212166 12/20/10 22:20  jhlee          Run 8371 :  qwfeedback test

  • 212165 12/20/10 22:17  cdaq           Run 8375: lumi characterization study with qwfeedback 

  • 212164 12/20/10 22:09  cdaq           End of Run 8374: 

  • 212163 12/20/10 22:05  cdaq           Run 8374: Check qwfeedback with 10uA

  • 212162 12/20/10 22:04  cdaq           End of Run 8373: 

  • 212161 12/20/10 21:58  cdaq           Run 8373: Check qwfeedback with 10uA

  • 212160 12/20/10 21:57  cdaq           End of Run 8372: 

  • 212159 12/20/10 21:56  cdaq           Run 8372: junk

  • 212158 12/20/10 21:54  cdaq           End of Run 8371: 

  • 212157 12/20/10 21:51  Ramesh         bcm1stripchart during bcm calibration (run 8370)

  • 212156 12/20/10 21:50  cdaq           Run 8371: Check Qwfeedback 3x3 raster, 10uA

  • 212155 12/20/10 21:46  cdaq           End of Run 8370: 

  • 212154 12/20/10 21:19  magee          Target: Pictures of target

  • 212153 12/20/10 20:51  magee          Target moved to the Home Out position

  • 212152 12/20/10 20:31  jhlee          Fixed ET crashed 

  • 212151 12/20/10 20:00  cdaq           Run 8370: BCM calibration, QTor off, 4x4 raster

  • 212150 12/20/10 19:52  cdaq           End of Run 8369: 

  • 212149 12/20/10 19:45  cdaq           Run 8369: Lumi characterization Run Qtor Off, 4% DS Al, 2.5uA

  • 212148 12/20/10 19:31  jhlee          ET crashed due to ROC2 (?)

  • 212147 12/20/10 19:27  magee          Target position status

  • 212146 12/20/10 19:26  cdaq           End of Run 8367: 

  • 212145 12/20/10 19:18  cdaq           Run 8367: Lumi characterization Run Qtor Off, Optics3, 10uA

  • 212144 12/20/10 19:15  cdaq           End of Run 8366: 

  • 212143 12/20/10 19:07  cdaq           Run 8366: Lumi characterization Run Qtor Off, 1% US Al, 10uA

  • 212142 12/20/10 19:05  cdaq           End of Run 8365: 

  • 212141 12/20/10 18:57  cdaq           Run 8365: Lumi characterization Run Qtor Off, 4% US Al, 2.5uA

  • 212140 12/20/10 18:55  cdaq           End of Run 8364: 

  • 212139 12/20/10 18:55  jhlee          BPM positions : Run 8364, event range 305000 - 325000

  • 212138 12/20/10 18:50  jhlee          BPM positions : Run 8364, event range 65000 - 85000

  • 212137 12/20/10 18:43  cdaq           Run 8364: Lumi characterization Run Qtor Off, 2% AL, 5uA

  • 212136 12/20/10 18:40  cdaq           End of Run 8363: 

  • 212135 12/20/10 18:32  cdaq           Run 8363: Lumi characterization Run Qtor Off, 2% USAL

  • 212134 12/20/10 18:24  cdaq           End of Run 8362: 

  • 212133 12/20/10 18:12  cdaq           Run 8362: Lumi characterization Run Qtor Off, no target

  • 212132 12/20/10 18:03  Ramesh         Qtor being turned off

  • 212131 12/20/10 18:02  kamyers        Analysis: bpm positions run's 8352 (gains on) and 8357 (gains off)

  • 212130 12/20/10 17:56  cdaq           End of Run 8361: 

  • 212129 12/20/10 17:46  Ramesh         Hall sweeping finished

  • 212128 12/20/10 17:44  jhlee          TS0 returns "cmsg_rc_send" after strange errors

  • 212127 12/20/10 17:37  jhlee          TS returns "strange errors"

  • 212126 12/20/10 17:35  jhlee          Run #8360 : this run is ended due to SYNC mismatch

  • 212125 12/20/10 17:34  jhlee          this run is ended due to sync mismatch

  • 212124 12/20/10 17:27  kamyers        Analysis: bpm diffs for run 8357

  • 212123 12/20/10 17:26  cdaq           Run 8361: long pedestal run for lumi study

  • 212122 12/20/10 17:21  saw            Qtor on

  • 212121 12/20/10 17:15  cdaq           End of Run 8360: 

  • 212120 12/20/10 17:07  kamyers        Analysis: bpm diffs for run 8356

  • 212119 12/20/10 16:58  merz           QTOR PS Status at 1600

  • 212118 12/20/10 16:38  leacock        lumi characterization runplan

  • 212117 12/20/10 16:20  kenyon         Compton water leak fixed.

  • 212116 12/20/10 16:17  kamyers        Day Shift Summary

  • 212115 12/20/10 16:12  cdaq           Beam Time Accounting

  • 212114 12/20/10 16:07  kamyers        Analysis: bpm diffs for run 8354

  • 212113 12/20/10 16:04  kamyers        Analysis: fixed plot for run 8351 bcm1-2 dd width versus current

  • 212112 12/20/10 15:42  cdaq           Run 8360: long pedestal run for lumi study

  • 212111 12/20/10 15:33  cdaq           End of Run 8359: 

  • 212110 12/20/10 15:29  Armstrong      Meta analysis of BCMs from owl shift

  • 212109 12/20/10 15:07  kamyers        Analysis: bcm diffs for run 8352

  • 212108 12/20/10 14:51  benesch        more info on pump

  • 212107 12/20/10 14:50  kamyers        screen shots for shift checklist

  • 212106 12/20/10 14:34  benesch        guess at cold leak rate

  • 212105 12/20/10 14:33  leacock        dslumi2,4,6,8 prerad 2cm lead

  • 212104 12/20/10 14:23  jhlee          RE: started manual qwparity job on cdaql7 for bcm calibration

  • 212103 12/20/10 14:23  cdaq           Run 8359: long pedestal run for lumi study

  • 212102 12/20/10 14:21  cdaq           End of Run 8358: 

  • 212101 12/20/10 14:17  cdaq           Run 8358: pedestal run for lumi study

  • 212100 12/20/10 13:42  mack           BCM1 mixer artifact may be several times larger than that of BCM2

  • 212099 12/20/10 13:33  kamyers        bcm1 downconverter power switched

  • 212098 12/20/10 13:08  Ramesh         For the run 8351 bcm5 and bcm6 are good only above 50 uA

  • 212097 12/20/10 12:58  kamyers        Analysis: BCM properties stability during hour long run 8354

  • 212096 12/20/10 12:02  kamyers        Analysis: Comparing BCM1-2 DD and BCM5-6 DD for run 8351

  • 212095 12/20/10 11:53  kamyers        Analysis: individual bcm5-6 dd plots

  • 212094 12/20/10 11:33  kamyers        Analysis: BCM 5-6 double difference versus current

  • 212093 12/20/10 11:15  cdaq           Beam Time Accounting

  • 212092 12/20/10 11:12  cdaq           Beam Time Accounting

  • 212091 12/20/10 11:10  cdaq           Beam Time Accounting

  • 212090 12/20/10 11:06  cdaq           Beam Time Accounting

  • 212089 12/20/10 11:00  kamyers        started manual qwparity job on cdaql7 for bcm calibration

  • 212088 12/20/10 10:27  kamyers        Analysis: with plot...

  • 212087 12/20/10 10:25  kamyers        Analysis: BCM 1-2 double difference versus current with fit

  • 212086 12/20/10 10:01  AK Opper       Status

  • 212085 12/20/10 10:00  kamyers        Analysis: BCM 1-2 double difference versus current

  • 212084 12/20/10 09:23  kamyers        survey complete, copy of curvey result

  • 212083 12/20/10 08:34  kamyers        survey of hall c starting

  • 212082 12/20/10 08:33  kamyers        Analysis: Plot from PITA scan run 8348

  • 212081 12/20/10 08:08  cdaq           Beam Time Accounting

  • 212080 12/20/10 07:57  rakithab       Analysis: PITA slopes

  • 212079 12/20/10 07:42  Nuruzzaman     Shift Summary: Owl Shift Summary 12/20/2010

  • 212078 12/20/10 07:35  Nuruzzaman     Done with the high current commissioning test. Going to restricted access.

  • 212077 12/20/10 07:30  cdaq           End of Run 8357: 

  • 212076 12/20/10 06:51  seva           bcm yield and asym plots for run 8357

  • 212075 12/20/10 06:31  cdaq           Run 8357: High Current Commissioning run. IOCSE20 auto gain is OFF.

  • 212074 12/20/10 06:30  cdaq           End of Run 8356: 

  • 212073 12/20/10 06:08  seva           bcm yield and asym plots for run 8356

  • 212072 12/20/10 05:48  cdaq           Run 8356: High Current Commissioning run. IOCSE20 auto gain is OFF.

  • 212071 12/20/10 05:48  cdaq           End of Run 8355: 

  • 212070 12/20/10 05:19  seva           bcm yield and asym plots for run 8355

  • 212069 12/20/10 04:49  cdaq           Run 8355: High Current Commissioning run. IOCSE20 auto gain is OFF.

  • 212068 12/20/10 04:47  cdaq           End of Run 8354: 

  • 212067 12/20/10 04:47  Nuruzzaman     IOCSE20 gain turned OFF.

  • 212066 12/20/10 04:04  seva           bcm yield and asym plots for run 8354

  • 212065 12/20/10 04:00  seva           bcm5&6 gain setting for 170uA

  • 212064 12/20/10 03:44  cdaq           Run 8354: High Current Commissioning run

  • 212063 12/20/10 03:42  cdaq           End of Run 8353: 

  • 212062 12/20/10 03:03  seva           bcm yield and asym plots for run 8353

  • 212061 12/20/10 02:43  cdaq           Run 8353: High Current Commissioning run

  • 212060 12/20/10 02:41  cdaq           End of Run 8352: 

  • 212059 12/20/10 02:40  seva           bcm yield and asym plots for run 8352

  • 212058 12/20/10 02:17  seva           bcm yield and asym plots for run 8345

  • 212057 12/20/10 01:57  Nuruzzaman     MCC is having problem to deliver stable 175 uA. They are fine with 170 uA.

  • 212056 12/20/10 01:49  seva           bcm yield and asym plots for run 8344

  • 212055 12/20/10 01:47  cdaq           Run 8352: High Current Commissioning run

  • 212054 12/20/10 01:41  Nuruzzaman     MCC is ramping up to 175 uA

  • 212053 12/20/10 01:40  seva           snapshot: current iocse20  setting

  • 212052 12/20/10 01:32  seva           snapshot General Tools&HV

  • 212051 12/20/10 01:29  Nuruzzaman     Restarted CODA due to event bulider error.

  • 212050 12/20/10 01:22  Nuruzzaman     Run for BCM calibration is done

  • 212049 12/20/10 01:21  cdaq           End of Run 8351: 

  • 212048 12/20/10 00:38  Ramesh         Shift Summary

  • 212047 12/20/10 00:32  Nuruzzaman     Started shift with run for BCM calibration

  • 212046 12/20/10 00:08  cdaq           Beam Time Accounting

    • Sunday

  • 212045 12/19/10 23:49  leacock        switched greenmonster settings (I do not think it caused the problem though)

  • 212044 12/19/10 23:46  cdaq           Run 8351: BCM calibration run (8351)

  • 212043 12/19/10 23:45  cdaq           End of Run 8350: 

  • 212042 12/19/10 23:42  cdaq           Run 8350: BCM calibration run (8351)

  • 212041 12/19/10 23:40  cdaq           End of Run 8349: 

  • 212040 12/19/10 23:37  leacock        pita scan results

  • 212039 12/19/10 23:34  Ramesh         cavity bcm gain setting

  • 212038 12/19/10 23:31  cdaq           Run 8349: charge feedback test

  • 212037 12/19/10 22:46  cdaq           End of Run 8348: 

  • 212036 12/19/10 22:38  cdaq           Run 8348: PITA scan

  • 212035 12/19/10 22:26  cdaq           End of Run 8347: 

  • 212034 12/19/10 22:21  jhoskins       CAEN HV snapshot/GUI snapshot

  • 212033 12/19/10 22:20  cdaq           Run 8347: pedestal run after lumi study (required)

  • 212032 12/19/10 22:18  leacock        Target: targets in beam  late entry

  • 212031 12/19/10 22:11  cdaq           Run 8346: 4% DS AL, 3mm x 3mm raster, 2.5 uA beam

  • 212030 12/19/10 22:09  jhoskins       FFT difference 8028 -- fixed --

  • 212029 12/19/10 22:07  cdaq           End of Run 8345: 

  • 212028 12/19/10 22:03  cdaq           Run 8345: Optics target 3, 3mm x 3mm raster, 10 uA beam

  • 212027 12/19/10 22:03  jhoskins       FFT difference analysis of runs 8042

  • 212026 12/19/10 22:00  jhoskins       FFT difference analysis of runs 8028-8042[fixed?]

  • 212025 12/19/10 21:59  Ramesh         Run 8339 had cavity bcm gain settings wrong

  • 212024 12/19/10 21:57  cdaq           End of Run 8344: 

  • 212023 12/19/10 21:57  jhoskins       FFT difference analysis of runs 8028-8042

  • 212022 12/19/10 21:53  cdaq           Run 8344: 1% US Al, 3mm x 3mm raster, 10 uA beam

  • 212021 12/19/10 21:50  kamyers        bcm yield and asym plots for run 8339, 100 uA

  • 212020 12/19/10 21:50  cdaq           End of Run 8343: 

  • 212019 12/19/10 21:45  Ramesh         bcm asym double diff from run 8340

  • 212018 12/19/10 21:43  cdaq           Run 8343: 4% US Al, 3mm x 3mm raster, 2.5 uA beam

  • 212017 12/19/10 21:35  cdaq           End of Run 8342: 

  • 212016 12/19/10 21:32  cdaq           Run 8342: 2% DS Al, 3mm x 3mm raster, 5 uA beam

  • 212015 12/19/10 21:27  cdaq           End of Run 8341: 

  • 212014 12/19/10 21:24  cdaq           Run 8341: 2% US Al, 3mm x 3mm raster, 5 uA beam

  • 212013 12/19/10 21:16  leacock        halo 3,4 all lumi hv on

  • 212012 12/19/10 21:15  cdaq           End of Run 8340: 

  • 212011 12/19/10 21:10  cdaq           Run 8340: Empty target, 4mm x 4mm raster, bcm5,6 gain 8 each, 100 uA beam

  • 212010 12/19/10 21:09  cdaq           End of Run 8339: 

  • 212009 12/19/10 21:02  cdaq           Run 8339: Empty target, 4mm x 4mm raster, 100 uA beam

  • 212008 12/19/10 20:33  cdaq           End of Run 8338: 

  • 212007 12/19/10 20:29  cdaq           Beam Time Accounting

  • 212006 12/19/10 20:23  cdaq           Run 8338: pedestal run of the shift

  • 212005 12/19/10 20:11  Ramesh         Target pressure as a function of N2 consumption

  • 212004 12/19/10 20:05  leacock        adjusted dslumi depths to be symmetric

  • 212003 12/19/10 20:03  Ramesh         All valves open, vacuum good

  • 212002 12/19/10 20:02  AK Opper       Beam: FSD pressure differential on cryo loop

  • 212001 12/19/10 20:01  jhoskins       Water leak coming from dipole in Compton Chicane

  • 212000 12/19/10 19:40  Ramesh         Going to go to beam permit

  • 211999 12/19/10 19:18  mack           results from MD focal plane dosimetry - variation of background with radius is only a factor of 3

  • 211998 12/19/10 19:04  jhoskins       Scattering Chamber gauge

  • 211997 12/19/10 17:52  jhoskins       Streeing magnets used for position at 3h09b

  • 211996 12/19/10 15:25  AK Opper       Target: Monitoring and tending the LN2 trap

  • 211995 12/19/10 14:23  tforest        R1 Detector +2 Scints installed behind main detector 8

    • Saturday

  • 211994 12/18/10 19:28  leacock        wrong label

  • 211993 12/18/10 19:27                 labels reversed

  • 211992 12/18/10 16:43  brads          /home/cdaq is 97% full -- please clean up your directories

  • 211991 12/18/10 12:33  AK Opper       Recovery plan and SHIFTS

  • 211989 12/18/10 11:08  AK Opper       Shift Summary: Status and plans

  • 211988 12/18/10 01:51  Jiawei         Summary of bcm study

  • 211987 12/18/10 01:29  Jiawei         summary of BCM1,2 studies with RF signal generator

  • 211986 12/18/10 00:15  mack           preliminary summary of BCM1,2 studies with RF signal generator

  • 211985 12/18/10 00:03  smithg         Target: Plan of attack for Monday

    • Friday

  • 211984 12/17/10 23:59  donjones       Compton: turned off laser

  • 211983 12/17/10 23:44  smithg         Target: Summary of target warmup, inerting the loop with helium, and venting the scattering chamber

  • 211982 12/17/10 19:04  Mack, Jiawei   bcm test, run 8337, -6dbm, DC blocks installed, LFPs installed, generator moved to downstairs

  • 211981 12/17/10 18:46  Mack, Jiawei   bcm test, run 8336, -3dbm, DC blocks installed, LFPs installed, generator moved to downstairs

  • 211980 12/17/10 18:44  cdaq           End of Run 8337: 

  • 211979 12/17/10 18:42  cdaq           Run 8337: BCM Noise Study: -6 dbm, signal generator downstairs, DC blocks installed, LFPs installed

  • 211978 12/17/10 18:36  Mack, Jiawei   bcm test, run 8335, +3dbm, DC blocks installed, LFPs installed, generator moved to downstairs

  • 211977 12/17/10 18:33  leacock        zoomed GEM enclosure ION chamber during excursion

  • 211976 12/17/10 18:31  cdaq           End of Run 8336: 

  • 211975 12/17/10 18:30  cdaq           Run 8336: BCM Noise Study: -3 dbm, signal generator downstairs, DC blocks installed, LFPs installed

  • 211974 12/17/10 18:15  cdaq           End of Run 8335: 

  • 211973 12/17/10 18:12  cdaq           Run 8335: BCM Noise Study: +3 dbm, signal generator downstairs, DC blocks installed, LFPs installed

  • 211972 12/17/10 18:08  Mack, Jiawei   bcm test, run 8334, 0dbm, DC blocks installed, LFPs installed, generator moved to downstairs

  • 211971 12/17/10 18:04  Jiawei         It should be run 8333, 0dbm, DC blocks installed, generator moved to downstairs, LFPs removed

  • 211970 12/17/10 18:01  jwmartin       scanner ethernet magically working again

  • 211969 12/17/10 18:01  jwmartin       scanner ethernet magically working again

  • 211968 12/17/10 18:00  Mack, Jiawei   bcm test, run 8332, 0dbm, DC blocks installed, generator moved to downstairs, LFPs removed

  • 211967 12/17/10 17:52  cdaq           End of Run 8334: 

  • 211966 12/17/10 17:50  cdaq           Run 8334: BCM Noise Study: 0 dbm, signal generator is downstairs near moller, DC blocks installed, LFPs reinstalled

  • 211965 12/17/10 17:45  cdaq           End of Run 8333: 

  • 211964 12/17/10 17:43  cdaq           Run 8333: BCM Noise Study: 0 dbm, signal generator is downstairs near moller, DC blocks installed, LFPs removed

  • 211963 12/17/10 17:33  Mack, Jiawei   bcm test, run 8332, 0dbm, DC blocks removed, generator moved to downstairs (near moller)

  • 211962 12/17/10 17:27  leacock        A look at the archive of the ion chambers

  • 211961 12/17/10 17:22  smithg         Target: picture of reduced ice in target chamber

  • 211960 12/17/10 17:18  cdaq           End of Run 8332: 

  • 211959 12/17/10 17:15  cdaq           Run 8332: BCM Noise Study: 0 dbm, signal generator is downstairs near moller

  • 211958 12/17/10 17:14  Mack, Jiawei   bcm test, run 8331, 0dbm, DC blocks installed, generator moved to downstairs (near moller)

  • 211957 12/17/10 16:59  cdaq           End of Run 8331: 

  • 211956 12/17/10 16:57  cdaq           Run 8331: BCM Noise Study: 0 dbm, signal generator is downstairs near moller, DC blocks installed

  • 211955 12/17/10 16:41  Mack, Jiawei   bcm test, run 8330, 0dbm, DC blocks installed

  • 211954 12/17/10 16:28  Mack, Jiawei   Repeat the bcm test done last night

  • 211953 12/17/10 16:25  cdaq           End of Run 8330: 

  • 211952 12/17/10 16:21  cdaq           Run 8330: BCM Noise Study: 0 dbm, signal generator split to both downconverter, DC blocks installed

  • 211951 12/17/10 16:16  jwmartin       scanner in motion tests

  • 211950 12/17/10 16:11  cdaq           End of Run 8329: 

  • 211949 12/17/10 16:08  cdaq           Run 8329: BCM Noise Study: 0 dbm, signal generator split to both downconverter

  • 211948 12/17/10 15:54  cdaq           End of Run 8328: 

  • 211947 12/17/10 15:52  cdaq           Run 8328: BCM Noise Study: 0 dbm, signal generator split to both downconverter

  • 211946 12/17/10 15:47  mack           machine protection

  • 211945 12/17/10 14:48  AK Opper       FSD Mask

  • 211944 12/17/10 14:41  Pitt           Some comments about the beam steering incident

  • 211943 12/17/10 13:50  smithg         Target: Our LH2 cell has become a giant snowcone

  • 211942 12/17/10 13:38  smithg         location on beamline where hole is

  • 211941 12/17/10 13:33  rakithab       Analysis: devel/Prompt summary script Updated to revision 2342

  • 211940 12/17/10 13:15  allison        BCM 5&6 Cutoff

  • 211939 12/17/10 13:12  Jiawei         Target: Target was out of beam when the beam hit the beam pipe.

  • 211938 12/17/10 12:44  magee          HV turned off

  • 211937 12/17/10 12:23  magee          Day shift screenshots

  • 211936 12/17/10 12:01  AK Opper       Plan to recover from beam burnthrough

  • 211935 12/17/10 11:13  Jiawei         Target: Start to warm up target slowly now

  • 211934 12/17/10 09:54  Jiawei         Target: 4K Flow Rate took another crap and plummeted to 0 g/s again

  • 211932 12/17/10 09:48  AK Opper       Apparent Beam Burnthrough

  • 211931 12/17/10 09:40  gaskell        Warming up Moller

  • 211930 12/17/10 09:16  magee          Table heater power cycled

  • 211929 12/17/10 09:16  cdaq           Beam Time Accounting

  • 211928 12/17/10 08:27  magee          Hall in restricted access

  • 211927 12/17/10 07:07  L.Lee          Target: Note to Day-shift Target Operator

  • 211926 12/17/10 06:52  L.Lee          Target: QWT_tableA  alarm "LOW" setpoint lowered further from 277 K -> 276 K

  • 211925 12/17/10 05:22  cdaq           End of Run 8314: 

  • 211924 12/17/10 05:10  L.Lee          Target: 4K JT valve opened by 0.6%

  • 211923 12/17/10 05:00  L.Lee          Target: 4K Flow Rate took another crap and plummeted to 0 g/s again

  • 211922 12/17/10 03:35  L.Lee          Target: QWT_tableA temps has also been dropping - temporarily change alarm "LOW" setpt 278 K -> 277 K

  • 211921 12/17/10 03:00  L.Lee          Target: Moving to Empty-Target position has also conveniently warmed up Horiz-motion brake slightly

  • 211920 12/17/10 02:57  L.Lee          Target: QWT_phytronB "LOW" alarm limit temporarily changed from 277 K to 276 K

  • 211919 12/17/10 02:48  L.Lee          Target: QWT_phytronB (Horizontal Motion Brake Temperature) dropping below Alarm limits

  • 211918 12/17/10 02:34  L.Lee          Target: Target moved from HOME=Out-of-Beam to US-Empty-Frame position

  • 211917 12/17/10 01:55  L.Lee          Target: 4K Flow Rate took a crap and plummeted to 0 g/s

  • 211916 12/17/10 01:22  R. Michaels    test1 of two online codes

  • 211915 12/17/10 00:47  cdaq           Run 8314: DAQ software test

  • 211914 12/17/10 00:40  L.Lee          Target: Screenshot of target at beginning of owl shift

  • 211913 12/17/10 00:39  mack           delightfully boring table of BCM1,2 results with RF signal generator input to both downconverters 

  • 211912 12/17/10 00:03  cdaq           Beam Time Accounting

    • Thursday

  • 211911 12/16/10 23:59  jwmartin       Shift Summary: Swing Shift Summary

  • 211910 12/16/10 23:34  jwmartin       survey of pipe downstream of VBV3H09A and upstream of target, and into R2

  • 211909 12/16/10 23:15  Ramesh         general tools snapshot

  • 211908 12/16/10 22:35  jwmartin       update on vacuum issues

  • 211907 12/16/10 22:15  Ramesh         bcm analysis of run 8310

  • 211906 12/16/10 21:27  leacock        scattering chamber pressure  since 16 October

  • 211905 12/16/10 19:59  Jiawei         BCM analysis of run 8313

  • 211904 12/16/10 19:54  Jiawei         BCM analysis of run 8312

  • 211903 12/16/10 19:49  cdaq           End of Run 8313: 

  • 211902 12/16/10 19:48  Jiawei         BCM analysis of run 8311

  • 211901 12/16/10 19:42  Jiawei         BCM analysis of run 8309

  • 211900 12/16/10 19:41  cdaq           Run 8313: BCM Noise Study: bcm1/2 test at 0 dB, LPF removed from both

  • 211899 12/16/10 19:39  cdaq           End of Run 8312: 

  • 211898 12/16/10 19:36  Mack/Jiawei    BCM work updated

  • 211897 12/16/10 19:34  cdaq           Run 8312: BCM Noise Study: bcm1/2 test at 0 dB, bcm2 LPF removed

  • 211896 12/16/10 19:32  cdaq           End of Run 8311: 

  • 211895 12/16/10 19:26  cdaq           Run 8311: BCM Noise Study: bcm1/2 test at 0 dB, bcm1 LPF removed

  • 211894 12/16/10 19:23  cdaq           End of Run 8310: 

  • 211893 12/16/10 19:20  cdaq           Run 8310: BCM Noise Study: bcm1/2 test at 0 dB

  • 211892 12/16/10 19:11  jwmartin       Target: reduced level for low alarm on QWT_tableA

  • 211891 12/16/10 19:10  cdaq           End of Run 8309: 

  • 211890 12/16/10 19:07  cdaq           Run 8309: BCM Noise Study: bcm1/2 test at 0 dBm

  • 211889 12/16/10 18:37  jwmartin       Target: low alarm on QWT_tableA

  • 211888 12/16/10 18:00  leacock        Target: target scattering chamber vacuum after excursion

  • 211887 12/16/10 17:53  cdaq           End of Run 8308: 

  • 211886 12/16/10 17:53  leacock        Target: screenshot 

  • 211885 12/16/10 17:52  cdaq           Run 8308: DAQ test

  • 211884 12/16/10 17:51  cdaq           End of Run 8307: 

  • 211883 12/16/10 17:48  cdaq           Run 8307: DAQ test

  • 211882 12/16/10 17:26  jwmartin       Beam: beamline vacuum woes

  • 211881 12/16/10 16:26  cdaq           End of Run 8306: 

  • 211880 12/16/10 16:21  cdaq           Run 8306: DAQ test

  • 211879 12/16/10 16:20  cdaq           Beam Time Accounting

  • 211878 12/16/10 16:19  cdaq           End of Run 8305: 

  • 211877 12/16/10 16:18  cdaq           Run 8305: DAQ test

  • 211876 12/16/10 16:16  cdaq           End of Run 8304: 

  • 211875 12/16/10 16:15  cdaq           Run 8304: DAQ test

  • 211874 12/16/10 15:52  jhoskins       Shift Summary

  • 211873 12/16/10 15:38  jwmartin       scanner successfully moves around

  • 211872 12/16/10 15:37  tforest        Shift screen shots

  • 211871 12/16/10 15:34  jhoskins       Seems to be another vacuum problem.

  • 211870 12/16/10 15:26  jhoskins       Going to Beam Permit

  • 211869 12/16/10 15:23  tforest        R1 detector Urim signal scope picture

  • 211868 12/16/10 15:17  cdaq           Beam Time Accounting

  • 211867 12/16/10 15:01  tforest        R1 detector Urim

  • 211866 12/16/10 14:50  buddhini       Analysis: BPM effective charge double difference variation across 3c line in run 8231 - 8235.

  • 211864 12/16/10 14:35  AK Opper       Beam: VBV3H09A set open -- late entry

  • 211863 12/16/10 13:24  leacock        lumi neutral axis study

  • 211862 12/16/10 13:16  cdaq           End of Run 8303: 

  • 211861 12/16/10 13:09  cdaq           Run 8303: DAQ test

  • 211860 12/16/10 13:04  cdaq           End of Run 8302: 

  • 211859 12/16/10 13:03  cdaq           Run 8302: DAQ test

  • 211858 12/16/10 12:49  Jiawei         Target: Late entry: the target was very unstable

  • 211857 12/16/10 12:41  cdaq           End of Run 8301: 

  • 211856 12/16/10 12:39  cdaq           Run 8301: DAQ test

  • 211855 12/16/10 12:38  cdaq           End of Run 8300: 

  • 211854 12/16/10 12:35  cdaq           Run 8300: DAQ test

  • 211853 12/16/10 12:27  cdaq           End of Run 8299: 

  • 211852 12/16/10 12:26  cdaq           Run 8299: DAQ test

  • 211851 12/16/10 12:25  cdaq           End of Run 8298: 

  • 211850 12/16/10 12:24  cdaq           Run 8298: DAQ test

  • 211849 12/16/10 12:23  cdaq           End of Run 8297: 

  • 211848 12/16/10 12:22  cdaq           Run 8297: DAQ test

  • 211847 12/16/10 12:21  cdaq           End of Run 8296: 

  • 211846 12/16/10 12:21  cdaq           Run 8296: DAQ test

  • 211845 12/16/10 12:20  beaufait       qtor

  • 211844 12/16/10 12:18  cdaq           End of Run 8295: 

  • 211843 12/16/10 12:17  cdaq           Run 8295: DAQ test

  • 211842 12/16/10 11:34  cdaq           Moller End of Run 676: 

  • 211841 12/16/10 11:32  cdaq           Moller Run 676: lDAQ check

  • 211840 12/16/10 11:30  Jiawei         Target: 4K flow is unstable

  • 211839 12/16/10 11:22  kamyers        individual asym distributions for 8293 noise test

  • 211838 12/16/10 10:11  donjones       Compton: laser interlock tripped 

  • 211837 12/16/10 09:41  gaskell        Diffuser chiller

  • 211836 12/16/10 09:30  jhoskins       BPM yield difference plots

  • 211835 12/16/10 09:28  jhoskins       BPM yield difference plots

  • 211834 12/16/10 09:07                 Cryo people is adjusting some 4K flow valve on their end

  • 211833 12/16/10 09:03  Jiawei         Target: Cryo people is adjusting some 4K flow valve on their end

  • 211832 12/16/10 07:58  L.Lee          Target: Screenshot of target at end of owl shift

  • 211831 12/16/10 07:55  seva           vacuum experts and their roughing vacuum pump entered hall

  • 211830 12/16/10 07:28  seva           vacuum expert at JLab , getting ready to come to hall

  • 211829 12/16/10 04:39                 owl shift summary

  • 211828 12/16/10 04:35  leacock        bad vacuum final decision

  • 211827 12/16/10 04:25  seva           end of this shift

  • 211826 12/16/10 04:07  seva           turned off HV on lumis and halos; target out of beam

  • 211825 12/16/10 03:44  mack/kamyers   summary of DC block studies with RF signal generator

  • 211824 12/16/10 03:40  seva           as it stands vacuum epert will scome at 7am

  • 211823 12/16/10 03:17  kamyers        reset 3h07 ion pump, vacuum better 3h08, but still bad at 3h09

  • 211822 12/16/10 03:10  kamyers        junk results from PITA scan?

