Jefferson Lab Hall C Logbook for May 11 - runstarts omitted
Main INDEX
Tuesday
233512 05/31/11 14:27 beaufait large moller quad
Monday
233511 05/30/11 14:11 leacock turned off target controls computer monitors
Friday
233510 05/27/11 13:39 brads VDC gas flow switchover defered to Friday, June 3
233509 05/27/11 13:27 brads VDC gas flow will be switched to Argon on Tuesday, May 31
Wednesday
233508 05/25/11 18:16 Pitt HDC Fast OR scaler rates compared to scope
233507 05/25/11 18:10 Pitt HDC "IN" leakage/FOR at 2300 V
233506 05/25/11 18:08 Pitt HDC "IN" leakage/FOR at 2250 V
233505 05/25/11 18:07 Pitt HDC "IN" Leakage/FOR for 2200 V
233504 05/25/11 18:06 Pitt HDC "IN" leakage/FOR at 2150 V
233503 05/25/11 18:04 Pitt HDC "IN" leakage/FOR at 2100 V
233502 05/25/11 18:03 Pitt HDC "IN" leakage/FOR at 2050 V
233501 05/25/11 18:02 Pitt HDC "IN" leakage/FOR at 2000 V
233500 05/25/11 18:00 Pitt HDC "IN" leakage/FOR at 1900 V
233499 05/25/11 17:59 Pitt HDC "IN" leakage/FOR at 1800 V
233498 05/25/11 17:58 Pitt HDC "IN" leakage/FOR at 1700 V
233497 05/25/11 17:56 Pitt HDC "IN" leakage/FOR at 1600 V
233496 05/25/11 17:54 Pitt HDC "IN" leakage/FOR at 1500 V
233495 05/25/11 17:49 Pitt Region 2 leakage/FOR rates for IN position
233494 05/25/11 16:16 saw ADC moved from vmec18 to vmec1
233493 05/25/11 14:53 Pitt HDC "OUT" leakage/FOR at 2300 V
233492 05/25/11 14:51 Pitt HDC 2250 V with pictures
233491 05/25/11 14:50 Pitt HDC "OUT" leakage/FOR at 2250 V
233490 05/25/11 14:49 Pitt HDC "OUT" leakage/FOR at 2200 V
233489 05/25/11 14:48 brads UPS in the gas shed needs a replacement battery
233488 05/25/11 14:47 Pitt HDC "OUT" leakage/FOR at 2150 V
233487 05/25/11 14:46 Pitt HDC "OUT" leakage/FOR at 2100 V
233486 05/25/11 14:44 Pitt HDC "OUT" leakage/FOR at 2050 V
233485 05/25/11 14:43 Pitt HDC "OUT" leakage/FOR rates at 2000 V
233484 05/25/11 14:41 Pitt HDC "OUT" leakage/FOR at 1900 V
233483 05/25/11 14:40 Pitt HDC "OUT" Leakage/FOR at 1800 V
233482 05/25/11 14:37 Pitt HDC Leakage/FOR at 1600 V
233481 05/25/11 14:36 Pitt HDC "OUT" Leakage/FOR at 1500 V
233480 05/25/11 14:32 Pitt Region 2 leakage current and Fast OR rates for OUT position
233479 05/25/11 14:30 Pitt Radiation levels at selected points in Region 2
233478 05/25/11 11:24 jhlee Re:Run 10647: LH2 HK2 10V threshold VDC 3500V HV octant 1+5 QTOR 8921A
Tuesday
233477 05/24/11 20:16 Pitt RADCON survey results from 5/20/2011
233476 05/24/11 18:34 armd vmec18 and VDC thresholds
233475 05/24/11 15:55 beaufait Target: target camera
233474 05/24/11 14:41 saw Qtor Hall Probe moved to vmec1
233472 05/24/11 11:49 brads re: UPS alarm in Hall C CH electronics room (powers IOCHLCBPM2) -- fixed
233471 05/24/11 11:47 brads gas flowing again
233470 05/24/11 10:42 covrig Target: recover from power outage
233469 05/24/11 09:21 brads gas flow tripped off sometime between noon yesterday and this morning
Monday
233468 05/23/11 16:44 brads ccompl2 is back down...
233467 05/23/11 16:33 brads ccomptl2 back up
233466 05/23/11 15:51 brads UPS alarm in Hall C CH electronics room (powers IOCHLCBPM2)
233465 05/23/11 11:30 Leckey R3 Covered and Parked for Summer
233464 05/23/11 10:05 brads cdaq computers back up, except for ccomptl2
233463 05/23/11 10:00 brads Gas flow back up as Ar:Ethane
Friday
233462 05/20/11 18:41 brads Gas flow to chambers will be interrupted over the weekend
233461 05/20/11 18:39 jhlee remove very old raw CODA files on cdaql6 local disk
233460 05/20/11 17:46 saw Hall C EPICS Archiver shutdown and restarted
233459 05/20/11 17:26 brads Hall C Computers will be shut down over the weekend
233458 05/20/11 16:24 mack Removed rad badges from MD focal plane
233457 05/20/11 16:16 pking Database server on cdaql6 is being worked on.
233456 05/20/11 15:52 Ramesh Analysis: result of the test run 12102 for bcm5,6 (with input signals from bcm1,2)
233455 05/20/11 15:47 jhlee several IOC crates are off
233454 05/20/11 14:34 gaskell Compton: turned off a lot of stuff
233453 05/20/11 14:18 jhlee updated JDK on cdaql4
233452 05/20/11 12:33 jhlee installation of afecs_v131b8 on cdaql4
233451 05/20/11 11:02 Pitt Region 2 RADCON survey information from May 18, 2011
233450 05/20/11 09:49 Pitt HDC leakage currents; 9:30 AM on 5/20/2011
Thursday
233449 05/19/11 21:55 brads cdaqlX machines will probably be shut off over the weekend
233448 05/19/11 18:09 jhlee a tweak for the injector DAQ
233447 05/19/11 18:00 leacock W plug test notes
Wednesday
233446 05/18/11 17:47 jhlee current working boot parameter on g0inj
233445 05/18/11 17:13 jhlee turn off the Parity ROCs and Tracking ROCs, and start to migrate the injector DAQ into cdaq cluster
233444 05/18/11 16:01 beaufait Large quad local controls are back up.
233443 05/18/11 15:36 beaufait g2p supplies disconnected and ready for removal.
233442 05/18/11 14:58 brads cdaql3 is back up
233441 05/18/11 13:39 leacock Region 2 HDC leakage currents at 13:35, 18 May 2011
233440 05/18/11 10:40 brads cdaql3 will be rebooted at 2pm, Wednesday (today)
Tuesday
233439 05/17/11 15:43 Pitt Region 2 RADCON survey information
233438 05/17/11 15:30 Pitt Region 2 HDC leakage currents at 15:20 on 5/17/2011
233437 05/17/11 10:47 beaufait power supply work
233436 05/17/11 10:47 Leckey VDC Mad Card Activated
Monday
233435 05/16/11 16:38 rob removed remaining six dosimeters from cable tray
233434 05/16/11 15:38 smithg,Silvi Target: Inerted loop with helium, moved to 4% US Al dummy
233433 05/16/11 13:03 Leckey VDC MAD Card Replaced
233432 05/16/11 11:01 saw Hall C Epics Archiver shutdown and restart on Wednesday
Sunday
233431 05/15/11 16:56 Pitt Region 2 HDC leakage currents - May 15, 16:30 - missing plot
233430 05/15/11 16:51 Pitt Region 2 HDC leakage currents - May 15, 16:30
233429 05/15/11 16:17 Pitt Region 2 HDC leakage currents - May 14, 15:00
Saturday
233428 05/14/11 19:04 dunne Final "as found" run plan calendar for last 10 days
Friday
233427 05/13/11 14:38 leacock HDC HV and current readouts at 1436 on 13 May 2011
233426 05/13/11 11:26 brads power-cycled hallc-cat2950 network switch in Hall
233425 05/13/11 11:00 saw Qtor trip data
233424 05/13/11 10:53 brads re: firefox is not working on cdaql3 -- fixed
233422 05/13/11 10:31 beaufait lcw shutdown
233421 05/13/11 10:11 smithg Target: checked tgt in hall
233420 05/13/11 10:06 covrig, smit Target: warming up
233419 05/13/11 09:52 gaskell Moller: warmup
233418 05/13/11 09:44 gaskell Compton: laser off, interlock disabled
233417 05/13/11 09:43 gaskell Compton: flippers removed from laser table
233416 05/13/11 08:08 narayan Compton: withdrawing for shutdown
233415 05/13/11 08:07 Armstrong Leave VDC and HDC gas flowing for now
233414 05/13/11 08:07 cdaq Beam Time Accounting
233412 05/13/11 08:02 rajotte Shift Summary: Owl shift summary
233411 05/13/11 08:00 gaskell Compton: Stuck flipper
233410 05/13/11 07:50 rajotte late entry: Qtor and HV are OFF
233409 05/13/11 07:42 narayan Compton: eDet HV turned off
233408 05/13/11 07:33 manos Target: Raster current alarm
233407 05/13/11 07:11 cdaq Run 12163 Pedestal Data
233403 05/13/11 07:02 rajotte Beam OFF for six months
233402 05/13/11 06:59 manos Compton: No power in cavity
233399 05/13/11 06:27 manos Target: Screenshots
233398 05/13/11 06:18 qwanalysis Analysis: Run 12162 - Plots and Summary Table for 100k Events.
233391 05/13/11 05:35 manos Electron detector communication error
233388 05/13/11 05:03 qwanalysis Analysis: Run 12161 - Plots and Summary Table for 100k Events.
233385 05/13/11 04:43 manos Compton: Turned off photon detector HV
233383 05/13/11 04:22 manos Compton: No power in cavity? And e-det moved in BEAM position
233381 05/13/11 03:55 rajotte Weird shape of detector yield (after beam down)
233380 05/13/11 03:50 qwanalysis Analysis: Run 12160 - Plots and Summary Table for 100k Events.
233379 05/13/11 03:44 rajotte Qtor trip and reset
233372 05/13/11 02:27 qwanalysis Analysis: Run 12159 - Plots and Summary Table for 100k Events.
233367 05/13/11 01:37 manos Big charge asymmetry width, small scintillator and halo rates
233366 05/13/11 01:24 qwanalysis Analysis: Run 12158 - Plots and Summary Table for 100k Events.
233364 05/13/11 01:12 qwanalysis Analysis: Run 12157 - Plots and Summary Table for 100k Events.
233361 05/13/11 00:59 rajotte HWP IN -> OUT
233359 05/13/11 00:52 cdaq Run 12156 Pedestal Data
233354 05/13/11 00:38 manos HAL 9000 reminded us to check Compton run
233352 05/13/11 00:27 vardan General Tools and HV GUI snapshots
233350 05/13/11 00:22 cdaq Beam Time Accounting
233349 05/13/11 00:21 vardan Shift Summary: swing shift summary
233348 05/13/11 00:17 manos Bellows temp for new trajectory good at 150uA
233347 05/13/11 00:13 sxyang Target GUI and strip charts screenshots at start of swing shift
233346 05/13/11 00:08 qwanalysis Analysis: Run 12155 - Plots and Summary Table for 100k Events.
Thursday
233344 05/12/11 23:44 rob set points during adc saturation test
233343 05/12/11 23:34 rob set points during Faraday cup calibration
233342 05/12/11 23:28 rob tee removed
233339 05/12/11 23:03 rob md6+ tee'd to DVM at ADC input
233331 05/12/11 22:33 rob reduced beam current for "jim's test"
233330 05/12/11 21:58 qwanalysis Analysis: Run 12152 - Plots and Summary Table for 100k Events.
233329 05/12/11 21:51 Ramesh bcm5,6 study with bcm2 signal as their input
233328 05/12/11 21:46 vardan in preparation fos Jim's test run
233327 05/12/11 21:41 mack installed rad badges on MD focal plane, etc.
233326 05/12/11 21:41 sxyang changed the heater compensation bcm back to bcm2
233324 05/12/11 21:25 qwanalysis Analysis: Run 12151 - Plots and Summary Table for 100k Events.
233323 05/12/11 21:23 qwanalysis Analysis: Run 12150 - Plots and Summary Table for 100k Events.
233321 05/12/11 21:12 Pitt Spreadsheet of lumi neutral axis results
233318 05/12/11 21:04 vardan 180 uA on LH2 target for BCM5 studies
233316 05/12/11 20:58 vardan hall was in control access from 8PM to 8:35PM.
233312 05/12/11 20:07 qwanalysis Analysis: Run 12149 - Plots and Summary Table for 100k Events.
233310 05/12/11 19:44 qwanalysis Analysis: Run 12148 - Plots and Summary Table for 100k Events.
233308 05/12/11 19:39 qwanalysis Analysis: Run 12147 - Plots and Summary Table for 100k Events.
233305 05/12/11 19:37 leacock bellows temps for "flat" and "golden"
233304 05/12/11 19:36 leacock stable bellows temps for "flat" and "golden"
233302 05/12/11 19:33 qwanalysis Analysis: Run 12146 - Plots and Summary Table for 100k Events.
233299 05/12/11 19:29 leacock stable bellows temps at flat trajectory
233298 05/12/11 19:27 qwanalysis Analysis: Run 12145 - Plots and Summary Table for 100k Events.
233293 05/12/11 19:19 qwanalysis Analysis: Run 12144 - Plots and Summary Table for 100k Events.
233289 05/12/11 19:13 qwanalysis Analysis: Run 12143 - Plots and Summary Table for 100k Events.
233287 05/12/11 19:10 leacock bellows temps at bpm val 7
233282 05/12/11 19:00 qwanalysis Analysis: Run 12141 - Plots and Summary Table for 100k Events.
233280 05/12/11 18:55 qwanalysis Analysis: Run 12140 - Plots and Summary Table for 100k Events.
233278 05/12/11 18:49 leacock bellows temps over time (beam angle)
233276 05/12/11 18:46 qwanalysis Analysis: Run 12139 - Plots and Summary Table for 100k Events.
233273 05/12/11 18:40 qwanalysis Analysis: Run 12138 - Plots and Summary Table for 100k Events.
233268 05/12/11 18:27 qwanalysis Analysis: Run 12137 - Plots and Summary Table for 100k Events.
233267 05/12/11 18:26 leacock bellows temps bpm val 2
233265 05/12/11 18:22 leacock temp variations during a trip flat trajectory
233264 05/12/11 18:17 leacock bellows and W plug temps 150uA "flat" bpm value 1
233262 05/12/11 18:11 qwanalysis Analysis: Run 12136 - Plots and Summary Table for 100k Events.
233261 05/12/11 18:10 qwanalysis Analysis: Run 12135 - Plots and Summary Table for 100k Events.
233260 05/12/11 18:04 qwanalysis Analysis: Run 12134 - Plots and Summary Table for 100k Events.
233255 05/12/11 17:52 kamyers Update to beamline bkgd studies notes
233254 05/12/11 17:52 qwanalysis Analysis: Run 12133 - Plots and Summary Table for 100k Events.
233252 05/12/11 17:48 brads re: firefox is not working on cdaql3 (works for me)
233250 05/12/11 17:45 qwanalysis Analysis: Run 12132 - Plots and Summary Table for 100k Events.
233248 05/12/11 17:42 qwanalysis Analysis: Run 12131 - Plots and Summary Table for 100k Events.
233247 05/12/11 17:41 smithg Target: last night's power densities
233244 05/12/11 17:35 Armstrong the BCM5/6 test is invasive
233243 05/12/11 17:34 qwanalysis Analysis: Run 12130 - Plots and Summary Table for 100k Events.
233239 05/12/11 17:26 qwanalysis Analysis: Run 12129 - Plots and Summary Table for 100k Events.
233237 05/12/11 17:24 sxyang firefox is not working on cdaql3
233235 05/12/11 17:20 qwanalysis Analysis: Run 12128 - Plots and Summary Table for 100k Events.
233230 05/12/11 17:07 qwanalysis Analysis: Run 12126 - Plots and Summary Table for 100k Events.
233228 05/12/11 16:50 benesch Beam: better screen captures for dispersive optics
233225 05/12/11 16:48 leacock ramp rate changed from 1uA/s to 5uA/s
233224 05/12/11 16:42 leacock bellows temps and W plug temp diff with "flat" trajectory
233222 05/12/11 16:30 sxyang change the heater compensation bcm
233221 05/12/11 16:25 rakithab CAEN HV setting and general tools snapshots
233220 05/12/11 16:11 cdaq Run 12125 Pedestal Data
233219 05/12/11 16:08 rakithab Shift Summary: Day Shift summary
233218 05/12/11 16:07 cdaq Beam Time Accounting
233214 05/12/11 15:53 Pitt Lumi neutral axis study plan - modifications
233213 05/12/11 15:52 leacock Y 6mm to 7mm (negative corrector)
233212 05/12/11 15:40 leacock halo rates as we move the beam on the plug in Y
233211 05/12/11 15:36 leacock corrector +2800 in Y ~7mm offset. we are hitting the plug
233209 05/12/11 15:25 cdaq Run 12123 Pedestal Data
233208 05/12/11 15:20 kamyers Analysis: recreated missing pedestal files
233205 05/12/11 15:18 benesch Beam: beam during energy measurement and early this afternoon.
233204 05/12/11 15:16 leacock current doubled while we were doing the W plug test
233202 05/12/11 15:11 Ramesh plan for bcm5,6 test using bcm2 signal
233201 05/12/11 15:02 cdaq Run 12121 Pedestal Data
233200 05/12/11 14:49 leacock we are hitting the plug at +6mm
233198 05/12/11 14:34 leacock screenshot orbit lock OFF
233197 05/12/11 14:33 leacock screenshot at the start of the W plug test
233196 05/12/11 14:31 saw Beam: Followup to diffuser chiller water issue
233193 05/12/11 14:24 Pitt/Leacock Test plan for "lumi neutral axis study"
233192 05/12/11 14:20 rakithab Analysis: Moller Polarization Results
233191 05/12/11 13:28 rakithab Moller backout
233184 05/12/11 12:23 gaskell FlipPC output
233175 05/12/11 11:28 gaskell Hall leader authorizes running until tomorrow
233174 05/12/11 11:07 gaskell added water to dump diffuser chiller
233173 05/12/11 10:58 rakithab Beam Dump diffuser FSD trip cleared after filled up chiller with more water
233172 05/12/11 10:14 rakithab Beam Dump diffuser FSD trip. Request Controlled Access and Ran-con support.
233171 05/12/11 09:47 gaskell Duration of CW beam on LH2 with no raster
233170 05/12/11 09:41 pking Analysis: Who removed the two missing pedestal ranges for MD and lumi?
233169 05/12/11 09:26 Jiawei Target: correct attachment
233167 05/12/11 09:19 Jiawei Target: target is out of beam for the moller measurement
233166 05/12/11 09:17 rakithab Moller Set-up
233165 05/12/11 09:10 rakithab Injector parameters before Moller
233164 05/12/11 09:03 rakithab BMod OFF for the moller
233162 05/12/11 08:40 rakithab Turned ON Beam Modulation
233161 05/12/11 08:23 Jiawei Target: Screen shots at the beginning of day shift
233160 05/12/11 08:11 qwanalysis Analysis: Run 12120 - Plots and Summary Table for 100k Events.
233159 05/12/11 08:05 cdaq Beam Time Accounting
233158 05/12/11 08:03 rajotte Shift Summary: OWL Shift Summary
233155 05/12/11 07:47 Mitra Target screens snapshot
233152 05/12/11 07:20 Armstrong Beam: Late entry - energy measurement results
233151 05/12/11 07:12 rajotte general tools & HV
233150 05/12/11 07:07 qwanalysis Analysis: Run 12119 - Plots and Summary Table for 100k Events.
233145 05/12/11 06:14 qwanalysis Analysis: Run 12118 - Plots and Summary Table for 100k Events.
233143 05/12/11 05:52 cdaq Run 12117 Pedestal Data
233138 05/12/11 05:08 qwanalysis Analysis: Run 12116 - Plots and Summary Table for 100k Events.
233137 05/12/11 04:56 qwanalysis Analysis: Run 12115 - Plots and Summary Table for 100k Events.
233134 05/12/11 04:49 Mitra Target screens snapshot
233133 05/12/11 04:45 rajotte HWP IN -> OUT
233129 05/12/11 04:38 Mitra HV Controls snapshot
233128 05/12/11 04:37 Mitra General Tools snapshot
233127 05/12/11 04:01 qwanalysis Analysis: Run 12114 - Plots and Summary Table for 100k Events.
233122 05/12/11 03:29 qwanalysis Analysis: Run 12113 - Plots and Summary Table for 100k Events.
233116 05/12/11 02:00 qwanalysis Analysis: Run 12112 - Plots and Summary Table for 100k Events.
233115 05/12/11 01:57 rajotte general tools & HV
233114 05/12/11 01:47 rajotte Beam back after requested harp scan
233112 05/12/11 01:38 rajotte Moving e-detector back in
233110 05/12/11 00:46 narayan Shift Summary: Swing Shift Summary
233109 05/12/11 00:44 rajotte Requesting harp scan to MCC
233108 05/12/11 00:29 qwanalysis Analysis: Run 12111 - Plots and Summary Table for 100k Events.
233107 05/12/11 00:14 jhoskins restarted TS0 and CODA
233105 05/12/11 00:08 jhoskins EPICS communication error
233104 05/12/11 00:07 cdaq Beam Time Accounting
233103 05/12/11 00:06 smithg Target: Listen to your alarms. Use your heads!
Wednesday
233101 05/11/11 23:56 pking Analysis: Raster QDC channels were not decoded properly in creating these plots
233098 05/11/11 23:33 smithg Target: never EVER put unrastered beam on the LH2 target!
233097 05/11/11 23:31 pking Analysis: Found problem with raster channel map; reverted to the 1.08rc3 version of the raster channel map
233096 05/11/11 23:26 jhoskins FYI bmod was on during E-measurement
233095 05/11/11 23:23 qwanalysis Analysis: Run 12107 - Plots and Summary Table for 100k Events.
233094 05/11/11 23:21 jhoskins Starting bmod phase space test
233092 05/11/11 23:16 narayan temperatures during Swing shift
233091 05/11/11 23:09 jhlee reboot vmec18 due to caget error
233090 05/11/11 22:54 vardan Target: 5uA unrasterd beam
233089 05/11/11 22:19 narayan shift checklist snapshot
233088 05/11/11 22:18 vardan Target: low raster current alarm
233087 05/11/11 22:18 narayan Compton: phDet HV turned off during energy measurement
233084 05/11/11 22:10 narayan Status: Energy Measurement underway
233083 05/11/11 22:06 vardan Target: correction: not modulation but compensation
233077 05/11/11 21:38 narayan Target: temporarily increased hihi limit on beam current
233072 05/11/11 20:29 qwanalysis Analysis: Run 12106 - Plots and Summary Table for 100k Events.
233071 05/11/11 20:18 narayan Compton: edet lowered to 'BEAM' again
233067 05/11/11 19:36 Jiawei back out the raster frequency test
233066 05/11/11 19:19 cdaq Raster Map and BPMs : Run 12105, event range 175000 - 195000
233063 05/11/11 18:57 Jiawei Turn on the scanner HV to do the raster map for Paul's test
233062 05/11/11 18:53 Jiawei start doing Paul's raster frequency test
233061 05/11/11 18:45 qwanalysis Analysis: Run 12104 - Plots and Summary Table for 100k Events.
233060 05/11/11 18:45 donjones Compton: HV set to 1600V
233058 05/11/11 18:41 narayan charge feedback found off
233056 05/11/11 18:30 vardan Target: beam current limits zeroed
233055 05/11/11 18:27 vardan Target: beam current alarm
233054 05/11/11 18:25 Ramesh bcm1,2 signals into bcm5,6 test: entry 1
233053 05/11/11 18:21 Jiawei redo the target boiling test by changing the raster size at 180muA (BCM1)
233051 05/11/11 18:11 vardan Target: HBH beam modulation enabled
233039 05/11/11 17:25 vardan Target: on the HPH beam compensation on/off procedure
233037 05/11/11 17:10 cdaq Beam Time Accounting
233036 05/11/11 17:10 pking Test plan: Modify raster frequencies to give more uniform coverage of the raster square
233033 05/11/11 17:06 Mack/Jiawei start the bcm 1/2 and 5/6 swap test
233031 05/11/11 17:01 vardan Target: HPH beam compensation off
233030 05/11/11 16:55 beaufait qtor reset
233029 05/11/11 16:51 narayan Status: QTOR ramping up finally, coming out of Controlled access
233028 05/11/11 16:32 vardan Target: GUI and strip charts screenshots at the start of swing shift
233027 05/11/11 16:20 sxyang day shift summary
233025 05/11/11 15:32 Jiawei QTor Tripped
233023 05/11/11 14:57 qwanalysis Analysis: Run 12097 - Plots and Summary Table for 100k Events.
233022 05/11/11 14:56 Jiawei switched the 2nd part of the 480Hz test to raster size scan at 960Hz
233021 05/11/11 14:49 Jiawei late entry: everything set back to normal 960Hz setup
233019 05/11/11 14:39 Armstrong Compton: end run, Event Builder crash....