  • 211821 12/16/10 02:15  L.Lee          Target: Solid target temperatures rise and SC_Vacuum jump correlated with vacuum problem

  • 211820 12/16/10 02:14  seva           Hall C vacuum

  • 211819 12/16/10 01:56  seva           screenshot of ELOG regarding the mishap

  • 211818 12/16/10 01:34  kamyers        BPM lock settings before vacuum loss

  • 211817 12/16/10 01:25  cdaq           End of Run 8294: 

  • 211816 12/16/10 01:24  kamyers        unplugged the low pass filter cables from BCM1 and BCM2

  • 211815 12/16/10 01:21  cdaq           Run 8294: beam off test

  • 211814 12/16/10 01:16  kamyers        more plots for vacuum loss/beam properties at time

  • 211813 12/16/10 01:12  L.Lee          Target: Solid target temperatures rise correlated with vacuum problem

  • 211812 12/16/10 00:59  seva           MCC called an expert in to check the vacuum problem

  • 211811 12/16/10 00:34  kamyers        loss of vacuum between 3h07 and 3h09

  • 211810 12/16/10 00:32  kamyers        BCM plots for run 8293 - DC blocks off again, 45 uA

  • 211809 12/16/10 00:19  kamyers        run 8291: 45 uA bcm noise baseline

  • 211808 12/16/10 00:18  cdaq           End of Run 8293: 

  • 211807 12/16/10 00:16  cdaq           Run 8293: bcm noise test

  • 211806 12/16/10 00:16  seva           continuing lumi plan: target out of bewam,45uA, 2x2 raster

  • 211805 12/16/10 00:15  seva           turned HV on lumis and halos

  • 211804 12/16/10 00:09  L.Lee          Target: Screenshot of target at beginning of owl shift

  • 211803 12/16/10 00:02  cdaq           Beam Time Accounting

  • 211802 12/16/10 00:00  cdaq           End of Run 8292:

    • Wednesday

  • 211801 12/15/10 23:58  jwmartin       Shift Summary: Swing Shift Summary

  • 211800 12/15/10 23:54  cdaq           Run 8292: PITA Scan at 45 uA

  • 211799 12/15/10 23:50  cdaq           End of Run 8291: 

  • 211798 12/15/10 23:48  cdaq           Run 8291: BCM Noise Study: 45 uA baseline test

  • 211797 12/15/10 23:41  jwmartin       exit window chiller and diffuser

  • 211796 12/15/10 22:26  kamyers        Target: another brief excursion in the 4K flow - self recovered quickly

  • 211795 12/15/10 22:20  kamyers        shift checklist snapshots

  • 211794 12/15/10 22:18  jwmartin       exit window waterflow and diffuser FSD faults

  • 211793 12/15/10 22:02  paschke        correction: I mean to say double difference width is what we want to use for this

  • 211792 12/15/10 21:51  paschke        Double difference down the 3c line

  • 211791 12/15/10 21:31  kamyers        BCM Study: run 8290 - rf gen upstairs, BCM17 ref oscillator power off

  • 211790 12/15/10 21:24  cdaq           End of Run 8290: 

  • 211789 12/15/10 21:22  cdaq           Run 8290: BCM Noise Study: RF -3 dBm signal generator upstairs

  • 211788 12/15/10 21:13  kamyers        BCM Study: run 8289 with RF gen upstairs - 2nd try

  • 211787 12/15/10 21:02  cdaq           End of Run 8289: 

  • 211786 12/15/10 21:01  kamyers        BCM Study: run 8288 with RF signal gen upstairs

  • 211785 12/15/10 21:01  cdaq           Run 8289: BCM Noise Study: RF -3 dBm signal generator upstairs

  • 211784 12/15/10 20:43  buddhini       Analysis: BPM effective charge asymmetry variation across 3C line for runs 8231 - 8235

  • 211783 12/15/10 20:42  cdaq           End of Run 8288: 

  • 211782 12/15/10 20:34  cdaq           Run 8288: BCM Noise Study: RF +0 dBm signal generator upstairs

  • 211781 12/15/10 20:31  leacock        region 2 thresholds, low voltage, and fans off -- epics scaler channels

  • 211780 12/15/10 20:25  kamyers        BCM Study: +0dBm, DC blocks installed, w/o and w/ poor-man's low pass filter

  • 211779 12/15/10 20:14  cdaq           End of Run 8287: 

  • 211778 12/15/10 20:11  cdaq           Run 8287: BCM Noise Study: RF +0 dBm, DC blocks installed

  • 211777 12/15/10 20:08  tforest        R1 detector installed near R3 with 2 Scintillator paddles

  • 211776 12/15/10 19:26  leacock        Target: 4K inlet flow dropped to zero -- recovered

  • 211775 12/15/10 19:19  gaskell        BCM17 saturates above 145-150 uA

  • 211774 12/15/10 19:17  cdaq           End of Run 8286: 

  • 211773 12/15/10 19:12  kamyers        run 8285 junk

  • 211772 12/15/10 19:12  cdaq           Run 8286: BCM Noise Study: RF +0 dBm, DC blocks installed

  • 211771 12/15/10 19:11  cdaq           End of Run 8285: 

  • 211770 12/15/10 19:09  cdaq           Run 8285: BCM Noise Study: RF +0 dBm, DC blocks installed

  • 211769 12/15/10 18:35  cdaq           End of Run 8284: 

  • 211768 12/15/10 18:29  kamyers        Analysis: BCM asym and double difference widths from run 8238 - current scan

  • 211767 12/15/10 18:26  cdaq           Run 8284: BCM Noise Study: RF +3 dBm, DC blocks installed

  • 211766 12/15/10 18:23  kamyers        BCM Study: BCM1-2 DD with DC blocks installed again

  • 211765 12/15/10 18:21  kamyers        FFT's of qwk_bcm1, w/ and w/o DC blocks

  • 211764 12/15/10 18:17  cdaq           End of Run 8283: 

  • 211763 12/15/10 18:13  cdaq           Run 8283: BCM Noise Study: RF +3 dBm, DC blocks installed

  • 211762 12/15/10 18:06  kamyers        BCM Study: yields and dds for baseline's before/after

  • 211761 12/15/10 17:53  cdaq           End of Run 8282: 

  • 211760 12/15/10 17:51  cdaq           Run 8282: BCM Noise Study: RF +3 dBm, baseline

  • 211759 12/15/10 17:49  kamyers        BCM Study: Plots for BCM1/2 with DC blocks

  • 211758 12/15/10 17:45  jwmartin       scanner control box and status

  • 211757 12/15/10 17:30  cdaq           End of Run 8281: 

  • 211756 12/15/10 17:29  cdaq           Run 8281: BCM Noise Study: RF +3 dBm, DC blocks with Cu tape shorting outer shield

  • 211755 12/15/10 17:21  cdaq           End of Run 8280: 

  • 211754 12/15/10 17:17  cdaq           Run 8280: BCM Noise Study: RF +3 dBm, DC blocks installed

  • 211753 12/15/10 17:16  cdaq           Beam Time Accounting

  • 211752 12/15/10 17:11  cdaq           End of Run 8279: 

  • 211751 12/15/10 17:09  cdaq           Run 8279: BCM Noise Study: RF +3 dBm, baseline

  • 211750 12/15/10 16:59  cdaq           Run 8278: Tracking DAQ test

  • 211749 12/15/10 16:43  cdaq           End of Run 8277: 

  • 211748 12/15/10 16:41  cdaq           Run 8277: Tracking DAQ test

  • 211747 12/15/10 16:38  kamyers        Analysis: BCM widths for BCM5/6 V-F connected/disconnected

  • 211746 12/15/10 16:35  cdaq           Run 8276: Tracking DAQ test

  • 211745 12/15/10 16:18  kamyers        Analysis: array of double difference widths for run 8235 (including bcm17) - 150 uA

  • 211744 12/15/10 16:05  leacock        Target: screenshot at beginning of shift

  • 211743 12/15/10 15:57  magee          Day shift summary

  • 211742 12/15/10 15:46  kamyers        Analysis: Summary and BCM plots for BCM17-BCM2 switch runs

  • 211741 12/15/10 15:41  cornejo        Target: Target GUI and strip charts screenshots

  • 211740 12/15/10 15:29  beaufait       qtor

  • 211739 12/15/10 14:41  kamyers        Analysis: Additional BCM plots for run 8227 - 150 uA baseline

  • 211738 12/15/10 14:36  cornejo        Target: 4K Flow Rate dropped to zero

  • 211737 12/15/10 14:20  kenyon         Changed oil, problem up stream of turbo

  • 211736 12/15/10 14:17  kenyon         Added 2 gallons of water to exit window chiller

  • 211735 12/15/10 14:07  cdaq           End of Run 8275: 

  • 211734 12/15/10 14:05  cdaq           Run 8275: Tracking DAQ test

  • 211733 12/15/10 14:03  tforest        Gen tools and HV screen shot

  • 211732 12/15/10 13:55  magee          Raster tripped, now back on 4x4

  • 211731 12/15/10 13:48  cdaq           End of Run 8274: 

  • 211730 12/15/10 13:47  cdaq           Run 8274: TEST

  • 211729 12/15/10 13:44  cdaq           End of Run 8273: 

  • 211728 12/15/10 13:44  cdaq           Run 8273: Tracking DAQ Study

  • 211727 12/15/10 12:45  cdaq           End of Run 8272: 

  • 211726 12/15/10 12:44  cdaq           Run 8272: Tracking DAQ Study

  • 211725 12/15/10 12:36  cdaq           End of Run 8271: 

  • 211724 12/15/10 12:35  cdaq           Run 8271: Tracking DAQ Study

  • 211723 12/15/10 12:13  cdaq           End of Run 8270: 

  • 211722 12/15/10 12:12  cdaq           Run 8270: Tracking DAQ Study

  • 211721 12/15/10 12:10  cdaq           End of Run 8269: 

  • 211720 12/15/10 12:10  cdaq           Run 8269: Tracking DAQ Study

  • 211719 12/15/10 11:56  cornejo        Target: Target parked

  • 211718 12/15/10 11:52  cdaq           End of Run 8268: 

  • 211717 12/15/10 11:51  cdaq           Run 8268: Tracking DAQ Study

  • 211716 12/15/10 11:43  cdaq           Run 8267: Tracking DAQ Study

  • 211715 12/15/10 11:40  cdaq           End of Run 8266: 

  • 211714 12/15/10 11:39  cdaq           Run 8266: Tracking DAQ : Region 2 Study

  • 211713 12/15/10 11:16  cdaq           End of Run 8265: 

  • 211712 12/15/10 11:07  paschke        Correction, now looking at BCM remap in run 8233

  • 211711 12/15/10 11:06  cdaq           Run 8265: Tracking DAQ : Region 2 Study

  • 211710 12/15/10 11:05  cdaq           End of Run 8264: 

  • 211709 12/15/10 11:04  cdaq           Run 8264: Tracking DAQ : Region 2 Study

  • 211708 12/15/10 11:03  cdaq           End of Run 8263: 

  • 211707 12/15/10 11:01  cdaq           Run 8263: Tracking DAQ : Region 2 Study

  • 211706 12/15/10 10:57  cornejo and    Target: Start to park the target partially

  • 211705 12/15/10 10:57  cdaq           End of Run 8262: 

  • 211704 12/15/10 10:56  mack           BPM charge asymmetries changing down the beamine? 

  • 211703 12/15/10 10:55  cdaq           Run 8262: Tracking DAQ : Region 2 Study

  • 211702 12/15/10 10:52  cdaq           End of Run 8261: 

  • 211701 12/15/10 10:51  cdaq           Run 8261: Tracking DAQ : Region 2 Study

  • 211700 12/15/10 10:44  cdaq           Run 8260: Tracking DAQ : Region 2 Study

  • 211699 12/15/10 10:35  cdaq           End of Run 8259: 

  • 211698 12/15/10 10:34  cdaq           Run 8259: Tracking DAQ : Region 2 Study

  • 211697 12/15/10 10:32  jhlee          renice it with 19 

  • 211696 12/15/10 10:26  cdaq           End of Run 8258: 

  • 211695 12/15/10 10:25  cdaq           Run 8258: Tracking DAQ : Region 2 Study

  • 211694 12/15/10 10:20  kenyon         Possible causes for worsening DS vacuum

  • 211693 12/15/10 10:16  cdaq           End of Run 8257: 

  • 211692 12/15/10 10:15  cdaq           Run 8257: Tracking DAQ : Region 2 Study

  • 211691 12/15/10 10:09  jhlee          ROOT session on cdaql4

  • 211690 12/15/10 10:06  paschke        BCM 2 electronics with BCM17 - Run 8235

  • 211689 12/15/10 10:05  magee          region 2 detectors to go on.

  • 211688 12/15/10 09:16  covrig         Target: vacuum getting worse in the DS beamline

  • 211687 12/15/10 09:03  jhlee          RADCON Survey pic

  • 211686 12/15/10 08:57  magee          Hall in Restricted Access

  • 211685 12/15/10 08:06  cdaq           Beam Time Accounting

  • 211684 12/15/10 08:04  seva           and plots

  • 211683 12/15/10 08:02  seva           Owl shif summary

  • 211682 12/15/10 07:58  seva           summary (and some analysis) of lumi BPM scan: Part 2

  • 211681 12/15/10 07:58  L.Lee          Target: Target moved from Hydrogen-Cell to HOME=Out-of-Beam position

  • 211680 12/15/10 07:57  Fatiha         Beam: BCM1 vs. BCM2 run(8255

  • 211679 12/15/10 07:54  Fatiha         Beam: BCM1 vs. BCM2 run(825

  • 211678 12/15/10 07:52  Fatiha         Beam: BCM1 vs. BCM2 run(8253

  • 211677 12/15/10 07:50  Fatiha         Beam: BCM1 vs. BCM2 run(8252)

  • 211676 12/15/10 07:48  Fatiha         Beam: BCM1 vs. BCM2 run(8251)

  • 211675 12/15/10 07:45  Fatiha         Beam: BCM1 vs. BCM2 run(8250)

  • 211674 12/15/10 07:40  Fatiha         Beam: BCM1 vs. BCM2 run(8249)

  • 211673 12/15/10 07:39  seva           asked for restricted

  • 211672 12/15/10 07:38  seva           MCC was not able to do harps scans

  • 211671 12/15/10 07:38  L.Lee          Target: Screenshot of target at end of owl shift

  • 211670 12/15/10 07:36  Fatiha         Beam: BCM1 vs. BCM2 run(8248)

  • 211669 12/15/10 07:33  Fatiha         Beam: BCM1 vs. BCM2 run(8247)

  • 211668 12/15/10 07:30  Fatiha         Beam: BMC1 vs. BCM2 run(8246)

  • 211667 12/15/10 07:24  Fatiha         run 8241 to 8246 are large charge asymmetry  tests

  • 211666 12/15/10 07:20  Fatiha         Beam: BCM1 vs. BCM2 run(8240)

  • 211665 12/15/10 07:14  Fatiha         Beam: BCM1 vs. BCM2 run(8238)

  • 211664 12/15/10 07:12  Fatiha         Beam: BCM1 vs. BCM2 run(8237)

  • 211663 12/15/10 07:09  Fatiha         Beam: BCM1 vs. BCM2 run(8236)

  • 211662 12/15/10 07:06  Fatiha         Beam: BCM1 vs. BCM2 run(8235)

  • 211661 12/15/10 07:03  Fatiha         Beam: BCM1 vs. BCM2 run(8234)

  • 211660 12/15/10 07:01  Fatiha         Beam: BCM1 vs. BCM2 run(8233)

  • 211659 12/15/10 06:57  Fatiha         Beam: BCM1 vs. BCM2 run(22

  • 211658 12/15/10 06:52  Fatiha         Beam: BCM1 vs. BCM2 run(2831)

  • 211657 12/15/10 06:49  cdaq           End of Run 8256: 

  • 211656 12/15/10 06:44  Fatiha         Beam:BCM1 vs. BCM2 run(2230)

  • 211655 12/15/10 06:43  cdaq           Run 8256: Lumi Neutral Axis Study: BPM Setting 10

  • 211654 12/15/10 06:40  cdaq           End of Run 8255: 

  • 211653 12/15/10 06:37  Fatiha         Beam:BCM1 vs. BCM2 run(8229)

  • 211652 12/15/10 06:35  cdaq           Run 8255: Lumi Neutral Axis Study: BPM Setting 9

  • 211651 12/15/10 06:33  cdaq           End of Run 8254: 

  • 211650 12/15/10 06:25  cdaq           Run 8254: Lumi Neutral Axis Study: BPM Setting 8

  • 211649 12/15/10 06:24  cdaq           End of Run 8253: 

  • 211648 12/15/10 06:19  cdaq           Run 8253: Lumi Neutral Axis Study: BPM Setting 7

  • 211647 12/15/10 06:14  cdaq           End of Run 8252: 

  • 211646 12/15/10 06:10  cdaq           Run 8252: Lumi Neutral Axis Study: BPM Setting 6

  • 211645 12/15/10 06:06  cdaq           End of Run 8251: 

  • 211644 12/15/10 06:00  cdaq           Run 8251: Lumi Neutral Axis Study: BPM Setting 5

  • 211643 12/15/10 05:59  cdaq           End of Run 8250: 

  • 211642 12/15/10 05:52  cdaq           Run 8250: Lumi Neutral Axis Study: BPM Setting 4

  • 211641 12/15/10 05:51  cdaq           End of Run 8249: 

  • 211640 12/15/10 05:43  cdaq           Run 8249: Lumi Neutral Axis Study: BPM Setting 3

  • 211639 12/15/10 05:41  cdaq           End of Run 8248: 

  • 211638 12/15/10 05:35  cdaq           Run 8248: Lumi Neutral Axis Study: BPM Setting 2

  • 211637 12/15/10 05:33  Pitt           Ignore halo part of halo and lumi run plan

  • 211636 12/15/10 05:30  cdaq           End of Run 8247: 

  • 211635 12/15/10 05:24  cdaq           Run 8247: Lumi Neutral Axis Study: BPM Setting 1

  • 211634 12/15/10 05:05  cdaq           End of Run 8246: 

  • 211633 12/15/10 05:05  seva           cavity  BCM setting for BCM5/6

  • 211632 12/15/10 05:01  L.Lee          Target: Target moved from HOME=Out-of-Beam to Hydrogen-Cell position

  • 211631 12/15/10 04:55  cdaq           Moller End of Run 675: 

  • 211630 12/15/10 04:53  seva           charge feedback up and running (and converging)

  • 211629 12/15/10 04:47  cdaq           Run 8246: Large asymm run: charge feedback ON

  • 211628 12/15/10 04:47  cdaq           Moller Run 675: large asymmetry run: charge feedback ON

  • 211627 12/15/10 04:46  cdaq           End of Run 8245: 

  • 211626 12/15/10 04:46  cdaq           Moller End of Run 674: 

  • 211625 12/15/10 04:40  cdaq           Moller Run 674: large asymmetry run: pocket cell HV =41463/42935

  • 211624 12/15/10 04:39  cdaq           Run 8245: Large asymm run: Pocket cell HV 41463/42935

  • 211623 12/15/10 04:38  cdaq           End of Run 8244: 

  • 211622 12/15/10 04:37  cdaq           Moller End of Run 673: 

  • 211621 12/15/10 04:34  seva           had some problems with Coda: stuck while configuring; rebooted all rocs, seemed to work

  • 211620 12/15/10 04:32  cdaq           Run 8244: Large asymm run: Pocket cell HV 38723/45675

  • 211619 12/15/10 04:32  cdaq           Moller Run 673: large asymmetry run: pocket cell HV =38723/45675

  • 211618 12/15/10 04:31  cdaq           Moller End of Run 672: 

  • 211617 12/15/10 04:11  cdaq           Moller Run 672: large asymmetry run: pocket cell HV =38723/45675

  • 211616 12/15/10 04:11  cdaq           End of Run 8242: 

  • 211615 12/15/10 04:10  cdaq           Moller End of Run 671: 

  • 211614 12/15/10 04:05  L.Lee          Target: Screenshot of target after JT adjustments

  • 211613 12/15/10 04:02  L.Lee          Target: Tweaked 4K and 15K JT valves

  • 211612 12/15/10 04:00  cdaq           Moller Run 671: large asymmetry run: pocket cell HV =44203/40195

  • 211611 12/15/10 03:59  cdaq           Run 8242: Large asymm run: Pocket cell HV 44203/40195

  • 211610 12/15/10 03:59  seva           killed coda due to missed helicity gates

  • 211609 12/15/10 03:59  cdaq           Moller End of Run 670: 

  • 211608 12/15/10 03:56  cdaq           End of Run 8241: 

  • 211607 12/15/10 03:53  seva           snapshot General Tools&HV

  • 211606 12/15/10 03:52  cdaq           Run 8241: Large asymm run: Pocket cell HV 44203/40195

  • 211605 12/15/10 03:52  cdaq           Moller Run 670: basline large asymmetry run: pocket cell HV =44203/40195

  • 211604 12/15/10 03:51  cdaq           Moller End of Run 669: 

  • 211603 12/15/10 03:46  seva           pocket cell HV: 44203/40195

  • 211602 12/15/10 03:45  cdaq           End of Run 8240: 

  • 211601 12/15/10 03:39  seva           charge feedback OFF

  • 211600 12/15/10 03:37  L.Lee          Target: Target brought to 1400 W in preparation for 100 uA beam

  • 211599 12/15/10 03:37  seva           zero asymmetry pocket cell HV: 41463/42935

  • 211598 12/15/10 03:36  cdaq           Moller Run 669: basline large asymmetry run: pocket cell HV =41463/42935

  • 211597 12/15/10 03:34  cdaq           Run 8240: Large asymm run: Pocket cell HV 41463/42935

  • 211596 12/15/10 03:32  cdaq           End of Run 8239: 

  • 211595 12/15/10 03:30  seva           qwfeedback convergence

  • 211594 12/15/10 03:23  seva           IOCSE20 set for "auto".; FFB, FF, and the slow orbit lock ON

  • 211593 12/15/10 03:22  seva           turned ON lumi and halo HV 

  • 211592 12/15/10 03:21  cdaq           Run 8239: asymmetry run: qwfeedback test

  • 211591 12/15/10 03:13  L.Lee          Target: 4K Flow Rate has recovered

  • 211590 12/15/10 03:11  seva           parity pocket cell HV before large asymmetry run

  • 211589 12/15/10 03:02  L.Lee          Target: 4K Flow Rate suddenly dropped

  • 211588 12/15/10 02:33  pking          Left the BCM5/6 V/F inputs disconnected for now

  • 211587 12/15/10 02:31  pking          Scope traces with pulsed beam

  • 211586 12/15/10 02:30  L.Lee          Target: ESR 15K Supply Temperature slowly climbing

  • 211585 12/15/10 02:29  seva           junk: FSD and afer it lots of missed helicity gates

  • 211584 12/15/10 02:29  cdaq           Run 8238: BCM Current dependence run

  • 211583 12/15/10 02:28  cdaq           End of Run 8237: 

  • 211582 12/15/10 02:18  cdaq           Run 8237: BCM Current dependence run

  • 211581 12/15/10 02:15  seva           BCM studies: IOCSE20 set for "gains off".;  FFB, FF, and the slow orbit lock OFF

  • 211580 12/15/10 02:15  cdaq           End of Run 8236: 

  • 211579 12/15/10 02:07  cdaq           Run 8236: baselline: after BCM17 -BCM2 switch: 150uA, BCM5/6 V to F disconnected

  • 211578 12/15/10 02:06  cdaq           End of Run 8235: 

  • 211577 12/15/10 01:59  cdaq           Run 8235: baselline: after BCM17 -BCM2 switch: 150uA

  • 211576 12/15/10 01:51  seva           BCm17 and BCM2 back to normal electronics

  • 211575 12/15/10 01:50  cdaq           End of Run 8233: 

  • 211574 12/15/10 01:36  cdaq           Run 8233: BCM17 is going into BCM2: 150uA 

  • 211573 12/15/10 01:34  cdaq           End of Run 8232: 

  • 211572 12/15/10 01:32  cdaq           Run 8232: BCM17 is going into BCM2: 150uA ; FFB,FF off

  • 211571 12/15/10 01:30  Fatiha         Beam: BCM1.vs.BPM2 (run8228)

  • 211570 12/15/10 01:30  cdaq           End of Run 8231: 

  • 211569 12/15/10 01:18  pking          Patched BCM17 RF signal into BCM2 downconverter

  • 211568 12/15/10 01:17  cdaq           Run 8231: BCM17 is  going into BCM2

  • 211567 12/15/10 01:16  cdaq           End of Run 8230: 

  • 211566 12/15/10 01:09  Fatiha         Beam: BCM1 vs. BCM2 ( run 8227)

  • 211565 12/15/10 01:04  pking          Forgot to reset the BCM5/6 gains for high current before 8229

  • 211564 12/15/10 01:03  seva           wrong BCM5/BCM6 gain setting

  • 211563 12/15/10 01:03  cdaq           Run 8230: baseline for BCM17-BCM2 switch

  • 211562 12/15/10 01:01  cdaq           End of Run 8229: 

  • 211561 12/15/10 01:00  cdaq           Run 8229: baseline for BCM17-BCM2 switch

  • 211560 12/15/10 00:25  L.Lee          Target: Screen shot of target at beginning of owl shift

  • 211559 12/15/10 00:23  Fatiha         Beam: Rub 8226

  • 211558 12/15/10 00:06  cdaq           Beam Time Accounting

  • 211557 12/15/10 00:05  W. Deconinck   Shift Summary: Swing shift summary

  • 211556 12/15/10 00:02  cdaq           End of Run 8228:

    • Tuesday

  • 211555 12/14/10 23:59  pking          Changed BCM5/6 gains to 30 for 20 uA

  • 211554 12/14/10 23:55  jwmartin       Beam: Run 8225:  20 uA CW first100k

  • 211553 12/14/10 23:53  cdaq           Run 8228: No target, 20 uA, BCM current baseline noise measurement

  • 211552 12/14/10 23:51  cdaq           End of Run 8227: 

  • 211551 12/14/10 23:48  pking          BCM5/6 gains at 150 uA

  • 211550 12/14/10 23:43  pking          Patched BCM17 electronics signal to cage

  • 211549 12/14/10 23:39  cdaq           Run 8227: No target, 150 uA, BCM current baseline noise measurement

  • 211548 12/14/10 23:37  cdaq           End of Run 8226: 

  • 211547 12/14/10 23:21  cdaq           Run 8226: No target, 70 uA, BCM current baseline noise measurement

  • 211546 12/14/10 23:04  gaskell        Moller totally backed out

  • 211545 12/14/10 23:02  magee/raitha   Moller: background studies

  • 211544 12/14/10 23:00  leacock        lumi and halo runplan for owl 15dec2010

  • 211543 12/14/10 23:00  cdaq           Run 8225: No target, 20 uA, BCM current baseline noise measurement

  • 211542 12/14/10 22:58  pking          IOCSE20 gains with 20 uA CW

  • 211541 12/14/10 22:52  W. Deconinck   Beam: Raster was screwed up, WHO DID THIS?

  • 211540 12/14/10 22:52  W. Deconinck   Beam: Requested 20 uA CW for BCM baseline noise measurements

  • 211539 12/14/10 22:50  W. Deconinck   Beam: Raster was screwed up, WHO DID THIS?

  • 211538 12/14/10 22:19  magee          BCM2 gained set to 2

  • 211537 12/14/10 22:13  cdaq           Moller End of Run 668: 

  • 211536 12/14/10 22:09  cdaq           Moller Run 668: Current scan - 0.5 uA current. collimator 5 out

  • 211535 12/14/10 22:06  cdaq           Moller End of Run 667: 

  • 211534 12/14/10 22:00  cdaq           Moller Run 667: Current scan - 1 uA current. collimator 5 out

  • 211533 12/14/10 21:58  cdaq           Moller End of Run 666: 

  • 211532 12/14/10 21:52  cdaq           Moller Run 666: Current scan - 2 uA current. collimator 5 out

  • 211531 12/14/10 21:48  cdaq           Moller End of Run 665: 

  • 211530 12/14/10 21:42  cdaq           Moller Run 665: Current scan - 2 uA current.

  • 211529 12/14/10 21:41  cdaq           Moller End of Run 664: 

  • 211528 12/14/10 21:34  cdaq           Moller Run 664: Current scan - 1.5 uA current.

  • 211527 12/14/10 21:32  cdaq           Moller End of Run 663: 

  • 211526 12/14/10 21:23  cdaq           Moller Run 663: HV adjusted left=1480, right=1500

  • 211525 12/14/10 21:22  cdaq           Moller End of Run 662: 

  • 211524 12/14/10 21:22  cdaq           Moller Run 662: Moller commissioning. Tune/position check.

  • 211523 12/14/10 21:19  buddhini       Updated QwGUI to r2334 that has the updated QwGUIDatabase tab.  Now you can plot data from DB!

  • 211522 12/14/10 21:02  leacock        halo target centering

  • 211521 12/14/10 20:57  cdaq           Moller End of Run 661: 

  • 211520 12/14/10 20:54  cdaq           Moller Run 661: Moller commissioning. Tune/position check.

  • 211519 12/14/10 20:47  cdaq           Moller End of Run 660: 

  • 211518 12/14/10 20:46  cdaq           Moller Run 660: Moller commissioning. Tune/position check.

  • 211517 12/14/10 20:43  cdaq           Moller End of Run 659: 

  • 211516 12/14/10 20:43  cdaq           Moller Run 659: Moller commissioning. Tune/position check.

  • 211515 12/14/10 20:41  cdaq           Moller End of Run 658: 

  • 211514 12/14/10 20:40  cdaq           Moller Run 658: Moller commissioning. Tune/position check.

  • 211513 12/14/10 20:36  jwmartin       screenshots for shift checklist

  • 211512 12/14/10 20:36  benesch        Beam: checked six energy measurement harps - two have problems

  • 211511 12/14/10 20:34  cdaq           Moller End of Run 657: 

  • 211510 12/14/10 20:33  cdaq           Moller Run 657: Moller commissioning. Tune/position check.

  • 211509 12/14/10 20:30  cdaq           Moller End of Run 656: 

  • 211508 12/14/10 20:29  cdaq           Moller Run 656: Moller commissioning. Tune/position check.

  • 211507 12/14/10 20:28  leacock        Target: middle of shift screenshot

  • 211506 12/14/10 20:27  leacock        Target: middle of shift screenshot

  • 211505 12/14/10 20:25  cdaq           Moller End of Run 655: 

  • 211504 12/14/10 20:23  cdaq           Moller Run 655: Moller commissioning. Tune/position check.

  • 211503 12/14/10 20:21  cdaq           Moller End of Run 654: 

  • 211502 12/14/10 20:18  cdaq           Moller Run 654: Moller commissioning. Tune/position check.

  • 211501 12/14/10 20:16  cdaq           Moller End of Run 653: 

  • 211500 12/14/10 20:12  cdaq           Moller Run 653: Moller commissioning. Tune/position check.

  • 211499 12/14/10 19:36  W. Deconinck   Beam: Jay will run some harp traces

  • 211498 12/14/10 19:15  cdaq           Moller End of Run 651: 

  • 211497 12/14/10 19:12  cdaq           Moller Run 651: Moller commissioning. Tune check.

  • 211496 12/14/10 18:58  W. Deconinck   Beam: CW beam in the Hall for Moller

  • 211495 12/14/10 18:58  smithg         my last run plans are in the shift schedule now

  • 211494 12/14/10 18:50  magee          BCM2 gain change for moller measurement

  • 211493 12/14/10 18:39  pking          Test plan for BCM checkout---version 2

  • 211492 12/14/10 17:42  mack           summary of BCM1,2 status as I understand it 

  • 211491 12/14/10 17:18  kamyers        Analysis: BCM5 and BCM6 asymmetry and dd for run 8224 - improved firmware with RF input

  • 211490 12/14/10 17:04  cdaq           End of Run 8224: 

  • 211489 12/14/10 17:02  cdaq           Run 8224: BCM Study: BCM5 and BCM6 RF input, improved firmware

  • 211488 12/14/10 16:38  jhlee          The Run 8223 is the right parity run for BCM5/6

  • 211487 12/14/10 16:16  cdaq           Beam Time Accounting

  • 211486 12/14/10 16:02  cdaq           End of Run 8223: 

  • 211485 12/14/10 15:49  cdaq           Run 8223: Parity run for BCM 5/6

  • 211484 12/14/10 15:48  cdaq           End of Run 8222: 

  • 211483 12/14/10 15:46  cdaq           Run 8222: Parity run for BCM 5/6

  • 211482 12/14/10 15:45  cdaq           End of Run 8221: 

  • 211481 12/14/10 15:45  cdaq           Run 8221: Parity run for BCM 5/6 

  • 211480 12/14/10 15:32  Kowalski       Shift Summary: Shift summary

  • 211479 12/14/10 15:15  cdaq           End of Run 8220: 

  • 211478 12/14/10 15:13  cdaq           Run 8220: Tracking DAQ test

  • 211477 12/14/10 15:04  kamyers        Late entry - table of RF input to BCM1 and BCM2 runs from 13-Dec

  • 211476 12/14/10 14:53  AK Opper       Target: 4K JT valve

  • 211475 12/14/10 14:45  cdaq           End of Run 8219: 

  • 211474 12/14/10 14:42  cdaq           Run 8219: Tracking DAQ test

  • 211473 12/14/10 14:35  cdaq           Run 8218: Tracking DAQ test

  • 211472 12/14/10 14:25  cdaq           End of Run 8217: 

  • 211471 12/14/10 14:18  cdaq           Run 8217: Tracking DAQ test

  • 211470 12/14/10 14:12  cdaq           End of Run 8216: 

  • 211469 12/14/10 14:08  kamyers        Analysis: BCM asym and double difference widths from 14-dec owl 140 uA runs

  • 211468 12/14/10 14:06  cdaq           Run 8216: Tracking DAQ test

  • 211467 12/14/10 13:52  leacock        r2 fans and low voltage on for Han's TDC test

  • 211466 12/14/10 13:33  kamyers        BCM Plots for Run 8211 - 10 uA

  • 211465 12/14/10 13:13  kamyers        Analysis: BCM5 and BCM6 plots for runs 8214 and 8215 - RF input -- WITH PLOTS!!