233018 05/11/11 14:28 Jiawei helicity board back to 960Hz
233016 05/11/11 14:24 kamyers Notes from beamline bkgd studies
233009 05/11/11 13:44 qwanalysis Analysis: Run 12095 - Plots and Summary Table for 100k Events.
233007 05/11/11 13:28 sxyang screenshots of general tools and hv guis
233006 05/11/11 13:25 sxyang beam might be off for some time
233005 05/11/11 13:24 Jiawei run 12094 is junk
233002 05/11/11 13:17 Armstrong More on beam quality
233001 05/11/11 13:02 Jiawei MCC has some vacuum valve problem, we are waiting for the beam back to finish the test
233000 05/11/11 13:01 donjones Compton: beam off rates linked to Hall A mode
232999 05/11/11 12:52 qwanalysis Analysis: Run 12092 - Plots and Summary Table for 100k Events.
232997 05/11/11 12:42 qwanalysis Analysis: Run 12091 - Plots and Summary Table for 100k Events.
232994 05/11/11 12:38 qwanalysis Analysis: Run 12090 - Plots and Summary Table for 100k Events.
232991 05/11/11 12:31 qwanalysis Analysis: Run 12089 - Plots and Summary Table for 100k Events.
232990 05/11/11 12:30 Armstrong Beam quality much improved
232983 05/11/11 12:09 Jiawei run 12087 is junk.
232982 05/11/11 12:08 Adesh Snapshot of Helicity Control Board
232978 05/11/11 12:04 Jiawei start the 480Hz target boiling test
232976 05/11/11 11:29 paschke Analysis: Detector widths at 180 uA
232975 05/11/11 11:20 Armstrong Beam back; charge asynnetry width better
232974 05/11/11 11:18 qwanalysis Analysis: Run 12086 - Plots and Summary Table for 100k Events.
232970 05/11/11 10:51 sxyang beam is back
232968 05/11/11 10:26 Armstrong still a while for beam back
232967 05/11/11 10:24 covrig Target: I, gremlin
232966 05/11/11 10:05 Armstrong Target: someone changed 15 K J/T?
232964 05/11/11 09:48 Armstrong more on beam quality
232963 05/11/11 09:37 Armstrong Link to entry by Jay
232962 05/11/11 09:28 Armstrong correction re: injector run
232961 05/11/11 09:22 saw Tungsten plug power
232959 05/11/11 08:59 gaskell Compton: photon HV increased to 1650 for run 21996
232958 05/11/11 08:59 Armstrong Target screens
232957 05/11/11 08:58 birchall Analysis: High nonlinearity in runs 12076 - 12079
232956 05/11/11 08:57 Armstrong Unser says we were at 177 muA
232955 05/11/11 08:56 gaskell Compton: HV troubleshooting
232954 05/11/11 08:50 gaskell Compton: electron detector in garage, photon detector off
232953 05/11/11 08:43 sxyang injector run 2050413 is ended
232952 05/11/11 08:42 paschke Compton: compton photon signal too high?
232950 05/11/11 08:35 Armstrong Beam off for MCC to optimize beam quality
232948 05/11/11 08:24 sxyang stopped run 12082 early
232947 05/11/11 08:20 qwanalysis Analysis: Run 12082 - Plots and Summary Table for 100k Events.
232946 05/11/11 08:18 Armstrong Target happy at 180 muA as measured on MPS BCM
232945 05/11/11 08:10 cdaq Beam Time Accounting
232944 05/11/11 08:09 Dutta Shift Summary: OWL shift summary 05/11/11
232943 05/11/11 08:08 Mitra Target snapshots
232942 05/11/11 08:07 Dutta Started Injector run 2418
232937 05/11/11 06:59 qwanalysis Analysis: Run 12081 - Plots and Summary Table for 100k Events.
232932 05/11/11 05:57 qwanalysis Analysis: Run 12080 - Plots and Summary Table for 100k Events.
232931 05/11/11 05:47 Dutta Run number discrepancy fixed
232926 05/11/11 05:31 Mitra Target screens
232925 05/11/11 05:00 Mitra HV Controls snapshot
232924 05/11/11 04:59 Mitra General Tools snapshot
232923 05/11/11 04:43 qwanalysis Analysis: Run 12079 - Plots and Summary Table for 100k Events.
232916 05/11/11 03:36 Dutta CODA crashed
232915 05/11/11 03:31 qwanalysis Analysis: Run 12078 - Plots and Summary Table for 100k Events.
232912 05/11/11 02:24 Dutta Late entry: BMod was off in the begining of run 21076
232911 05/11/11 02:11 Dutta Analysis: A_q widths are too high
232910 05/11/11 02:07 qwanalysis Analysis: Run 12077 - Plots and Summary Table for 100k Events.
232904 05/11/11 01:17 qwanalysis Analysis: Run 12076 - Plots and Summary Table for 100k Events.
232903 05/11/11 01:07 narayan Compton: I@180, scintillator rates
232902 05/11/11 01:02 qwanalysis Analysis: Run 12064 - Plots and Summary Table for 100k Events.
232901 05/11/11 01:00 Dutta 180 uA on target
232898 05/11/11 00:47 narayan Shift Summary: Swing Shift Summary
232897 05/11/11 00:38 narayan Shift Summary: Swing Shift Summary
232896 05/11/11 00:38 narayan Shift Summary: Swing Shift Summary
232895 05/11/11 00:30 kamyers Analysis: Preliminary beamline background estimates
232894 05/11/11 00:29 Dutta Beam: Halo rates too high: request an auto-steer
232893 05/11/11 00:29 Mitra Changed bellowstemp3 High and HiHi limits
232892 05/11/11 00:26 narayan background detector HV off
232888 05/11/11 00:13 cdaq Beam Time Accounting
232886 05/11/11 00:10 mack tale of the position instabilities at the beginning of swing shift
232885 05/11/11 00:01 buddhini Target: Moved to LH2.
Tuesday
232879 05/10/11 23:47 buddhini Target: Moved to DS 4% Al target
232876 05/10/11 23:38 kamyers Notes from Jiawei's QTOR beamline shielding runs
232873 05/10/11 23:31 Jiawei octant 7 of collimator II is unblocked and all the lead bticks are removed from Al tray around US QTOR
232872 05/10/11 23:09 narayan Compton: ph-Det HV increased to 1650
232869 05/10/11 22:53 cdaq Run 12067 Pedestal Data
232868 05/10/11 22:53 buddhini Target: Moved to US 2% Al target
232865 05/10/11 22:47 narayan shift checklist snapshot
232862 05/10/11 22:40 cdaq Run 12065 Pedestal Data
232859 05/10/11 22:36 narayan Status: shimmed up the lead brick by 1"
232858 05/10/11 22:10 narayan Status: requested controlled access
232856 05/10/11 21:59 buddhini Target: late entry: moved to LH2
232851 05/10/11 21:51 cdaq Run 12062 Pedestal Data
232846 05/10/11 21:34 cdaq Run 12060 Pedestal Data
232843 05/10/11 21:19 narayan Status: controlled access
232838 05/10/11 20:54 narayan halo rates during background studies
232836 05/10/11 20:53 cdaq Run 12058 Pedestal Data
232834 05/10/11 20:52 buddhini Target: Moved to DS 2% Al target
232827 05/10/11 20:34 buddhini Target: Moved to LH2.
232826 05/10/11 20:32 cdaq Run 12055 Pedestal Data
232821 05/10/11 20:09 narayan Status:
232820 05/10/11 20:08 cdaq Run 12053 Pedestal Data
232819 05/10/11 19:46 dalton Compton: Backed out of electron trigger
232818 05/10/11 19:39 cdaq Run 12053 Pedestal Data
232805 05/10/11 18:50 cdaq Run 12050 Pedestal Data
232802 05/10/11 18:48 buddhini Target: Moved to US 2% Al target
232796 05/10/11 18:23 donjones Compton: changed HV channel to Compton 8
232794 05/10/11 18:16 narayan Status:
232793 05/10/11 18:15 cdaq Run 12047 Pedestal Data
232792 05/10/11 18:14 buddhini Target: Moved to DS 4% Al target
232786 05/10/11 17:53 kamyers halo spikes and FFB corrector spikes
232785 05/10/11 17:40 donjones Compton: HV went to 2200 V when setpoint was 1700V
232782 05/10/11 17:34 paschke Beam trips and PC flips
232781 05/10/11 17:23 narayan Status: halo rates brought down
232780 05/10/11 17:19 mack rebooting iochlc3 brought halo 3/4 rates up on the "wall" screen
232779 05/10/11 16:34 cdaq Beam Time Accounting
232778 05/10/11 16:19 donjones Compton: installed BGO detector
232776 05/10/11 16:13 kamyers bpm and epics scalers
232775 05/10/11 16:12 kamyers FFB corrector instability
232772 05/10/11 15:57 Armstrong Shift Summary: Day Shift summary - May 10 2011
232771 05/10/11 15:56 Armstrong Shift Summary: Day Shift summary - May 10 2011
232770 05/10/11 15:27 brads re: remove a symlink on cdaql7 (config was still invalid, should be correct now)
232768 05/10/11 14:56 Armstrong Firmware upgrade to allow 180 µA
232767 05/10/11 14:55 Armstrong Ready for beam
232765 05/10/11 14:48 Armstrong Harp repair
232764 05/10/11 14:27 beaufait qtor flush
232763 05/10/11 14:22 rob remove a symlink on cdaql7
232762 05/10/11 12:10 Armstrong General Tools snapshot
232761 05/10/11 11:38 Armstrong Correction - still in beam studies
232760 05/10/11 11:26 Armstrong MCC calls - ready to start beam restore
232759 05/10/11 11:03 Armstrong QTor back on again
232758 05/10/11 10:49 Armstrong QTor turned off
232751 05/10/11 10:04 mack little orange Pb wall is now blocking octant 7, collimator 2
232750 05/10/11 09:10 Armstrong QTor back!
232749 05/10/11 08:25 mack updated plugged octant 7 test plan
232748 05/10/11 08:03 cdaq Beam Time Accounting
232747 05/10/11 08:02 Dutta Shift Summary: OWL shift summary 05/10/11
232746 05/10/11 07:51 Armstrong Hall C survey done
232735 05/10/11 05:51 narayan Compton: details for run # 21978
232734 05/10/11 05:40 Mitra ioc4 alarm
232732 05/10/11 04:08 Mitra HV Settings snapshot
232731 05/10/11 04:07 Mitra General Tools Snapshot
232730 05/10/11 03:18 Dutta Energy measurement fails
232729 05/10/11 00:54 Dutta QTOR cannot be recovered at this time
232728 05/10/11 00:16 cdaq Beam Time Accounting
232727 05/10/11 00:15 kamyers Shift Summary: Swing Shift Summary
232726 05/10/11 00:10 kamyers W plug image with target in
Monday
232725 05/09/11 23:38 kamyers QTOR tripped again, and again
232724 05/09/11 23:20 kamyers QTOR trip, recovered
232722 05/09/11 23:16 cdaq Run 12042 Pedestal Data
232721 05/09/11 23:09 kamyers TSO hang up, missed helicity gates
232718 05/09/11 23:01 kamyers w plug back out/steer into plug set up
232717 05/09/11 22:49 kamyers my mistake in mixing up the coordinate system
232716 05/09/11 22:45 hamlet Target: Move LH2 target out of the beam to home
232715 05/09/11 22:42 kamyers not sure where the scanner actually is
232713 05/09/11 22:37 kamyers W plug image from target out run - with figure
232712 05/09/11 22:37 kamyers W plug image from target out run
232711 05/09/11 22:25 kamyers run plan comment: max target out current is 75 uA
232709 05/09/11 22:17 kamyers target BPM and scaler screen shots
232708 05/09/11 22:17 hamlet Target: Move Hydrogen target in the beam
232706 05/09/11 22:09 dunne Need to reduce currents for smaller raster size on dummy targets
232705 05/09/11 22:06 kamyers scanner moved to 0,0
232703 05/09/11 21:52 hamlet Target: Target GUI and strip charts screenshots for swing shift
232702 05/09/11 21:46 mack plugged octant 7 test plan for Tuesday morning
232699 05/09/11 21:32 kamyers target BPM and scaler screen shot
232698 05/09/11 21:28 kamyers getting ready for W plug maps: fake mps, bkgd HV on
232697 05/09/11 21:15 rakithab/hos Analysis: Moller Polarization Results
232696 05/09/11 21:00 rakithab Moller Measurement done. Backing Out
232694 05/09/11 20:43 jhoskins IHWP = IN for this run.
232692 05/09/11 20:30 kamyers FlipPCValues output
232686 05/09/11 19:58 rakithab BPM positions during Moller Production
232682 05/09/11 19:05 hamlet Target: Move LH2 target out from the beam to the Home position
232681 05/09/11 18:54 kamyers switched back to accelerator mps
232680 05/09/11 18:49 rakithab Moller Initial Setup
232679 05/09/11 18:41 rakithab Injector parameter at the beginning of the Moller measurement
232678 05/09/11 18:30 kamyers MCC going to send tune beam
232676 05/09/11 18:07 kamyers Beam update
232675 05/09/11 18:07 mack test plan - high current FC2 calibration by the Unser
232674 05/09/11 18:01 jhlee modifiy plot_raster
232673 05/09/11 17:51 Pitt "Dump beam in tungsten plug" testplan
232672 05/09/11 17:29 rob touched templeton shielding; set up telescope as a possible trigger for raster map
232671 05/09/11 17:22 Nuruzzaman Analysis: Modified "qwanalysis" script.
232669 05/09/11 17:02 rakithab Special Instructions to run plot_raster
232668 05/09/11 16:13 cdaq Beam Time Accounting
232667 05/09/11 16:09 gaskell Moller: beam-right hall probe moved to top
232666 05/09/11 15:57 Armstrong Shift Summary: Day Shift summary - May 9 2010
232665 05/09/11 15:20 Armstrong Shift checklist snapshots
232664 05/09/11 13:51 magee Target: Mid-day screenshots
232663 05/09/11 12:54 dalton Beam: Injector studies runs
232662 05/09/11 12:26 buddhini Started some injector analysis on cdaql3
232661 05/09/11 11:26 gaskell Compton: more shielding in front of Photon detector
232660 05/09/11 11:24 gaskell Compton: flipper repaired, re-installed
232659 05/09/11 11:06 rob lost hclog entry: Shift Summary: Swing 05/08/2011
232658 05/09/11 10:49 rob removed six dosimeters from cable trays
232657 05/09/11 10:34 Armstrong Target: Hall A target cooldown will start in about one hour
232656 05/09/11 10:19 Armstrong Hall C Curvey complete
232655 05/09/11 09:22 suhring Faraday Cup cross calibration
232654 05/09/11 09:16 Armstrong Survey started; need for access to Hall C?
232653 05/09/11 09:14 narayan Compton: eDet garaged, phDet HV off
232651 05/09/11 08:10 cdaq Beam Time Accounting
232650 05/09/11 07:57 Dutta Ramping QTOR to zero current
232648 05/09/11 07:52 Dutta Shift Summary: Owl Shift summary 05/09/11
232647 05/09/11 07:50 Dutta Shift Summary: Owl Shift summary 05/09/11
232646 05/09/11 07:46 qwanalysis Analysis: Run 12035 - Plots and Summary Table for 100k Events.
232645 05/09/11 07:46 magee Target: Early morning screenshots
232638 05/09/11 07:05 Dutta Bellows temperature chart for owl shift
232637 05/09/11 06:39 qwanalysis Analysis: Run 12034 - Plots and Summary Table for 100k Events.
232636 05/09/11 06:12 narayan Compton: screenshot of the recent DAQ crash
232631 05/09/11 05:12 qwanalysis Analysis: Run 12033 - Plots and Summary Table for 100k Events.
232626 05/09/11 04:20 Korkmaz GT and HV plots
232625 05/09/11 04:00 qwanalysis Analysis: Run 12032 - Plots and Summary Table for 100k Events.
232623 05/09/11 03:53 Dutta Compton DAQ crashed
232622 05/09/11 03:52 qwanalysis Analysis: Run 12031 - Plots and Summary Table for 100k Events.
232615 05/09/11 02:15 qwanalysis Analysis: Run 12030 - Plots and Summary Table for 100k Events.
232614 05/09/11 01:58 narayan Compton: run # 21957-21960 have all eDet planes at HV=400
232608 05/09/11 00:50 qwanalysis Analysis: Run 12029 - Plots and Summary Table for 100k Events.
232602 05/09/11 00:28 Dutta Output of FlipPCValues script when IWHP was pulled out
232599 05/09/11 00:06 Korkmaz Target: Target GUI and strip charts screenshots at start of owl shift
232598 05/09/11 00:04 cdaq Beam Time Accounting
232597 05/09/11 00:01 hamlet Beam current, tungsten plug and bellows temperature during swing shift
232596 05/09/11 00:01 mack Failure of high current calibration of FC against the Unser
Sunday
232594 05/08/11 23:34 qwanalysis Analysis: Run 12027 - Plots and Summary Table for 100k Events.
232593 05/08/11 23:31 mack/jiawei late entry: notes from low current FC calibration
232588 05/08/11 23:16 manos Started injector run 2410
232587 05/08/11 23:00 manos Swing shift snapshots
232586 05/08/11 22:57 manos QTor communication failure
232585 05/08/11 22:44 qwanalysis Analysis: Run 12026 - Plots and Summary Table for 100k Events.
232584 05/08/11 22:36 manos Valve closed again
232580 05/08/11 21:48 manos beam down for a while
232577 05/08/11 20:30 qwanalysis Analysis: Run 12024 - Plots and Summary Table for 100k Events.
232576 05/08/11 20:22 manos Requested 170uA
232571 05/08/11 19:28 qwanalysis Analysis: Run 12023 - Plots and Summary Table for 100k Events.
232566 05/08/11 18:52 manos Unstable beam
232565 05/08/11 18:29 qwanalysis Analysis: Run 12022 - Plots and Summary Table for 100k Events.
232564 05/08/11 18:15 dalton Compton: BPM calibration
232559 05/08/11 17:58 rakithab BCM17 30 dB attenuator inserted
232556 05/08/11 17:54 Jiawei Was not able to do the high current calibration because of the faraday cup problem
232555 05/08/11 17:39 Jiawei run 12020 is a junk run
232549 05/08/11 17:29 jiawei Just a test
232545 05/08/11 17:20 hamlet Target: Move LH2 target in the beam
232544 05/08/11 17:16 mack bcm1,2 gains back to 2 for high current running (nuf said)
232541 05/08/11 16:53 rakithab PITA and IA Scan Summary
232540 05/08/11 16:50 rajotte steady increase of X position difference since April 28th
232537 05/08/11 16:30 rakithab Moller Run #1211 is junk
232532 05/08/11 16:14 hamlet Target: Target GUI and strip charts screenshots at start of swing shift
232531 05/08/11 16:13 rakithab Correct Injector run number is 1208
232530 05/08/11 16:12 rakithab Correct injector run number is 2407
232529 05/08/11 16:10 Mitra Day Shift Summary
232528 05/08/11 16:08 hamlet Target: Move LH2 target out from beam to Home position
232527 05/08/11 16:07 cdaq Beam Time Accounting
232525 05/08/11 16:05 rakithab The moller run 1210 is junk
232520 05/08/11 15:44 Mitra Low Current FC Calibration
232518 05/08/11 15:37 mack bcm1,2 to gain setting number 5 (nuf said)
232517 05/08/11 15:37 magee BCM17 removed -re-booted Moller crate
232512 05/08/11 15:24 rakithab Turned ON charge feedback and Beam Modulation at the end of the run 12015
232511 05/08/11 15:20 rakithab Parity Controls at the end of the IA and PITA scan
232510 05/08/11 15:14 jhlee one should select "analysis" on "location"
232509 05/08/11 15:08 Mitra HV settings snap shot
232508 05/08/11 14:58 jhlee data tracker is working fine
232507 05/08/11 14:56 Mitra General Tools screen shot
232506 05/08/11 14:47 rakithab Injector run 1208 started at 165uA for PITA Scan
232502 05/08/11 14:15 rakithab Switched Pockels Cell ON before the run 12014
232501 05/08/11 14:15 rakithab Started injector run 1207 for PITA scan at 140uA
232500 05/08/11 14:12 rakithab Parity Controls Screen at Hall C IA set to 33000
232497 05/08/11 13:43 rakithab Injector run 2406 started for IA scan at 140uA
232494 05/08/11 13:33 rakithab Parity Controls Screen at Hall C IA set to 33000
232493 05/08/11 13:28 magee Target: lunchtime screenshots
232492 05/08/11 13:17 rakithab Parity Controls Screen at Hall C IA set to 3000
232491 05/08/11 13:15 rakithab Parity Controls Screen at Hall C IA set to 63000
232490 05/08/11 13:11 kamyers data tracker GUI messed up?
232489 05/08/11 13:03 rakithab Switched Pockels Cell OFF for the parity run 12012 and injector run 2405
232488 05/08/11 13:02 dalton Beam: High Current Injector BPM calibration: Injector run 2404
232487 05/08/11 12:59 rakithab Started injector run 2405 for IA scan at 165uA
232484 05/08/11 11:53 Benesch Beam: no dispersion leakage seen in hall C - instrumental?
232483 05/08/11 11:50 dunne Started Polarized source injector pedestal scan
232481 05/08/11 10:48 magee Qtor is back
232479 05/08/11 10:32 magee Qtor saga continues (stopped ramping at 6300A...)
232478 05/08/11 10:21 magee Qtor trip - reset power supply
232477 05/08/11 09:46 qwanalysis Analysis: Run 12011 - Plots and Summary Table for 100k Events.
232474 05/08/11 09:11 magee compton lock for run 21958 might be incorrect
232470 05/08/11 08:59 Mitra No beam
232468 05/08/11 08:53 magee Target: Early morning screenshots
232466 05/08/11 08:39 Mitra IHWP --> IN
232462 05/08/11 08:03 cdaq Beam Time Accounting
232461 05/08/11 08:01 Shift Summary:
232460 05/08/11 07:21 qwanalysis Analysis: Run 12008 - Plots and Summary Table for 100k Events.
232459 05/08/11 07:14 Dutta Compton: run 21955 has eDet HV=400V for all planes
232454 05/08/11 06:22 qwanalysis Analysis: Run 12007 - Plots and Summary Table for 100k Events.
232447 05/08/11 05:27 Korkmaz GT and HV plots
232446 05/08/11 05:14 qwanalysis Analysis: Run 12006 - Plots and Summary Table for 100k Events.
232441 05/08/11 04:13 qwanalysis Analysis: Run 12005 - Plots and Summary Table for 100k Events.
232436 05/08/11 03:40 qwanalysis Analysis: Run 12004 - Plots and Summary Table for 100k Events.
232431 05/08/11 02:07 qwanalysis Analysis: Run 12003 - Plots and Summary Table for 100k Events.
232426 05/08/11 01:04 qwanalysis Analysis: Run 12002 - Plots and Summary Table for 100k Events.
232421 05/08/11 00:13 narayan Compton: plane 2, strip 10 masked for this run
232420 05/08/11 00:06 cdaq Beam Time Accounting
232419 05/08/11 00:05 manos Shift Summary: Swing 05/07/2011
232418 05/08/11 00:04 qwanalysis Analysis: Run 12001 - Plots and Summary Table for 100k Events.
232417 05/08/11 00:03 Korkmaz Target: Target GUI and strip charts screenshots at start of owl shift
Saturday
232416 05/07/11 23:55 hamlet Beam current, tungsten plug and bellows temperature during swing shift
232411 05/07/11 23:37 manos IHWP -> OUT
232408 05/07/11 22:55 manos Plots for previous entry
232407 05/07/11 22:50 manos Huge X-posiition difference at target
232406 05/07/11 22:36 qwanalysis Analysis: Run 11999 - Plots and Summary Table for 100k Events.
232401 05/07/11 21:51 manos Swing shift screenshots
232400 05/07/11 21:41 manos Started injector run 2402
232399 05/07/11 21:21 qwanalysis Analysis: Run 11998 - Plots and Summary Table for 100k Events.
232394 05/07/11 20:19 qwanalysis Analysis: Run 11997 - Plots and Summary Table for 100k Events.
232391 05/07/11 20:07 Jiawei position sensitivities from recent runs with different target y position.
232388 05/07/11 19:29 qwanalysis Analysis: Run 11996 - Plots and Summary Table for 100k Events.
232387 05/07/11 19:19 manos Compton: Beam profile scan : moved orbit lock to 0.74mm
232386 05/07/11 19:18 jhlee a minor change in the runend.tcl script
232384 05/07/11 19:08 manos Scanner vertical scan ended, back to production
232383 05/07/11 19:07 hamlet Target: Change target. Put LH2 target in the Beam. Raster now back to 4.0 x 4.0
232379 05/07/11 18:55 qwanalysis Analysis: Run 11995 - Plots and Summary Table for 100k Events.