  • 211464 12/14/10 13:11  kamyers        Analysis: BCM5 and BCM6 plots for runs 8214 and 8215 - RF input

  • 211463 12/14/10 12:34  kamyers        BCM Plots for Run 8200

  • 211462 12/14/10 12:33  smithg         QTOR update: SCR death ray

  • 211461 12/14/10 12:28  smithg         BCM5 & 6 update

  • 211459 12/14/10 12:15  cdaq           End of Run 8215: 

  • 211458 12/14/10 11:52  kamyers        BCM Plots for Run 8187

  • 211457 12/14/10 11:48  rakithab       Analysis: Charge Feedback parameter file in the QwAnalysis/devel is updated to the revision 2332.

  • 211456 12/14/10 11:41  kamyers        BCM Plots for run 8184

  • 211455 12/14/10 11:40  pking          EPICS variables of the SEE IOC states

  • 211454 12/14/10 11:39  cdaq           Run 8215: DS 2% Al target. 10 uA

  • 211453 12/14/10 11:37  cdaq           End of Run 8214: 

  • 211452 12/14/10 11:31  kamyers        BCM Plots for Run 8181

  • 211451 12/14/10 11:28  AK Opper       Target: 15 K adjustment

  • 211450 12/14/10 11:09  cdaq           Run 8214: DS 2% Al target. 10 uA

  • 211449 12/14/10 10:24  tforest        Analysis: BCPM double diffs run 8190

  • 211448 12/14/10 10:14  pking          Analysis: BCM5 double diff run 8176

  • 211447 12/14/10 10:06  G Smith and    Target: Target parked

  • 211446 12/14/10 08:58  G Smith and    Target: screen shot at start of target park

  • 211445 12/14/10 08:46  G Smith and    Begin parking LH2 target

  • 211444 12/14/10 08:14  AK Opper       Target: Target motion glitch

  • 211443 12/14/10 08:01  cdaq           Beam Time Accounting

  • 211442 12/14/10 07:58  smacewan       Owl Shift Summary

  • 211441 12/14/10 07:43  L.Lee          Target: End of shift Screenshot of Target status

  • 211440 12/14/10 07:38  smacewan       RadCon is en route from MCC to complete our survey. Should be open by 8:30am

  • 211439 12/14/10 07:35  cdaq           End of Run 8211: 

  • 211438 12/14/10 07:29  smacewan       target for 8211 was acutally 2% US Target

  • 211437 12/14/10 07:28  seva           screenshot general Tools&HV

  • 211436 12/14/10 07:28  cdaq           Run 8211: DS 2% Al target. 10 uA

  • 211435 12/14/10 07:27  smacewan       JUNK RUN: DETECTORS WERE NOT ON

  • 211434 12/14/10 07:26  SMACEWAN       JUNK RUN: DETECTORS WERE NOT ON

  • 211433 12/14/10 07:26  smacewan       JUNK RUN: DETECTORS WERE NOT ON

  • 211432 12/14/10 07:26  smacewan       JUNK RUN: DETECTORS WERE NOT ON

  • 211431 12/14/10 07:26  smacewan       JUNK RUN: DETECTORS WERE NOT ON

  • 211430 12/14/10 07:24  seva           and explanation

  • 211429 12/14/10 07:18  seva           and plots

  • 211428 12/14/10 07:14  seva           summary (and some analysis) of lumi BPM scan

  • 211427 12/14/10 07:11  cdaq           Run 8210: US 2% Al target. 10 uA

  • 211426 12/14/10 07:08  L.Lee          Target: Target moved from US-4%-Aluminum to US-2%-Aluminum position

  • 211425 12/14/10 07:04  cdaq           End of Run 8209: 

  • 211424 12/14/10 07:01  L.Lee          Target: Target moved from DS-8%-Aluminum to US-4%-Aluminum position

  • 211423 12/14/10 07:00  L.Lee          Target: Target Temperature alarm on QWT_ladderB

  • 211422 12/14/10 06:58  cdaq           Run 8209: US 4% Al target. 10 uA

  • 211421 12/14/10 06:57  cdaq           End of Run 8208: 

  • 211420 12/14/10 06:52  cdaq           Run 8208: DS 8% Al target. 10 uA

  • 211419 12/14/10 06:51  L.Lee          Target: Target moved from DS-4%-Aluminum to DS-8%-Aluminum position

  • 211418 12/14/10 06:47  L.Lee          Target: Re: Target moved from DS-2%-Aluminum to DS-4%-Aluminum position

  • 211417 12/14/10 06:46  cdaq           End of Run 8207: 

  • 211416 12/14/10 06:43  smacewan       Backed out of harp scans: deffered until tomorrow (?) so we can transition into restricted access.

  • 211415 12/14/10 06:39  L.Lee          Target: Target moved from DS-2%-Aluminum to DS-4%-Aluminum position

  • 211414 12/14/10 06:37  cdaq           Run 8207: DS 4% Al target. 10 uA

  • 211413 12/14/10 06:26  cdaq           End of Run 8206: 

  • 211412 12/14/10 06:22  cdaq           Run 8206: DS 2% Al target. 10 uA

  • 211411 12/14/10 06:20  smacewan       Harp Scans Have to wait until end of shift/start of owl. Going to solid tgt runs

  • 211410 12/14/10 06:19  L.Lee          Target: Target moved from Hydrogen-Cell to DS-2%-Aluminum position

  • 211409 12/14/10 05:54  smacewan       MCC doing harp scan

  • 211408 12/14/10 05:31  cdaq           End of Run 8205: 

  • 211407 12/14/10 05:28  smacewan       8204 is actually BPM Setting #26

  • 211406 12/14/10 05:27  smacewan       8203 is actually BPM Setting #25

  • 211405 12/14/10 05:26  cdaq           Run 8205: Neutral Axis Study: BPM Setting #27

  • 211404 12/14/10 05:24  cdaq           End of Run 8204: 

  • 211403 12/14/10 05:20  cdaq           Prompt Summary : Run 8177 : QwPass1_

  • 211402 12/14/10 05:15  cdaq           Run 8204: Neutral Axis Study: BPM Setting #25

  • 211401 12/14/10 05:11  cdaq           End of Run 8203: 

  • 211400 12/14/10 05:07  cdaq           Run 8203: Neutral Axis Study: BPM Setting #24

  • 211399 12/14/10 05:01  cdaq           End of Run 8202: 

  • 211398 12/14/10 04:56  cdaq           Run 8202: Neutral Axis Study: BPM Setting #24

  • 211397 12/14/10 04:51  smacewan       Skipping BPM Settings #21, 22, 23.

  • 211396 12/14/10 04:40  smacewan       Skipping BPM Setting #20 :: Halo rates through the roof + beam trip

  • 211395 12/14/10 04:29  cdaq           End of Run 8201: 

  • 211394 12/14/10 04:22  cdaq           Run 8201: Neutral Axis Study: BPM Setting #19

  • 211393 12/14/10 04:17  L.Lee          Target: Alarm on IOC 4 (Halo Rates)

  • 211392 12/14/10 04:15  cdaq           End of Run 8200: 

  • 211391 12/14/10 04:08  cdaq           Run 8200: Neutral Axis Study: BPM Setting #18

  • 211390 12/14/10 04:04  cdaq           End of Run 8199: 

  • 211389 12/14/10 03:57  cdaq           Run 8199: Neutral Axis Study: BPM Setting #17

  • 211388 12/14/10 03:56  cdaq           End of Run 8198: 

  • 211387 12/14/10 03:52  cdaq           Run 8198: Neutral Axis Study: BPM Setting #17

  • 211386 12/14/10 03:43  cdaq           End of Run 8197: 

  • 211385 12/14/10 03:40  smacewan       Switched QWeak General Tools to report 3h07c instead of 3h09

  • 211384 12/14/10 03:39  cdaq           Run 8197: Neutral Axis Study: BPM Setting #16

  • 211383 12/14/10 03:37  seva           Analysis Plots Run 8194: BCM Plots

  • 211382 12/14/10 03:35  cdaq           End of Run 8196: 

  • 211381 12/14/10 03:29  smacewan       Run 8195 is junk

  • 211380 12/14/10 03:28  cdaq           Run 8196: Neutral Axis Study: BPM Setting #15

  • 211379 12/14/10 03:28  seva           screenshot general Tools&HV

  • 211378 12/14/10 03:27  cdaq           End of Run 8195: 

  • 211377 12/14/10 03:25  cdaq           Run 8195: Neutral Axis Study: BPM Setting #15

  • 211376 12/14/10 03:14  cdaq           End of Run 8194: 

  • 211375 12/14/10 03:06  cdaq           Run 8194: Neutral Axis Study: BPM Setting #14

  • 211374 12/14/10 03:02  cdaq           End of Run 8193: 

  • 211373 12/14/10 02:56  cdaq           Run 8193: Neutral Axis Study: BPM Setting #13

  • 211372 12/14/10 02:50  cdaq           End of Run 8192: 

  • 211371 12/14/10 02:44  cdaq           Run 8192: Neutral Axis Study: BPM Setting #12

  • 211370 12/14/10 02:39  cdaq           End of Run 8191: 

  • 211369 12/14/10 02:37  jhlee          this is "test" entry

  • 211368 12/14/10 02:34  cdaq           Run 8191: Neutral Axis Study: BPM Setting #11

  • 211367 12/14/10 02:23  jhlee          This is "test" entry

  • 211366 12/14/10 02:23  cdaq           End of Run 8190: 

  • 211365 12/14/10 02:21  cdaq           Raster Map and BPMs : Run 7338, event range 825000 - 845000

  • 211364 12/14/10 02:19  cdaq           Raster Map and BPMs : Run 7338, event range 825000 - 845000

  • 211363 12/14/10 02:15  cdaq           Run 8190: Neutral Axis Study: BPM Setting #10

  • 211362 12/14/10 02:13  cdaq           End of Run 8189: 

  • 211361 12/14/10 02:06  cdaq           Run 8189: Neutral Axis Study: BPM Setting #9

  • 211360 12/14/10 02:04  cdaq           End of Run 8188: 

  • 211359 12/14/10 01:59  cdaq           Run 8188: Neutral Axis Study: BPM Setting #8

  • 211358 12/14/10 01:57  cdaq           End of Run 8187: 

  • 211357 12/14/10 01:56  cdaq           Prompt Summary : Run 8176 : QwPass1_

  • 211356 12/14/10 01:55  cdaq           Prompt Summary : Run 8175 : QwPass1_

  • 211355 12/14/10 01:51  cdaq           Run 8187: Neutral Axis Study: BPM Setting #7

  • 211354 12/14/10 01:51  cdaq           Prompt Summary : Run 8174 : QwPass1_

  • 211353 12/14/10 01:48  cdaq           End of Run 8186: 

  • 211352 12/14/10 01:47  seva           Analysis Plots Run 8173: BCM Plots

  • 211351 12/14/10 01:42  cdaq           Run 8186: Neutral Axis Study: BPM Setting #6

  • 211350 12/14/10 01:39  cdaq           End of Run 8185: 

  • 211349 12/14/10 01:35  cdaq           Run 8185: Neutral Axis Study: BPM Setting #5

  • 211348 12/14/10 01:31  cdaq           End of Run 8184: 

  • 211347 12/14/10 01:25  cdaq           Run 8184: Neutral Axis Study: BPM Setting #4

  • 211346 12/14/10 01:21  cdaq           End of Run 8183: 

  • 211345 12/14/10 01:17  cdaq           Run 8183: Neutral Axis Study: BPM Setting #3

  • 211344 12/14/10 01:13  cdaq           End of Run 8182: 

  • 211343 12/14/10 01:09  cdaq           Run 8182: Neutral Axis Study: BPM Setting #2

  • 211342 12/14/10 01:06  cdaq           End of Run 8181: 

  • 211341 12/14/10 01:04  pking          Started new parity autoanalyzer version

  • 211340 12/14/10 01:01  cdaq           Run 8181: Neutral Axis Study: BPM Setting #1

  • 211339 12/14/10 00:46  L.Lee          Target: Target moved from HOME=Out-of-Beam to Hydrogen-Cell position

  • 211338 12/14/10 00:42  cdaq           End of Run 8180: 

  • 211337 12/14/10 00:36  cdaq           Run 8180: Lumi signal study

  • 211336 12/14/10 00:35  cdaq           End of Run 8179: 

  • 211335 12/14/10 00:31  smacewan       8178 is junk, FFB off

  • 211334 12/14/10 00:19  cdaq           Run 8179: Neutral Axis Current Scan Run

  • 211333 12/14/10 00:18  cdaq           End of Run 8178: 

  • 211332 12/14/10 00:17  cdaq           Run 8178: Neutral Axis Current Scan Run

  • 211331 12/14/10 00:07  cdaq           Beam Time Accounting

  • 211330 12/14/10 00:06  smacewan       HV's turned on for start of neutral axis studies

  • 211329 12/14/10 00:02  L.Lee          Target: Screen shot of target at beginning of owl shift

    • Monday

  • 211328 12/13/10 23:59  jwmartin       Shift Summary: Swing Shift Summary

  • 211327 12/13/10 23:58  jhlee          I am woking on this script :-)

  • 211326 12/13/10 23:58  cdaq           End of Run 8177: 

  • 211325 12/13/10 23:58  jwmartin       Beam: PITA feedback issues.

  • 211324 12/13/10 23:54  jwmartin       PITA feedback switched off

  • 211323 12/13/10 23:53  cdaq           Prompt Summary : Run 8172 : QwPass1_

  • 211322 12/13/10 23:53  cdaq           Prompt Summary : Run 8173 : QwPass1_

  • 211321 12/13/10 23:49  kamyers        error when running prompt_summary

  • 211320 12/13/10 23:42  kamyers        charge asymmetry dropped fast in run 8174

  • 211319 12/13/10 23:23  jwmartin       PITA settings close to before the PITA feedback started railing

  • 211318 12/13/10 23:20  jwmartin       PITA feedback railed

  • 211317 12/13/10 23:07  kamyers        Run 8177: current bcm asymmetry is very large

  • 211316 12/13/10 23:00  mack           brief summary of today's RF signal generator studies - no photos, no tables

  • 211315 12/13/10 22:58  cdaq           Run 8126 : Prompt summary

  • 211314 12/13/10 22:52  Ramesh         cavity BPM status

  • 211313 12/13/10 22:51  cdaq           Run 8177: BCM studies: Gains off on iocse20, 75 uA, and BCM5 gains set

  • 211312 12/13/10 22:41  kamyers        Analysis: Run's 8175, 8176: BCM Plots - 75 uA autogain OFF

  • 211311 12/13/10 22:25  jwmartin       Beam: BCM5 settings adjusted by Trent Allison

  • 211310 12/13/10 22:22  cdaq           Run 8176: BCM studies: Gains off on iocse20, 75 uA, and BCM5 gains set

  • 211309 12/13/10 22:21  kamyers        Analysis: Run 8174: BCM Plots - 150 uA autogain OFF

  • 211308 12/13/10 22:20  cdaq           End of Run 8175: 

  • 211307 12/13/10 22:19  kamyers        Analysis: Run 8173: BCM Plots - 150 uA autogain ON

  • 211306 12/13/10 22:15  cdaq           Run 8175: BCM studies: Gains off on iocse20, 75 uA

  • 211305 12/13/10 22:14  kamyers        IOCSE20 gains - autogain off 75 uA

  • 211304 12/13/10 22:10  cdaq           End of Run 8174: 

  • 211303 12/13/10 21:59  jhlee          please run "prompt_summary" when  QwPass1_ is ready to be analyzed 

  • 211302 12/13/10 21:57  jwmartin       run 8174 - the beam current is 150 uA

  • 211301 12/13/10 21:51  kamyers        IOCSE20 gains - autogain off 150 uA

  • 211300 12/13/10 21:50  cdaq           Run 8174: BCM studies:  Gains off on iocse20

  • 211299 12/13/10 21:46  jhlee          TEST:: Run 8150 : Prompt summary

  • 211298 12/13/10 21:45  cdaq           End of Run 8173: 

  • 211297 12/13/10 21:33  cdaq           TEST: Run 8150 : Prompt summary

  • 211296 12/13/10 21:19  cdaq           Run 8173: BCM studies:  CW 150 uA, no target

  • 211295 12/13/10 21:18  cdaq           End of Run 8172: 

  • 211294 12/13/10 21:16  paschke        Suggestions for BPM "Gains Off" test

  • 211293 12/13/10 21:13  cdaq           Run 8172: beam ramp to 150 uA

  • 211292 12/13/10 21:13  kamyers        HV and General Tools screenshots for swing shift checklist

  • 211291 12/13/10 21:04  kamyers        Analysis: BCM asym and double difference widths from 13-dec owl runs

  • 211290 12/13/10 20:30  paschke        BCM cabling change

  • 211289 12/13/10 20:26  leacock        Target: 15K inlet temp rising

  • 211288 12/13/10 20:01  paschke        BCM cables, terminated after first extension

  • 211287 12/13/10 19:38  leacock        Target: opened 4K JT valve 0.6% in preparation for 150uA on LH2

  • 211286 12/13/10 19:00  leacock        lumi plans for tonight

  • 211285 12/13/10 18:53  kamyers        Plots for run 8171: BCM study, bcm1 and 2 signals terminated

  • 211284 12/13/10 18:48  cdaq           End of Run 8171: 

  • 211283 12/13/10 18:47  smithg         QTOR update: still no dice

  • 211282 12/13/10 18:43  cdaq           Run 8171: BCM signal studies:  BCM1 and 2 cables terminated

  • 211281 12/13/10 18:42  smithg,carli   BCM 5 & 6 electronics back in Hall C

  • 211280 12/13/10 18:40  kamyers        Plots for run 8170: BCM study, -20 dBm bcm1 dosconnected

  • 211279 12/13/10 18:32  cdaq           End of Run 8170: 

  • 211278 12/13/10 18:31  kamyers        Plots for run 8169: BCM study, 0dBm, bcm1 disconnected

  • 211277 12/13/10 18:29  cdaq           Run 8170: BCM signal studies: -20 dBm, IBC3C20 disconnected, IBC3C20A connected

  • 211276 12/13/10 18:18  cdaq           End of Run 8169: 

  • 211275 12/13/10 18:13  cdaq           Run 8169: BCM signal studies: 0 dBm, IBC3C20 disconnected, IBC3C20A connected

  • 211274 12/13/10 18:01  kamyers        Plots for run 8168: BCM study -20 dBm

  • 211273 12/13/10 17:53  cdaq           End of Run 8168: 

  • 211272 12/13/10 17:49  cdaq           Run 8168: BCM signal studies: -20 dBm

  • 211271 12/13/10 17:40  kamyers        Plots for run 8167: BCM study, +0dBm, function generator at first extension

  • 211270 12/13/10 17:33  gaskell        Compton: large charge asymmetry run

  • 211269 12/13/10 17:28  cdaq           End of Run 8167: 

  • 211268 12/13/10 17:23  cdaq           Run 8167: BCM signal studies: function gen at first extension, 0 dBm

  • 211267 12/13/10 17:08  kamyers        Plots for run 8166, BCM study +6 dbM

  • 211266 12/13/10 17:05  kamyers        Plots for run 8165, BCM study +5 dBm

  • 211265 12/13/10 17:00  kamyers        Plots for run 8164, BCM study +4 dBm

  • 211264 12/13/10 16:48  kamyers        additional plot for run 8160

  • 211263 12/13/10 16:42  kamyers        Plots for run 8160, BCM study +3 dBm

  • 211262 12/13/10 16:39  cdaq           Moller End of Run 650: 

  • 211261 12/13/10 16:37  cdaq           Moller Run 650: DAQ check

  • 211260 12/13/10 16:30  cdaq           End of Run 8166: 

  • 211259 12/13/10 16:28  leacock        Target: actual screenshot at beginning of shift

  • 211258 12/13/10 16:28  pking          Plots for run 8161, BCM study +0 dBm

  • 211257 12/13/10 16:25  pking          Plots for run 8162, BCM study -3 dBm

  • 211256 12/13/10 16:23  cdaq           Run 8166: BCM signal studies: +6 dBm

  • 211255 12/13/10 16:22  cdaq           End of Run 8165: 

  • 211254 12/13/10 16:19  pking          Plots for run 8163, BCM study -6 dBm

  • 211253 12/13/10 16:16  cdaq           Run 8165: BCM signal studies: +5 dBm

  • 211252 12/13/10 16:10  leacock        Target: screenshot at beginning of shift

  • 211251 12/13/10 16:10  cdaq           End of Run 8164: 

  • 211250 12/13/10 16:02  cdaq           Run 8164: BCM signal studies: +4 dBm

  • 211249 12/13/10 16:01  cdaq           Beam Time Accounting

  • 211248 12/13/10 16:00  cdaq           End of Run 8163: 

  • 211247 12/13/10 15:52  cdaq           Run 8163: BCM signal studies: -6 dBm

  • 211246 12/13/10 15:47  cdaq           End of Run 8162: 

  • 211245 12/13/10 15:41  cdaq           Run 8162: BCM signal studies: -3 dBm

  • 211244 12/13/10 15:39  cdaq           End of Run 8161: 

  • 211243 12/13/10 15:33  cdaq           Run 8161: BCM signal studies: +0dBm

  • 211242 12/13/10 15:30  cdaq           End of Run 8160: 

  • 211241 12/13/10 15:29  cdaq           Moller End of Run 648: 

  • 211240 12/13/10 15:29  Jiawei         pumping down 15k IV

  • 211239 12/13/10 15:28  cdaq           Moller Run 648: NIM troubleshooting

  • 211238 12/13/10 15:26  Kowalski       Shift Summary: Shift summary

  • 211237 12/13/10 15:25  cdaq           Moller End of Run 647: 

  • 211236 12/13/10 15:25  kamyers        Analysis: BCM noise related plots for run 8151 - 150 uA

  • 211235 12/13/10 15:24  cdaq           Moller Run 647: NIM troubleshooting

  • 211234 12/13/10 15:22  cdaq           Run 8160: FF/FFB Beam Modulation Response Program

  • 211233 12/13/10 15:20  cdaq           Moller End of Run 646: 

  • 211232 12/13/10 15:19  cdaq           Moller Run 646: NIM troubleshooting

  • 211231 12/13/10 15:11  beaufait       qtor progress

  • 211230 12/13/10 15:06  Kowalski       Signal Tests on BC M

  • 211229 12/13/10 14:55  gaskell        Compton: increased BCM17 attenuation

  • 211228 12/13/10 14:52  smithg         QTOR SCR photos

  • 211227 12/13/10 14:21  tforest        checklist screenshots

  • 211226 12/13/10 12:51  Jiawei         Target: Target brought back to the previous condition

  • 211225 12/13/10 12:19  Jiawei         Target: Maximum 15K flow test

  • 211224 12/13/10 11:52  Pitt           Restored halo monitor high current HV settings

  • 211223 12/13/10 11:33  Jiawei         Target: Maximum 15K flow test

  • 211222 12/13/10 10:40  tforest        R1 gas and HV trip

  • 211221 12/13/10 10:09  Jiawei         Target: done parking the target partially

  • 211220 12/13/10 09:10  Jiawei         Target: start to park the target partially

  • 211219 12/13/10 08:28  Jiawei         Target: Target is out of beam now

  • 211218 12/13/10 08:20  Jiawei         Target: Start of shift Target Screenshots & Status

  • 211217 12/13/10 08:12  cdaq           End of Run 8157: 

  • 211216 12/13/10 08:11  seva           beam OFF; turned off halo's and Lumis'; target out; waiting for radcon

  • 211215 12/13/10 08:09  cdaq           Beam Time Accounting

  • 211214 12/13/10 07:59  cdaq           Run 8157: Target boiling study: 175uA, 4x4,pump 19.8Hz

  • 211213 12/13/10 07:56  seva           owl shift summary

  • 211212 12/13/10 07:52  seva           asked to go to controlled

  • 211211 12/13/10 07:51  cdaq           Run 8156: junk

  • 211210 12/13/10 07:51  seva           restarted coda

  • 211209 12/13/10 07:48  cdaq           Run 8155: Target boiling study: 175uA, 4x4,pump 19.8Hz

  • 211208 12/13/10 07:47  cdaq           End of Run 8154: 

  • 211207 12/13/10 07:41  cdaq           Run 8154: Target boiling study: 175uA, 4x4,pump 19.8

  • 211206 12/13/10 07:32  cdaq           End of Run 8153: 

  • 211205 12/13/10 07:29  L.Lee          Target: Restored Alarm setpoint ("LOW"=0.30) for "H2 Pump Head diff. pressure" 

  • 211204 12/13/10 07:25  cdaq           Run 8153: Target boiling study: 100uA, 4x4,pump 19.8

  • 211203 12/13/10 07:23  cdaq           End of Run 8152: 

  • 211202 12/13/10 07:19  cdaq           Run 8152: Target boiling study: 140uA, 4x4,pump 19.8

  • 211201 12/13/10 07:13  cdaq           End of Run 8151: 

  • 211200 12/13/10 07:07  cdaq           Run 8151: Target boiling study: 160uA, 4x4,pump 19.8

  • 211199 12/13/10 07:06  cdaq           End of Run 8150: 

  • 211198 12/13/10 07:00  cdaq           Run 8150: Target boiling study: 120uA, 4x4,pump 19.8

  • 211197 12/13/10 06:59  cdaq           End of Run 8149: 

  • 211196 12/13/10 06:58  seva           single run with following currents

  • 211195 12/13/10 06:53  cdaq           Run 8149: Target boiling study: 80uA, 4x4,pump 19.8

  • 211194 12/13/10 06:51  cdaq           End of Run 8148: 

  • 211193 12/13/10 06:48  cdaq           Run 8148: Target boiling study: 40uA, 4x4,pump 19.8

  • 211192 12/13/10 06:45  L.Lee          Target: Target moved from DS-0.5%-C back to Hydrogen-Cell position

  • 211191 12/13/10 06:42  cdaq           End of Run 8147: 

  • 211190 12/13/10 06:01  L.Lee          Target: H2 Pump tripped OFF (while it was running at 15 Hz).

  • 211189 12/13/10 05:58  L.Lee          Target: Target moved from Hydrogen-Cell to DS-0.5%-C position

  • 211188 12/13/10 05:55  cdaq           Run 8147: 0.5% carbon target, current scan, 4x4

  • 211187 12/13/10 05:46  cdaq           End of Run 8146: 

  • 211186 12/13/10 05:34  cdaq           Run 8146: Target boiling study: 10uA, 5x5,pump 15.0

  • 211185 12/13/10 05:29  seva           changed raster to 5x5

  • 211184 12/13/10 05:19  cdaq           End of Run 8145: 

  • 211183 12/13/10 05:15  cdaq           Run 8145: Target boiling study: 160uA, 4x4,pump 15.0

  • 211182 12/13/10 05:12  cdaq           End of Run 8144: 

  • 211181 12/13/10 05:08  cdaq           Run 8144: Target boiling study: 120uA, 4x4,pump 15.0

  • 211180 12/13/10 05:07  cdaq           End of Run 8143: 

  • 211179 12/13/10 05:01  cdaq           Run 8143: Target boiling study: 80uA, 4x4,pump 15.0

  • 211178 12/13/10 04:55  cdaq           End of Run 8142: 

  • 211177 12/13/10 04:52  L.Lee          Target: Alarm setpoint for H2 Pump Head Diff. pressure temporarily lowered

  • 211176 12/13/10 04:51  cdaq           Run 8142: Target boiling study: 40uA, 4x4,pump 15.0

  • 211175 12/13/10 04:49  cdaq           End of Run 8141: 

  • 211174 12/13/10 04:44  cdaq           Run 8141: Target boiling study: 10uA, 4x4,pump 15.0

  • 211173 12/13/10 04:39  cdaq           End of Run 8140: 

  • 211172 12/13/10 04:34  cdaq           Run 8140: Target boiling study: 160uA, 4x4,pump 19.8

  • 211171 12/13/10 04:28  cdaq           Run 8139: Target boiling study: 160uA, 4x4,pump 19.8

  • 211170 12/13/10 04:21  cdaq           End of Run 8138: 

  • 211169 12/13/10 04:16  cdaq           Run 8138: Target boiling study: 120uA, 4x4,pump 19.8

  • 211168 12/13/10 04:15  cdaq           End of Run 8137: 

  • 211167 12/13/10 04:10  cdaq           Run 8137: Target boiling study: 80uA, 4x4,pump 19.8

  • 211166 12/13/10 04:09  L.Lee          Target: LH2 Pump Freq varied as part of Target Boiling studies

  • 211165 12/13/10 04:07  cdaq           End of Run 8136: 

  • 211164 12/13/10 04:02  cdaq           Run 8136: Target boiling study: 40uA, 4x4,pump 19.8

  • 211163 12/13/10 04:00  cdaq           End of Run 8135: 

  • 211162 12/13/10 03:59  covrig         double peaking in y

  • 211161 12/13/10 03:56  seva           screenshot general Tools& HV

  • 211160 12/13/10 03:54  cdaq           Run 8135: Target boiling study: 10uA, 4x4,pump 19.8

  • 211159 12/13/10 03:52  cdaq           End of Run 8134: 

  • 211158 12/13/10 03:47  cdaq           Run 8134: Target boiling study: 160uA, 4x4,pump 24.9

  • 211157 12/13/10 03:46  cdaq           End of Run 8133: 

  • 211156 12/13/10 03:41  cdaq           Run 8133: Target boiling study: 120uA, 4x4,pump 24.9

  • 211155 12/13/10 03:40  cdaq           End of Run 8132: 

  • 211154 12/13/10 03:35  cdaq           Run 8132: Target boiling study: 80uA, 4x4,pump 24.9

  • 211153 12/13/10 03:34  cdaq           End of Run 8131: 

  • 211152 12/13/10 03:29  cdaq           Run 8131: Target boiling study: 40uA, 4x4,pump 24.9

  • 211151 12/13/10 03:28  cdaq           End of Run 8130: 

  • 211150 12/13/10 03:23  cdaq           Run 8130: Target boiling study: 10uA, 4x4,pump 24.9

  • 211149 12/13/10 03:22  cdaq           End of Run 8129: 

  • 211148 12/13/10 03:16  cdaq           Run 8129: Target boiling study: 10uA, 4x4,pump 29.4

  • 211147 12/13/10 03:15  cdaq           End of Run 8128: 

  • 211146 12/13/10 03:10  cdaq           Run 8128: Target boiling study: 40uA, 4x4,pump 29.4

  • 211145 12/13/10 03:09  cdaq           End of Run 8127: 

  • 211144 12/13/10 03:03  cdaq           Run 8127: Target boiling study: 80uA, 4x4,pump 29.4

  • 211143 12/13/10 03:01  cdaq           End of Run 8126: 

  • 211142 12/13/10 02:59  mack           other BCM stuff done Sunday evening

  • 211141 12/13/10 02:56  cdaq           Run 8126: Target boiling study: 160uA, 4x4,pump 29.4

  • 211140 12/13/10 02:55  cdaq           End of Run 8125: 

  • 211139 12/13/10 02:51  cdaq           Run 8125: Target boiling study: 120uA, 4x4,pump 29.4

  • 211138 12/13/10 02:49  cdaq           End of Run 8124: 

  • 211137 12/13/10 02:42  cdaq           Run 8124: Target boiling study: 80uA, 4x4,pump 29.4

  • 211136 12/13/10 02:41  cdaq           End of Run 8123: 

  • 211135 12/13/10 02:36  cdaq           Run 8123: Target boiling study: 40uA, 4x4,pump 29.4

  • 211134 12/13/10 02:29  cdaq           End of Run 8122: 

  • 211133 12/13/10 02:23  cdaq           Run 8122: Target boiling study: 10uA, 4x4,pump 29.4

  • 211132 12/13/10 02:22  cdaq           End of Run 8121: 

  • 211131 12/13/10 02:15  cdaq           Run 8121: Target boiling study: 10uA, 4x4,pump 29.4

  • 211130 12/13/10 02:14  cdaq           End of Run 8120: 

  • 211129 12/13/10 02:14  seva           current mode lumi HV ON; changed helicity gates from fake to real

  • 211128 12/13/10 02:09  cdaq           Run 8120: Target boiling study: 10uA, 4x4,pump 29.4

  • 211127 12/13/10 01:51  mack           BCM1,2 long RF cable runs: pathetic but well matched

  • 211126 12/13/10 01:39  L.Lee          Target: Target moved from HOME=Out-of-Beam to Hydrogen-Cell position

  • 211125 12/13/10 01:14  covrig         checklist snapshots

  • 211124 12/13/10 00:24  seva           asked for beam; boiling studies next

  • 211123 12/13/10 00:17  seva           settings at beginning of owl shift

  • 211122 12/13/10 00:03  jwmartin       Shift Summary: Swing Shift Summary

  • 211121 12/13/10 00:00  cdaq           Beam Time Accounting

    • Sunday

  • 211120 12/12/10 23:57  Pitt           Target: End of shift Screenshot

  • 211119 12/12/10 23:05  cdaq           Beam Time Accounting

  • 211118 12/12/10 18:46  magee          HV settings and general tools snapshots

  • 211117 12/12/10 16:31  Adesh/Pitt     Target: Target unparked; ready for high current beam

  • 211116 12/12/10 15:30  Kowalski       Shift Summary: Shift summary

  • 211115 12/12/10 15:07  Adesh          Target: beginning target un-parking procedure

  • 211114 12/12/10 14:58  Pitt/Leacock   Controlled access changes for Lumis and Region 2

  • 211113 12/12/10 14:39  mack           BCM update

  • 211112 12/12/10 14:18  pking          Minor update to QwAnalysis/devel

  • 211111 12/12/10 13:21  smithg         Analysis: Lumi correlations with beam motion

  • 211110 12/12/10 13:16  pking          Rates in event mode lumis/scints  with high current from EPICS archiver

  • 211109 12/12/10 12:30  pking          Notes about the spectrum analysis traces taken for BCM1/BCM2 today

  • 211108 12/12/10 11:47  leacock        EVENT MODE LUMIs and R2 scintillators on at 100uA!!!!  <-----BAD!!!