232378 05/07/11 18:53 hamlet Probably QWT_solidB is a right thermocontrol for 1% Al
232377 05/07/11 18:35 qwanalysis Analysis: Run 11994 - Plots and Summary Table for 100k Events.
232373 05/07/11 18:05 manos Scanner vertical scan
232372 05/07/11 18:03 narayan Compton: HV for run 21942 was 400V for all eDet planes
232371 05/07/11 18:01 hamlet Target: Change target. Take out LH2, Move in US 1% Al target.
232367 05/07/11 17:32 manos Very small Y-sensitivity, very large X-position differences at target
232366 05/07/11 17:07 qwanalysis Analysis: Run 11993 - Plots and Summary Table for 100k Events.
232365 05/07/11 16:58 hamlet Target: Target GUI and strip charts screenshots at start of swing shift
232360 05/07/11 16:17 narayan Compton: HV for run 21941 was 400V for all eDet planes
232359 05/07/11 16:09 qwanalysis Analysis: Run 11992 - Plots and Summary Table for 100k Events.
232358 05/07/11 16:02 cdaq Beam Time Accounting
232356 05/07/11 15:57 vanoers Shift Summary: Day Shift summary
232355 05/07/11 15:53 kamyers Beam: also saw halo rate increase with raster size during tracking running thursday
232353 05/07/11 15:49 vanoers IHWP IN
232350 05/07/11 15:02 qwanalysis Analysis: Run 11991 - Plots and Summary Table for 100k Events.
232349 05/07/11 15:00 benesch Beam: halo rates up an eighth at 5x5 vs 4x4
232344 05/07/11 14:18 vanoers GT and HV plots
232343 05/07/11 13:54 vanoers Beam: Run 11989 had very little beam delivered: cause of the low counts
232342 05/07/11 13:52 Benesch Beam: halo rates went up 5% when raster changed from 4x4 to 4.5x4.5
232341 05/07/11 13:46 qwanalysis Analysis: Run 11989 - Plots and Summary Table for 100k Events.
232336 05/07/11 13:28 vanoers Beam: LH2 production run with raster size 4.5 by 4.5
232332 05/07/11 12:46 target screens -- showing some recent history of QWPower and QW4K
232331 05/07/11 12:40 qwanalysis Analysis: Run 11988 - Plots and Summary Table for 100k Events.
232330 05/07/11 12:29 Korkmaz Target: target issues in the last 45 minutes
232328 05/07/11 12:20 vanoers Beam:
232325 05/07/11 12:15 qwanalysis Analysis: Run 11987 - Plots and Summary Table for 100k Events.
232324 05/07/11 11:19 vanoers Beam:
232319 05/07/11 10:23 vanoers Beam Trips
232318 05/07/11 09:57 qwanalysis Analysis: Run 11986 - Plots and Summary Table for 100k Events.
232313 05/07/11 08:52 qwanalysis Analysis: Run 11985 - Plots and Summary Table for 100k Events.
232308 05/07/11 08:12 Dutta EDET position is blank on the Hall-C status screen
232307 05/07/11 08:02 cdaq Beam Time Accounting
232306 05/07/11 08:01 Dutta Shift Summary: Owl Shift summary 05/07/11
232305 05/07/11 07:52 qwanalysis Analysis: Run 11984 - Plots and Summary Table for 100k Events.
232304 05/07/11 07:45 L.Lee Target: Target GUI and strip charts screenshots towards end of owl shift
232299 05/07/11 06:47 qwanalysis Analysis: Run 11983 - Plots and Summary Table for 100k Events.
232294 05/07/11 05:43 qwanalysis Analysis: Run 11982 - Plots and Summary Table for 100k Events.
232289 05/07/11 04:43 Dutta late entry: IHWP taken OUT
232288 05/07/11 04:40 qwanalysis Analysis: Run 11981 - Plots and Summary Table for 100k Events.
232283 05/07/11 04:10 Dutta Ouput of FlipPCValues Script
232277 05/07/11 03:26 qwanalysis Analysis: Run 11979 - Plots and Summary Table for 100k Events.
232276 05/07/11 03:11 L.Lee Target: Target GUI and strip charts screenshots for owl shift
232274 05/07/11 03:06 L.Lee Target: Move target in vertical direction back to nominal position
232271 05/07/11 02:35 qwanalysis Analysis: Run 11978 - Plots and Summary Table for 100k Events.
232270 05/07/11 02:06 Dutta New wrinkle in the QTOR trip saga
232266 05/07/11 01:55 jhlee reboot vmec18 and vmec19
232265 05/07/11 01:12 Jiawei Run 11976 and 11977 target position -0.5mm or -1mm?
232262 05/07/11 00:48 jhlee fixed runend script, should wait one hour to see if it works or not.
232261 05/07/11 00:39 Dutta QTOR tripped
232257 05/07/11 00:28 L.Lee Target: Move target in vertical direction down by another 0.5 mm, now -1.0 mm relative to nominal position
232254 05/07/11 00:02 cdaq Beam Time Accounting
Friday
232253 05/06/11 23:56 Ramesh Shift Summary
232252 05/06/11 23:45 qwanalysis Analysis: Run 11975 - Plots and Summary Table for 100k Events.
232251 05/06/11 23:39 Ramesh snapshot for checklist
232250 05/06/11 23:25 hamlet Beam, bellows and tungsten plug temperature during swing shift
232248 05/06/11 23:22 Ramesh no end_of_run screen this shift so far
232247 05/06/11 23:20 hamlet Target: Move target in vertical direction down by 0.5 mm relative to nominal position
232243 05/06/11 22:43 Ramesh HV gui problem earlier in the Swing was due to hv_gui link problem
232242 05/06/11 22:36 qwanalysis Analysis: Run 11974 - Plots and Summary Table for 100k Events.
232239 05/06/11 22:15 hamlet Target: Move target in vertical direction additional +0.5 mm, in total target moved in vertical direction by +1.0mm
232238 05/06/11 22:13 dalton Compton: Electron detector moved in
232236 05/06/11 22:01 Ramesh Scanner HV and it's controller power off
232235 05/06/11 21:56 Ramesh Scanner Vertical scan finished
232234 05/06/11 21:53 dalton Compton: New beam position, y=0.79 mm
232233 05/06/11 21:50 dalton Compton: Flipper died
232232 05/06/11 21:46 qwanalysis Analysis: Run 11973 - Plots and Summary Table for 100k Events.
232231 05/06/11 21:26 Ramesh Scanner Vert scan run 11973
232230 05/06/11 21:15 hamlet Target: Move target in vertical direction by +0.5mm
232225 05/06/11 20:36 qwanalysis Analysis: Run 11972 - Plots and Summary Table for 100k Events.
232224 05/06/11 20:25 Ramesh Run_end comment pink_screen missing
232222 05/06/11 20:17 qwanalysis Analysis: Run 11971 - Plots and Summary Table for 100k Events.
232219 05/06/11 19:59 hamlet Target: Target GUI and strip charts screenshots at start of data taking during swing shift
232216 05/06/11 19:41 qwanalysis Analysis: Run 11970 - Plots and Summary Table for 100k Events.
232215 05/06/11 19:27 rakithab turned on charge feedback and beam modulation
232213 05/06/11 19:23 Ramesh HV gui working now
232212 05/06/11 19:16 hamlet Target: Move Hydrogen target on the beam
232211 05/06/11 18:49 Ramesh HV GUI won't respond, hard rebooting g0ioc2
232210 05/06/11 18:18 Ramesh Controlled access finished, restoring beam
232209 05/06/11 17:52 rakithab Re:Moller Systematic Study Summary
232208 05/06/11 17:45 rakithab Analysis: Moller Systematic Study Summary
232207 05/06/11 17:41 magee moller high voltage OFF
232206 05/06/11 17:41 Ramesh Escorted access to remove Compton laser obstruction
232205 05/06/11 17:41 rob killed rogue speech robot
232204 05/06/11 17:36 team moller Moller studies concluded for today.
232202 05/06/11 17:19 magee Tune plot of x=y=+1
232198 05/06/11 16:55 magee Speakers erroneously saying "beam is off" - speakers off
232190 05/06/11 16:04 cdaq Beam Time Accounting
232188 05/06/11 15:59 magee Moller: tune - x=-1 y=-1
232186 05/06/11 15:51 Solvignon Moller tune check at x=+0.5, y=0
232182 05/06/11 15:33 vanoers Day shift: Moller runs
232180 05/06/11 15:25 Solvignon Moller: BPM screen at x=+0.5, y=0
232176 05/06/11 15:01 Solvignon Moller tune check at y=-2
232173 05/06/11 14:56 Solvignon Moller: BPM screen at y=-2
232172 05/06/11 14:55 Solvignon Moller: tune check at y=-1
232169 05/06/11 14:43 Armstrong Target IOC hangs; rebooted
232167 05/06/11 14:39 Solvignon Moller IOC rebooted
232166 05/06/11 14:22 Solvignon Moller: BPM screen at y=-1
232164 05/06/11 14:17 Solvignon Moller: BPM screen at x=0, y=1
232162 05/06/11 14:08 magee Moller: injector parameters - laser phase
232160 05/06/11 14:02 magee Moller: beam injector parameters half-way through
232157 05/06/11 13:53 Solvignon Moller tune check at y=+1
232155 05/06/11 13:48 Solvignon Moller tune check at y=+2, x=0
232151 05/06/11 13:20 Solvignon Moller: BPM screen at x=0, y=+2.0
232146 05/06/11 12:54 Solvignon Moller tune check back at x=0, y=0
232144 05/06/11 12:44 Solvignon Moller: BPM screen, back to x=0, y=0
232142 05/06/11 12:41 Solvignon Moller Tune check after data taking at x=+2.0
232140 05/06/11 12:32 Armstrong Target Screens - midshift
232137 05/06/11 12:16 Solvignon Moller: BPM screen for x=+2.0, y=0
232135 05/06/11 12:11 Solvignon Moller Tune check after data taking at x=+0.075
232132 05/06/11 11:57 Solvignon Moller Tune check after data taking at x=-0.075
232130 05/06/11 11:52 magee Moller: BPM plots for x=0.75mm (- and +)
232123 05/06/11 11:05 Solvignon Moller: BPM screen for x=-2, y=0
232122 05/06/11 11:02 Solvignon Moller Tune check at x=-2, y=0
232121 05/06/11 11:00 cdaq Moller Run No msql server: tune check
232115 05/06/11 10:31 brads re: slow cdaql6
232114 05/06/11 10:31 Solvignon Moller tune check after measurement at "ideal beam position"
232113 05/06/11 10:31 jhoskins Beam Modulation Driver File Updated
232111 05/06/11 10:26 pking The MySQL server is running "standard" tasks; however X is using a large number of resources.
232109 05/06/11 10:18 jhlee closes 5 General_Tools on cdaql6
232106 05/06/11 10:08 Solvignon Moller tune after cycling the quad and at "ideal beam position"
232105 05/06/11 10:07 magee cdaql6 painfully slow
232104 05/06/11 10:07 benesch halo rates: orbit around fast raster
232101 05/06/11 09:56 Solvignon Moller tune: BPM position
232098 05/06/11 09:27 Solvignon Moller: BPM position
232097 05/06/11 09:11 jhlee cdaql5 disk isn't full, and it was full.
232096 05/06/11 08:34 magee Moller set-up
232095 05/06/11 08:32 Armstrong Target moved to out-of-beam; QTor ramped to zero
232094 05/06/11 08:30 magee Moller: beam injector parameters
232093 05/06/11 08:29 magee Ramping qtor down
232091 05/06/11 08:25 Armstrong Setting up for Moller
232086 05/06/11 08:07 Korkmaz Shift Summary: owl shift summary
232085 05/06/11 08:05 cdaq Beam Time Accounting
232084 05/06/11 07:35 qwanalysis Analysis: Run 11967 - Plots and Summary Table for 100k Events.
232079 05/06/11 06:32 qwanalysis Analysis: Run 11966 - Plots and Summary Table for 100k Events.
232078 05/06/11 06:28 Korkmaz FlipPCValues output values just before run 11966
232076 05/06/11 06:20 Korkmaz IHWP IN
232072 05/06/11 06:10 Korkmaz GT and HV plots
232071 05/06/11 05:30 qwanalysis Analysis: Run 11965 - Plots and Summary Table for 100k Events.
232068 05/06/11 05:11 Korkmaz a bit more on halo rates
232067 05/06/11 05:02 Korkmaz QTOR reset locally
232066 05/06/11 04:47 qwanalysis Analysis: Run 11964 - Plots and Summary Table for 100k Events.
232065 05/06/11 04:45 Korkmaz QTOR trip
232058 05/06/11 03:59 Korkmaz halo monitors' rates
232057 05/06/11 03:39 qwanalysis Analysis: Run 11963 - Plots and Summary Table for 100k Events.
232052 05/06/11 02:27 qwanalysis Analysis: Run 11962 - Plots and Summary Table for 100k Events.
232051 05/06/11 02:23 Korkmaz cdaql5 disk almost full
232046 05/06/11 01:19 qwanalysis Analysis: Run 11961 - Plots and Summary Table for 100k Events.
232041 05/06/11 00:25 L.Lee Target: Tweaked 15K JT valve
232040 05/06/11 00:18 cdaq Beam Time Accounting
232039 05/06/11 00:17 qwanalysis Analysis: Run 11960 - Plots and Summary Table for 100k Events.
232038 05/06/11 00:09 L.Lee Target: Target GUI and strip charts screenshots at start of owl shift
232037 05/06/11 00:08 sxyang screenshots of GeneralTool and HV GUI
232034 05/06/11 00:06 sxyang Summary of Swing shift
Thursday
232031 05/05/11 23:57 beaufait target shift summery
232030 05/05/11 23:27 qwanalysis Analysis: Run 11959 - Plots and Summary Table for 100k Events.
232029 05/05/11 23:13 cdaq Beam Time Accounting
232025 05/05/11 22:47 narayan Compton: eDet voltage for all planes = -500V
232024 05/05/11 22:37 beaufait Bellows temp
232022 05/05/11 22:15 qwanalysis Analysis: Run 11958 - Plots and Summary Table for 100k Events.
232021 05/05/11 22:15 donjones Compton: Vertical scan: new YPOS=0.62mm
232018 05/05/11 21:40 qwanalysis Analysis: Run 11957 - Plots and Summary Table for 100k Events.
232017 05/05/11 21:21 buddhini Started analysis of bpm pedestal run 11956 on cdaql3
232016 05/05/11 21:11 buddhini Started injector run 2401 at 21.07
232015 05/05/11 21:07 qwanalysis Analysis: Run 11956 - Plots and Summary Table for 100k Events.
232014 05/05/11 21:02 sxyang back to production run
232013 05/05/11 20:59 buddhini Turned on modulation and qwfeedback
232012 05/05/11 20:58 buddhini Turned on compton detector
232010 05/05/11 20:43 buddhini Moving electron detector to BEAM position
232009 05/05/11 20:42 buddhini IOCSE 18 and 20 are back in auto gain mode
232008 05/05/11 20:40 buddhini IOCES 14 and 17 are back in auto gain mode
232007 05/05/11 20:32 buddhini Ended tje BPM pedestal scan program.
232005 05/05/11 20:27 buddhini Current ranget used for the BPM scan : 120 uA to 170 uA.
232004 05/05/11 20:18 buddhini Late enrty : Don turned off the Comtpon detector before we began BPM pedestal scan program
232003 05/05/11 20:13 buddhini Current, FB status and halo rates during BPM scan
232002 05/05/11 19:55 rakithab Unusual yield distribution for MD1 Neg and MD3 Pos during the frist 100K of the run 11953
232001 05/05/11 19:51 sxyang screenshots of iocsel 14 and 20
232000 05/05/11 19:50 sxyang screenshots of iocsel 17 and 18
231996 05/05/11 19:45 qwanalysis Analysis: Run 11954 - Plots and Summary Table for 100k Events.
231995 05/05/11 19:35 buddhini Turned off beam modulation and feedback
231993 05/05/11 19:27 sxyang screenshots of iocsel 20
231992 05/05/11 19:26 sxyang screenshots of iocse17 and iocsel18
231991 05/05/11 19:23 buddhini IOSCE 14 Live display
231988 05/05/11 19:19 buddhini Starting BPM pedestal scan program
231987 05/05/11 19:19 qwanalysis Analysis: Run 11953 - Plots and Summary Table for 100k Events.
231986 05/05/11 18:57 sxyang ion chamber works well
231985 05/05/11 18:57 beaufait When IOC15 was rebooted at 1900
231981 05/05/11 18:51 sxyang changed the bcm 1/2 gains setting
231980 05/05/11 18:43 jhlee 4 autoanalyzers are running on cdaql5, re-enable them in cronjob
231978 05/05/11 18:31 pking Analysis: Switched main analyzer version on cdaq cluster back to 1.08rc4
231976 05/05/11 18:25 benesch hall C dump camera gives nothing
231975 05/05/11 17:48 sxyang testing the ion chamber
231973 05/05/11 16:52 gaskell Moller: replaced gate generator for MPS
231972 05/05/11 16:32 sxyang called for a full sweep
231971 05/05/11 16:31 gaskell Compton: ion chamber removed
231970 05/05/11 16:19 gaskell Moller: field in Q2
231969 05/05/11 15:37 vanoers snapshots of high voltage and general tools
231967 05/05/11 15:15 dalton Compton: Flipper mirror swapped out
231966 05/05/11 15:09 kamyers has bcm gain been switched back to 2?
231965 05/05/11 15:01 rob MD current-mode restored; ready for high-current operation
231964 05/05/11 14:48 rakithab Target: GUI and strip charts screenshots
231963 05/05/11 14:42 rob swapped out md3+ current-mode HV cable for spare in hall
231962 05/05/11 14:30 vanoers Retraction of VDC's
231961 05/05/11 14:25 Leckey R3 Retracted
231960 05/05/11 14:20 jhlee event mode runs are marks as "not to be analyzed"
231959 05/05/11 13:55 benesch update on ion chamber work posted to elog by Michaud; I copy here
231958 05/05/11 13:50 rob done with MD event-mode; entering the hall to convert to current-mode
231948 05/05/11 13:25 gaskell Moller: Hall probes installed in big quad
231917 05/05/11 11:32 smithg Target: target motion plot
231907 05/05/11 11:04 rob restarted coda after several event builder crashes
231884 05/05/11 09:59 brads Please clean up /w/hallc/qweak disk, it is 100% full
231881 05/05/11 09:43 smithg Target: evaporator ice is gone
231880 05/05/11 09:42 smithg target motions last night
231879 05/05/11 09:38 dunne Restricted Access
231874 05/05/11 09:06 jhlee change analysis stauts from run 11872 to 11901 as not to be analyzed
231873 05/05/11 08:39 rob background HV off; MD HV on; setting up for pulsed LED calibration
231872 05/05/11 08:04 cdaq Beam Time Accounting
231871 05/05/11 08:00 Korkmaz Shift Summary: Owl shift summary
231870 05/05/11 07:46 rob added background detectors to HV GUIs
231866 05/05/11 07:02 cdaq Beam Time Accounting
231857 05/05/11 06:38 rob runs 11904 and 11905 had .AND. trigger
231856 05/05/11 06:37 rob ramping qtor to zero
231850 05/05/11 06:21 Korkmaz Beam will be off at 7:00 am for beam studies
231846 05/05/11 05:48 kamyers EM Aluminum running done, still on BCM gain 5
231845 05/05/11 05:44 L.Lee Target: Move back to Hydrogen-Cell target
231838 05/05/11 05:27 L.Lee Target: Move to DS-8%-Al
231832 05/05/11 05:05 L.Lee Target: Move to US-Pure-Al
231824 05/05/11 04:01 kamyers Interesting halo/ts rate dependence on raster size
231823 05/05/11 03:59 L.Lee Target: Move to US-1%-Al
231816 05/05/11 03:14 L.Lee Target: Move to US-4%-Al
231815 05/05/11 03:14 kamyers DS Centering raster map
231812 05/05/11 03:04 L.Lee Target: Move to DS-Centering-Hole
231807 05/05/11 02:50 L.Lee Target: Move to DS-8%-Al
231803 05/05/11 02:40 kamyers run 11883 beam off run
231801 05/05/11 02:37 L.Lee Target: Move to US-2%-Al
231797 05/05/11 02:27 L.Lee Target: Move to DS-2%-Be
231791 05/05/11 01:32 kamyers work disk on the farm filled
231786 05/05/11 00:49 L.Lee Target: Move to DS-4%-Al
231781 05/05/11 00:35 L.Lee Target: Alarm Handler Limits for H2 Downstream beamline vacuum
231778 05/05/11 00:26 L.Lee Target: Target GUI and strip charts screenshots at start of owl shift
231777 05/05/11 00:25 L.Lee Target: Move from LH2 cell to DS-8%-Al target
231775 05/05/11 00:21 jhlee turned off autoanalyzers on cdaql5, switch main analyzer to trunk version on cdaq cluster
231773 05/05/11 00:16 Spayde Sent Scanner Home and Turned Off Motion Controller
231772 05/05/11 00:13 mack setting up for 120 nA Aluminum running
231771 05/05/11 00:10 mack bcm1,2 gain settings to 5
231767 05/05/11 00:05 Spayde Shift Summary: Swing Shift Summary 05/04/2011
Wednesday
231766 05/04/11 23:52 Armstrong VDC HVs turned off
231765 05/04/11 23:46 jhlee turned off ROC9/10 to switch back to parity DAQ
231764 05/04/11 23:44 jhlee DAQ crashes (ROC9/10, EB4/ER4)
231763 05/04/11 23:44 Spayde Shut Off Scanner HV. Scanner Still Parked in Middle of Bar.
231762 05/04/11 23:43 Armstrong Rate too large for ROCs
231761 05/04/11 23:35 jhlee DAQ crashes (ROC9)
231759 05/04/11 23:34 Armstrong raised beam current
231756 05/04/11 23:23 jhlee Wire Hit plots for Vader, Leia, Yoda, and Han
231752 05/04/11 22:49 Armstrong Rotate VDCs to Octants 5 and 1
231751 05/04/11 22:48 Spayde Done in Hall. Asked for Beam.
231750 05/04/11 22:47 Spayde Shift Checklist Screenshots
231749 05/04/11 22:31 Spayde Requested Access to Rotate Chambers
231747 05/04/11 22:16 mack comments on Al event mode run plan
231746 05/04/11 22:15 sxyang vdc plots from tracking run 11865
231743 05/04/11 22:02 Spayde Moved Scanner
231741 05/04/11 21:51 sxyang vader and leia
231738 05/04/11 21:39 Armstrong VDCs rotated to 7 & 3
231737 05/04/11 21:24 hamlet Target: Target GUI and strip charts screenshots for Swing shift
231736 05/04/11 21:22 sxyang vdc plots from run 11864
231735 05/04/11 21:21 Spayde Requested Access to Rotate R3 Chambers
231732 05/04/11 20:45 Armstrong VDCs rotated to 6 & 2
231731 05/04/11 20:45 Spayde R3 Rotated. Requested Beam
231730 05/04/11 20:30 rob scanner to 0,0; motion controller off; HV still on
231728 05/04/11 20:28 Spayde Requested Escorted Access to Rotate R3 Chambers
231727 05/04/11 20:15 Armstrong VDCs tripped; reset
231725 05/04/11 20:11 rakithab Changed the first100k tracking setup wrapper class to run the script using a trunk revision of the analyzer
231723 05/04/11 20:06 sxyang vdc plots from tracking run 11861
231722 05/04/11 20:05 rakithab devel qwtracking is not working
231721 05/04/11 20:02 Armstrong Rotated VDCs to 3 & 7
231718 05/04/11 19:37 sxyang vdc plots for tracking run 11857
231713 05/04/11 19:22 Spayde Done Rotating R3. Asked For Beam.
231711 05/04/11 19:11 Spayde Turning On Scanner Scintillator HVs to 1500 V
231710 05/04/11 19:08 rob scanner motion controller on; scanner homing
231709 05/04/11 19:04 rob md data checkout with run 11857
231708 05/04/11 18:59 Armstrong VDCs on, data OK
231706 05/04/11 18:53 Spayde Requested Escorted Access to Rotate R3 Chambers
231704 05/04/11 18:48 Armstrong Slit/attenuator beam settings
231703 05/04/11 18:22 rob md event-mode checkout
231697 05/04/11 18:18 Armstrong VDCs on at 3800 V
231694 05/04/11 18:10 kamyers Aluminum tracking mode run plan for tonight
231693 05/04/11 18:04 hamlet Target: Target: Put Hydrogen target in
231692 05/04/11 18:02 Spayde Using Fake MPS.
231690 05/04/11 17:59 Armstrong VDCs into position: 4 & 8
231689 05/04/11 17:56 Spayde Ramping Up QTOR. Turned on Trigger and Halo Scintillators.
231687 05/04/11 17:46 Spayde/Mahur Turned on MD Event Mode HV
231685 05/04/11 17:33 gaskell Moller tune - quad problems
231684 05/04/11 17:28 Spayde Switching to Tracking DAQ
231681 05/04/11 17:10 gaskell/mage Moller results for May 4, 2011
231680 05/04/11 16:59 smithg found ramp rate at 2.5 uA/s again
231679 05/04/11 16:59 Spayde Switching to Tracking. Requesting Controlled Access.