  • 211107 12/12/10 09:55  Adesh          fault code for this pump trip

  • 211106 12/12/10 09:43  Adesh          Target: Faut code for this pump trip

  • 211105 12/12/10 08:07  cdaq           Beam Time Accounting

  • 211104 12/12/10 07:44  L.Lee          Target: Screen shot of target at end of owl shift

  • 211103 12/12/10 07:28  seva           owl shift summary

  • 211102 12/12/10 07:18  seva           and png files of excell tables

  • 211101 12/12/10 07:14  seva           lumi programm summary

  • 211100 12/12/10 07:14  seva           lumi programm summary

  • 211099 12/12/10 07:10  cdaq           Beam Time Accounting

  • 211098 12/12/10 07:08  L.Lee          Target: Target moved to HOME=Out-of-Beam position

  • 211097 12/12/10 06:58  seva           finished run plan: asked for beam off

  • 211096 12/12/10 06:55  cdaq           End of Run 8119: 

  • 211095 12/12/10 06:11  cdaq           Run 8119: lumi programm: corrector magnet changes; beam ON

  • 211094 12/12/10 06:10  covrig         screen shots for shift checklist

  • 211093 12/12/10 06:10  L.Lee          Target: LH2 Pump Trip

  • 211092 12/12/10 06:09  cdaq           End of Run 8118: 

  • 211091 12/12/10 05:53  cdaq           Run 8118: lumi programm: corrector magnet changes

  • 211090 12/12/10 05:52  cdaq           Run 8118: lumi  programm: corrector magnet changes

  • 211089 12/12/10 05:51  cdaq           End of Run 8117: 

  • 211088 12/12/10 05:05  seva           chnged corrector values: MAP3H07 H -1979; MBD3H06 -999

  • 211087 12/12/10 04:49  seva           Corrector magnet settings: MBD3H02 H = 1876 MAP3H07 H = -2389 MBD3H02 V = 958 MBD3H06 V = -1000

  • 211086 12/12/10 04:36  seva           curent of 1.09 nA was verified with PCup

  • 211085 12/12/10 04:31  cdaq           End of Run 8116: 

  • 211084 12/12/10 04:29  L.Lee          Target: Target moved to Hydrogen-Cell position

  • 211083 12/12/10 04:29  seva           new setting: R2 HV off, left scintilators ON, LH2 target, ps5=max, ps1=0, 1nA current

  • 211082 12/12/10 04:27  seva           Lumi rates during R2 runs

  • 211081 12/12/10 04:24  seva           R2 work done; turned off R2 HV

  • 211080 12/12/10 04:22  seva           R2 chamber run summary

  • 211079 12/12/10 04:22  seva           R2 chamber run summary

  • 211078 12/12/10 04:13  seva           Optics135 target: screenshot Epics scaler&HV R2

  • 211077 12/12/10 04:11  cdaq           Run 8116: r2 tracking on Optics135 target

  • 211076 12/12/10 03:56  L.Lee          Target: Target moved to Optics-135 position

  • 211075 12/12/10 03:51  cdaq           End of Run 8115: 

  • 211074 12/12/10 03:43  seva           Optics3 target: screenshot Epics scaler&HV R2

  • 211073 12/12/10 03:40  cdaq           Run 8115: r2 tracking on Optics3 target

  • 211072 12/12/10 03:39  L.Lee          Target: Target moved to Optics-3 position

  • 211071 12/12/10 03:38  mack           summary table of Rob's plots for RF signal generator runs with BCM1,2 

  • 211070 12/12/10 03:36  cdaq           End of Run 8114: 

  • 211069 12/12/10 03:27  seva           Optics15 target: screenshot Epics&HV

  • 211068 12/12/10 03:25  cdaq           Run 8114: r2 tracking on Optics15 target

  • 211067 12/12/10 03:24  L.Lee          Target: Target moved to Optics-15 position

  • 211066 12/12/10 03:20  cdaq           End of Run 8113: 

  • 211065 12/12/10 03:11  cdaq           Run 8113: r2 tracking on Optics1345 target

  • 211064 12/12/10 03:08  cdaq           End of Run 8112: 

  • 211063 12/12/10 02:57  seva           Optics1345 target: screenshot Epics&HV

  • 211062 12/12/10 02:54  cdaq           Run 8112: r2 tracking on Optics1345 target

  • 211061 12/12/10 02:52  L.Lee          Target: Target moved to Optics-1345 position

  • 211060 12/12/10 02:48  cdaq           End of Run 8111: 

  • 211059 12/12/10 02:42  leacock        resetting the power of roc9 and roc10 fixed the missing wires

  • 211058 12/12/10 02:39  seva           dead channels on some  R2 cards; reseted ROC9 and ROC10

  • 211057 12/12/10 02:37  cdaq           Run 8111: r2 tracking on Optics1235 target

  • 211056 12/12/10 02:33  cdaq           End of Run 8110: 

  • 211055 12/12/10 02:25  seva           Optics1235 target: screenshot Epics&HV

  • 211054 12/12/10 02:24  cdaq           Run 8110: r2 tracking on Optics1235 target

  • 211053 12/12/10 02:23  L.Lee          Target: Target Moved to Optics-1235 position

  • 211052 12/12/10 02:21  cdaq           End of Run 8109: 

  • 211051 12/12/10 02:19  brads          re: ethane bottle is not on a scale

  • 211050 12/12/10 02:08  Pitt           Region 2 leakage currents for run 8109- Optics 12345

  • 211049 12/12/10 02:04  cdaq           Run 8109: r2 tracking on Optics12345 target

  • 211048 12/12/10 01:59  L.Lee          Target: Target Moved to Optics-12345 

  • 211047 12/12/10 01:54  rob            followup about ethane

  • 211046 12/12/10 01:53  cdaq           End of Run 8108: 

  • 211045 12/12/10 01:41  cdaq           Run 8108: r2 tracking on lh2

  • 211044 12/12/10 01:36  Pitt           Region 2 leakage currents and fast or rates - attachments

  • 211043 12/12/10 01:29  Pitt           Region 2 HDC leakage currents and Fast OR rates versus voltage with beam on

  • 211042 12/12/10 01:29  cdaq           End of Run 8107: 

  • 211041 12/12/10 01:24  cdaq           Run 8107: r2 tracking on lh2

  • 211040 12/12/10 01:15  Pitt           Region 2 HDC leakage rates at operating voltages

  • 211039 12/12/10 01:13  cdaq           End of Run 8106: 

  • 211038 12/12/10 01:13  Pitt           Adjust beam current to try to improve stability

  • 211037 12/12/10 01:13  L.Lee          Target: 4K Flow Rate suddenly dropped

  • 211036 12/12/10 01:13  cdaq           Run 8106: r2 tracking on lh2

  • 211035 12/12/10 00:57  cdaq           End of Run 8104: 

  • 211034 12/12/10 00:55  cdaq           Run 8104: daq test

  • 211033 12/12/10 00:45  mack           summary table to go with Rob's plots of BCM current-dependence runs from last nite

  • 211032 12/12/10 00:20  L.Lee          Screen shot of target at beginning of owl shift

  • 211031 12/12/10 00:19  Pitt           Remeasure the leakage beam

  • 211030 12/12/10 00:17  rob            Screenshots for shift checklist

  • 211029 12/12/10 00:09  leacock        Follow up: change of epics scaler map

  • 211028 12/12/10 00:08  Pitt           Target: End of shift screenshot

  • 211027 12/12/10 00:06  jwmartin       Shift Summary: Swing shift summary

  • 211026 12/12/10 00:00  Pitt           Count rates with beam on at ~ 1 nA

    • Saturday

  • 211025 12/11/10 23:55  Pitt           Slit open again - bleedthrough beam

  • 211024 12/11/10 23:53  Pitt           Count rates with slit closed

  • 211023 12/11/10 23:52  Pitt           Count rates with slit closed.

  • 211022 12/11/10 23:52  rob            ethane bottle is not on a scale

  • 211021 12/11/10 23:44  PItt           MCC sends us too much beam

  • 211020 12/11/10 23:39  Pitt           Target: Move to Hydrogen Target

  • 211019 12/11/10 23:34  Pitt           Turn on Region 2 Scintillators

  • 211018 12/11/10 23:33  cdaq           End of Run 8103: 

  • 211017 12/11/10 23:33  Pitt           IHA3H09B Superharp scan

  • 211016 12/11/10 23:25  Pitt           Superharp IHA3H09A scan

  • 211015 12/11/10 23:14  Pitt           Superharp IHA3H09B scans - lumis

  • 211014 12/11/10 23:13  Pitt           Superharp IHA3H07B - halos

  • 211013 12/11/10 23:06  W. Deconinck   Re: strange bug in root on cdaql1

  • 211012 12/11/10 22:56  jwmartin       better scheme for moving the beam around at low currents

  • 211011 12/11/10 22:53  Pitt           Superharp IHA3H07A scan - lumis

  • 211010 12/11/10 22:49  Pitt           Superharp IHA3H07A scan at 1 nA

  • 211009 12/11/10 22:35  rob            Analysis: BCM plots for run 8082, nominal 175 uA

  • 211008 12/11/10 22:34  cdaq           Run 8103: superharp swipes 1nA

  • 211007 12/11/10 22:32  rob            Analysis: BCM plots for run 8082, nominal 170 uA

  • 211006 12/11/10 22:32  jwmartin       Beam: Corrector magnet settings for beam position studies

  • 211005 12/11/10 22:28  rob            Analysis: BCM plots for run 8082, nominal 160 uA

  • 211004 12/11/10 22:25  rob            Analysis: BCM plots for run 8082, nominal 150 uA

  • 211003 12/11/10 22:22  rob            Analysis: BCM plots for run 8082, nominal 140 uA

  • 211002 12/11/10 22:17  rob            Analysis: BCM plots for run 8082, nominal 120 uA

  • 211001 12/11/10 22:14  Pitt           Event mode lumi voltages for low current running

  • 211000 12/11/10 22:13  rob            Analysis: BCM plots for run 8082, nominal 100 uA

  • 210999 12/11/10 22:12  Pitt           Halo voltages for low current running

  • 210998 12/11/10 22:05  Pitt           Default halo voltages before changes

  • 210997 12/11/10 22:04  Pitt           Asked for 1 nA of beam

  • 210996 12/11/10 21:51  Pitt           Beam positions at "nominal" corrector settings for golden orbit

  • 210995 12/11/10 21:49  Pitt           Beam positions for "1 mm up"

  • 210994 12/11/10 21:48  Pitt           Beam positions for "1 mm up"

  • 210993 12/11/10 21:47  Pitt           Beam positions for "-1 mm down"

  • 210992 12/11/10 21:43  Pitt           Beam positions for "1 mm to the left"

  • 210991 12/11/10 21:35  rob            BCM plots for run 8082

  • 210990 12/11/10 21:35  Pitt           Beam positions for "1 mm to the right"

  • 210989 12/11/10 21:29  Pitt           Back to golden positions with slow orbit lock on

  • 210988 12/11/10 21:24  rob            BCM plots for run 8081

  • 210987 12/11/10 21:19  Pitt           Beam positions after "setting back to golden"  with no orbit lock

  • 210986 12/11/10 21:10  Pitt           Beam positions for "+1 mm in y"

  • 210985 12/11/10 21:06  Pitt           Beam positions for "-1 mm in y"

  • 210984 12/11/10 21:02  Pitt           Beam positions for "-1 mm to the left"

  • 210983 12/11/10 20:57  rob            BCM plots for run 8100

  • 210982 12/11/10 20:54  rob            BCM plots for run 8097

  • 210981 12/11/10 20:52  rob            BCM plots for run 8096

  • 210980 12/11/10 20:50  Pitt           IHA3H07B superharp scan, beam shifted 1 mm to right

  • 210979 12/11/10 20:49  rob            BCM plots for run 8095

  • 210978 12/11/10 20:49  cdaq           End of Run 8102: 

  • 210977 12/11/10 20:44  rob            BCM plots for run 8094

  • 210976 12/11/10 20:42  Pitt           Superharp IHA3H07A, beam shifted 1 mm to the right

  • 210975 12/11/10 20:27  mack           BCM1,2electronics  test with signal generator: encouraging yet perplexing result

  • 210974 12/11/10 20:21  cdaq           Run 8102: harp swipes

  • 210973 12/11/10 20:20  Pitt           Beam positions after shifting to beam right by 1 mm

  • 210972 12/11/10 20:17  rob            BCM plots for run 8093

  • 210971 12/11/10 20:13  rob            BCM plots for run 8092

  • 210970 12/11/10 20:06  benesch        3H07A harp trace

  • 210969 12/11/10 20:00  Pitt           Superhap scan IHA3H07B at 3 uA

  • 210968 12/11/10 19:59  cdaq           End of Run 8101: 

  • 210967 12/11/10 19:50  Pitt           Superharp IHA3H07A scan at 3 uA

  • 210966 12/11/10 19:30  cdaq           Run 8101: harp swipes 

  • 210965 12/11/10 19:24  Pitt           Beam positions before superharp scans

  • 210964 12/11/10 19:15  rob            strange bug in root on cdaql1

  • 210963 12/11/10 19:14  rob            strange bug in root on cdaql1

  • 210962 12/11/10 19:04  cdaq           Beam Time Accounting

  • 210961 12/11/10 18:56  cdaq           End of Run 8100: 

  • 210960 12/11/10 18:54  cdaq           Run 8100: dave's bcm test -- signal generator inputs split to bcm1 and bcm2

  • 210959 12/11/10 18:51  Pitt           Epics Scaler configuration for Region 2 Scintillators

  • 210958 12/11/10 18:42  cdaq           End of Run 8097: 

  • 210957 12/11/10 18:34  cdaq           Run 8097: dave's bcm test -- signal generator inputs split to bcm1 and bcm2

  • 210956 12/11/10 18:33  smithg         15K supply temp at esr dropping again

  • 210955 12/11/10 18:31  cdaq           End of Run 8096: 

  • 210954 12/11/10 18:27  cdaq           Run 8096: dave's bcm test -- signal generator inputs split to bcm1 and bcm2

  • 210953 12/11/10 18:20  cdaq           End of Run 8095: 

  • 210952 12/11/10 18:18  cdaq           Run 8095: dave's bcm test -- signal generator inputs split to bcm1 and bcm2

  • 210951 12/11/10 18:16  cdaq           End of Run 8094: 

  • 210950 12/11/10 18:09  cdaq           Run 8094: dave's bcm test -- signal generator inputs split to bcm1 and bcm2

  • 210949 12/11/10 17:53  cdaq           End of Run 8093: 

  • 210948 12/11/10 17:50  cdaq           Run 8093: dave's bcm test -- signal generator inputs split to bcm1 and bcm2

  • 210947 12/11/10 17:43  cdaq           End of Run 8092: 

  • 210946 12/11/10 17:42  cdaq           Run 8092: dave's bcm test -- signal generator inputs split to bcm1 and bcm2

  • 210945 12/11/10 17:40  cdaq           End of Run 8091: 

  • 210944 12/11/10 17:40  cdaq           Run 8091: junk

  • 210943 12/11/10 17:39  Pitt           Region 2 HDCs leakage currents and rates with beam off

  • 210942 12/11/10 17:20  leacock        Follow up: wire hits plot for 8090

  • 210941 12/11/10 17:06  Pitt           Region 2 HDC conditions during beam off run 8090

  • 210940 12/11/10 17:01  smithg         QTOR update: no go

  • 210939 12/11/10 17:00  cdaq           End of Run 8090: 

  • 210938 12/11/10 16:59  cdaq           Run 8090: region 2 daq test

  • 210937 12/11/10 16:38  leacock        epics scaler rates for tonight's run

  • 210936 12/11/10 16:34  leacock        uslumi1 linear sum was in halo scaler channel 13 for last night's runs

  • 210935 12/11/10 16:13  jwmartin       brief accesses for scanner control box tests

  • 210934 12/11/10 15:25  PItt           Access: Work on Region 2

  • 210933 12/11/10 15:16  Jiawei         General Tools and HV GUI screenshots

  • 210932 12/11/10 15:09  Kowalski       Shift Summary: Shift summary

  • 210931 12/11/10 13:07  Adesh          Target: Status 

  • 210930 12/11/10 13:07  gaskell        Moller results for large charge asymmetry runs

  • 210929 12/11/10 10:34  narayan        Compton: e-detector moved in to garage again

  • 210928 12/11/10 08:15  narayan        Compton: raised current to 100 uA

  • 210927 12/11/10 08:06  cdaq           Beam Time Accounting

  • 210926 12/11/10 08:06  narayan        Compton: e-detector being moved out of garage

  • 210925 12/11/10 08:02  seva           owl shift summary

  • 210923 12/11/10 08:00  seva           owl shift summary

  • 210922 12/11/10 07:45  L.Lee          Target: End of shift Screenshot of Target status

  • 210921 12/11/10 07:10  narayan        Compton: beam set through chicane

  • 210920 12/11/10 06:55  seva           MCC still working on getting beam through chicane

  • 210919 12/11/10 06:31  L.Lee          ESR 15K Supply Temperature slowly dropping 

  • 210918 12/11/10 06:21  cdaq           Compton Run 20451: Large charge asymmtry run;140 uA;HV off; pocket cell HV 41373/43026; charge feedback ON

  • 210917 12/11/10 05:38  narayan        Compton

  • 210916 12/11/10 04:42  seva           Large charge asymmetry part done; Amrendra will now work on the Compton e-detector

  • 210915 12/11/10 04:41  seva           Large charge asymmetry run summary

  • 210914 12/11/10 04:41  cdaq           End of Run 8089: 

  • 210913 12/11/10 04:40  cdaq           Moller End of Run 644: 

  • 210912 12/11/10 04:40  seva           parity controls screen shot with charge feedback ON

  • 210911 12/11/10 04:38  L.Lee          Target: ESR 15K Supply Temperature starting to Oscillate

  • 210910 12/11/10 04:33  cdaq           Compton Run 20450: Large charge asymmtry run;140 uA;HV off; pocket cell HV 41373/43026; charge feedback ON

  • 210909 12/11/10 04:29  cdaq           Run 8089: large charge asymmetry; 140 uA; pocket cell HV 41373/43026; charge feedback ON

  • 210908 12/11/10 04:29  cdaq           Moller Run 644: Large Asymmetry Run:

  • 210907 12/11/10 04:28  cdaq           Compton End of Run 20449: 

  • 210906 12/11/10 04:26  cdaq           End of Run 8088: 

  • 210905 12/11/10 04:25  cdaq           Moller End of Run 643: 

  • 210904 12/11/10 04:14  cdaq           Compton Run 20449: Large charge asymmtry run;140 uA;HV off; pocket cell HV 41373/43026

  • 210903 12/11/10 04:13  cdaq           Moller Run 643: Large Asymmetry Run:

  • 210902 12/11/10 04:13  cdaq           Run 8088: large charge asymmetry; 140 uA; pocket cell HV 41373/43026

  • 210901 12/11/10 04:11  seva           parity controls screenshot: back to baseline values

  • 210900 12/11/10 04:09  cdaq           End of Run 8087: 

  • 210899 12/11/10 04:09  cdaq           Compton End of Run 20448: 

  • 210898 12/11/10 04:08  cdaq           Moller End of Run 642: 

  • 210897 12/11/10 03:58  cdaq           Compton Run 20448: Large charge asymmtry run; 140 uA;HV off; pocket cell HV 38633&45766

  • 210896 12/11/10 03:57  cdaq           Moller Run 642: Large Asymmetry Run:

  • 210895 12/11/10 03:56  cdaq           Run 8087: large charge asymmetry; 140 uA; pocket cell HV 38633/45766

  • 210894 12/11/10 03:55  cdaq           Compton End of Run 20447: 

  • 210893 12/11/10 03:55  cdaq           End of Run 8086: 

  • 210892 12/11/10 03:55  seva           parity controls screenshot

  • 210891 12/11/10 03:52  seva           beam currents used in bcm calibration run

  • 210890 12/11/10 03:51  cdaq           Moller End of Run 641: 

  • 210889 12/11/10 03:42  seva           current setting were

  • 210888 12/11/10 03:39  cdaq           Run 8086: large charge asymmetry; 140 uA; pocket cell HV 44113;40286

  • 210887 12/11/10 03:38  cdaq           Moller Run 641: Large Asymmetry Run:

  • 210886 12/11/10 03:38  cdaq           Compton Run 20447: Large charge asymmtry baseline run; 140 uA;HV off; pocket cell HV 44113&40286

  • 210885 12/11/10 03:36  cdaq           Compton End of Run 20446: 

  • 210884 12/11/10 03:36  cdaq           End of Run 8085: 

  • 210883 12/11/10 03:36  seva           large asymmetry: pocket cell hv +2740;-2740

  • 210882 12/11/10 03:32  cdaq           Moller End of Run 640: 

  • 210881 12/11/10 03:20  cdaq           Compton Run 20446: Large charge asymmtry baseline run; 140 uA;; HV off; pocket cell HV 41373&43026

  • 210880 12/11/10 03:18  cdaq           Run 8085: large charge asymmetry baseline run; 140 {uA;} pocket cell HV {41373;43026}

  • 210879 12/11/10 03:18  cdaq           Moller Run 640: Large Asymmetry Run:

  • 210878 12/11/10 03:17  cdaq           End of Run 8084: 

  • 210877 12/11/10 03:09  cdaq           Compton End of Run 20445: 

  • 210876 12/11/10 03:09  cdaq           Run 8084: large charge asymmetry baseline {run;} 140 uA; pocket cell HV 41373;43026

  • 210875 12/11/10 03:06  cdaq           End of Run 8083: 

  • 210874 12/11/10 03:04  seva           baseline asymmetry pocket cell HV

  • 210873 12/11/10 02:44  seva           qwfeedback errors

  • 210872 12/11/10 02:14  seva           screenshot: baseline Hall Parity Controls

  • 210871 12/11/10 02:08  cdaq           Compton Run 20445: Large charge asymmtry baseline run; 140 uA; HV off

  • 210870 12/11/10 02:08  cdaq           Run 8083: large charge asymmetry baseline run; 140 uA

  • 210869 12/11/10 02:05  seva           starting Large charge asymmetry runs; warned Hall A; 140uA

  • 210868 12/11/10 02:04  seva           screenshot General Tools

  • 210867 12/11/10 02:02  cdaq           End of Run 8082: 

  • 210866 12/11/10 00:54  seva           screenshot General Tools&HV

  • 210865 12/11/10 00:49  seva           started BCM Current dependence studies; asked 100uA

  • 210864 12/11/10 00:46  cdaq           Run 8082: BCM study, current dependence studies

  • 210863 12/11/10 00:42  cdaq           End of Run 8081: 

  • 210862 12/11/10 00:41  seva           BCM gain setting set at 2

  • 210861 12/11/10 00:30  mack/paschke   Scope traces of BCM1,2 outputs at roughly 14 kHz bandwidth

  • 210860 12/11/10 00:29  seva           doing current baseline noise measurement  of BCM 

  • 210859 12/11/10 00:23  seva           MPS to accelerator

  • 210858 12/11/10 00:23  pking          Updating QwAnalysis/devel to revision 2316 on cdaq account

  • 210857 12/11/10 00:22  cdaq           Run 8081: BCM study, 20 uA baseline run

  • 210856 12/11/10 00:21  cdaq           End of Run 8080: 

  • 210855 12/11/10 00:20  cdaq           Beam Time Accounting

  • 210854 12/11/10 00:16  jwmartin       Shift Summary: Swing Shift Summary

  • 210853 12/11/10 00:16  seva           current settings

  • 210852 12/11/10 00:14  L.Lee          Target: Target moved to HOME=Out-of-Beam position

  • 210851 12/11/10 00:14  magee          Lumi voltage scan studies

    • Friday

  • 210850 12/10/10 23:59  L.Lee          Target: Start of shift Target Screenshots & Status

  • 210849 12/10/10 23:44  Pitt           Target: End of shift Screenshot

  • 210848 12/10/10 23:23  cdaq           Run 8080: lumi hv beam on 1nA scan

  • 210847 12/10/10 23:22  cdaq           End of Run 8079: 

  • 210846 12/10/10 23:04  cdaq           Run 8079: lumi hv beam off scan

  • 210845 12/10/10 22:36  jhlee          This is what I said

  • 210844 12/10/10 22:30  Pitt           Turned on Halo 3 and 4

  • 210843 12/10/10 22:21  magee          Snapshots for the hclog

  • 210842 12/10/10 22:10  cdaq           End of Run 8078: 

  • 210841 12/10/10 22:04  cdaq           Run 8078: modified BCM2 = 18 kOhm, BCM1 = 18 kOhm

  • 210840 12/10/10 21:56  cdaq           End of Run 8077: 

  • 210839 12/10/10 21:50  cdaq           Run 8077: modified BCM2 - 18 kOhm

  • 210838 12/10/10 21:41  cdaq           End of Run 8076: 

  • 210837 12/10/10 21:35  cdaq           Run 8076: modified BCM2 - zero Ohm

  • 210836 12/10/10 21:29  cdaq           Run 8075: Modified BCM 2 run - zero Ohm

  • 210835 12/10/10 21:03  leacock        epics variable map for lumis

  • 210834 12/10/10 20:36  Pitt/Leacock   Region 2 F1TDC; incorrectly connected cable

  • 210833 12/10/10 20:30  Pitt/Leacock   Region 2 and Lumi prep work - late entry

  • 210832 12/10/10 20:09  jwmartin       BCM5 - bandwidth reduced

  • 210831 12/10/10 20:04  Pitt           Target: More on 15 K JT valve manipulations

  • 210830 12/10/10 20:02  jwmartin       BCM5 - could not get the green light

  • 210829 12/10/10 19:51  benesch        thermal grease

  • 210828 12/10/10 19:33  cdaq           End of Run 8074: 

  • 210827 12/10/10 19:31  J.W. Martin    raster map of tungsten plug

  • 210826 12/10/10 19:28  cdaq           Run 8074: raster map of tungsten plug

  • 210825 12/10/10 19:27  magee          Raster map of W plug

  • 210824 12/10/10 19:26  smithg         QTOR update: looking promising for tomorrow

  • 210823 12/10/10 19:19  mack           BCM1,2 work this afternoon

  • 210822 12/10/10 17:42  cdaq           Beam Time Accounting

  • 210821 12/10/10 17:23  Pitt           Target: Increase in 15 K supply temp

  • 210820 12/10/10 17:15  jhlee          update F1TDC status (Dec 10, 2010)

  • 210819 12/10/10 17:06  gaskell        BPM positions after Moller shielding work

  • 210818 12/10/10 17:05  cdaq           End of Run 8073: 

  • 210817 12/10/10 17:04  cdaq           Run 8073: Tracking DAQ test

  • 210816 12/10/10 17:01  cdaq           End of Run 8072: 

  • 210815 12/10/10 17:00  cdaq           Run 8072: Tracking DAQ test

  • 210814 12/10/10 16:52  cdaq           End of Run 8071: 

  • 210813 12/10/10 16:49  cdaq           Run 8071: Tracking DAQ test

  • 210812 12/10/10 16:45  rob            Target: over-closed the 4K JT and temporarily blocked 4K flow; restored

  • 210811 12/10/10 16:27  saw            New EPICS variables and vmec15 reboot

  • 210810 12/10/10 16:00  gaskell        Moller shielding work

  • 210809 12/10/10 15:46  rob            Target: glitch alarm on QWT_4Ki

  • 210808 12/10/10 15:46  Kowalski       Shift Summary: Shift summary

  • 210807 12/10/10 15:38  rob            Target: target heater at 2300W

  • 210806 12/10/10 15:07  kamyers        HV and General Tolls screen shots for day shift checklist

  • 210805 12/10/10 14:57  rob            Target: backed out of parking the target, going to 2300 W

  • 210804 12/10/10 14:23  rob            Target: beginning target parking procedure

  • 210803 12/10/10 14:14  rob            Target: alarm on transient temperature spike on QWT_4Ko

  • 210802 12/10/10 13:58  rob            Target: alarm on transient temperature spike on solid target ladder.

  • 210801 12/10/10 13:01  mack           BCM1,2 time constants: close only counts in a game of grenades

  • 210800 12/10/10 12:01  rob            Target: un-parking procedure complete.  power 2000 W

  • 210799 12/10/10 11:57  pking          BCM5/6 gain values for different current ranges

  • 210798 12/10/10 11:34  smithg         QTOR SCRs are here

  • 210797 12/10/10 11:32  rob            Target: un-parking procedure complete.  power 2000 W

  • 210796 12/10/10 11:17  cdaq           Run 100003: FF/FFB Beam Modulation Response Program

  • 210795 12/10/10 10:33  jhlee          scanner controller baud rate is set to 9600

  • 210794 12/10/10 10:28  rob            Target: beginning target un-parking procedure

  • 210793 12/10/10 10:26  rob            scanner communication via portserver hctsv7

  • 210792 12/10/10 10:13  gaskell        Compton: Electron detector motion FSDS is active!

  • 210791 12/10/10 10:07  rob            scanner communicating from doghouse

  • 210790 12/10/10 09:38  cdaq           Moller End of Run 639: 

  • 210789 12/10/10 09:25  cdaq           Moller Run 639: DAQ checks

  • 210788 12/10/10 09:07  pking          Test plan for BCM checkout---version 1

  • 210787 12/10/10 08:23  rob            Target: screen shot at beginning of day shift

  • 210786 12/10/10 08:03  cdaq           Beam Time Accounting

  • 210785 12/10/10 07:55  jhoskins       Shift Summary

  • 210784 12/10/10 07:32  pking          BCM traces during the harp scans

  • 210783 12/10/10 07:12  jhoskins       Going to Restricted Access

  • 210782 12/10/10 04:49  jhoskins       MCC doing the harp scans.  Max current 10uA unrasterd though.

  • 210781 12/10/10 04:41  cdaq           End of Run 8070: 

  • 210780 12/10/10 04:25  cdaq           Run 8070: FF/FFB Beam Modulation Response Program

  • 210779 12/10/10 04:24  cdaq           End of Run 8069: 

  • 210778 12/10/10 04:12  cdaq           Run 8069: FF/FFB Beam Modulation Response Program

  • 210777 12/10/10 04:11  cdaq           End of Run 8068: 

  • 210776 12/10/10 04:03  cdaq           Beam Time Accounting

  • 210775 12/10/10 04:01  seva           Snapshots General Tools&HV

  • 210774 12/10/10 03:59  cdaq           Run 8068: FF/FFB Beam Modulation Response Program

  • 210773 12/10/10 03:45  cdaq           Run 8067: FF/FFB Beam Modulation Response Program

  • 210772 12/10/10 03:41  cdaq           End of Run 8066: 

  • 210771 12/10/10 03:34  cdaq           Run 8066: FF/FFB Beam Modulation Response Program

  • 210770 12/10/10 03:26  cdaq           End of Run 8065: 

  • 210769 12/10/10 03:05  cdaq           Run 8065: FF/FFB Beam Modulation Response Program

  • 210768 12/10/10 02:58  cdaq           End of Run 8064: 

  • 210767 12/10/10 02:47  cdaq           Run 8064: FF/FFB Beam Modulation Response Program

  • 210766 12/10/10 02:40  cdaq           End of Run 8063: 

  • 210765 12/10/10 02:27  cdaq           Run 8063: FF/FFB Beam Modulation Response Program

  • 210764 12/10/10 02:22  jhlee          a suggestion of  correlation plots

  • 210763 12/10/10 02:07  cdaq           End of Run 8059: 

  • 210762 12/10/10 01:55  cdaq           Run 8059: FF/FFB Beam Modulation Response Program

  • 210761 12/10/10 01:54  cdaq           End of Run 8058: 

  • 210760 12/10/10 01:43  cdaq           Run 8058: FF/FFB Beam Modulation Response Program

  • 210759 12/10/10 01:42  cdaq           End of Run 8057: 

  • 210758 12/10/10 01:29  cdaq           Run 8057: FF/FFB Beam Modulation Response Program

  • 210757 12/10/10 01:29  cdaq           End of Run 8056: 

  • 210756 12/10/10 01:17  cdaq           Run 8056: FF/FFB Beam Modulation Response Program

  • 210755 12/10/10 01:14  cdaq           End of Run 8055: 

  • 210754 12/10/10 01:03  cdaq           Run 8055: FF/FFB Beam Modulation Response Program

  • 210753 12/10/10 01:01  cdaq           End of Run 8054: 

  • 210752 12/10/10 00:49  cdaq           Run 8054: FF/FFB Beam Modulation Response Program

  • 210751 12/10/10 00:39  jhoskins       Starting second half of Modulation FFB/FF program

  • 210750 12/10/10 00:17  gaskell/raki   Moller: summary

  • 210749 12/10/10 00:16  gaskell/raki   Moller: summary

  • 210748 12/10/10 00:15  rob            Notes from today's fiddling with the scanner

  • 210747 12/10/10 00:12  L.Lee          Target: Screen shot of target at beginning of owl shift

  • 210746 12/10/10 00:12  gaskell        Moller backout

  • 210745 12/10/10 00:04  cdaq           Moller End of Run 638: 

  • 210744 12/10/10 00:01  cdaq           Moller Run 638: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210743 12/10/10 00:00  cdaq           Moller End of Run 637:

    • Thursday

  • 210742 12/09/10 23:57  cdaq           Moller Run 637: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210741 12/09/10 23:51  cdaq           Moller End of Run 636: 

  • 210740 12/09/10 23:37  cdaq           Moller Run 636: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210739 12/09/10 23:36  cdaq           Moller End of Run 635: 

  • 210738 12/09/10 23:28  buddhini       Correct plot for 8019 current > 130uA correlations between sub blocks.