231678 05/04/11 16:52 magee Moller finished - backing out
231675 05/04/11 16:21 gaskell Moller: removed gatre generator from MPS electronics chain
231672 05/04/11 16:08 cdaq Beam Time Accounting
231668 05/04/11 15:57 buddhini Target: Target GUI and strip charts screenshots at the end of day shift
231667 05/04/11 15:55 buddhini Snapshots of HV and General Tools
231665 05/04/11 15:54 buddhini Flipped the PC values for IHWP OUT state (for Moller)
231663 05/04/11 15:39 vanoers Shift Summary: Daytime shift
231654 05/04/11 14:53 jhlee update BCM5/6 calibration constants on cdaq cluster
231644 05/04/11 13:54 gaskell Moller restart
231643 05/04/11 13:48 smithg Target: Please leave ramp rate at 5 uA/s
231642 05/04/11 13:33 buddhini Target: Moved to HOME.
231641 05/04/11 13:30 vanoers Ion Chamber tests completed
231640 05/04/11 13:24 buddhini Target: Moved to LH2.
231639 05/04/11 13:13 rob dosimetry installed along cable tray
231638 05/04/11 13:13 magee Target GUI white out- reboot IOC
231637 05/04/11 12:25 vanoers Beam: Placing dosimeters on the cable tray close to the beam dump
231636 05/04/11 12:13 vanoers Beam: Second controlled acess this morning
231635 05/04/11 12:07 buddhini Target: Tareget screen shots
231634 05/04/11 11:38 buddhini Target: Correction: the beam on DS 0.5% C beam will be rastered (4x4 ) < 30 uA.
231633 05/04/11 11:29 buddhini Target: Target moved to DS 0.5% C target
231632 05/04/11 11:23 magee Solenoid ramping down...
231631 05/04/11 10:46 buddhini Hall is in power permit
231630 05/04/11 10:40 Ramesh Analysis: Cavity bcm calibration using run 11840
231629 05/04/11 10:23 gaskell No water leaks
231628 05/04/11 10:15 covrig small correction to owl shift summary
231627 05/04/11 09:26 buddhini Hall is in controlled access.
231626 05/04/11 09:20 buddhini QTOR ramping down to zero
231625 05/04/11 09:19 benesch right ion chamber response decayed overnight
231624 05/04/11 08:59 magee Beam down ~ hour to work on ion chambers
231623 05/04/11 08:22 magee Moller set-up
231622 05/04/11 08:22 buddhini Target: Moved to Home.
231621 05/04/11 08:21 magee Qweak HV and BMod off for Moller
231620 05/04/11 08:17 qwanalysis Analysis: Run 11853 - Plots and Summary Table for 100k Events.
231617 05/04/11 08:08 Korkmaz Shift Summary: Owl shift summary
231616 05/04/11 08:06 cdaq Beam Time Accounting
231615 05/04/11 08:02 magee Moller set-up injector parameters
231614 05/04/11 07:59 rajotte position differences flirting with 150nm again
231613 05/04/11 07:49 Korkmaz Dump right ion chamber is tripping frequently - beam current reduced
231612 05/04/11 07:43 rajotte BCM5 wrong calibration?
231610 05/04/11 07:31 Korkmaz Compton dipole trip
231609 05/04/11 07:20 Korkmaz Moller magnet trip
231608 05/04/11 07:14 L.Lee QTOR reset and back up
231605 05/04/11 06:54 qwanalysis Analysis: Run 11852 - Plots and Summary Table for 100k Events.
231603 05/04/11 06:28 Korkmaz GT an HV plots
231602 05/04/11 05:49 qwanalysis Analysis: Run 11851 - Plots and Summary Table for 100k Events.
231601 05/04/11 05:48 jhlee mark this run as "not to be analyzed"
231600 05/04/11 05:43 jhlee DAQ is working again
231598 05/04/11 05:26 Korkmaz CODA problems
231594 05/04/11 03:50 qwanalysis Analysis: Run 11848 - Plots and Summary Table for 100k Events.
231591 05/04/11 03:00 qwanalysis Analysis: Run 11846 - Plots and Summary Table for 100k Events.
231587 05/04/11 02:33 Korkmaz QTOR PS reset locally
231586 05/04/11 02:31 Korkmaz CODA crash
231585 05/04/11 02:15 Korkmaz QTOR crash
231584 05/04/11 01:19 qwanalysis Analysis: Run 11845 - Plots and Summary Table for 100k Events.
231583 05/04/11 01:09 qwanalysis Analysis: Run 11844 - Plots and Summary Table for 100k Events.
231580 05/04/11 01:05 Korkmaz run 11843 no good
231577 05/04/11 00:52 L.Lee Target: Target GUI and strip charts screenshots with beam at 165 uA
231576 05/04/11 00:47 Korkmaz Beam is back, IHWP is IN
231574 05/04/11 00:06 L.Lee Target: Target GUI and strip charts screenshots at start of owl shift
231573 05/04/11 00:02 cdaq Beam Time Accounting
231572 05/04/11 00:01 Spayde Shift Summary: 05/03/2011 Swing Shift Summary
Tuesday
231571 05/03/11 23:15 Spayde Beam: Beam Gone for Awhile
231569 05/03/11 22:58 Spayde Checklist Screenshots
231568 05/03/11 22:52 hamlet Beam: Beam quality is not good
231567 05/03/11 22:29 qwanalysis Analysis: Run 11842 - Plots and Summary Table for 100k Events.
231564 05/03/11 22:04 saw Tunsten plug water heating
231563 05/03/11 21:40 qwanalysis Analysis: Run 11841 - Plots and Summary Table for 100k Events.
231562 05/03/11 21:34 Spayde Compton: Compton DAQ Restarted
231559 05/03/11 21:25 Spayde Compton: Photon Detector HV Turned Off
231556 05/03/11 21:16 rob late entry: templeton + wilbur signal cables now pass through event-mode amplifiers
231555 05/03/11 21:16 qwanalysis Analysis: Run 11840 - Plots and Summary Table for 100k Events.
231554 05/03/11 21:15 gaskell Compton: might as well leave photon detector off
231553 05/03/11 21:09 Spayde Halo Looks Good. Compton HVs turned on.
231552 05/03/11 21:03 smithg (MANY) other cables need to be inspected
231548 05/03/11 20:55 gaskell Compton: laser off, shutter closed
231547 05/03/11 20:42 Spayde Right Dump Ion Chamber Behavior
231546 05/03/11 20:38 Spayde Beam: Beam Going Away For Awhile
231545 05/03/11 20:29 Spayde Turned Off Compton HV
231543 05/03/11 20:26 wdconinc Compton: Enabled db for data mover and happy dealer again
231542 05/03/11 20:23 hamlet Target: Target GUI and strip charts screenshots at the beam current 170 uA
231539 05/03/11 20:15 Mahoney comments of ion chambers
231537 05/03/11 20:09 Spayde Go for 170 uA
231536 05/03/11 19:54 Spayde MCC Commissioning Dump Ion Chamber
231535 05/03/11 19:32 hamlet QTOR: Changed QTOR MPS current diff yelow high limmit from 1.5 to 2.0 A
231533 05/03/11 19:14 Spayde Ramping Up QTOR
231531 05/03/11 18:10 pking Changed data tracker reaper to mark new runs as analyzable
231530 05/03/11 18:06 smithg Target: shut off 4K pump bypass
231529 05/03/11 18:05 kenyon Test Complete
231528 05/03/11 18:02 pking The cdaql6 MySQL server is back up and available; restarting DAQ and autoanalyzer processes
231525 05/03/11 16:41 covrig Target: pid temperature regulation
231524 05/03/11 16:15 saw Epics variable names for Tunsten water temps
231523 05/03/11 16:07 buddhini Injector spot move done today during beam studies.
231522 05/03/11 15:59 buddhini Shift Summary: Day shift
231521 05/03/11 15:57 buddhini HV controls and general tools
231520 05/03/11 15:57 gaskell Compton: noise in laser lock?
231519 05/03/11 15:55 cdaq Beam Time Accounting
231518 05/03/11 15:07 beaufait thermal couples on tungston plug
231517 05/03/11 14:56 Jiawei Target: Dummy window return temperature alarm
231516 05/03/11 14:46 gaskell Compton: retracted electron detector
231515 05/03/11 13:18 kenyon Diffuser chiller status
231514 05/03/11 12:54 buddhini Andy and RADCON went in to the hall and after the check they left.
231513 05/03/11 11:19 Jiawei The result of the target boiling study by varying the pump speed and raster
231512 05/03/11 10:37 buddhini Late entry: Killed CODA in preperation for Pauls work on the database.
231511 05/03/11 10:36 buddhini Events with large charge asymmetries in slug 122-123
231510 05/03/11 10:35 buddhini Ramping down QTOR to zero. Will power it off after wards.
231509 05/03/11 10:08 rob refused entry to hall
231508 05/03/11 09:50 pking Preparing to halt the cdaql6 MySQL server; Talk to Paul before running the DAQ
231507 05/03/11 09:35 pking Stopped the data tracker "reaper" process on cdaql4
231506 05/03/11 09:18 buddhini Hall in controlled access. MCC doing beam studies.
231505 05/03/11 09:12 Jiawei reset the QWIOC4 to fix the halo rate epic_scaler displayer
231504 05/03/11 09:00 jhlee stop the autoanalyzers on cdaql5.
231503 05/03/11 08:06 cdaq Beam Time Accounting
231502 05/03/11 08:00 Korkmaz Shift Summary: Owl shift summary
231501 05/03/11 07:21 benesch Beam: elog entry about ion chamber degradation
231499 05/03/11 06:47 Korkmaz Right dump chamber is dead -- no beam
231497 05/03/11 06:42 qwanalysis Analysis: Run 11836 - Plots and Summary Table for 100k Events.
231494 05/03/11 06:23 Korkmaz beam back (for now) and more insight into the diffuser problem
231491 05/03/11 06:07 Korkmaz Beam off and the "diffuser"
231490 05/03/11 05:39 qwanalysis Analysis: Run 11835 - Plots and Summary Table for 100k Events.
231489 05/03/11 05:35 L.Lee Halo rates not reading out on epics_scaler.adl
231484 05/03/11 04:30 qwanalysis Analysis: Run 11834 - Plots and Summary Table for 100k Events.
231482 05/03/11 04:19 wdconinc Compton: Data move to tape disabled
231478 05/03/11 03:58 Korkmaz GT and HV plots
231477 05/03/11 03:30 qwanalysis Analysis: Run 11833 - Plots and Summary Table for 100k Events.
231474 05/03/11 03:12 Korkmaz beam current
231471 05/03/11 02:45 qwanalysis Analysis: Run 11832 - Plots and Summary Table for 100k Events.
231470 05/03/11 02:16 Korkmaz CODA crash
231464 05/03/11 01:15 qwanalysis Analysis: Run 11830 - Plots and Summary Table for 100k Events.
231463 05/03/11 01:12 Korkmaz gun wafer
231462 05/03/11 01:10 L.Lee Target: Target GUI and strip charts screenshots (again) with beam at 170 uA
231461 05/03/11 01:02 narayan Compton: eDet plane-1 HV was -500V for this run
231459 05/03/11 00:58 L.Lee Target: Target GUI and strip charts screenshots at start of owl shift
231457 05/03/11 00:52 Korkmaz QTOR PS reset locally
231456 05/03/11 00:27 pking Analysis: Clarification: the first100k analysis should still happen for the runs tonight
231453 05/03/11 00:20 pking Run 11828 and later runs will be marked "Not to be analyzed" for tonight.
231451 05/03/11 00:08 cdaq Beam Time Accounting
231450 05/03/11 00:08 Spayde Shift Summary: 05/02/2011 Swing Shift Summary
Monday
231449 05/02/11 23:55 Spayde QTOR Failed to Ramp Up All the Way
231447 05/02/11 23:41 Spayde QTOR Crash
231444 05/02/11 23:37 manos Compton: HV gui won't stop beeping
231443 05/02/11 23:30 Spayde Changes to Dump Ion Chamber Trip Levels
231442 05/02/11 22:48 qwanalysis Analysis: Run 11828 - Plots and Summary Table for 100k Events.
231437 05/02/11 21:47 qwanalysis Analysis: Run 11827 - Plots and Summary Table for 100k Events.
231432 05/02/11 21:10 narayan Target: target stable at 175 uA
231431 05/02/11 21:04 narayan Compton: IOCHC10 went unresponsive
231430 05/02/11 20:47 gaskell Moller LHE level ok
231429 05/02/11 20:46 gaskell Moller collimators
231428 05/02/11 20:42 qwanalysis Analysis: Run 11826 - Plots and Summary Table for 100k Events.