  • 210737 12/09/10 23:26  buddhini       Analysis: bcm signal - correlations between all the blocks for run 8018 (140uA)

  • 210736 12/09/10 23:26  cdaq           Moller Run 635: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210735 12/09/10 23:26  cdaq           Moller End of Run 634: 

  • 210734 12/09/10 23:22  magee          Moller scaler coincidence/accidental width measurements

  • 210733 12/09/10 23:19  cdaq           Moller Run 634: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210732 12/09/10 23:17  Leckey         Swing Shift summary

  • 210731 12/09/10 22:55  cdaq           Moller End of Run 633: 

  • 210730 12/09/10 22:55  cdaq           Moller Run 633: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210729 12/09/10 22:17  cdaq           Moller End of Run 632: 

  • 210728 12/09/10 21:45  cdaq           Moller Run 632: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210727 12/09/10 21:41  cdaq           Moller End of Run 631: 

  • 210726 12/09/10 21:34  buddhini       Analysis: Correlations between bcm signals in block 0 to other 3 blocks in run 8018 (140uA)

  • 210725 12/09/10 21:21  cdaq           Moller Run 631: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210724 12/09/10 21:20  cdaq           Moller End of Run 630: 

  • 210723 12/09/10 21:09  cdaq           Moller Run 630: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210722 12/09/10 21:06  cdaq           Moller End of Run 629: 

  • 210721 12/09/10 20:43  cdaq           Moller Run 629: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210720 12/09/10 20:22  smithg         QTOR parts arrive tomorrow morning

  • 210719 12/09/10 19:21  mack           BCM1,2 filter change comment

  • 210718 12/09/10 19:16  cdaq           Moller End of Run 628: 

  • 210717 12/09/10 19:15  gaskell        Removed 50 db attenuation from BCM17 -replaced with 10

  • 210716 12/09/10 19:14  cdaq           Moller Run 628: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210715 12/09/10 19:13  mack           BCM1,2 output filter adjusted

  • 210714 12/09/10 19:06  cdaq           Moller End of Run 627: 

  • 210713 12/09/10 19:05  cdaq           Moller Run 627: Foil 3, 3.5 T. Q1=93.7A Q3=129.0A

  • 210712 12/09/10 18:56  gaskell        BCM 2 response has changed

  • 210711 12/09/10 18:52  gaskell        Moller setup

  • 210710 12/09/10 17:27  cdaq           Compton End of Run 20444: 

  • 210709 12/09/10 17:24  narayan        Compton: work accomplished during access

  • 210708 12/09/10 17:21  cdaq           Compton Run 20444: Pedestal run

  • 210707 12/09/10 17:11  gaskell        Moller: changed accidental timing

  • 210706 12/09/10 16:44  cdaq           Moller End of Run 626: 

  • 210705 12/09/10 16:42  cdaq           Moller Run 626: DAQ TEST

  • 210704 12/09/10 16:05  birchall       Target: Screen shot of target at beginning of swing shift

  • 210703 12/09/10 15:55  kamyers        HV gui and General Tools screen shots - day shift checklist

  • 210702 12/09/10 15:48  Jiawei         Shift Summary: Day Shift Summary

  • 210701 12/09/10 15:44  gaskell        Compton: photon detector signals

  • 210700 12/09/10 15:14  cdaq           Beam Time Accounting

  • 210699 12/09/10 13:14  kamyers        Analysis: Run 8018: BCM noise does not depend on pattern polarity

  • 210698 12/09/10 11:09  brads          Updated home page for cdaq firefoxes

  • 210697 12/09/10 11:03  kamyers        Analysis: Additional bcm asym and double difference plots for run 8019 - 50 uA

  • 210696 12/09/10 10:52  Jiawei         Arshark and Amrendra entered the hall for Compton work

  • 210695 12/09/10 10:47  Jiawei         Joe entered the hall for the QTOR work

  • 210694 12/09/10 10:32  smacewan       Target Screenshots

  • 210693 12/09/10 10:32  kamyers        Analysis: Additional bcm asym and double difference plots for run 8018 - 140 uA

  • 210692 12/09/10 10:01  Jiawei, John   RII measurements for beam pipe shielding

  • 210691 12/09/10 09:33  kamyers        Analysis: Beam on frame halo rate versus high voltage plots

  • 210690 12/09/10 08:41  jhoskins       Modulation Program [Short] Summary

  • 210689 12/09/10 08:18  jhoskins       Shift Summary

  • 210688 12/09/10 08:11  cdaq           Beam Time Accounting

  • 210687 12/09/10 08:07  cdaq           End of Run 8053: 

  • 210686 12/09/10 07:56  cdaq           Run 8053: FF/FFB Beam Modulation Response Program

  • 210685 12/09/10 07:53  cdaq           End of Run 8052: 

  • 210684 12/09/10 07:35  cdaq           Run 8052: FF/FFB Beam Modulation Response Program

  • 210683 12/09/10 07:33  cdaq           End of Run 8051: 

  • 210682 12/09/10 07:21  cdaq           Run 8051: FF/FFB Beam Modulation Response Program

  • 210681 12/09/10 07:17  cdaq           End of Run 8050: 

  • 210680 12/09/10 07:03  cdaq           Run 8050: FF/FFB Beam Modulation Response Program

  • 210679 12/09/10 06:58  cdaq           End of Run 8049: 

  • 210678 12/09/10 06:53  cdaq           Run 8049: FF/FFB Beam Modulation Response Program

  • 210677 12/09/10 06:35  seva           snapshots Genral Tools&HV

  • 210676 12/09/10 06:29  cdaq           End of Run 8048: 

  • 210675 12/09/10 06:27  cdaq           Run 8048: FF/FFB Beam Modulation Response Program[test for pair coil]

  • 210674 12/09/10 06:12  cdaq           End of Run 8047: 

  • 210673 12/09/10 05:53  cdaq           Run 8047: FF/FFB Beam Modulation Response Program

  • 210672 12/09/10 05:51  cdaq           End of Run 8046: 

  • 210671 12/09/10 05:37  cdaq           Run 8046: FF/FFB Beam Modulation Response Program

  • 210670 12/09/10 05:35  cdaq           End of Run 8045: 

  • 210669 12/09/10 05:20  cdaq           Run 8045: FF/FFB Beam Modulation Response Program

  • 210668 12/09/10 05:19  cdaq           End of Run 8044: 

  • 210667 12/09/10 05:07  cdaq           Run 8044: FF/FFB Beam Modulation Response Program

  • 210666 12/09/10 05:05  cdaq           End of Run 8043: 

  • 210665 12/09/10 04:54  cdaq           Run 8043: FF/FFB Beam Modulation Response Program

  • 210664 12/09/10 04:52  cdaq           End of Run 8042: 

  • 210663 12/09/10 04:42  cdaq           Run 8042: FF/FFB Beam Modulation Response Program

  • 210662 12/09/10 04:41  cdaq           End of Run 8041: 

  • 210661 12/09/10 04:28  cdaq           Run 8041: FF/FFB Beam Modulation Response Program

  • 210660 12/09/10 04:26  cdaq           End of Run 8040: 

  • 210659 12/09/10 04:16  cdaq           Run 8040: FF/FFB Beam Modulation Response Program

  • 210658 12/09/10 04:15  cdaq           End of Run 8039: 

  • 210657 12/09/10 04:05  cdaq           Run 8039: FF/FFB Beam Modulation Response Program

  • 210656 12/09/10 04:03  cdaq           End of Run 8038: 

  • 210655 12/09/10 03:53  cdaq           Run 8038: FF/FFB Beam Modulation Response Program

  • 210654 12/09/10 03:52  cdaq           End of Run 8037: 

  • 210653 12/09/10 03:33  cdaq           Run 8037: FF/FFB Beam Modulation Response Program

  • 210652 12/09/10 03:28  cdaq           End of Run 8036: 

  • 210651 12/09/10 03:16  cdaq           Run 8036: FF/FFB Beam Modulation Response Program

  • 210650 12/09/10 03:14  cdaq           End of Run 8035: 

  • 210649 12/09/10 03:01  cdaq           Run 8035: FF/FFB Beam Modulation Response Program

  • 210648 12/09/10 02:59  cdaq           End of Run 8034: 

  • 210647 12/09/10 02:47  cdaq           Run 8034: FF/FFB Beam Modulation Response Program

  • 210646 12/09/10 02:45  cdaq           End of Run 8033: 

  • 210645 12/09/10 02:33  cdaq           Run 8033: FF/FFB Beam Modulation Response Program

  • 210644 12/09/10 02:31  cdaq           End of Run 8032: 

  • 210643 12/09/10 02:20  cdaq           Run 8032: FF/FFB Beam Modulation Response Program

  • 210642 12/09/10 02:16  cdaq           End of Run 8031: 

  • 210641 12/09/10 02:05  cdaq           Run 8031: FF/FFB Beam Modulation Response Program

  • 210640 12/09/10 02:02  cdaq           End of Run 8030: 

  • 210639 12/09/10 01:52  cdaq           Run 8030: FF/FFB Beam Modulation Response Program

  • 210638 12/09/10 01:48  cdaq           End of Run 8028: 

  • 210637 12/09/10 01:46  seva           halo 3&4 turned on

  • 210636 12/09/10 01:35  cdaq           Run 8028: FF/FFB Beam Modulation Response Program

  • 210635 12/09/10 01:25  L.Lee          Target: Re: Alarm on transient Pump voltage reading 3 times in last 30 minutes

  • 210634 12/09/10 01:19  cdaq           End of Run 8027: 

  • 210633 12/09/10 01:18  cdaq           Run 8027: bmod response test

  • 210632 12/09/10 01:17  L.Lee          Target: Alarm on transient Pump voltage reading 3 times in last 30 minutes

  • 210631 12/09/10 01:14  Mack/Leckey    BCM1,2 time constants are now roughly consistent with BCM5 and DS Lumi

  • 210630 12/09/10 01:07  cdaq           End of Run 8026: 

  • 210629 12/09/10 01:06  cdaq           Run 8026: bmod response test

  • 210628 12/09/10 01:03  cdaq           Run 8025: bmod response test

  • 210627 12/09/10 01:01  cdaq           End of Run 8024: 

  • 210626 12/09/10 01:00  cdaq           Run 8024: bmod response test

  • 210625 12/09/10 01:00  cdaq           Beam Time Accounting

  • 210624 12/09/10 00:42  cdaq           End of Run 8023: 

  • 210623 12/09/10 00:40  cdaq           Run 8023: bmod response test

  • 210622 12/09/10 00:39  cdaq           End of Run 8022: 

  • 210621 12/09/10 00:37  cdaq           Run 8022: bmod response test

  • 210620 12/09/10 00:32  cdaq           End of Run 8021: 

  • 210619 12/09/10 00:30  cdaq           Run 8021: beam modulation response characterization run 1/3 nominal

  • 210618 12/09/10 00:12  jhlee          qweakl1 eth1 is permanently set up now

  • 210617 12/09/10 00:11  Nuruzzaman     Beam is out of compton chicane

  • 210616 12/09/10 00:09  L.Lee          Target: Start of shift Target Screenshots & Status

  • 210615 12/09/10 00:00  cdaq           Compton End of Run 20443:

    • Wednesday

  • 210614 12/08/10 23:58  cdaq           End of Run 8020: 

  • 210613 12/08/10 23:44  donjones       Compton: Compton program summary

  • 210612 12/08/10 23:41  Leckey         Swing Shift summary

  • 210611 12/08/10 23:34  cdaq           Compton Run 20443: 50 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 210610 12/08/10 23:30  cdaq           Run 8020: MD HV off

  • 210609 12/08/10 23:29  birchall       Target: Target moved out of beam

  • 210608 12/08/10 23:02  Arshak         Run 8019 BCM Noise for 50 uA

  • 210607 12/08/10 22:58  birchall       Target: Moved to DS 2% Al target

  • 210606 12/08/10 22:55  cdaq           End of Run 8019: 

  • 210605 12/08/10 22:30  cdaq           Compton Run 20442: 50 uA, 1600 V, laser toggling 30on/15off, accum ped/thresholds 3790/3740/3690

  • 210604 12/08/10 22:27  Arshak         the run # should be 8018.instead of 8014 

  • 210603 12/08/10 22:23  cdaq           Run 8019: MD HV off

  • 210602 12/08/10 22:16  cdaq           Compton Run 20441: 140 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 210601 12/08/10 22:15  Arshak         Qweak General tools and HVs

  • 210600 12/08/10 22:00  Arshak         Run 8014: BCM Noise for 140 uA.

  • 210599 12/08/10 21:16  cdaq           Compton End of Run 20440: 

  • 210598 12/08/10 21:05  cdaq           End of Run 8018: 

  • 210597 12/08/10 20:56  cdaq           Compton Run 20440: 140 uA, 1600 V, laser toggling 30on/15off, accum ped/thresholds 3790/3740/3690

  • 210596 12/08/10 20:52  cdaq           Compton End of Run 20439: 

  • 210595 12/08/10 20:17  cdaq           Compton Run 20439: 140 uA, 1600 V, laser toggling 30on/15off, accum ped/thresholds 3790/3740/3690

  • 210594 12/08/10 20:09  cdaq           Run 8018: BCM calibration 140uA

  • 210593 12/08/10 20:07  cdaq           End of Run 8017: 

  • 210592 12/08/10 20:06  cdaq           Run 8017: MD test NO HV

  • 210591 12/08/10 19:26  cdaq           Compton Run 20437: 100 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 210590 12/08/10 19:25  cdaq           Compton End of Run 20436: 

  • 210589 12/08/10 19:10  cdaq           End of Run 8016: 

  • 210588 12/08/10 19:02  mack           BCM1,2 filter change

  • 210587 12/08/10 17:58  cdaq           Compton Run 20436: 100 uA, 1600 V, vertical scan, accum ped/thresholds 3790/3740/3690

  • 210586 12/08/10 17:53  rob            Scanner status: promising

  • 210585 12/08/10 17:02  cdaq           Run 8016: DAQ test

  • 210584 12/08/10 17:01  cdaq           Compton End of Run 20435: 

  • 210583 12/08/10 17:00  cdaq           Compton Run 20435: DAQ test with trigger

  • 210582 12/08/10 17:00  cdaq           Compton End of Run 20434: 

  • 210581 12/08/10 16:59  jhlee          patch panel map between the panel at CH03B12 and the one at CH03C08

  • 210580 12/08/10 16:54  cdaq           Compton Run 20434: DAQ test with trigger

  • 210579 12/08/10 16:51  kamyers        HV and General Tools - day shift checklist

  • 210578 12/08/10 16:48  cdaq           Beam Time Accounting

  • 210577 12/08/10 16:47  jhlee          Lan configuration at the doghouse (v1.7)

  • 210576 12/08/10 16:46  cdaq           Run 8015: software test, beam OFF

  • 210575 12/08/10 16:22  gaskell        Compton: moved signal going to hcrate13 to hcrate14

  • 210574 12/08/10 16:11  birchall       Target: Target screen shot at beginning of swing shift

  • 210573 12/08/10 15:08  rob            found an intermittent failure in an ethernet-to-fiber transceiver

  • 210572 12/08/10 14:27  kamyers        Analysis: Run 8014: BCM Noise for 100 uA, 120 uA, 140 uA

  • 210571 12/08/10 14:23  donjones       Compton: Relocked laser in opposite helicity state.

  • 210570 12/08/10 14:18  donjones       Compton: changes to laser table config

  • 210569 12/08/10 14:06  jhlee          Lan configuration at the doghouse (v1.6)

  • 210568 12/08/10 12:47  smacewan       Target: ANother 4k flow excusion, along with slight increase in 4K supply and return temperature

  • 210567 12/08/10 11:20  smacewan       Target: 4K Flow Rate Increasing over past 12 hours, significant excursion just now

  • 210566 12/08/10 09:39  smithg         Tentative run plan for the next week

  • 210565 12/08/10 09:29  cdaq           Beam Time Accounting

  • 210564 12/08/10 08:48  smithg         Target: late entry: pump controller current limit raised

  • 210563 12/08/10 08:14  smacewan       Target: Target Start of Shift ScreenShots

  • 210562 12/08/10 08:12  jhoskins       Halo Target Test Open Office Calc File

  • 210561 12/08/10 08:03  cdaq           End of Run 8014: 

  • 210560 12/08/10 08:03  jhoskins       Shift Summary

  • 210559 12/08/10 07:51  cdaq           Beam Time Accounting

  • 210558 12/08/10 07:41  cdaq           Run 8014: BCM calibration 100uA

  • 210557 12/08/10 07:23  cdaq           End of Run 8013: 

  • 210556 12/08/10 06:46  seva           snapshots: HV&General Tools

  • 210555 12/08/10 05:50  cdaq           Run 8013: Halo Target prgoram part dos

  • 210554 12/08/10 05:35  cdaq           End of Run 8012: 

  • 210553 12/08/10 03:57  cdaq           Run 8012: Halo Target Program

  • 210552 12/08/10 03:28  cdaq           End of Run 8011: 

  • 210551 12/08/10 03:27  cdaq           Run 8011: beam modulation ADC readback {test[refineing} trigger timing\]

  • 210550 12/08/10 03:24  cdaq           End of Run 8010: 

  • 210549 12/08/10 03:22  cdaq           Run 8010: beam modulation ADC readback {test[refineing} trigger timing\]

  • 210548 12/08/10 03:19  cdaq           End of Run 8008: 

  • 210547 12/08/10 03:16  cdaq           Run 8008: beam modulation ADC readback {test[refineing} trigger timing\]

  • 210546 12/08/10 03:11  cdaq           Run 8007: beam modulation ADC readback {test[refineing} trigger timing\]

  • 210545 12/08/10 03:08  cdaq           End of Run 8005: 

  • 210544 12/08/10 03:06  cdaq           Run 8005: beam modulation ADC readback {test[refineing} trigger timing\]

  • 210543 12/08/10 03:02  cdaq           End of Run 8003: 

  • 210542 12/08/10 03:01  cdaq           Run 8003: beam modulation ADC readback {test[refineing} trigger timing\]

  • 210541 12/08/10 02:51  cdaq           End of Run 8002: 

  • 210540 12/08/10 02:50  cdaq           Run 8002: beam modulation ADC readback test[refineing trigger timing]

  • 210539 12/08/10 02:36  cdaq           End of Run 8001: 

  • 210538 12/08/10 02:34  cdaq           Run 8001: beam modulation ADC readback test[trigger time refinement]

  • 210537 12/08/10 02:33  cdaq           End of Run 8000: 

  • 210536 12/08/10 02:31  cdaq           Run 8000: beam modulation ADC readback test

  • 210535 12/08/10 02:19  cdaq           End of Run 7999: 

  • 210534 12/08/10 02:18  cdaq           Run 7999: beam modulation ADC readback test[wait time refining]

  • 210533 12/08/10 02:17  L.Lee          Target: Target GUI and strip charts screenshots

  • 210532 12/08/10 02:09  cdaq           End of Run 7998: 

  • 210531 12/08/10 02:07  cdaq           Run 7998: beam modulation ADC readback test[refining tests]

  • 210530 12/08/10 01:50  cdaq           End of Run 7997: 

  • 210529 12/08/10 01:49  cdaq           Run 7997: FIinal Showdown(part deux) :: beam modulation ADC readback test[more reasonable waittime]

  • 210528 12/08/10 01:32  cdaq           End of Run 7996: 

  • 210527 12/08/10 01:30  cdaq           Run 7996: beam modulation ADC readback test

  • 210526 12/08/10 01:29  cdaq           End of Run 7995: 

  • 210525 12/08/10 01:27  cdaq           Run 7995: beam modulation ADC readback test

  • 210524 12/08/10 01:25  cdaq           End of Run 7994: 

  • 210523 12/08/10 01:22  jhoskins       MCC :: Starting to pump down vacuum 

  • 210522 12/08/10 01:03  cdaq           Run 7994: beam modulation ADC readback test

  • 210521 12/08/10 00:58  cdaq           End of Run 7993: 

  • 210520 12/08/10 00:53  cdaq           Run 7993: beam modulation ADC readback test

  • 210519 12/08/10 00:15  W. Deconinck   Shift Summary: Shift summary: Nothing to report

  • 210518 12/08/10 00:12  cdaq           Beam Time Accounting

  • 210517 12/08/10 00:03  jhlee          RT engine, RT viewer, and qwfeedback tests are done

    • Tuesday

  • 210516 12/07/10 23:51  cdaq           Compton End of Run 20433: 

  • 210515 12/07/10 23:42  cdaq           Compton Run 20433: DAQ test with trigger

  • 210514 12/07/10 23:18  cdaq           Compton End of Run 20432: 

  • 210513 12/07/10 23:17  cdaq           Compton Run 20432: DAQ test

  • 210512 12/07/10 23:10  cdaq           Compton End of Run 20431: 

  • 210511 12/07/10 23:09  cdaq           Compton Run 20431: DAQ test

  • 210510 12/07/10 23:09  birchall       Target: Recovery following abrupt increase in 15K supply temperature

  • 210509 12/07/10 22:59  birchall       Target: Excursion in 15K coolant supply

  • 210508 12/07/10 22:57  cdaq           Compton End of Run 20430: 

  • 210507 12/07/10 22:57  cdaq           Compton Run 20430: DAQ test

  • 210506 12/07/10 22:30  donjones       Compton: changes to compton

  • 210505 12/07/10 22:17  cdaq           Compton End of Run 20429: 

  • 210504 12/07/10 22:16  cdaq           Compton Run 20429: DAQ test

  • 210503 12/07/10 22:09  cdaq           Compton End of Run 20428: 

  • 210502 12/07/10 22:08  cdaq           Compton Run 20428: DAQ test

  • 210501 12/07/10 22:06  cdaq           Compton End of Run 20427: 

  • 210500 12/07/10 22:06  cdaq           Compton Run 20427: DAQ test

  • 210499 12/07/10 21:59  W. Deconinck   Beam: No hurry, another 2 hours before vac is OK

  • 210498 12/07/10 21:51  cdaq           End of Run 7992: 

  • 210497 12/07/10 21:30  cdaq           Compton End of Run 20426: 

  • 210496 12/07/10 21:30  cdaq           Compton Run 20426: DAQ test

  • 210495 12/07/10 21:21  cdaq           Run 7992: DAQ testing, FAKE MPS 1kHz

  • 210494 12/07/10 21:18  cdaq           Compton End of Run 20425: 

  • 210493 12/07/10 21:18  cdaq           Compton Run 20425: DAQ test

  • 210492 12/07/10 21:04  cdaq           Run 7991: DAQ testing, FAKE MPS 1kHz

  • 210491 12/07/10 20:55  cdaq           Compton End of Run 20424: 

  • 210490 12/07/10 20:55  cdaq           Compton Run 20424: DAQ test

  • 210489 12/07/10 20:50  cdaq           Compton End of Run 20423: 

  • 210488 12/07/10 20:49  cdaq           Compton Run 20423: DAQ test

  • 210487 12/07/10 20:47  cdaq           End of Run 7990: 

  • 210486 12/07/10 20:43  cdaq           Compton End of Run 20422: 

  • 210485 12/07/10 20:42  cdaq           Compton Run 20422: DAQ test

  • 210484 12/07/10 20:17  cdaq           Run 7990: DAQ testing, FAKE MPS 1kHz

  • 210483 12/07/10 20:14  W. Deconinck   Compton: Updated analyzer to revision 2296 (does not affect Qweak)

  • 210482 12/07/10 20:08  cdaq           End of Run 7989: 

  • 210481 12/07/10 20:00  mack           BCM1,2 downconverter work today

  • 210480 12/07/10 19:44  pking          Run plan update for Tuesday Swing & Wednesday Owl

  • 210479 12/07/10 19:17  cdaq           Compton End of Run 20421: 

  • 210478 12/07/10 19:17  cdaq           Compton Run 20421: DAQ test

  • 210477 12/07/10 18:46  W. Deconinck   Beam: Asked for sweep and back to QRT helicity pattern

  • 210476 12/07/10 18:21  cdaq           Run 7989: DAQ testing, FAKE MPS 1kHz

  • 210475 12/07/10 17:35  rakithab       Analysis: Induced Charge Asymmetry Test Analysis

  • 210474 12/07/10 17:16  cdaq           Compton End of Run 20420: 

  • 210473 12/07/10 17:15  cdaq           Compton Run 20420: DAQ test

  • 210472 12/07/10 16:32  cdaq           End of Run 7988: 

  • 210471 12/07/10 16:16  birchall       Target: 4K coolant up and down at start of swing shift

  • 210470 12/07/10 16:04  cdaq           Beam Time Accounting

  • 210469 12/07/10 16:00  rakithab       Analysis: Induced Charge Asymmetry Test Summary.

  • 210468 12/07/10 15:48  cdaq           Beam Time Accounting

  • 210467 12/07/10 15:24  jhlee          now, boot files are symbolic links

  • 210466 12/07/10 15:23  Leckey         Day Shift summary

  • 210465 12/07/10 15:22  cdaq           Run 7988: DAQ testing, FAKE MPS 1kHz

  • 210464 12/07/10 15:10  cdaq           End of Run 7987: 

  • 210463 12/07/10 14:50  cdaq           Run 7987: DAQ testing, FAKE MPS 1kHz

  • 210462 12/07/10 14:49  cdaq           End of Run 7986: 

  • 210461 12/07/10 14:34  cdaq           Run 7986: DAQ testing

  • 210460 12/07/10 13:43  brads          testing cmdline hclog script

  • 210459 12/07/10 13:26  cdaq           Run 7985: DAQ testing

  • 210458 12/07/10 13:24  jhlee          ET, Realtime, and Qwfeedback are testing (no DAQ available)

  • 210457 12/07/10 12:16  leacock        uslumi1pos fixed and uslumis and dslumis in Current Mode

  • 210456 12/07/10 12:10  smacewan       Target Screenshot

  • 210455 12/07/10 11:25  cdaq           End of Run 7984: 

  • 210454 12/07/10 11:23  cdaq           Run 7984: Final Showdown test w/ modulation

  • 210453 12/07/10 11:20  cdaq           End of Run 7983: 

  • 210452 12/07/10 11:06  cdaq           Run 7983: testing bmod trigger

  • 210451 12/07/10 11:03  cdaq           End of Run 7982: 

  • 210450 12/07/10 11:00  cdaq           Run 7982: test of software

  • 210449 12/07/10 10:48  cdaq           End of Run 7981: 

  • 210448 12/07/10 10:39  cdaq           Run 7981: test o stuff

  • 210447 12/07/10 10:37  cdaq           End of Run 7979: 

  • 210446 12/07/10 10:32  cdaq           End of Run 7979: 

  • 210445 12/07/10 10:31  smacewan       Target: Cryo is finished their work. Target is stable

  • 210444 12/07/10 10:25  cdaq           Run 7979: bmod trigger test

  • 210443 12/07/10 10:15  cdaq           Run 7978: bmod trigger test

  • 210442 12/07/10 09:58  cdaq           End of Run 7977: 

  • 210441 12/07/10 09:45  cdaq           Run 7977: bmod software test

  • 210440 12/07/10 09:43  cdaq           End of Run 7976: 

  • 210439 12/07/10 09:30  pking          Hall techs have isolated the  VESDA in preparation for welding work in Moller region

  • 210438 12/07/10 09:14  smacewan       Target: Cryo called and suggsted we open our 4K JT a bit

  • 210437 12/07/10 09:01  cdaq           Run 7976: bmod software test

  • 210436 12/07/10 08:49  Leckey         Hall in Restricted Access

  • 210435 12/07/10 08:09  narayan        Compton: e-detector study

  • 210434 12/07/10 08:04  smacewan       Target: Start of shift Target Screenshots & Status

  • 210433 12/07/10 07:21  D. Dutta       Owl Shift summary

  • 210432 12/07/10 07:06  narayan        Target: pump trip: fixed

  • 210431 12/07/10 07:01  cdaq           End of Run 7975: 

  • 210430 12/07/10 06:30  cdaq           Run 7975: Charge asymmetry test (target out): 140 uA, FR 4x4, charge feedback back on

  • 210429 12/07/10 06:29  cdaq           End of Run 7974: 

  • 210428 12/07/10 06:28  pqwang         snapshot - GeneralTools & HV GUI

  • 210427 12/07/10 05:24  cdaq           Run 7974: pedestal run, 100 uA, 4x4 raster

  • 210426 12/07/10 05:23  cdaq           End of Run 7973: 

  • 210425 12/07/10 05:13  cdaq           Run 7973: pedestal run, 100 uA, 4x4 raster

  • 210424 12/07/10 05:12  cdaq           End of Run 7972: 

  • 210423 12/07/10 04:38  narayan        Target: 4k coolant update

  • 210422 12/07/10 04:36  narayan        Target: halo rate IOC

  • 210421 12/07/10 03:59  narayan        Target: 4k coolant supply pressure went above HIHI limit 

  • 210420 12/07/10 03:25  cdaq           Run 7972: pedestal run, 100 uA, 4x4 raster

  • 210419 12/07/10 03:25  narayan        Target: 4k Coolant alarm

  • 210418 12/07/10 03:04  narayan        Target: pump speed on camera showing 18.00 +/- 0.01

  • 210417 12/07/10 00:16  cdaq           End of Run 7971: 

  • 210416 12/07/10 00:00  cdaq           Beam Time Accounting

  • 210415 12/07/10 00:00  mgericke       Shift Summary: Swing shift summary

    • Monday

  • 210414 12/06/10 23:59  V. Tvaskis     Target: Target GUI and strip charts screenshots

  • 210413 12/06/10 23:57  jpan           Run range summary for Run#7966 - Run#7971

  • 210412 12/06/10 23:48  jpan           BCM Asym.  - run#7970

  • 210411 12/06/10 23:35  cdaq           Run 7971: Charge asymmetry test (target out): 140 uA, FR 4x4, charge feedback back on

  • 210410 12/06/10 23:33  mgericke       Changing pockels cell voltages back to original voltages

  • 210409 12/06/10 23:31  cdaq           End of Run 7970: 

  • 210408 12/06/10 23:11  jpan           Snapshots of General Tools and CAEN HV GUI

  • 210407 12/06/10 23:06  cdaq           Run 7970: Large Positive Charge Asymmetry Test (target out): 140 uA, FR 4x4, charge feedback off

  • 210406 12/06/10 23:06  mgericke       Pockels cell voltage change

  • 210405 12/06/10 23:05  jpan           BCM Asym.  - run#7969

  • 210404 12/06/10 23:02  cdaq           End of Run 7969: 

  • 210403 12/06/10 22:54  jpan           BCM Asym. DD  - run#7968

  • 210402 12/06/10 22:51  mgericke       I guess run 7969 is actually a large negative charge asymmetry ...

  • 210401 12/06/10 22:46  jpan           BCM Asym. DD  - run#7967

  • 210400 12/06/10 22:41  cdaq           Run 7969: Large Positive Charge Asymmetry Test (target out): 140 uA, FR 4x4, charge feedback off

  • 210399 12/06/10 22:39  jpan           BCM Asym. DD  - run#7966

  • 210398 12/06/10 22:39  mgericke       Correction: Pockels cell voltage change

  • 210397 12/06/10 22:38  mgericke       Pockels cell voltage change

  • 210396 12/06/10 22:36  mgericke       Proceeding with large charge asymmetry tests.

  • 210395 12/06/10 22:31  mgericke       BCM investigation as outlined in run planned are completed

  • 210394 12/06/10 22:30  cdaq           End of Run 7968: 

  • 210393 12/06/10 22:27  jpan           Run summary for BCM studies - current scan

  • 210392 12/06/10 22:17  cdaq           Run 7968: BCM Studies Current Scan (target out): 140 uA, FR 4x4

  • 210391 12/06/10 22:16  mgericke       RF cables on the down converters switched back

  • 210390 12/06/10 22:15  cdaq           End of Run 7967: 

  • 210389 12/06/10 22:01  cdaq           Run 7967: BCM Studies Current Scan (target out): 140 uA, FR 4x4

  • 210388 12/06/10 22:00  mgericke       RF cables on the down converters switched

  • 210387 12/06/10 21:55  cdaq           End of Run 7966: 

  • 210386 12/06/10 21:37  mgericke       BCM Downconverter power cables plugged back in

  • 210385 12/06/10 21:37  cdaq           Run 7966: BCM Studies Current Scan (target out): 140 uA, FR 4x4

  • 210384 12/06/10 21:35  cdaq           End of Run 7965: 

  • 210383 12/06/10 21:29  jpan           BCM Asym. DD & yield - run#7965

  • 210382 12/06/10 21:21  mgericke       BCM Downconverter power cables unplugged

  • 210381 12/06/10 21:20  jpan           BCM Asym. DD & yield - run#7964

  • 210380 12/06/10 21:06  jpan           BCM Asym. DD & yield - Run#7963

  • 210379 12/06/10 20:56  jpan           BCM Asym. DD & yield - Run#7962

  • 210378 12/06/10 20:56  cdaq           Run 7965: BCM Studies Current Scan (target out): 20 uA, FR 4x4 (repeat from earlier current scan)

  • 210377 12/06/10 20:51  cdaq           End of Run 7964: 

  • 210376 12/06/10 20:45  cdaq           Run 7964: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 116

  • 210375 12/06/10 20:43  cdaq           End of Run 7963: 

  • 210374 12/06/10 20:35  cdaq           Run 7963: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 1

  • 210373 12/06/10 20:34  cdaq           End of Run 7962: 

  • 210372 12/06/10 20:29  jpan           BCM Asym. DD & yield - Run#7960

  • 210371 12/06/10 20:26  cdaq           Run 7962: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 2

  • 210370 12/06/10 20:25  cdaq           End of Run 7961: 

  • 210369 12/06/10 20:17  jpan           BCM Asym. DD & yield - Run#7959

  • 210368 12/06/10 20:16  cdaq           Run 7961: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 4

  • 210367 12/06/10 20:15  cdaq           End of Run 7960: 

  • 210366 12/06/10 20:08  cdaq           Run 7960: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 8

  • 210365 12/06/10 20:07  cdaq           End of Run 7959: 

  • 210364 12/06/10 20:05  jpan           BCM Asym. DD & yield - Run#7958

  • 210363 12/06/10 19:54  jpan           BCM Asym. DD & yield - Run#7957

  • 210362 12/06/10 19:46  cdaq           Run 7959: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 16

  • 210361 12/06/10 19:45  cdaq           End of Run 7958: 

  • 210360 12/06/10 19:42  jpan           BCM Asym. DD & yield - Run#7956

  • 210359 12/06/10 19:36  cdaq           Run 7958: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 32

  • 210358 12/06/10 19:32  leacock        compton photon detector HV off

  • 210357 12/06/10 19:30  jpan           No tree in the first100k_7954.root

  • 210356 12/06/10 19:29  jpan           BCM Asym. DD & yield - Run#7955

  • 210355 12/06/10 19:27  cdaq           End of Run 7957: 

  • 210354 12/06/10 19:22  cdaq           Run 7957: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 29

  • 210353 12/06/10 19:21  cdaq           End of Run 7956: 

  • 210352 12/06/10 19:15  cdaq           Run 7956: BCM Studies Current Scan (target out): 140 uA, FR 4x4, vqwksamples = 58

  • 210351 12/06/10 19:12  cdaq           End of Run 7955: 

  • 210350 12/06/10 19:07  cdaq           Run 7955: BCM Studies Current Scan (target out): 140 uA, FR 4x4

  • 210349 12/06/10 19:06  jpan           BCM Asym. DD & yield - Run#7953

  • 210348 12/06/10 18:57  cdaq           End of Run 7954: 

  • 210347 12/06/10 18:57  jpan           BCM Asym. & DD - Run#7952

  • 210346 12/06/10 18:50  cdaq           Run 7954: BCM Studies Current Scan (target out): 20 uA, FR 4x4

  • 210345 12/06/10 18:49  cdaq           End of Run 7953: 

  • 210344 12/06/10 18:47  jpan           BCM Asym. DD & yield - Run#7951

  • 210343 12/06/10 18:40  jpan           BCM Asym. DD & yield - Run#7950

  • 210342 12/06/10 18:37  cdaq           Run 7953: BCM Studies Current Scan (target out): 120 uA, FR 4x4

  • 210341 12/06/10 18:35  cdaq           End of Run 7952: 

  • 210340 12/06/10 18:31  jpan           Oops, here are the plots for run#7848

  • 210339 12/06/10 18:30  cdaq           Run 7952: BCM Studies Current Scan (target out): 100 uA, FR 4x4

  • 210338 12/06/10 18:27  cdaq           End of Run 7951: 

  • 210337 12/06/10 18:21  jpan           BCM Asym. & DD - Run#7949

  • 210336 12/06/10 18:17  cdaq           Run 7951: BCM Studies Current Scan (target out): 155 uA, FR 4x4

  • 210335 12/06/10 18:16  cdaq           End of Run 7950: 

  • 210334 12/06/10 18:10  jpan           BCM plots for Run#7948

  • 210333 12/06/10 18:10  cdaq           Run 7950: BCM Studies Current Scan (target out): 150 uA, FR 4x4

  • 210332 12/06/10 18:08  cdaq           End of Run 7949: 

  • 210331 12/06/10 17:59  cdaq           Run 7949: BCM Studies Current Scan (target out): 140 uA, FR 4x4

  • 210330 12/06/10 17:58  cdaq           End of Run 7948: 

  • 210329 12/06/10 17:57  jpan           Both Run7946 and Run7947 are junk runs - with wrong setting for bcm5

  • 210328 12/06/10 17:57  gaskell        Moller rate depdendence studies

  • 210327 12/06/10 17:52  cdaq           Run 7948: BCM Studies Current Scan (target out): 145 uA, FR 4x4

  • 210326 12/06/10 17:48  cdaq           End of Run 7947: 

  • 210325 12/06/10 17:43  cdaq           Run 7947: BCM Studies Current Scan (target out): 145 uA, FR 4x4

  • 210324 12/06/10 17:41  cdaq           End of Run 7946: 

  • 210323 12/06/10 17:30  cdaq           Run 7946: BCM Studies Current Scan (target out): 140 uA, FR 4x4

  • 210322 12/06/10 17:17  gaskell/raki   Moller tune test summary

  • 210321 12/06/10 16:59  gaskell/raki   Moller backout

  • 210320 12/06/10 16:40  cdaq           Moller End of Run 625: 

  • 210319 12/06/10 16:34  cdaq           Moller Run 625: Tune test. Q1=93.7A Q3=129.0A

  • 210318 12/06/10 16:34  cdaq           Moller End of Run 624: 

  • 210317 12/06/10 16:29  cdaq           Moller Run 624: Tune test. Q1=93.7A Q3=129.0A

  • 210316 12/06/10 16:28  cdaq           Moller End of Run 623: 

  • 210315 12/06/10 16:25  cdaq           Moller Run 623: Tune test. Q1=93.7A Q3=129.0A

  • 210314 12/06/10 16:25  cdaq           Moller End of Run 622: 

  • 210313 12/06/10 16:20  cdaq           Moller Run 622: Tune test. Q1=93.7A Q3=129.0A

  • 210312 12/06/10 16:19  cdaq           Moller End of Run 621: 

  • 210311 12/06/10 16:13  cdaq           Moller Run 621: Tune test. Q1=93.7A Q3=129.0A

  • 210310 12/06/10 16:11  cdaq           Moller End of Run 620: 

  • 210309 12/06/10 16:07  cdaq           Moller Run 620: Tune test. Q1=93.7A Q3=129.0A

  • 210308 12/06/10 16:07  cdaq           Moller End of Run 619: 

  • 210307 12/06/10 16:03  rakithab       General Tools Screen shot

  • 210306 12/06/10 16:02  cdaq           Beam Time Accounting

  • 210305 12/06/10 16:01  cdaq           Moller Run 619: Tune test. Q1=93.7A Q3=129.0A

  • 210304 12/06/10 15:58  cdaq           Moller End of Run 618: 

  • 210303 12/06/10 15:55  cdaq           Moller Run 618: Tune test. Q1=93.7A Q3=129.0A

  • 210302 12/06/10 15:55  cdaq           Moller End of Run 617: 

  • 210301 12/06/10 15:51  cdaq           Moller Run 617: Tune test. Q1=93.7A Q3=129.0A

  • 210300 12/06/10 15:48  cdaq           Moller End of Run 616: 

  • 210299 12/06/10 15:40  cdaq           Moller Run 616: Tune test. Q1=93.7A Q3=129.0A

  • 210298 12/06/10 15:39  cdaq           Moller End of Run 615: 

  • 210297 12/06/10 15:31  Leckey         Day Shift summary

  • 210296 12/06/10 15:31  cdaq           Moller Run 615: Tune test. Q1=93.7A Q3=129.0A

  • 210295 12/06/10 15:30  cdaq           Moller End of Run 614: 

  • 210294 12/06/10 15:29  Pitt           Target GUI and strip charts screenshots

  • 210293 12/06/10 15:22  cdaq           Moller Run 614: Tune test. Q1=93.7A Q3=129.0A

  • 210292 12/06/10 15:19  cdaq           Moller End of Run 613: 

  • 210291 12/06/10 14:56  cdaq           Moller Run 613: Tune test. Q1=93.7A Q3=129.0A

  • 210290 12/06/10 14:55  cdaq           Moller End of Run 612: 

  • 210289 12/06/10 14:54  cdaq           Moller Run 612: Tune test. Q1=93.7A Q3=129.0A

  • 210288 12/06/10 14:39  cdaq           Moller End of Run 611: 

  • 210287 12/06/10 14:35  pking          Run plan update for early Monday Swing

  • 210286 12/06/10 14:31  cdaq           Moller Run 611: Tune test. Q1=87.7A Q3=124.0A

  • 210285 12/06/10 14:30  cdaq           Moller End of Run 610: 

  • 210284 12/06/10 14:22  cdaq           Moller Run 610: Tune test. Q1=87.7A Q3=124.0A

  • 210283 12/06/10 14:22  cdaq           Moller End of Run 609: 

  • 210282 12/06/10 14:13  cdaq           Moller Run 609: Tune test. Q1=87.7A Q3=124.0A

  • 210281 12/06/10 14:12  cdaq           Moller End of Run 608: 

  • 210280 12/06/10 14:02  cdaq           Moller Run 608: Tune test. Q1=87.7A Q3=124.0A

  • 210279 12/06/10 13:59  cdaq           Moller End of Run 607: 

  • 210278 12/06/10 13:55  cdaq           Moller Run 607: Tune test. Q1=87.7A Q3=124.0A

  • 210277 12/06/10 13:53  cdaq           Moller End of Run 606: 

  • 210276 12/06/10 13:44  cdaq           Moller Run 606: Tune test. Q1=87.7A Q3=124.0A

  • 210275 12/06/10 13:42  cdaq           Moller End of Run 605: 

  • 210274 12/06/10 13:42  cdaq           Moller Run 605: Tune test. Q1=87.7A Q3=124.0A TUNE RUN

  • 210273 12/06/10 13:40  cdaq           Moller End of Run 604: 

  • 210272 12/06/10 13:38  cdaq           Moller Run 604: Tune test. Q1=89.7A Q3=124.0A TUNE RUN

  • 210271 12/06/10 13:36  cdaq           Moller End of Run 603: 

  • 210270 12/06/10 13:33  cdaq           Moller Run 603: Tune test. Q1=91.7A Q3=124.0A TUNE RUN

  • 210269 12/06/10 13:28  cdaq           Moller End of Run 602: 

  • 210268 12/06/10 13:19  cdaq           Moller Run 602: Tune test. Q1=93.7A Q3=124.0A

  • 210267 12/06/10 13:18  cdaq           Moller End of Run 601: 

  • 210266 12/06/10 13:09  cdaq           Moller Run 601: Tune test. Q1=93.7A Q3=124.0A

  • 210265 12/06/10 13:09  cdaq           Moller End of Run 600: 

  • 210264 12/06/10 12:59  cdaq           Moller Run 600: Tune test. Q1=93.7A Q3=124.0A

  • 210263 12/06/10 12:59  cdaq           Moller End of Run 599: 

  • 210262 12/06/10 12:50  cdaq           Moller Run 599: Tune test. Q1=93.7A Q3=124.0A

  • 210261 12/06/10 12:47  cdaq           Moller End of Run 598: 

  • 210260 12/06/10 12:46  cdaq           Moller Run 598: Tune test. Q1=93.7A Q3=124.0A

  • 210259 12/06/10 12:40  cdaq           Moller End of Run 597: 

  • 210258 12/06/10 12:38  cdaq           Moller Run 597: Tune test. Q1=95.7A Q3=133.0A - laser off

  • 210257 12/06/10 12:36  cdaq           End of Run 7945: 

  • 210256 12/06/10 12:35  cdaq           Moller End of Run 596: 

  • 210255 12/06/10 12:24  cdaq           Moller Run 596: Tune test. Q1=95.7A Q3=133.0A

  • 210254 12/06/10 12:24  cdaq           Moller End of Run 595: 

  • 210253 12/06/10 12:23  narayan        Compton: e-dettector activity summary

  • 210252 12/06/10 12:15  cdaq           Moller Run 595: Tune test. Q1=95.7A Q3=133.0A

  • 210251 12/06/10 12:14  cdaq           Moller End of Run 594: 

  • 210250 12/06/10 12:09  cdaq           Run 7945: Charge feedback test

  • 210249 12/06/10 12:07  cdaq           Moller Run 594: Tune test. Q1=95.7A Q3=133.0A

  • 210248 12/06/10 12:05  cdaq           Moller End of Run 593: 

  • 210247 12/06/10 11:57  cdaq           Moller Run 593: Tune test. Q1=95.7A Q3=133.0A 

  • 210246 12/06/10 11:55  cdaq           Moller End of Run 592: 

  • 210245 12/06/10 11:55  cdaq           Moller Run 592: Tune test. Q1=95.7A Q3=133.0A TUNE RUN

  • 210244 12/06/10 11:54  cdaq           Moller End of Run 591: 

  • 210243 12/06/10 11:52  cdaq           Moller Run 591: Tune test. Q1=91.7A Q3=133.0A TUNE RUN

  • 210242 12/06/10 11:48  cdaq           Moller End of Run 590: 

  • 210241 12/06/10 11:48  cdaq           Moller Run 590: Tune test. Q1=93.7A Q3=133.0A TUNE RUN

  • 210240 12/06/10 11:46  cdaq           End of Run 7944: 

  • 210239 12/06/10 11:45  cdaq           Moller End of Run 589: 

  • 210238 12/06/10 11:43  cdaq           Run 7944: Charge feedback test

  • 210237 12/06/10 11:35  cdaq           Moller Run 589: Tune test. Q1=93.7A Q3=133.0A

  • 210236 12/06/10 11:34  cdaq           End of Run 7943: 

  • 210235 12/06/10 11:34  cdaq           Moller End of Run 588: 

  • 210234 12/06/10 11:33  cdaq           Moller Run 588: Tune test. Q1=93.7A Q3=133.0A

  • 210233 12/06/10 11:33  cdaq           Moller End of Run 587: 

  • 210232 12/06/10 11:31  cdaq           Moller Run 587: Tune test. Q1=93.7A Q3=133.0A

  • 210231 12/06/10 11:31  cdaq           Moller End of Run 586: 

  • 210230 12/06/10 11:23  cdaq           Moller Run 586: Tune test. Q1=93.7A Q3=133.0A

  • 210229 12/06/10 11:22  cdaq           Moller End of Run 585: 

  • 210228 12/06/10 11:22  cdaq           Run 7943: Charge feedback test

  • 210227 12/06/10 11:14  cdaq           Moller Run 585: Tune test. Q1=93.7A Q3=133.0A

  • 210226 12/06/10 11:10  cdaq           Moller End of Run 584: 

  • 210225 12/06/10 11:04  cdaq           Moller Run 584: Tune test. Q1=93.7A Q3=129.0A

  • 210224 12/06/10 11:01  cdaq           Moller End of Run 583: 

  • 210223 12/06/10 10:53  cdaq           Moller Run 583: Tune test. Q1=93.7A Q3=129.0A

  • 210222 12/06/10 10:53  cdaq           Moller End of Run 582: 

  • 210221 12/06/10 10:45  cdaq           Moller Run 582: Tune test. Q1=93.7A Q3=129.0A

  • 210220 12/06/10 10:44  cdaq           Moller End of Run 581: 

  • 210219 12/06/10 10:31  cdaq           Moller Run 581: Tune test. Q1=93.7A Q3=129.0A

  • 210218 12/06/10 10:25  cdaq           Moller End of Run 580: 

  • 210217 12/06/10 10:24  cdaq           Moller Run 580: Tune test. Q1=93.7A Q3=129.0A

  • 210216 12/06/10 10:20  cdaq           Moller End of Run 579: 

  • 210215 12/06/10 10:20  cdaq           Moller Run 579: Tune test. Q1=93.7A Q3=127.0A

  • 210214 12/06/10 09:43  gaskell        Setup for Moller

  • 210213 12/06/10 09:08  cdaq           End of Run 7941: 

  • 210212 12/06/10 08:43  cdaq           Run 7941: BCM monitoring

  • 210211 12/06/10 08:40  cdaq           End of Run 7940: 

  • 210210 12/06/10 08:35  cdaq           Moller End of Run 578: 

  • 210209 12/06/10 08:35  cdaq           Moller Run 578: DAQ test

  • 210208 12/06/10 08:31  cdaq           Moller Run 577: DAQ test

  • 210207 12/06/10 08:31  Pitt           Target: Target status at beginning of shift

  • 210206 12/06/10 08:27  Dutta          Owl shift summary

  • 210205 12/06/10 08:05  cdaq           Beam Time Accounting

  • 210204 12/06/10 08:00  pqwang         BCM monitoring plots, run7940

  • 210203 12/06/10 07:51  pqwang         BCM monitoring plot, run7937

  • 210202 12/06/10 07:30  cdaq           Run 7940: BCM monitoring

  • 210201 12/06/10 07:30  cdaq           End of Run 7939: 

  • 210200 12/06/10 06:33  cdaq           Run 7939: BCM monitoring

  • 210199 12/06/10 06:32  cdaq           End of Run 7938: 

  • 210198 12/06/10 04:51  pqwang         snapshot: GeneralTools & HV GUI

  • 210197 12/06/10 04:47  cdaq           Run 7938: BCM monitoring

  • 210196 12/06/10 04:39  cdaq           End of Run 7937: 

  • 210195 12/06/10 04:35  pqwang         BCM studies: pictures of BCM spectra

  • 210191 12/06/10 03:46  narayan        Target: mid-shift target screen-shot

  • 210190 12/06/10 03:43  pqwang         BCM spectrua

  • 210189 12/06/10 03:38  Dutta          coda issues

  • 210188 12/06/10 03:34  cdaq           Run 7937: BCM monitoring

  • 210187 12/06/10 02:48  pqwang         BCM studies

  • 210186 12/06/10 02:44  narayan        Compton: run-plan tonight

  • 210185 12/06/10 02:37  pking          Reconnected BCM5/6 V/F inputs; reset gains for 40 uA

  • 210184 12/06/10 02:34  cdaq           End of Run 7936: 

  • 210183 12/06/10 02:31  cdaq           Run 7936: BCM noise studies

  • 210182 12/06/10 02:27  pqwang         BCM studies, run7935

  • 210181 12/06/10 02:22  pqwang         BCM studies, run7934

  • 210180 12/06/10 02:20  cdaq           End of Run 7935: 

  • 210179 12/06/10 02:15  cdaq           Run 7935: BCM noise studies

  • 210178 12/06/10 02:12  cdaq           End of Run 7934: 

  • 210177 12/06/10 02:12  cdaq           Run 7934: BCM noise studies

  • 210176 12/06/10 02:02  pqwang         bcm studies, run7933

  • 210175 12/06/10 01:57  pqwang         BCM studies, run7932

  • 210174 12/06/10 01:51  cdaq           End of Run 7933: 

  • 210173 12/06/10 01:50  pqwang         BCM studies, run7931

  • 210172 12/06/10 01:48  cdaq           Run 7933: BCM noise studies

  • 210171 12/06/10 01:43  cdaq           End of Run 7932: 

  • 210170 12/06/10 01:43  pqwang         BCM studies, run7930

  • 210169 12/06/10 01:41  cdaq           Run 7932: BCM noise studies

  • 210168 12/06/10 01:40  cdaq           End of Run 7931: 

  • 210167 12/06/10 01:39  jhoskins       Amrendra has taken over target shift for Owl.

  • 210166 12/06/10 01:36  cdaq           Run 7931: BCM noise studies

  • 210165 12/06/10 01:33  cdaq           End of Run 7930: 

  • 210164 12/06/10 01:30  cdaq           Run 7930: BCM noise studies

  • 210163 12/06/10 01:25  cdaq           End of Run 7929: 

  • 210162 12/06/10 01:21  cdaq           Run 7929: BCM noise studies

  • 210161 12/06/10 01:20  cdaq           End of Run 7928: 

  • 210160 12/06/10 01:20  cdaq           Run 7928: BCM noise studies

  • 210159 12/06/10 01:00  pking          Changed BCM5 and BCM6 gains for 140 uA; disconnected V/F inputs for BCM5 and 6

  • 210158 12/06/10 00:16  cdaq           Beam Time Accounting

  • 210157 12/06/10 00:06  mgericke       Shift Summary: Swing Shift summary

  • 210156 12/06/10 00:00  V. Tvaskis     Target: Target GUI and strip charts screenshots

    • Sunday

  • 210155 12/05/10 23:21  jpan           Snapshots of General Tools and CAEN HV GUI

  • 210154 12/05/10 23:19  pking/mgeric   Gain settings changed for BCM5 and BCM6 for 10 uA, suggestions for other ranges

  • 210153 12/05/10 23:10  cdaq           Beam Time Accounting

  • 210152 12/05/10 22:37  Pitt           Access: Backed out R2 HDCs

  • 210151 12/05/10 22:08  jhlee          Comments on F1TDC Error Status

  • 210150 12/05/10 22:05  leacock        all HV off except halo 3,4

  • 210149 12/05/10 22:04  jhlee          Run #7924 : F1TDC error status

  • 210148 12/05/10 22:02  jhlee          Run #7923 : F1TDC error status

  • 210147 12/05/10 21:59  jhlee          Run #7919 : F1TDC error status

  • 210146 12/05/10 21:57  jhlee          Run #7918 : F1TDC error status

  • 210145 12/05/10 21:57  cdaq           End of Run 7927: 

  • 210144 12/05/10 21:57  Pitt           IHA3H07B Superharp scan at 1 nA

  • 210143 12/05/10 21:56  jhlee          Run #7917 : F1TDC error status

  • 210142 12/05/10 21:52  jhlee          Run #7916 : F1TDC error status

  • 210141 12/05/10 21:49  jhlee          Run #7915 : F1TDC error status

  • 210140 12/05/10 21:31  cdaq           Run 7927: Lumi Current Scan

  • 210139 12/05/10 21:26  cdaq           End of Run 7926: 

  • 210138 12/05/10 21:21  cdaq           Run 7926: Super harp scan

  • 210137 12/05/10 21:19  cdaq           End of Run 7925: 

  • 210136 12/05/10 21:12  Pitt           Region 2 HDCs off.

  • 210135 12/05/10 21:09  cdaq           Run 7925: RII HDC Tracking Run

  • 210134 12/05/10 21:07  cdaq           End of Run 7924: 

  • 210133 12/05/10 21:00  Pitt           Reboot ROC9 and 10 - then do run 7924

  • 210132 12/05/10 20:58  cdaq           Run 7924: RII HDC Tracking Run

  • 210131 12/05/10 20:49  cdaq           End of Run 7923: 

  • 210130 12/05/10 20:46  Pitt           Conditions for HDC run 7922/7923

  • 210129 12/05/10 20:44  cdaq           Run 7923: RII HDC Tracking Run

  • 210128 12/05/10 20:43  cdaq           End of Run 7922: 

  • 210127 12/05/10 20:39  cdaq           Run 7922: RII HDC Tracking Run

  • 210126 12/05/10 20:37  cdaq           End of Run 7921: 

  • 210125 12/05/10 20:33  Pitt           Hokie 4 oscillating

  • 210124 12/05/10 20:29  Pitt           Conditions for HDC run 7921

  • 210123 12/05/10 20:26  cdaq           Run 7921: RII HDC Tracking Run

  • 210122 12/05/10 20:19  cdaq           End of Run 7920: 

  • 210121 12/05/10 20:15  Pitt           Conditions for HDC run 7920

  • 210120 12/05/10 20:11  cdaq           Run 7920: RII HDC Tracking Run

  • 210119 12/05/10 20:10  cdaq           End of Run 7919: 

  • 210118 12/05/10 20:10  Pitt           Conditions for HDC run 7919

  • 210117 12/05/10 20:09  Pitt           Hokie 4 and 5 trip

  • 210116 12/05/10 20:01  cdaq           Run 7919: RII HDC Tracking Run

  • 210114 12/05/10 19:58  cdaq           End of Run 7918: 

  • 210113 12/05/10 19:54  Pitt           Conditions for HDC run 7918

  • 210111 12/05/10 19:48  cdaq           Run 7918: RII HDC Tracking Run

  • 210110 12/05/10 19:46  cdaq           End of Run 7917: 

  • 210109 12/05/10 19:39  Pitt           Conditions for HDC run 7917

  • 210108 12/05/10 19:37  cdaq           Run 7917: RII HDC Tracking Run

  • 210107 12/05/10 19:34  cdaq           End of Run 7916: 

  • 210106 12/05/10 19:29  Pitt           More conditions for run 7916

  • 210105 12/05/10 19:24  Pitt           HDC conditions for 7916

  • 210104 12/05/10 19:20  cdaq           Run 7916: RII HDC Tracking Run

  • 210103 12/05/10 19:08  cdaq           End of Run 7915: 

  • 210102 12/05/10 19:00  Pitt           HDC Leakage currents at data-taking voltages

  • 210101 12/05/10 18:58  cdaq           Run 7915: RII HDC Tracking Run

  • 210100 12/05/10 18:44  Pitt           HDC leakage currents at 2150 V

  • 210099 12/05/10 18:43  Pitt           HDC leakage currents at 2100 V

  • 210098 12/05/10 18:41  jhlee          qwtracking is running on cdaql8 in order to check DAQ status 

  • 210097 12/05/10 18:35  Pitt           HDC leakage currents - 2000 V

  • 210096 12/05/10 18:19  Pitt           Have MCC reduce beam curent

  • 210095 12/05/10 18:01  Pitt           Turned on Region 2 trigger scintillator detectors

  • 210094 12/05/10 17:50  Pitt           Turn on luminosity monitor event mode voltages

  • 210093 12/05/10 17:48  cdaq           End of Run 7914: 

  • 210092 12/05/10 17:45  Pitt           Superharp IHA3H07B scan at 100 pA

  • 210091 12/05/10 17:35  cdaq           Run 7914: Superharp scan at 100 pA

  • 210090 12/05/10 17:33  Pitt           Beam at "100 pA" Halo monitors on for superharp scan

  • 210089 12/05/10 17:30  Pitt           IHA3H07B - better format

  • 210088 12/05/10 17:29  leacock        lumis put into epics archiver

  • 210087 12/05/10 17:29  Pitt           IHA3H07B

  • 210086 12/05/10 17:21  cdaq           End of Run 7913: 

  • 210085 12/05/10 17:03  Pitt           Beam positions before superharp scan

  • 210084 12/05/10 17:02  Pitt           Beam positions prior to superharp scan

  • 210083 12/05/10 16:58  mgericke       Superharp IHA3H07A removed and disconnected

  • 210082 12/05/10 16:56  Pitt           Halo monitors on for superharp scan at 3 uA

  • 210081 12/05/10 16:55  cdaq           Run 7913: Superharp scan at 3 uA

  • 210080 12/05/10 16:36  cdaq           End of Run 7912: 

  • 210079 12/05/10 16:34  cdaq           Run 7912: Region 2 HDC data - no beam

  • 210078 12/05/10 16:29  cdaq           End of Run 7911: 

  • 210077 12/05/10 16:26  cdaq           Run 7911: Region 2 HDC data - no beam 

  • 210076 12/05/10 16:14  mack           large random noise in BCM2  moved during the downconverter swap

  • 210075 12/05/10 16:00  jwmartin       Shift Summary: Day Shift Summary

  • 210074 12/05/10 15:58  Dutta          Run 7905 was 40 uA not 140 uA

  • 210073 12/05/10 15:14  jwmartin       Beam: superharp stuck

  • 210072 12/05/10 15:09  Pitt           Comment on Region 2 leakage rates with no beam

  • 210071 12/05/10 14:53  kamyers        bcm asym and double difference versus time for Run 7905

  • 210070 12/05/10 14:51  cdaq           End of Run 7910: 

  • 210069 12/05/10 14:48  cdaq           Compton End of Run 20419: 

  • 210068 12/05/10 14:46  Dutta          (late entry) Compton tests during owl shift

  • 210067 12/05/10 14:42  Pitt           Region 2 scintillator rates

  • 210066 12/05/10 14:25  Pitt           Superharp scan problem

  • 210065 12/05/10 14:24  Pitt           Halo 3 and 4 on

  • 210064 12/05/10 14:19  cdaq           Compton Run 20419: 3 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 210063 12/05/10 14:18  cdaq           Compton End of Run 20418: 

  • 210062 12/05/10 14:11  cdaq           Compton Run 20418: 3 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 210061 12/05/10 14:10  cdaq           Run 7910: superharp scan with halo monitors on

  • 210060 12/05/10 13:57  Pitt           HDC and Region 2 TS installed on access - late entry

  • 210059 12/05/10 13:53  leacock        Target: 4K inlet flow stabilized

  • 210058 12/05/10 13:50  Pitt           Region 2 leakage currents with no beam

  • 210057 12/05/10 13:45  leacock        Target: 4K inlet flow went to zero multiple times and is still happening

  • 210056 12/05/10 13:37  buddhini       BCM double differences during run 7905

  • 210055 12/05/10 13:30  leacock        access to change bases on dslumi2,4,6,8 , uslumi1- to event mode

  • 210054 12/05/10 13:28  cdaq           End of Run 7909: 

  • 210053 12/05/10 13:25  Ramesh         Cavity BCMs need not be compared below 85 uA running

  • 210052 12/05/10 13:20  cdaq           Run 7909: Tracking HDC DAQ check

  • 210051 12/05/10 13:16  buddhini       BCM double differences during run 7904

  • 210050 12/05/10 13:16  cdaq           End of Run 7908: 

  • 210049 12/05/10 13:15  cdaq           Run 7908: Tracking HDC DAQ check

  • 210048 12/05/10 12:59  pking          Run plan update for Sunday Day through Monday Day

  • 210047 12/05/10 11:29  leacock        Target: glitch target alarm - no worries

  • 210046 12/05/10 10:22  pking          Turned off the MD HV after end of pedestal run 7907 

  • 210045 12/05/10 10:13  cdaq           End of Run 7907: 

  • 210044 12/05/10 09:56  Pitt           EPICS scaler temporary reconfiguration

  • 210043 12/05/10 09:51  rbo            MD 3+/4- preamp exchanged.

  • 210042 12/05/10 09:50  cdaq           Run 7907: Pedestal run

  • 210041 12/05/10 09:36  cdaq           End of Run 7906: 

  • 210040 12/05/10 09:26  Pitt           EPICS scaler temporary reconfiguration

  • 210039 12/05/10 09:24  gaskell        Compton: rebooted iochc10

  • 210038 12/05/10 09:21  leacock        lumi CM HV off

  • 210037 12/05/10 09:18  pking          Rob is making an access to change the suspect MD preamp

  • 210036 12/05/10 08:18  Dutta          Owl shift summary

  • 210035 12/05/10 08:12  cdaq           Beam Time Accounting

  • 210034 12/05/10 08:11  cdaq           Run 7906: Pedestal run

  • 210033 12/05/10 07:55  cdaq           End of Run 7905: 

  • 210032 12/05/10 06:34  cdaq           Run 7905: BCM Noise Investigations

  • 210031 12/05/10 06:33  cdaq           End of Run 7904: 

  • 210030 12/05/10 05:56  narayan        Target: pump tripped, and fixed by 'reset' -> 'clear' -> 'update'

  • 210029 12/05/10 05:50  pqwang         GeneralTools & HV GUI

  • 210028 12/05/10 05:03  cdaq           Run 7904: BCM Noise Investigations

  • 210027 12/05/10 04:57  cdaq           End of Run 7903: 

  • 210026 12/05/10 03:49  cdaq           Run 7903: pedestal run

  • 210025 12/05/10 03:48  cdaq           End of Run 7902: 

  • 210024 12/05/10 02:43  cdaq           Run 7902: pedestal run

  • 210023 12/05/10 01:52  pking          Requested reset of IOCSE20 to Autogain mode.

  • 210022 12/05/10 01:51  pqwang         bcm studies, run7901

  • 210021 12/05/10 01:50  cdaq           End of Run 7901: 

  • 210020 12/05/10 01:48  pking          Reconnected the BCM17 analog signal normally

  • 210019 12/05/10 01:47  pking          Run plan update for Sunday Owl and Day

  • 210018 12/05/10 01:44  pqwang         bcm studies, run7900

  • 210017 12/05/10 01:40  cdaq           Run 7901: BCM Noise Investigations

  • 210016 12/05/10 01:38  cdaq           End of Run 7900: 

  • 210015 12/05/10 01:37  pqwang         bcm studies, run7899

  • 210014 12/05/10 01:31  pqwang         bcm studies, run7898

  • 210013 12/05/10 01:28  cdaq           Run 7900: BCM Noise Investigations

  • 210012 12/05/10 01:26  cdaq           End of Run 7899: 

  • 210011 12/05/10 01:20  cdaq           Run 7899: BCM Noise Investigations

  • 210010 12/05/10 01:15  pqwang         bcm studies, run7897

  • 210009 12/05/10 01:14  cdaq           End of Run 7898: 

  • 210008 12/05/10 01:13  pking          Disconnected the BCM17 analog signal from the V/F preamp

  • 210007 12/05/10 01:11  cdaq           Run 7898: BCM Noise Investigations

  • 210006 12/05/10 00:57  cdaq           End of Run 7897: 

  • 210005 12/05/10 00:53  pqwang         bcm studies, run7896

  • 210004 12/05/10 00:52  cdaq           Run 7897: BCM Noise Investigations

  • 210003 12/05/10 00:50  cdaq           End of Run 7896: 

  • 210002 12/05/10 00:43  cdaq           Run 7896: BCM Noise Investigations

  • 210001 12/05/10 00:43  pqwang         bcm studies, run7895

  • 210000 12/05/10 00:41  cdaq           End of Run 7895: 

  • 209999 12/05/10 00:35  pking          Requested IOCSE20 to be "gains off" before run 7895

  • 209998 12/05/10 00:33  cdaq           Run 7895: BCM Noise Investigations

  • 209997 12/05/10 00:28  pqwang         bcm studies, run7894

  • 209996 12/05/10 00:22  cdaq           End of Run 7894: 

  • 209995 12/05/10 00:20  pqwang         bcm studies, run7893

  • 209994 12/05/10 00:17  cdaq           Run 7894: BCM Noise Investigations

  • 209993 12/05/10 00:16  pqwang         bcm studies, run 7892

  • 209992 12/05/10 00:12  leacock        bcm diffs run7891

  • 209991 12/05/10 00:10  leacock        bcm diffs run7890

  • 209990 12/05/10 00:09  leacock        bcm diffs run7889

  • 209989 12/05/10 00:04  cdaq           End of Run 7893: 

  • 209988 12/05/10 00:04  V. Tvaskis     Target: Target GUI and strip charts screenshots

  • 209987 12/05/10 00:01  mgericke       Shift Summary: Shift summary

  • 209986 12/05/10 00:01  cdaq           Beam Time Accounting

    • Saturday

  • 209985 12/04/10 23:58  cdaq           Run 7893: BCM Noise Investigations

  • 209984 12/04/10 23:57  cdaq           End of Run 7892: 

  • 209983 12/04/10 23:52  cdaq           Run 7892: BCM Noise Investigations

  • 209982 12/04/10 23:50  cdaq           End of Run 7891: 

  • 209981 12/04/10 23:47  cdaq           Run 7891: BCM Noise Investigations

  • 209980 12/04/10 23:47  leacock        general tools and HV GUI screenshot

  • 209979 12/04/10 23:44  cdaq           End of Run 7890: 

  • 209978 12/04/10 23:39  cdaq           Run 7890: BCM Noise Investigations

  • 209977 12/04/10 23:38  cdaq           End of Run 7889: 

  • 209976 12/04/10 23:35  cdaq           Run 7889: BCM Noise Investigations

  • 209975 12/04/10 23:34  mgericke       BCM cables were frequently disconnected during run 7888.

  • 209974 12/04/10 23:32  cdaq           End of Run 7888: 

  • 209973 12/04/10 23:13  cdaq           Run 7888: BCM Noise Investigations

  • 209972 12/04/10 22:52  cdaq           End of Run 7887: 

  • 209971 12/04/10 22:50  leacock        bcm differences with bcm2 card removed from crate

  • 209970 12/04/10 22:45  cdaq           Run 7887: BCM Noise Investigations

  • 209969 12/04/10 22:34  cdaq           End of Run 7886: 

  • 209968 12/04/10 22:27  cdaq           Run 7886: Cavity BPM calibration run

  • 209967 12/04/10 22:22  cdaq           End of Run 7885: 

  • 209966 12/04/10 22:21  Ramesh/John_   cavity BCM gain setting ranges

  • 209965 12/04/10 22:16  cdaq           Run 7885: Cavity BPM calibration run

  • 209964 12/04/10 22:14  cdaq           End of Run 7884: 

  • 209963 12/04/10 22:09  cdaq           Run 7884: Cavity BPM calibration run

  • 209962 12/04/10 22:07  cdaq           End of Run 7883: 

  • 209961 12/04/10 22:01  cdaq           Run 7883: Cavity BPM calibration run

  • 209960 12/04/10 21:59  cdaq           End of Run 7882: 

  • 209959 12/04/10 21:51  cdaq           Run 7882: Cavity BPM calibration run

  • 209958 12/04/10 21:45  cdaq           End of Run 7881: 

  • 209957 12/04/10 21:39  cdaq           Run 7881: Cavity BPM calibration run

  • 209956 12/04/10 21:37  cdaq           End of Run 7880: 

  • 209955 12/04/10 21:30  cdaq           Run 7880: Cavity BPM calibration run

  • 209954 12/04/10 21:27  Ramesh/John_   Beam steering for cavity BPM calibration

  • 209953 12/04/10 21:27  cdaq           End of Run 7879: 

  • 209952 12/04/10 21:22  cdaq           Run 7879: Cavity BPM calibration run

  • 209951 12/04/10 21:17  cdaq           End of Run 7878: 

  • 209950 12/04/10 21:13  cdaq           Run 7878: Cavity BPM calibration run

  • 209949 12/04/10 21:09  cdaq           End of Run 7877: 

  • 209948 12/04/10 21:03  cdaq           Run 7877: Cavity BPM calibration run 

  • 209947 12/04/10 19:33  cdaq           End of Run 7875: 

  • 209946 12/04/10 19:17  pking          Plan for the cavity BPM calibration

  • 209945 12/04/10 19:04  cdaq           Run 7875: Cavity BCM calibration run

  • 209944 12/04/10 18:57  gaskell/raki   Moller solenoid scan

  • 209943 12/04/10 18:46  cdaq           Beam Time Accounting

  • 209942 12/04/10 18:28  gaskell/raki   Moller backout

  • 209941 12/04/10 18:11  cdaq           Moller End of Run 576: 

  • 209940 12/04/10 18:08  mack           photo and drawing to help explain RII shielding test

  • 209939 12/04/10 18:02  cdaq           Moller Run 576: Solenoid field scan 3.75T current 0.75uA(Hall C BCM).

  • 209938 12/04/10 18:01  cdaq           Moller End of Run 575: 

  • 209937 12/04/10 17:52  cdaq           Moller Run 575: Solenoid field scan 3.75T current 0.75uA(Hall C BCM).

  • 209936 12/04/10 17:51  cdaq           Moller End of Run 574: 

  • 209935 12/04/10 17:47  brads          re: Firefox still not connecting to off-site on cdaql8 (perhaps this was a cvxwrks account)

  • 209934 12/04/10 17:43  cdaq           Moller Run 574: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209933 12/04/10 17:40  cdaq           Moller End of Run 573: 

  • 209932 12/04/10 17:31  cdaq           Moller Run 573: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209931 12/04/10 17:30  cdaq           Moller End of Run 572: 

  • 209930 12/04/10 17:21  cdaq           Moller Run 572: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209929 12/04/10 17:20  cdaq           Moller End of Run 571: 

  • 209928 12/04/10 17:20  cdaq           Moller Run 571: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209927 12/04/10 16:58  cdaq           Moller End of Run 570: 

  • 209926 12/04/10 16:56  cdaq           Moller Run 570: Solenoid field scan 2.2T current 0.65uA(Hall C BCM).

  • 209925 12/04/10 16:55  cdaq           Moller End of Run 569: 

  • 209924 12/04/10 16:48  mack           late entry: BCM1,2 filtering (not all of it, just on the input side, apparently)

  • 209923 12/04/10 16:47  cdaq           Moller Run 569: Solenoid field scan 2.0T current 0.76uA(Hall C BCM).

  • 209922 12/04/10 16:44  cdaq           Moller End of Run 568: 

  • 209921 12/04/10 16:33  cdaq           Moller Run 568: Solenoid field scan 2.2T current 0.65uA(Hall C BCM).

  • 209920 12/04/10 16:33  cdaq           Moller End of Run 567: 

  • 209919 12/04/10 16:26  cdaq           Moller Run 567: Solenoid field scan 2.2T current 0.65uA(Hall C BCM).

  • 209918 12/04/10 16:21  cdaq           Moller End of Run 566: 

  • 209917 12/04/10 16:11  cdaq           Moller Run 566: Solenoid field scan 2.3T current 0.65uA(Hall C BCM).

  • 209916 12/04/10 16:10  cdaq           Moller End of Run 565: 

  • 209915 12/04/10 16:07  Jiawei         Target: End of shift Screenshot

  • 209914 12/04/10 16:02  jwmartin       Shift Summary: Day Shift Summary

  • 209913 12/04/10 16:01  cdaq           Moller Run 565: Solenoid field scan 2.3T current 0.65uA(Hall C BCM).

  • 209912 12/04/10 15:59  cdaq           Moller End of Run 564: 

  • 209911 12/04/10 15:59  cdaq           Moller Run 564: Solenoid field scan 2.3T current 0.65uA(Hall C BCM).

  • 209910 12/04/10 15:57  cdaq           Moller End of Run 563: 

  • 209909 12/04/10 15:56  cdaq           Moller Run 563: Solenoid field scan 2.5T current 0.65uA(Hall C BCM).

  • 209908 12/04/10 15:50  cdaq           Moller End of Run 562: 

  • 209907 12/04/10 15:40  cdaq           Moller Run 562: Solenoid field scan 2.5T current 0.65uA(Hall C BCM).

  • 209906 12/04/10 15:40  cdaq           Moller End of Run 561: 

  • 209905 12/04/10 15:33  Jiawei         Target: 4K inlet flow fluctuates

  • 209904 12/04/10 15:29  cdaq           Moller Run 561: Solenoid field scan 2.5T current 0.65uA(Hall C BCM).

  • 209903 12/04/10 15:29  cdaq           Moller End of Run 560: 

  • 209902 12/04/10 15:19  cdaq           Moller Run 560: Solenoid field scan 2.5T current 0.65uA(Hall C BCM).

  • 209901 12/04/10 15:12  cdaq           Moller End of Run 559: 

  • 209900 12/04/10 15:01  cdaq           Moller Run 559: Solenoid field scan 2.5T current 0.65uA(Hall C BCM).

  • 209899 12/04/10 14:54  jhlee          Beam: Run 7757 BCM calibration using hallc_bcm_calib 

  • 209898 12/04/10 14:50  cdaq           Moller End of Run 558: 

  • 209897 12/04/10 14:46  jwmartin       snapshot of General_Tools.adl

  • 209896 12/04/10 14:44  W. Deconinck   Firefox still not connecting to off-site on cdaql8

  • 209895 12/04/10 14:39  cdaq           Moller Run 558: Solenoid field scan 3.00T current 0.65uA(Hall C BCM).

  • 209894 12/04/10 14:37  cdaq           Moller End of Run 557: 

  • 209893 12/04/10 14:28  cdaq           Moller Run 557: Solenoid field scan 3.00T current 0.65uA(Hall C BCM).

  • 209892 12/04/10 14:26  cdaq           Moller End of Run 556: 

  • 209891 12/04/10 14:23  cdaq           Moller Run 556: Solenoid field scan 3.00T current 0.65uA(Hall C BCM).

  • 209890 12/04/10 14:23  cdaq           Moller End of Run 555: 

  • 209889 12/04/10 14:13  cdaq           Moller Run 555: Solenoid field scan 3.00T current 0.65uA(Hall C BCM).

  • 209888 12/04/10 14:13  cdaq           Moller End of Run 554: 

  • 209887 12/04/10 14:04  cdaq           Moller Run 554: Solenoid field scan 3.00T current 0.65uA(Hall C BCM).

  • 209886 12/04/10 13:44  cdaq           Moller End of Run 553: 

  • 209885 12/04/10 13:34  cdaq           Moller Run 553: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209884 12/04/10 13:30  cdaq           Moller End of Run 552: 

  • 209883 12/04/10 13:21  cdaq           Moller Run 552: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209882 12/04/10 13:20  cdaq           Moller End of Run 551: 

  • 209881 12/04/10 13:11  cdaq           Moller Run 551: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209880 12/04/10 13:10  cdaq           Moller End of Run 550: 

  • 209879 12/04/10 13:00  cdaq           Moller Run 550: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209878 12/04/10 12:59  cdaq           Moller End of Run 549: 

  • 209877 12/04/10 12:57  cdaq           Moller Run 549: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209876 12/04/10 12:53  cdaq           Moller End of Run 548: 

  • 209875 12/04/10 12:43  cdaq           Moller Run 548: Solenoid field scan 3.75T current 0.65uA(Hall C BCM).

  • 209874 12/04/10 12:32  cdaq           Moller End of Run 547: 

  • 209873 12/04/10 12:23  cdaq           Moller Run 547: Solenoid field scan 3.5T current 0.65uA(Hall C BCM).

  • 209872 12/04/10 11:58  cdaq           Moller End of Run 546: 

  • 209871 12/04/10 11:50  cdaq           Moller Run 546: Solenoid field scan 3.5T current 0.66uA(Hall C BCM).

  • 209870 12/04/10 11:36                 Updated QwGUI Hall C tab to use the new event cut scheme to select good events.

  • 209869 12/04/10 11:25  cdaq           Moller End of Run 545: 

  • 209868 12/04/10 11:23  cdaq           Moller Run 545: Solenoid field scan 3.5T current 0.66uA(Hall C BCM).

  • 209867 12/04/10 11:22  cdaq           Moller End of Run 544: 

  • 209866 12/04/10 11:13  cdaq           Moller Run 544: Solenoid field scan 3.5T current 0.66uA(Hall C BCM).

  • 209865 12/04/10 11:12  cdaq           Moller End of Run 543: 

  • 209864 12/04/10 11:10  Ramesh         cavity bcm response at different current

  • 209863 12/04/10 11:06  gaskell        Moller backgrounds very sensitive to beam position near raster

  • 209862 12/04/10 11:04  cdaq           Moller Run 543: Solenoid field scan 3.5T current 0.66uA.

  • 209861 12/04/10 11:01  cdaq           Moller End of Run 542: 

  • 209860 12/04/10 11:00  cdaq           Moller Run 542: Solenoid field scan 3.5T current 0.66uA.

  • 209859 12/04/10 10:57  cdaq           Moller End of Run 541: 

  • 209858 12/04/10 10:49  cdaq           Moller Run 541: Solenoid field scan 3.5T current 0.66uA. 

  • 209857 12/04/10 10:47  cdaq           Moller End of Run 540: 

  • 209856 12/04/10 10:43  cdaq           Moller Run 540: Solenoid field scan 3.5T current 0.66uA

  • 209855 12/04/10 10:40  cdaq           Moller End of Run 539: 

  • 209854 12/04/10 10:39  cdaq           Moller Run 539: Solenoid field scan 3.5T current 0.66uA 

  • 209853 12/04/10 10:34  cdaq           Moller End of Run 538: 

  • 209852 12/04/10 10:33  cdaq           Moller Run 538: Solenoid field scan 3.5T current 0.66uA

  • 209851 12/04/10 10:27  narayan        Compton: e-detector studies

  • 209850 12/04/10 10:27  smacewan       FF status is on our GeneralTools screen. Let's look at it every once and a while!

  • 209849 12/04/10 10:14  suleiman       Beam: FF has been OFF during this Run and for the last day

  • 209848 12/04/10 09:48  rakithab       Beam: This is correlated with Beam trips

  • 209847 12/04/10 09:06  gaskell        Moller setup 

  • 209846 12/04/10 08:59  cdaq           End of Run 7874: 

  • 209845 12/04/10 08:36  cdaq           Moller End of Run 537: 

  • 209844 12/04/10 08:35  cdaq           Moller Run 537: DAQ check

  • 209843 12/04/10 08:25  Dutta          Owl shift summary

  • 209842 12/04/10 08:17  cdaq           Beam Time Accounting

  • 209841 12/04/10 08:07  cdaq           Run 7874: pedestal run 40 uA, 4x4 raster

  • 209840 12/04/10 08:07  Jiawei         Target: Shift start: Target GUI and strip charts screenshots

  • 209839 12/04/10 08:06  cdaq           End of Run 7873: 

  • 209838 12/04/10 07:51  cdaq           Run 7873: Background Studies: LH2, 3x3 raster, 20 uA

  • 209837 12/04/10 07:42  cdaq           End of Run 7872: 

  • 209836 12/04/10 07:15  pqwang         Screenshots of GeneralTools and CAEN HV GUI

  • 209835 12/04/10 07:14  pqwang         Screenshots of GeneralTools and CAEN HV GUI

  • 209834 12/04/10 07:12  pqwang         Oops, replace the Figure 6 in the last entry

  • 209833 12/04/10 07:03  pqwang         run7870 bcm plot

  • 209832 12/04/10 06:53  pqwang         run7870 BPM plot

  • 209831 12/04/10 06:44  cdaq           Run 7872: Background Studies: LH2, 3x3 raster, 20 uA

  • 209830 12/04/10 06:43  cdaq           End of Run 7871: 

  • 209829 12/04/10 06:31  pqwang         run7870: helicity correlated bcm diff

  • 209828 12/04/10 06:19  pqwang         md3pos & md4neg yield from ped. run - run#7871

  • 209827 12/04/10 06:16  pqwang         md3pos & md4neg yield from ped. run - run#7870

  • 209826 12/04/10 06:05  cdaq           7871 is a pedestal run

  • 209825 12/04/10 05:51  cdaq           Run 7871: Background Studies: LH2, 3x3 raster, 20 uA

  • 209824 12/04/10 05:49  cdaq           End of Run 7870: 

  • 209823 12/04/10 04:25  cdaq           Run 7870: pedestal run, 40 uA, 4x4 raster

  • 209822 12/04/10 02:20  mack,Jiawei,   end of RII shielding test

  • 209821 12/04/10 02:00  narayan        Target: target moved again out of beam

  • 209820 12/04/10 02:00  kamyers        Neutral Background Studies Run Summary - Part 2 Round 1 [fixed format]

  • 209819 12/04/10 01:59  kamyers        Neutral Background Studies Run Summary - Part 2 Round 1

  • 209818 12/04/10 01:52  cdaq           End of Run 7869: 

  • 209817 12/04/10 01:50  narayan        Target: posted under wrong heading

  • 209816 12/04/10 01:49  narayan        Target: previous entry made under wrong heading

  • 209815 12/04/10 01:43  narayan        Target: target motion 'green' does not necessarily imply 'motion complete' ?

  • 209814 12/04/10 01:42  cdaq           Run 7869: Background Studies: no target, 4x4raster, 20 uA

  • 209813 12/04/10 01:30  cdaq           End of Run 7868: 

  • 209812 12/04/10 01:29  narayan        Compton: Moved to US 2% Al

  • 209811 12/04/10 01:26  cdaq           Run 7868: Background Studies: 2% US Al, 4x4raster, 20 uA

  • 209810 12/04/10 01:19  kamyers        Striptool for run 7867 (background studies)

  • 209809 12/04/10 01:18  cdaq           End of Run 7867: 

  • 209808 12/04/10 01:11  cdaq           Run 7867: Background Studies: LH2, 3x3 raster, 20 uA

  • 209807 12/04/10 00:49  cdaq           End of Run 7866: 

  • 209806 12/04/10 00:36  cdaq           Run 7866: Pedestal

  • 209805 12/04/10 00:35  kamyers        Striptool for run 7865 (background studies

  • 209804 12/04/10 00:34  cdaq           End of Run 7865: 

  • 209803 12/04/10 00:28  cdaq           Run 7865: Background Studies: LH2, 3x3 raster, 20 uA

  • 209802 12/04/10 00:25  narayan        Compton: target moved to LH2

  • 209801 12/04/10 00:17  cdaq           End of Run 7864: 

  • 209800 12/04/10 00:16  mgericke       Striptool for run 7864 (background studies)

  • 209799 12/04/10 00:10  cdaq           Run 7864: Background Studies: 2% US Al, 4x4 raster, 20 uA

  • 209798 12/04/10 00:04  cdaq           Beam Time Accounting

  • 209797 12/04/10 00:00  mgericke       Shift Summary: Shift summary

    • Friday

  • 209796 12/03/10 23:44  mgericke       Striptool for run 7863 (background studies)

  • 209795 12/03/10 23:43  cdaq           End of Run 7863: 

  • 209794 12/03/10 23:43  kamyers        Neutral Background Studies Run Summary - Part 1 Round 1

  • 209793 12/03/10 23:37  cdaq           Run 7863: Background Studies: 2% US Al, 4x4 raster, 20 uA

  • 209792 12/03/10 23:33  mgericke       Striptool for run 7862 (background studies)

  • 209791 12/03/10 23:32  cdaq           End of Run 7862: 

  • 209790 12/03/10 23:30  jpan           Screenshots of GeneralTools and CAEN HV GUI

  • 209789 12/03/10 23:26  cdaq           Run 7862: Background Studies: LH2, 3x3 raster, 20 uA

  • 209788 12/03/10 23:23  cdaq           End of Run 7861: 

  • 209787 12/03/10 23:14  cdaq           Run 7861: Pedestal

  • 209786 12/03/10 22:45  mgericke       Striptool for run 7860 (background studies)

  • 209785 12/03/10 22:43  cdaq           End of Run 7860: 

  • 209784 12/03/10 22:37  cdaq           Run 7860: Background Studies: LH2, 3x3 raster, 20 uA

  • 209783 12/03/10 22:35  jpan           BPM plots - run#7856

  • 209782 12/03/10 22:31  mgericke       Striptool for run 7859 (background studies)

  • 209781 12/03/10 22:23  cdaq           Run 7859: Background Studies: 2% US Al, 4x4 raster, 20 uA

  • 209780 12/03/10 22:15  jpan           MD yield & FFT - run#7856 (first100k)

  • 209779 12/03/10 22:04  jpan           MD yield & FFT - run#7854 (first100k)

  • 209778 12/03/10 21:53  cdaq           End of Run 7858: 

  • 209777 12/03/10 21:52  jpan           MD yield - run#7851 (first100k)

  • 209776 12/03/10 21:45  cdaq           Run 7858: Pedestal

  • 209775 12/03/10 21:43  mgericke       Striptool for run 7857 (background studies)

  • 209774 12/03/10 21:42  cdaq           End of Run 7857: 

  • 209773 12/03/10 21:37  cdaq           Run 7857: Background Studies: 2% US Al, 4x4 raster, 20 uA

  • 209772 12/03/10 21:30  jpan           md3pos & md4neg yield from ped. run - run#7855

  • 209771 12/03/10 21:27  mgericke       Striptool for run 7854 (background studies)

  • 209770 12/03/10 21:27  cdaq           End of Run 7856: 

  • 209769 12/03/10 21:18  cdaq           Run 7856: Background Studies: LH2, 3x3 raster, 20 uA

  • 209768 12/03/10 21:03  jpan           More md3pos & md4neg yield plots from ped. run - run#7848

  • 209767 12/03/10 20:54  cdaq           End of Run 7855: 

  • 209766 12/03/10 20:48  cdaq           Run 7855: pedestal run

  • 209765 12/03/10 20:46  mgericke       Striptool for run 7854 (background studies)

  • 209764 12/03/10 20:46  cdaq           End of Run 7854: 

  • 209763 12/03/10 20:40  cdaq           Run 7854: Background Studies: LH2 3x3 Raster, 20 uA

  • 209762 12/03/10 20:34  mgericke       Striptool for run 7853 (background studies)

  • 209761 12/03/10 20:33  cdaq           End of Run 7853: 

  • 209760 12/03/10 20:27  cdaq           Run 7853: Background Studies: 2% US Al 4x4 Raster, 20 uA

  • 209759 12/03/10 20:15  pking          Finished update of QwAnalysis/devel to r2273

  • 209758 12/03/10 20:14  buddhini       Updated the QwGUI HallC beamline tab (only) to v 2275. Now the GUI has a button to plot BCM double differences.

  • 209757 12/03/10 19:59  pking          Run plan for the weekend

  • 209756 12/03/10 19:52  mgericke       Correction: This run (7852) was taken with the 2% US Al target , 4x4 raster, at 20 uA 

  • 209754 12/03/10 19:50  mgericke       Striptool run 7852 (background studies)

  • 209753 12/03/10 19:48  cdaq           End of Run 7852: 

  • 209752 12/03/10 19:43  smacewan       Look at RAW hardware sums for MD's during pedestal runs.

  • 209751 12/03/10 19:42  cdaq           Run 7852: Background Studies: LH2 3x3 Raster, 20 uA

  • 209750 12/03/10 19:40  mgericke       StripTool for run 7851 (background studies)

  • 209749 12/03/10 19:36  cdaq           End of Run 7851: 

  • 209748 12/03/10 19:28  cdaq           Run 7851: Background Studies: LH2 3x3 Raster, 20 uA

  • 209747 12/03/10 19:12  jpan           Raster rate map for Run#7849 - W plug centering

  • 209746 12/03/10 19:10  cdaq           End of Run 7850: 

  • 209745 12/03/10 19:09  cdaq           Run 7850: crap 

  • 209744 12/03/10 19:08  cdaq           End of Run 7849: 

  • 209743 12/03/10 19:06  cdaq           Run 7849: W plug raster image

  • 209742 12/03/10 18:34  jpan           MD3pos yield and MD4neg yield in run#7848 

  • 209741 12/03/10 18:23  mgericke       Going to beam permit

  • 209740 12/03/10 18:21  cdaq           End of Run 7848: 

  • 209739 12/03/10 18:16  V. Tvaskis     pump trip alarm

  • 209738 12/03/10 18:15  pking          RII shielding test plan from Dave

  • 209737 12/03/10 18:09  cdaq           Compton End of Run 20417: 

  • 209736 12/03/10 18:01  cdaq           Run 7848: pedestal test

  • 209735 12/03/10 17:59  cdaq           End of Run 7847: 

  • 209734 12/03/10 17:03  cdaq           Run 7847: pedestal test

  • 209733 12/03/10 17:02  cdaq           End of Run 7846: 

  • 209732 12/03/10 16:49  smacewan       Swapped MD CM bases for MD3+ and MD4-

  • 209731 12/03/10 16:26  cdaq           Run 7846: pedestal run

  • 209730 12/03/10 16:25  cdaq           End of Run 7845: 

  • 209729 12/03/10 16:09  sxyang         Target GUI and strip charts screenshots

  • 209728 12/03/10 16:02  cdaq           Beam Time Accounting

  • 209727 12/03/10 16:00  mack/JiaWei    ready for RII shielding test

  • 209726 12/03/10 15:51  Adesh          Shift Summary: Shift summary

  • 209725 12/03/10 15:38  cdaq           Run 7845: pedestal run

  • 209724 12/03/10 15:34  cdaq           End of Run 7844: 

  • 209723 12/03/10 14:25  sxyang         pump speed slowed down

  • 209722 12/03/10 14:16  cdaq           Run 7844: pedestal  run

  • 209721 12/03/10 14:15  cdaq           End of Run 7843: 

  • 209720 12/03/10 14:00  dalton         Beam: Charge feedback excursions

  • 209719 12/03/10 13:28  covrig         Target: coolant hiccup 

  • 209718 12/03/10 13:24  Jiawei         comparison of the old and new versions of analyzers

  • 209717 12/03/10 13:19  jhoskins       Test of Beam Modulation system today

  • 209716 12/03/10 13:15  dalton         Beam: PC ringing test

  • 209715 12/03/10 13:05  sxyang         Target GUI and strip charts screenshots

  • 209714 12/03/10 13:03  cdaq           Run 7843: pedestal run

  • 209713 12/03/10 13:02  cdaq           End of Run 7842: 

  • 209712 12/03/10 12:29  pking          Analysis: Beginning an update of "devel" QwAnalysis on cdaq machines

  • 209711 12/03/10 11:39  cdaq           Run 7842: pedestal test

  • 209710 12/03/10 11:38  cdaq           End of Run 7841: 

  • 209709 12/03/10 11:22  cdaq           Run 7841: pedestal run

  • 209708 12/03/10 11:21  cdaq           End of Run 7840: 

  • 209707 12/03/10 11:19  cdaq           Run 7840: beam modulation sequencer software test

  • 209706 12/03/10 11:17  cdaq           End of Run 7839: 

  • 209705 12/03/10 11:00  cdaq           Run 7839: beam modulation sequencer software test

  • 209704 12/03/10 10:57  cdaq           Run 7838: beam modulation sequencer software test[junk]

  • 209703 12/03/10 10:54  jhlee          too late entry : update F1TDC status (Dec 02, 2010)

  • 209702 12/03/10 10:44  cdaq           End of Run 7837: 

  • 209701 12/03/10 10:43  cdaq           Run 7837: beam modulation sequencer software test

  • 209700 12/03/10 10:27  cdaq           End of Run 7836: 

  • 209699 12/03/10 10:23  cdaq           Run 7836: beam modulation sequencer software test

  • 209698 12/03/10 10:19  cdaq           End of Run 7835: 

  • 209697 12/03/10 10:18  cdaq           Run 7835: beam modulation sequencer software test

  • 209696 12/03/10 10:15  cdaq           End of Run 7834: 

  • 209695 12/03/10 10:14  cdaq           Run 7834: beam modulation sequencer software test

  • 209694 12/03/10 10:00  cdaq           End of Run 7833: 

  • 209693 12/03/10 09:58  cdaq           Run 7833: beam modulation sequencer software test

  • 209692 12/03/10 09:51  cdaq           End of Run 7832: 

  • 209691 12/03/10 09:49  cdaq           Run 7832: beam modulation sequencer software test

  • 209690 12/03/10 09:46  cdaq           Run 7831: beam modulation sequencer software test

  • 209689 12/03/10 09:35  cdaq           End of Run 7830: 

  • 209688 12/03/10 09:33  cdaq           Run 7830: beam modulation sequencer software test

  • 209687 12/03/10 09:30  cdaq           End of Run 7829: 

  • 209686 12/03/10 09:28  Adesh          Hall in restricted access

  • 209685 12/03/10 09:27  cdaq           Compton End of Run 20417: 

  • 209684 12/03/10 09:19  narayan        Compton: e-detector studies

  • 209683 12/03/10 09:19  cdaq           Run 7829: beam modulation sequencer software test

  • 209682 12/03/10 09:10  cdaq           Run 7828: beam modulation sequencer software test

  • 209681 12/03/10 09:08  Adesh          activity in the Hall during controlled access

  • 209680 12/03/10 09:06  cdaq           End of Run 7827: 

  • 209679 12/03/10 09:00  cdaq           Run 7827: beam modulation sequencer software test

  • 209678 12/03/10 08:51  cdaq           End of Run 7826: 

  • 209677 12/03/10 08:48  cdaq           Run 7826: beam modulation sequencer software test

  • 209676 12/03/10 08:47  cdaq           End of Run 7825: 

  • 209675 12/03/10 08:42  cdaq           Run 7825: beam modulation software sequencer test

  • 209674 12/03/10 08:32  cdaq           End of Run 7824: 

  • 209673 12/03/10 08:18  sxyang         unstable 4k supply

  • 209672 12/03/10 08:17  cdaq           Compton Run 20417: 140 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209671 12/03/10 08:15  cdaq           Compton End of Run 20416: 

  • 209670 12/03/10 08:14  narayan        Compton: e-detector studies

  • 209669 12/03/10 07:52  V. Tvaskis     Compton: Compton Edge at 150 uA

  • 209668 12/03/10 07:44  cdaq           Run 7824: No target, raster 4x4, 20 uA, pedestal run

  • 209667 12/03/10 07:41  cdaq           Compton Run 20416: 140 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209666 12/03/10 07:34  Dutta          Owl Shift Summary

  • 209665 12/03/10 07:32  cdaq           End of Run 7823: 

  • 209664 12/03/10 07:28  cdaq           Compton End of Run 20415: 

  • 209663 12/03/10 07:11  cdaq           Compton Run 20415: 150 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209662 12/03/10 07:02  pqwang         Screenshots of GeneralTools and CAEN HV GUI

  • 209661 12/03/10 06:50  cdaq           Run 7823: No target, raster 4x4, 20 uA, pedestal run

  • 209660 12/03/10 06:49  cdaq           End of Run 7822: 

  • 209659 12/03/10 06:17  cdaq           Compton Run 20414: 140 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209658 12/03/10 06:16  cdaq           Compton End of Run 20413: 

  • 209657 12/03/10 05:46  V. Tvaskis     Compton: Electron Detector

  • 209656 12/03/10 05:45  V. Tvaskis     Compton: Electron Detector

  • 209655 12/03/10 04:57  Ramesh         Cavity BCMs not configured for low current runnings

  • 209654 12/03/10 03:56  cdaq           Compton Run 20413: 140 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209653 12/03/10 03:25  Dutta          Wilbur, Charlotte et al turned off

  • 209652 12/03/10 03:14  cdaq           Compton Run 20412: 140 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209651 12/03/10 03:01  cdaq           Run 7822: No target, raster 4x4, 20 uA, pedestal run

  • 209650 12/03/10 02:59  pqwang         run7817: BCM double difference

  • 209649 12/03/10 02:58  cdaq           End of Run 7821: 

  • 209648 12/03/10 02:57  cdaq           Run 7821: No target, raster 4x4, 20 uA, pedestal run

  • 209647 12/03/10 02:56  cdaq           Compton End of Run 20411: 

  • 209646 12/03/10 02:52  pqwang         raster map of run7820

  • 209645 12/03/10 02:51  cdaq           End of Run 7820: 

  • 209644 12/03/10 02:49  Dutta          W-plug  scan: Run 7820 (previous runs was in parity mode and ps7 .neq. 1 therefore no good)

  • 209643 12/03/10 02:47  cdaq           Run 7820: No target, raster 12x12, 1 uA, W plug scan

  • 209642 12/03/10 02:44  cdaq           End of Run 7819: 

  • 209641 12/03/10 02:41  cdaq           Run 7819: No target, raster 12x12, 1 uA, W plug scan

  • 209640 12/03/10 02:37  cdaq           End of Run 7818: 

  • 209639 12/03/10 02:36  Dutta          W-plug  scan: Run 7818

  • 209638 12/03/10 02:35  pqwang         run7816: BCM double difference

  • 209637 12/03/10 02:30  cdaq           Run 7818: No target, raster 12x12, 1 uA, W plug scan

  • 209636 12/03/10 02:19  cdaq           End of Run 7817: 

  • 209635 12/03/10 02:08  cdaq           Run 7817: No target, raster 4x4, 10 uA, BCM noise test

  • 209634 12/03/10 02:07  cdaq           End of Run 7816: 

  • 209633 12/03/10 01:55  cdaq           Run 7816: No target, no raster, 10 uA, BCM noise test

  • 209632 12/03/10 01:51  cdaq           Beam Time Accounting

  • 209631 12/03/10 01:40  cdaq           End of Run 7815: 

  • 209630 12/03/10 01:36  balewski       regression ver3, CVS for MD & LUMI

  • 209629 12/03/10 01:21  cdaq           Compton Run 20411: 10 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209628 12/03/10 01:16  narayan        Target: regular screenshot 

  • 209627 12/03/10 01:00  cdaq           Run 7815: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209626 12/03/10 00:58  cdaq           End of Run 7814: 

  • 209625 12/03/10 00:45  cdaq           Compton End of Run 20410: 

  • 209624 12/03/10 00:21  pqwang         run7811: BCM double difference

  • 209623 12/03/10 00:09  cdaq           Run 7814: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209622 12/03/10 00:04  cdaq           End of Run 7813:

    • Thursday

  • 209621 12/02/10 23:46  rob            scanner position has been changed, but charlotte position has not.

  • 209620 12/02/10 23:12  jpan           Screenshots of GeneralTools and CAEN HV GUI

  • 209619 12/02/10 22:52  pking          Some slight changes to overnight run plan

  • 209618 12/02/10 22:52  Leckey         Swing Shift summary

  • 209617 12/02/10 22:50  cdaq           Run 7813: detectors off

  • 209616 12/02/10 22:50  cdaq           End of Run 7812: 

  • 209615 12/02/10 22:32  cdaq           Compton Run 20410: 10uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209614 12/02/10 22:14  cdaq           Run 7812: detectors off

  • 209613 12/02/10 22:12  cdaq           Compton End of Run 20409: 

  • 209612 12/02/10 22:11  cdaq           Run 7812: detectors off

  • 209611 12/02/10 22:09  donjones       compton rates 150uA

  • 209610 12/02/10 22:05  narayan        Compton: e-detector studies to proceed

  • 209609 12/02/10 21:56  mack           BCM1,2 filtering

  • 209608 12/02/10 21:55  mgericke       Main detector switched back to current mode ...

  • 209607 12/02/10 21:55  mgericke       Main detector switched back to current mode ...

  • 209606 12/02/10 21:50  narayan        Compton: e-detector studies to proceed

  • 209605 12/02/10 21:45  cdaq           End of Run 7811: 

  • 209604 12/02/10 21:43  cdaq           Run 7811: detectors off

  • 209603 12/02/10 21:41  cdaq           Compton Run 20409: 150 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209602 12/02/10 21:37  covrig         Target: parked the target coolant supplies (again)

  • 209601 12/02/10 21:37  jpan           BCM DD plots  - Run#7810

  • 209600 12/02/10 21:25  jpan           BCM DD plots during compton tune - Run#7809

  • 209599 12/02/10 21:16  cdaq           End of Run 7810: 

  • 209598 12/02/10 21:08  cdaq           End of Run 7809: 

  • 209597 12/02/10 20:08  pking          Requested 4x4 raster since the target is out, to allow greater than 10 uA on the dump window

  • 209596 12/02/10 20:02  cdaq           Run 7809: Parasitic run during compton tuneup

  • 209595 12/02/10 19:59  pking          Newest orbit lock settings from Jim

  • 209594 12/02/10 19:51  pking          Run plan for remainder of swing and owl

  • 209593 12/02/10 19:41  mack           BCM1,2 grounding

  • 209592 12/02/10 19:38  covrig         Target: weird hph behavior caused by bcm calibration (maybe?)

  • 209591 12/02/10 19:37  Leckey         Back to current mode

  • 209590 12/02/10 19:34  cdaq           End of Run 7808: 

  • 209589 12/02/10 19:31  cdaq           Run 7808: LED Test back in current mode

  • 209588 12/02/10 19:29  pking          QTOR is broken; back out of event mode; get ready for Compton tuning

  • 209587 12/02/10 19:14  cdaq           Run 7807: LED Test back in current mode

  • 209586 12/02/10 19:10  cdaq           End of Run 7806: 

  • 209585 12/02/10 19:02  V. Tvaskis     Target: Sscattering Chmaber

  • 209584 12/02/10 18:28  V. Tvaskis     Target: NO QTOR Allarm

  • 209583 12/02/10 17:35  cdaq           Run 7806: Traking DAQ test

  • 209582 12/02/10 17:34  cdaq           End of Run 7805: 

  • 209581 12/02/10 17:23  jhlee          the recent JAVA jdk is used for CODA now

  • 209580 12/02/10 17:20  cdaq           Run 7805: Traking DAQ test

  • 209579 12/02/10 17:09  covrig         Target: un-parked the coolant supplies

  • 209578 12/02/10 16:59  cdaq           End of Run 7804: 

  • 209577 12/02/10 16:57  cdaq           Run 7804: Traking DAQ test

  • 209576 12/02/10 16:56  cdaq           End of Run 7803: 

  • 209575 12/02/10 16:55  cdaq           Run 7803: Traking DAQ test

  • 209574 12/02/10 16:55  cdaq           End of Run 7802: 

  • 209573 12/02/10 16:52  cdaq           Run 7802: Traking DAQ test

  • 209572 12/02/10 16:52  cdaq           End of Run 7801: 

  • 209571 12/02/10 16:50  cdaq           Run 7801: Traking DAQ test

  • 209570 12/02/10 16:46  sxyang         screenshot of general tools and hv_tools

  • 209569 12/02/10 16:24  Jiawei         Shift Summary: Day shift summary

  • 209568 12/02/10 16:07  cdaq           Beam Time Accounting

  • 209567 12/02/10 16:05  cdaq           End of Run 7800: 

  • 209566 12/02/10 15:57  cdaq           Run 7800: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209565 12/02/10 15:41  cdaq           End of Run 7799: 

  • 209564 12/02/10 15:13  cdaq           Run 7799: Real Tracking DAQ starts under John

  • 209563 12/02/10 15:09  cdaq           End of Run 7798: 

  • 209562 12/02/10 15:02  cdaq           Run 7798: Real Tracking DAQ starts under John

  • 209561 12/02/10 15:01  cdaq           End of Run 7797: 

  • 209560 12/02/10 14:59  cdaq           Run 7797: Tracking DAQ

  • 209559 12/02/10 14:56  Jiawei         Late entry: John and Siyuan put the drift chambers on octant 3 and 7 position in R3

  • 209558 12/02/10 14:55  cdaq           End of Run 7796: 

  • 209557 12/02/10 14:53  cdaq           Run 7796: Tracking DAQ

  • 209556 12/02/10 14:39  cdaq           End of Run 7795: 

  • 209555 12/02/10 14:32  Jiawei         Joe hasn't finished the QTor work, plan to finish it around 4:30pm

  • 209554 12/02/10 14:22  cdaq           Run 7795: Tracking DAQ

  • 209553 12/02/10 14:20  cdaq           End of Run 7794: 

  • 209552 12/02/10 14:14  cdaq           Run 7794: Tracking DAQ

  • 209551 12/02/10 14:13  cdaq           End of Run 7793: 

  • 209550 12/02/10 14:10  cdaq           Run 7793: Tracking DAQ

  • 209549 12/02/10 14:09  cdaq           End of Run 7792: 

  • 209548 12/02/10 14:07  cdaq           Run 7792: Tracking DAQ

  • 209547 12/02/10 13:59  cdaq           End of Run 7791: 

  • 209546 12/02/10 13:57  cdaq           Run 7791: Parity DAQ test

  • 209545 12/02/10 13:54  cdaq           End of Run 7790: 

  • 209544 12/02/10 13:51  cdaq           Run 7790: beam modulation software sequencer test

  • 209543 12/02/10 13:46  cdaq           Run 7789: beam modulation software sequencer test

  • 209542 12/02/10 13:43  cdaq           Run 7788: Beam Modulation Sfotware Sequencer test

  • 209541 12/02/10 13:35  cdaq           Run 7787: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209540 12/02/10 13:28  cdaq           End of Run 7786: 

  • 209539 12/02/10 13:27  cdaq           Run 7786: LED cali

  • 209538 12/02/10 13:24  cdaq           End of Run 7785: 

  • 209537 12/02/10 13:23  cdaq           Run 7785: LED cali

  • 209536 12/02/10 13:21  withers        Target: LH2 pump fault history now available

  • 209535 12/02/10 13:18  cdaq           End of Run 7784: 

  • 209534 12/02/10 13:17  cdaq           Run 7784: LED cali

  • 209533 12/02/10 13:08  cdaq           Run 7783: LED cali

  • 209532 12/02/10 13:07  cdaq           End of Run 7782: 

  • 209531 12/02/10 13:06  cdaq           Run 7782: LED cali

  • 209530 12/02/10 12:47  saw            g0ioc2 reboot

  • 209529 12/02/10 12:45  cdaq           Run 7781: LED cali

  • 209528 12/02/10 12:35  Armstrong      Charge Feedback not working or not calibrated??

  • 209527 12/02/10 12:33  jpan           scanner control box removed from hall

  • 209526 12/02/10 12:32  cdaq           End of Run 7779: 

  • 209525 12/02/10 12:31  cdaq           Run 7779: LED cali

  • 209524 12/02/10 12:31  saw            Beam: Beam scraping amplifier EPICS sigals added to Hall C archiver

  • 209523 12/02/10 12:23  cdaq           End of Run 7777: 

  • 209522 12/02/10 12:23  cdaq           Run 7777: LED cali

  • 209521 12/02/10 12:23  sxyang         run range summary for run # 7740 to # 7753

  • 209520 12/02/10 12:21  cdaq           End of Run 7776: 

  • 209519 12/02/10 12:19  cdaq           Run 7776: LED cali

  • 209518 12/02/10 12:11  narayan        Compton: re-installation of beam left QWAD completed

  • 209517 12/02/10 12:03  cdaq           End of Run 7775: 

  • 209516 12/02/10 12:02  cdaq           Run 7775: LED cali

  • 209515 12/02/10 11:59  cdaq           End of Run 7774: 

  • 209514 12/02/10 11:58  cdaq           Run 7774: LED cali

  • 209513 12/02/10 11:49  cdaq           End of Run 7773: 

  • 209512 12/02/10 11:49  cdaq           Run 7773: LED cali

  • 209511 12/02/10 11:40  cdaq           End of Run 7772: 

  • 209510 12/02/10 11:40  cdaq           Run 7772: LED cali

  • 209509 12/02/10 11:36  cdaq           End of Run 7771: 

  • 209508 12/02/10 11:36  cdaq           End of Run 7771: 

  • 209507 12/02/10 11:35  cdaq           Run 7771: LED cali

  • 209506 12/02/10 11:25  covrig         Target: parked the target, but 4K coolant seems unstable afterwards

  • 209505 12/02/10 11:22  cdaq           End of Run 7769: 

  • 209504 12/02/10 11:22  cdaq           Run 7769: LED cali

  • 209503 12/02/10 11:17  cdaq           End of Run 7768: 

  • 209502 12/02/10 11:15  cdaq           Run 7768: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209501 12/02/10 11:13                 Cryo filling dewars today

  • 209500 12/02/10 11:11  cdaq           End of Run 7767: 

  • 209499 12/02/10 11:10  cdaq           Run 7767: MD LED calib

  • 209498 12/02/10 11:06  sxyang         Run 7753: 1st 100K asym_bcm difference plots

  • 209497 12/02/10 11:05  cdaq           Run 7766: MD LED calib

  • 209496 12/02/10 11:02  cdaq           End of Run 7765: 

  • 209495 12/02/10 11:02  cdaq           Run 7765: MD LED calib

  • 209494 12/02/10 11:01  jhoskikns      4 K In is fluctuating a lot

  • 209493 12/02/10 10:57  cdaq           End of Run 7764: 

  • 209492 12/02/10 10:57  cdaq           Run 7764: MD LED calib

  • 209491 12/02/10 10:53  cdaq           End of Run 7763: 

  • 209490 12/02/10 10:53  cdaq           Run 7763: MD LED calib

  • 209489 12/02/10 10:50  cdaq           End of Run 7762: 

  • 209488 12/02/10 10:18  cdaq           Run 7762: Tracking DAQ test

  • 209487 12/02/10 10:07  cdaq           Run 7761: Tracking DAQ test

  • 209486 12/02/10 09:41  rob            HV GUI still misbehaving

  • 209485 12/02/10 09:39  covrig         Target: start parking the target until 5pm today

  • 209484 12/02/10 09:36  rob            main detector switched to event mode

  • 209483 12/02/10 09:33  cdaq           Run 7760: Tracking DAQ

  • 209482 12/02/10 09:27  pking          Details about the QTOR trip last night

  • 209481 12/02/10 09:16  Jiawei         Joe with other two people entered the hall to work on the QTor

  • 209480 12/02/10 09:11  jhoskins       Working on TS0 to integrate in QwBeam Modulation sequencer

  • 209479 12/02/10 09:08  Jiawei         Rob and Andy entered the hall to get the ladder for R3 main detector base changing

  • 209478 12/02/10 09:01  Jiawei         All main detector HV off

  • 209477 12/02/10 08:59  Jiawei         Late entry: Amrendra, Arshak, Vladas enetered the hall to work on the Compton electron detector

  • 209476 12/02/10 08:56  Jiawei         Han and Rakitha entered the hall  to change F1TDC

  • 209475 12/02/10 08:41  birchall       Analysis: The strange case of the displaced sine wave

  • 209474 12/02/10 08:36  cdaq           Run 7759: No beam

  • 209473 12/02/10 08:36  jhoskins       Beginning of shift target screen shot

  • 209472 12/02/10 08:34  rakithab       roc 1 rebooted

  • 209471 12/02/10 08:31  Jiawei         QTor is fixed

  • 209470 12/02/10 08:29  Pitt           Downstream lumi signal fast raster modulation 

  • 209469 12/02/10 08:27  bcade          Hall C Full (?) Survey

  • 209468 12/02/10 08:16  cdaq           End of Run 7758: 

  • 209467 12/02/10 08:07  cdaq           Beam Time Accounting

  • 209466 12/02/10 08:06  Dutta          sweep of  Hall has been completed

  • 209465 12/02/10 07:37  Dutta          Owl Shift Summary

  • 209464 12/02/10 07:18  cdaq           Run 7758: LH2, no beam, 3x3, FFB on, FF on, HWP out

  • 209463 12/02/10 07:12  Dutta          sweep begun

  • 209462 12/02/10 06:42  Pitt           Better oscilloscope shot of Downstream Lumi detector

  • 209460 12/02/10 06:39  narayan        Target: smooth behavior of target heater during BCM calibration

  • 209459 12/02/10 06:35  narayan        screen-shot of FFB status during BCM Calibration

  • 209458 12/02/10 06:30  Dutta          Run 7757: BCM calibration

  • 209457 12/02/10 06:28  cdaq           End of Run 7757: 

  • 209456 12/02/10 06:18                 Run 7755 is a pedestal run with raster OFF 

  • 209455 12/02/10 05:12  cdaq           Run 7757: LH2, 0-140 uA in steps of 20, 3x3, FFB on, FF on, HWP out

  • 209454 12/02/10 05:01  Dutta          Run 7756, is not the bCM calib. run

  • 209453 12/02/10 05:00  cdaq           End of Run 7756: 

  • 209452 12/02/10 04:59  pqwang         run7753: Helicity correlated beam current differences 

  • 209451 12/02/10 04:56  cdaq           Run 7756: LH2, 0-140 uA in steps of 20, 3x3, FFB on, FF on, HWP out

  • 209450 12/02/10 04:46  Dutta          BCM calibration

  • 209449 12/02/10 04:24  narayan        Target: pump stopped : fixed

  • 209448 12/02/10 04:07  Dutta          Escorted access for visual inspection of magnet

  • 209447 12/02/10 03:48  cdaq           End of Run 7755: 

  • 209446 12/02/10 03:31  cdaq           Run 7755: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209445 12/02/10 03:28  cdaq           End of Run 7754: 

  • 209444 12/02/10 03:07  pqwang         run7754: MD3pos pedestal has Non-Gaussian distribution

  • 209443 12/02/10 02:58  Dutta          QTOR: 480V Breaker outside the CH has not tripped

  • 209442 12/02/10 02:27  pqwang         run7753:  MD3pos problem 

  • 209441 12/02/10 02:17  narayan        Target: QTOR crash screenshot

  • 209440 12/02/10 02:10  Dutta          Escorted access to reset QTOR PS

  • 209439 12/02/10 02:01  cdaq           Run 7754: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209438 12/02/10 01:57  Dutta          QTOR crashed

  • 209437 12/02/10 01:28  Dutta          QTor has tripped

  • 209436 12/02/10 01:14  cdaq           End of Run 7753: 

  • 209435 12/02/10 00:48  Dutta          Strip chart of ffb corrector and halo rates

  • 209434 12/02/10 00:34  Dutta          Inj. run 1767 started with production run 7753

  • 209433 12/02/10 00:09  cdaq           Run 7753: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209432 12/02/10 00:07  cdaq           Beam Time Accounting

  • 209431 12/02/10 00:07  Leckey         Shift summary

  • 209430 12/02/10 00:06  cdaq           End of Run 7752:

    • Wednesday

  • 209429 12/01/10 23:57  jpan           Screenshot of GeneralTools and CAEN HV GUI

  • 209428 12/01/10 23:56  V. Tvaskis     Target: Target GUI and strip charts screenshots

  • 209427 12/01/10 23:53  jpan           Run summary for bcm position/size studies

  • 209426 12/01/10 23:48  cdaq           Run 7752: pedistal

  • 209425 12/01/10 23:47  cdaq           End of Run 7751: 

  • 209424 12/01/10 22:51  Leckey         QTOR Trip

  • 209423 12/01/10 22:50  Leckey         Injector DAQ 1766 started with run 7751

  • 209422 12/01/10 22:45  cdaq           Run 7751: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209421 12/01/10 22:35  michaelm       Hall C fast raster

  • 209420 12/01/10 22:35  Leckey         Raster Fixed

  • 209419 12/01/10 22:27  jpan           BCM1 &2 yield and Asym.  - run#7749

  • 209418 12/01/10 22:01  cdaq           End of Run 7750: 

  • 209417 12/01/10 22:00  cdaq           Run 7750: LED test

  • 209416 12/01/10 21:37  Leckey         Horizontal Raster Dead

  • 209415 12/01/10 21:12  cdaq           End of Run 7749: 

  • 209414 12/01/10 20:58  jpan           BCM double difference - run#7745 - run#7749

  • 209413 12/01/10 20:29  cdaq           Run 7749: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209412 12/01/10 20:28  cdaq           End of Run 7748: 

  • 209411 12/01/10 20:23  cdaq           Run 7748: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209410 12/01/10 20:22  cdaq           End of Run 7747: 

  • 209409 12/01/10 20:13  cdaq           Run 7747: LH2, 140uA, FFB on, FF on, HWP out 4x4 Test Flatter

  • 209408 12/01/10 20:13  Leckey         Flatter Still

  • 209407 12/01/10 20:07  cdaq           End of Run 7746: 

  • 209406 12/01/10 20:00  cdaq           Run 7746: LH2, 140uA, FFB on, FF on, HWP out 4x4 Test

  • 209405 12/01/10 19:58  cdaq           End of Run 7745: 

  • 209404 12/01/10 19:58  jpan           BPM diff_X and diff_Y plots - Run#7744

  • 209403 12/01/10 19:48  cdaq           Run 7745: LH2, 140uA, 3x3, FFB on, FF on, HWP out (flattened beam)

  • 209402 12/01/10 19:47  Leckey         Flatter beam

  • 209401 12/01/10 19:38  jpan           Oops, the BCM double difference plots are for Run#7742 and Run#7743 instead of Run#74xx

  • 209400 12/01/10 19:37  Leckey         BPMs over last 24hrs

  • 209399 12/01/10 19:31  jpan           BCM double difference - run#7744

  • 209398 12/01/10 19:24  jpan           BCM double difference - run#7443

  • 209397 12/01/10 19:16  cdaq           End of Run 7744: 

  • 209396 12/01/10 19:09  cdaq           Run 7744: LH2, 140uA, FFB on, FF on, HWP out 4x4 test

  • 209395 12/01/10 19:06  cdaq           End of Run 7743: 

  • 209394 12/01/10 19:06  cdaq           Run 7743: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209393 12/01/10 18:59  cdaq           End of Run 7742: 

  • 209392 12/01/10 18:22  jpan           BCM double difference - run#7442

  • 209390 12/01/10 18:08  Ramesh/John_   cavity work (went non-invasive)

  • 209389 12/01/10 18:04  buddhini       Started injector run 1765 in parallel with parity run 7742

  • 209388 12/01/10 18:04  jhlee          a cronjob on injector DAQ

  • 209387 12/01/10 17:58  cdaq           Run 7742: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209386 12/01/10 17:52  jpan           MD allbar Asym., bcm1-2 DD - Run7741

  • 209385 12/01/10 17:15  Page / King    Shift Summary: Important instructions for shift leaders

  • 209384 12/01/10 17:11  Page / King    Plan for Weds Swing, Thursday Owl and Day shifts

  • 209383 12/01/10 17:09  jhlee/buddhi   make a room for the injector DAQ

  • 209382 12/01/10 17:03  cdaq           Run 7741: LH2, 140uA, 3x3, FFB on, FF on, HWP out BEAM STEERING

  • 209381 12/01/10 16:56  jpan           MD allbar Asym. and MD yield FFT - Run7740

  • 209380 12/01/10 16:53  cdaq           End of Run 7740: 

  • 209379 12/01/10 16:42  jpan           Run range summary for Run#7725 to Run#7740 (day shift)

  • 209378 12/01/10 16:18  cdaq           Beam Time Accounting

  • 209377 12/01/10 16:11  mgericke       Shift Summary: Shift summary

  • 209376 12/01/10 16:09  cdaq           Run 7740: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209375 12/01/10 15:58  mgericke       Shift Summary: Shift summary

  • 209374 12/01/10 15:50  Adesh          General tools, HV, halo rates & misc striptools screenshot

  • 209373 12/01/10 15:37  mgericke       Run 7738 asymmetry width

  • 209372 12/01/10 15:34  rakithab       Target: 15K supply temp (QWT_15K_Supply_T_Tgt) suddenly increased. Now normal

  • 209371 12/01/10 15:22  Adesh          Analysis: Run 7738: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209370 12/01/10 15:15  cdaq           Run 7739: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209369 12/01/10 15:14  cdaq           Compton End of Run 20408: 

  • 209368 12/01/10 15:13  cdaq           Compton Run 20408: Beam striaght through, 140 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209367 12/01/10 15:12  cdaq           End of Run 7738: 

  • 209366 12/01/10 15:12  cdaq           Compton End of Run 20407: 

  • 209365 12/01/10 15:11  cdaq           Compton Run 20407: Beam striaght through, 140 uA, 1600 V, laser toggling, accum ped/thresholds 3790/3740/3690

  • 209364 12/01/10 15:04  cdaq           Run 7738: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209363 12/01/10 15:02  cdaq           End of Run 7737: 

  • 209362 12/01/10 14:24  mgericke       Run 7737 MD FFTs quite clean

  • 209361 12/01/10 14:20  Adesh          Analysis: Run 7737: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209360 12/01/10 13:56  cdaq           Run 7737: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209359 12/01/10 13:54  mgericke       Escorded access to reset QTOR PS

  • 209358 12/01/10 13:53  cdaq           End of Run 7736: 

  • 209357 12/01/10 13:46  jhlee          Run 7736 is the right pedestal run.

  • 209356 12/01/10 13:33  cdaq           Run 7736: test 

  • 209355 12/01/10 13:26  mgericke       Run 7735 Correction: This is a pedestal run !

  • 209354 12/01/10 13:25  mgericke       Source of double peaking identified

  • 209353 12/01/10 13:18  cdaq           Run 7735: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209352 12/01/10 13:11  cdaq           End of Run 7734: 

  • 209351 12/01/10 13:08  Adesh          Analysis: Run 7732: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209350 12/01/10 13:04  cdaq           Run 7734: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209349 12/01/10 12:56  cdaq           End of Run 7733: 

  • 209348 12/01/10 12:48  cdaq           Run 7733: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209347 12/01/10 12:46  cdaq           End of Run 7732: 

  • 209346 12/01/10 12:19  Adesh          Analysis: Run 7732: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209345 12/01/10 12:05  gaskell        Beam:orbit has changed significantly

  • 209343 12/01/10 11:54  cdaq           Run 7732: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209342 12/01/10 11:52  mgericke       beam changes after bypassing compton chicane

  • 209341 12/01/10 11:51  cdaq           End of Run 7731: 

  • 209340 12/01/10 11:43  Ramesh         bcm6 reading back to normal

  • 209339 12/01/10 11:16  Adesh          Analysis: Run 7731: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209338 12/01/10 11:06                 Beam: Turned OFF the Accelerator Beam Scraping Monitors after Run 7728 - more info

  • 209337 12/01/10 10:56  Adesh          Analysis: Run 7730: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209336 12/01/10 10:51  cdaq           Run 7731: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209335 12/01/10 10:50  cdaq           End of Run 7730: 

  • 209334 12/01/10 10:45  Adesh          Analysis: Run 7729: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209333 12/01/10 10:40  Ramesh         bcm6 gain in "current" only changed

  • 209332 12/01/10 10:34  cdaq           Run 7730: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209331 12/01/10 10:34  cdaq           End of Run 7729: 

  • 209330 12/01/10 10:18  Adesh          Analysis: Run 7728: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209329 12/01/10 10:11  cdaq           Run 7729: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209328 12/01/10 10:03  Adesh          Analysis: Run 7726: 1st 100K events MD Yield FFT, asym_qwk_md all, asym_bcm difference & diff_bpm Y plots

  • 209327 12/01/10 10:00  suleiman       Beam: Turned OFF the Accelerator Beam Scraping Monitors after Run 7728.

  • 209326 12/01/10 09:55  cdaq           End of Run 7728: 

  • 209325 12/01/10 09:49  saw            Qtor OK to leave as is for now

  • 209324 12/01/10 09:48  Adesh          Target: Late entry: Target horizontal motion analog ouput reading in the counting room.

  • 209323 12/01/10 09:42  cdaq           Run 7728: LH2, 140uA, 3x3, FFB on, FF on, HWP out

  • 209322 12/01/10 09:42  rakithab       Target: Target position in Xpot did not give the correct OutOfBeam position

  • 209321 12/01/10 09:37  cdaq           Run 7727: LH2, 140uA, 3x3, FFB on, FF on

  • 209320 12/01/10 09:34  A              Analysis: Run 7725: 1st 100K events asym_qwk_mdall   & asym_bcm difference plots

  • 209319 12/01/10 09:32  mgericke       Beam retuned

  • 209318 12/01/10 09:29  rakithab       Target: Moved to LH2 Target 

  • 209317 12/01/10 09:12  Adesh          Analysis: Run 7725: 1st 100K events MD  Yield FFT & diff_bpm plots

  • 209316 12/01/10 09:05  rakithab       Target: Target Moved Out of Beam

  • 209315 12/01/10 09:00  gaskell        Compton: beam out of chicane

  • 209314 12/01/10 08:53  mgericke       Stopped run for reconfig ....

  • 209313 12/01/10 08:52  cdaq           End of Run 7726: 

  • 209312 12/01/10 08:39  mgericke       Taking the HWP OUT at 8:50 am

  • 209311 12/01/10 08:30  cdaq           Run 7726: LH2, 140uA, 3x3, FFB on, FF on

  • 209310 12/01/10 08:29  cdaq           End of Run 7725: 

  • 209308 12/01/10 08:10  rakithab       Target: Target GUI and strip charts screenshots

  • 209307 12/01/10 08:03  cdaq           Beam Time Accounting

  • 209306 12/01/10 08:02  Dutta          Owl Shift Summary

  • 209305 12/01/10 07:46  Dutta          MCC phone are working now

  • 209304 12/01/10 07:36  pqwang         summary of run7717 - 7724

  • 209303 12/01/10 07:36  cdaq           Run 7725: LH2, 140uA, 3x3, FFB on, FF on

  • 209302 12/01/10 07:35  cdaq           End of Run 7724: 

  • 209301 12/01/10 07:32  Dutta          MCC phones are down: call 630-7050 

  • 209300 12/01/10 07:16  narayan        Target: HPH going below low limit

  • 209299 12/01/10 07:12  pqwang         Screenshot of GeneralTools & HV GUI

  • 209298 12/01/10 07:06  pqwang         How a fake asymmetry value was created

  • 209297 12/01/10 06:34  Dutta          QTOR: decided not to reboot control computer

  • 209296 12/01/10 06:20  Dutta          QTor setpoint readback error

  • 209295 12/01/10 06:13  narayan        Target: mid-shift target screen-shot

  • 209294 12/01/10 06:11  cdaq           Run 7724: LH2, 140uA, 3x3, FFB on, FF on

  • 209293 12/01/10 06:10  cdaq           End of Run 7723: 

  • 209292 12/01/10 05:18  pqwang         run7721: all bar asym. & bcm double diff. plot

  • 209291 12/01/10 05:18  cdaq           Run 7723: LH2, 140uA, 3x3, FFB on, FF on

  • 209290 12/01/10 05:15  cdaq           End of Run 7722: 

  • 209289 12/01/10 04:58  pqwang         Run7720: Asym plots

  • 209288 12/01/10 04:56  Dutta          Compton scintillator HV reset

  • 209287 12/01/10 04:30  Dutta          Halo rates normal

  • 209286 12/01/10 04:27  Dutta          Compton scintillators have tripped

  • 209285 12/01/10 04:21  cdaq           Run 7722: LH2, 140uA, 3x3, FFB on, FF on

  • 209284 12/01/10 04:20  cdaq           End of Run 7721: 

  • 209283 12/01/10 03:40  Dutta          Halo rates normal

  • 209282 12/01/10 03:28  cdaq           Run 7721: LH2, 140uA, 3x3, FFB on, FF on

  • 209281 12/01/10 03:26  cdaq           End of Run 7720: 

  • 209280 12/01/10 03:22  Dutta          Injector DAQ not running

  • 209279 12/01/10 03:18  pqwang         run7719: first100k events show a strong noise pick-up

  • 209278 12/01/10 02:28  cdaq           Run 7720: LH2, 140uA, 3x3, FFB on, FF on

  • 209277 12/01/10 02:25  cdaq           End of Run 7719: 

  • 209276 12/01/10 01:24  cdaq           Run 7719: LH2, 140uA, 3x3, FFB on, FF on

  • 209275 12/01/10 01:20  pqwang         run7718: MD asym & PMT yield FFT

  • 209274 12/01/10 01:18  cdaq           End of Run 7718: 

  • 209273 12/01/10 00:14  V. Tvaskis     Target: Target GUI and strip charts screenshots

  • 209272 12/01/10 00:14  wdconinc       Compton: bg rates

  • 209271 12/01/10 00:08  cdaq           Beam Time Accounting

  • 209270 12/01/10 00:05  cdaq           Run 7718: LH2, 140uA, 3x3, FFB on, FF on

  • 209269 12/01/10 00:04  cdaq           End of Run 7717: 

  • 209268 12/01/10 00:04  W. Deconinck   Swing shift summary

    


    



Search this logbook: 

[How to search]

    

    
This file generated by /group/hallc/www/hallcweb/apps/logbooks/hclog/src/hclogscript version HC2.21
    

    If you have any comments or problems, please contact:
    
Stephen A. Wood
    
saw@jlab.org
    
(757) 269-7367