231427 05/02/11 20:35 Spayde Beam: Raising Beam Current to 175 uA
231422 05/02/11 20:23 Spayde Shift Checklist Snapshots
231421 05/02/11 20:05 qwanalysis Analysis: Run 11825 - Plots and Summary Table for 100k Events.
231418 05/02/11 19:52 Spayde Completed BCM Calibration. Going Back to Production Running.
231415 05/02/11 19:15 narayan Compton: Electron detector moved to 'beam' position
231414 05/02/11 19:14 qwanalysis Analysis: Run 11823 - Plots and Summary Table for 100k Events.
231413 05/02/11 19:12 dunne Target: High Power PID issue
231412 05/02/11 19:11 dunne Target: High Power PID issue
231411 05/02/11 19:10 Spayde Completed Target Boiling Studies
231407 05/02/11 19:03 qwanalysis Analysis: Run 11822 - Plots and Summary Table for 100k Events.
231404 05/02/11 18:57 SMITHG Target: striptools of the 3x5 & 5x3 / pump speed scans
231402 05/02/11 18:53 qwanalysis Analysis: Run 11821 - Plots and Summary Table for 100k Events.
231399 05/02/11 18:47 qwanalysis Analysis: Run 11820 - Plots and Summary Table for 100k Events.
231396 05/02/11 18:38 qwanalysis Analysis: Run 11819 - Plots and Summary Table for 100k Events.
231393 05/02/11 18:33 qwanalysis Analysis: Run 11818 - Plots and Summary Table for 100k Events.
231392 05/02/11 18:32 manos Compton: Beam profile scan
231389 05/02/11 18:25 qwanalysis Analysis: Run 11817 - Plots and Summary Table for 100k Events.
231384 05/02/11 18:18 qwanalysis Analysis: Run 11816 - Plots and Summary Table for 100k Events.
231383 05/02/11 18:15 qwanalysis Analysis: Run 11815 - Plots and Summary Table for 100k Events.
231380 05/02/11 18:08 narayan Target: lowered the LO alarm limit on h2 pump head differential pressure
231377 05/02/11 18:03 qwanalysis Analysis: Run 11814 - Plots and Summary Table for 100k Events.
231374 05/02/11 17:55 qwanalysis Analysis: Run 11813 - Plots and Summary Table for 100k Events.
231371 05/02/11 17:47 qwanalysis Analysis: Run 11812 - Plots and Summary Table for 100k Events.
231368 05/02/11 17:39 qwanalysis Analysis: Run 11811 - Plots and Summary Table for 100k Events.
231365 05/02/11 17:32 qwanalysis Analysis: Run 11810 - Plots and Summary Table for 100k Events.
231362 05/02/11 17:26 rajotte Target beam parameter added to the last 24 runs plots
231361 05/02/11 17:24 qwanalysis Analysis: Run 11809 - Plots and Summary Table for 100k Events.
231358 05/02/11 17:20 qwanalysis Analysis: Run 11806 - Plots and Summary Table for 100k Events.
231357 05/02/11 17:16 qwanalysis Analysis: Run 11808 - Plots and Summary Table for 100k Events.
231353 05/02/11 17:08 qwanalysis Analysis: Run 11807 - Plots and Summary Table for 100k Events.
231348 05/02/11 16:52 qwanalysis Analysis: Run 11805 - Plots and Summary Table for 100k Events.
231345 05/02/11 16:45 Spayde Beam: Back to 170 uA. Starting Target Boiling Studies and BCM Calibration.
231343 05/02/11 16:32 Spayde Beam: MCC Sending Tune Beam to Hall
231342 05/02/11 16:03 cdaq Beam Time Accounting
231341 05/02/11 15:39 manos Beam: X-position differences at the target
231340 05/02/11 15:37 M Jones Shift Summary: Day Shift summary
231339 05/02/11 15:09 M Jones HV and GT
231338 05/02/11 15:08 pking The cdaql6 MySQL server will be taken down about 10:00 tomorrow
231337 05/02/11 14:33 M Jones Finished with Moller. Waiting for beam
231336 05/02/11 14:15 magee/rakith Moller collimators moved
231335 05/02/11 14:14 Solvignon Solenoid Cryo at 0.00%. Is it real ?
231334 05/02/11 12:30 brads Disk space on /group/qweak/ and /net/cdaqfs/scratch/ running out -- PLEASE CLEAN UP OLD FILES
231333 05/02/11 12:23 M Jones Escorted access to reset Moller collimator power supply
231332 05/02/11 12:10 birchall Target: Moved LH2 target into beam position
231331 05/02/11 12:09 M Jones Qweak HV back ON and Beam Mod back ON
231330 05/02/11 12:07 rakithab/mag Analysis: Moller Polarization Results
231329 05/02/11 12:04 magee Compton electron detector still OUT
231328 05/02/11 11:51 magee BCM2 to gain setting 2
231327 05/02/11 11:48 magee Moller measurement concluded - backing out
231324 05/02/11 11:19 rakithab IHWP is OUT now
231314 05/02/11 10:38 rakithab Moller BPM positions
231307 05/02/11 09:02 Solvignon Rebooted Moller crate
231305 05/02/11 08:42 birchall Target: Target moved to out for beam for Moller measurement
231303 05/02/11 08:41 Solvignon Moller setup
231302 05/02/11 08:37 M Jones Turn off off HV and beam modulation for Moller setup
231300 05/02/11 08:35 Solvignon Beam parameters prior to Moller measurement
231299 05/02/11 08:06 Korkmaz Shift Summary: Owl shift summary -- please ignore entry 231298 (submitted by mistake)
231298 05/02/11 07:50 Shift Summary: Owl shift summary
231297 05/02/11 07:41 qwanalysis Analysis: Run 11804 - Plots and Summary Table for 100k Events.
231292 05/02/11 07:27 L.Lee Target: Ask MCC to lower ramp rate due to HiPowerHtr alarms on beam recovery
231291 05/02/11 07:11 cdaq Beam Time Accounting
231290 05/02/11 06:43 qwanalysis Analysis: Run 11803 - Plots and Summary Table for 100k Events.
231289 05/02/11 06:30 Korkmaz Beam is back
231286 05/02/11 06:20 Korkmaz beam status
231285 05/02/11 05:06 Korkmaz Beam will be off for a while
231280 05/02/11 04:17 qwanalysis Analysis: Run 11802 - Plots and Summary Table for 100k Events.
231279 05/02/11 04:14 Korkmaz GT and HV
231274 05/02/11 03:09 qwanalysis Analysis: Run 11801 - Plots and Summary Table for 100k Events.
231271 05/02/11 02:19 qwanalysis Analysis: Run 11800 - Plots and Summary Table for 100k Events.
231266 05/02/11 01:11 qwanalysis Analysis: Run 11799 - Plots and Summary Table for 100k Events.
231264 05/02/11 00:54 Korkmaz FlipPCValues just before run 11799
231260 05/02/11 00:15 L.Lee Target: Target GUI and strip charts screenshots at start of owl shift
231259 05/02/11 00:03 cdaq Beam Time Accounting
231258 05/02/11 00:03 narayan Target: beam current increased to 175 uA
231257 05/02/11 00:02 Spayde Shift Summary: Swing Shift Summary 05/01/2011
Sunday
231256 05/01/11 23:58 jhlee bcm1 and fastfeedback status from 22:00
231255 05/01/11 23:57 qwanalysis Analysis: Run 11798 - Plots and Summary Table for 100k Events.
231254 05/01/11 23:49 manos Compton: Anode current at 175uA and 1850V still safe
231252 05/01/11 23:43 Spayde Beam: Raised Beam Current to 175 uA
231248 05/01/11 23:36 jhlee re:DAQ Crash at End of Run 11796
231247 05/01/11 23:25 manos Large variation in MS interception when rates changed.
231246 05/01/11 23:23 Spayde Beam: Raised Beam Current to 170 uA
231245 05/01/11 23:11 Spayde Beam: Halo and Compton Scintillator Rates Degraded/Fast Feedback Values Gone Wonky
231244 05/01/11 22:54 qwanalysis Analysis: Run 11797 - Plots and Summary Table for 100k Events.
231243 05/01/11 22:52 Spayde DAQ Crash at End of Run 11796
231239 05/01/11 21:45 manos Compton: HV scan: Photon detector HV 1850V
231237 05/01/11 21:37 qwanalysis Analysis: Run 11796 - Plots and Summary Table for 100k Events.
231233 05/01/11 21:12 Spayde General Tools/HV GUI Screenshot
231232 05/01/11 20:40 qwanalysis Analysis: Run 11795 - Plots and Summary Table for 100k Events.
231231 05/01/11 20:27 Spayde Beam: Beam is Back
231227 05/01/11 20:03 Spayde Ramped QTOR to 8921 A
231225 05/01/11 19:55 Spayde Beam: Beam Down for 5 Minutes
231222 05/01/11 19:15 qwanalysis Analysis: Run 11794 - Plots and Summary Table for 100k Events.
231221 05/01/11 19:04 Spayde QTOR to 8966 A
231218 05/01/11 18:30 Spayde Good Conditions?
231217 05/01/11 18:15 qwanalysis Analysis: Run 11793 - Plots and Summary Table for 100k Events.
231215 05/01/11 18:03 Spayde Beam: MCC Sending Beam Back
231211 05/01/11 17:58 Spayde Beam: MCC Taking Beam Away
231210 05/01/11 17:36 Spayde Beam: Beam at 140 uA for Diagnostics
231209 05/01/11 17:35 manos Compton: Vertical scan, HV back to 1800V, transmition loss related to orbit lock.
231208 05/01/11 17:28 qwanalysis Analysis: Run 11792 - Plots and Summary Table for 100k Events.
231204 05/01/11 16:58 Spayde Beam: Reduced Beam Current for Vertical Scan
231203 05/01/11 16:44 qwanalysis Analysis: Run 11791 - Plots and Summary Table for 100k Events.
231202 05/01/11 16:38 Spayde Beam: Vertical Scan in the Chicane
231198 05/01/11 16:02 cdaq Beam Time Accounting
231197 05/01/11 16:01 M Jones Shift Summary: Day Shift summary
231194 05/01/11 15:59 Pitt Target: End of day shift screenshot
231193 05/01/11 15:41 qwanalysis Analysis: Run 11790 - Plots and Summary Table for 100k Events.
231192 05/01/11 15:33 M Jones HV and GT screens
231191 05/01/11 15:30 gaskell Compton: flipper mount not moving
231189 05/01/11 15:26 qwanalysis Analysis: Run 11789 - Plots and Summary Table for 100k Events.
231185 05/01/11 15:15 another EB4 crash at en of run
231184 05/01/11 15:13 M JOnes IHWP = OUT , FlipPCValues
231180 05/01/11 15:08 narayan Compton: (late entry) During Run 21875, Scintillator rates came down to 40
231179 05/01/11 14:23 qwanalysis Analysis: Run 11788 - Plots and Summary Table for 100k Events.
231174 05/01/11 13:11 qwanalysis Analysis: Run 11787 - Plots and Summary Table for 100k Events.
231169 05/01/11 12:30 narayan Compton: Run 21869 - 21875 : incorrect eDet HV in Run comment
231168 05/01/11 12:28 Pitt Summary of recent halo and Compton scintillator rate improvements
231167 05/01/11 12:13 Benesch Beam: Yan Wang solved Compton background: Hall C laser phase
231166 05/01/11 11:52 qwanalysis Analysis: Run 11786 - Plots and Summary Table for 100k Events.
231165 05/01/11 11:45 qwanalysis Analysis: Run 11785 - Plots and Summary Table for 100k Events.
231164 05/01/11 11:43 M Jones During Run 11785 MCC improving injector optics by injector autosteer
231155 05/01/11 11:27 qwanalysis Analysis: Run 11784 - Plots and Summary Table for 100k Events.
231150 05/01/11 11:03 PItt More on halo rates - no change observed Saturday when Hall A went to 120 uA
231149 05/01/11 10:59 Pitt Discrete change in halo rates was when Hall A turned back on
231148 05/01/11 10:34 qwanalysis Analysis: Run 11783 - Plots and Summary Table for 100k Events.
231147 05/01/11 10:29 Pitt Halo rates increasing
231146 05/01/11 10:13 qwanalysis Analysis: Run 11782 - Plots and Summary Table for 100k Events.
231141 05/01/11 09:50 M Jones End of run is failing, restart CODA
231137 05/01/11 09:08 qwanalysis Analysis: Run 11781 - Plots and Summary Table for 100k Events.
231136 05/01/11 08:52 qwanalysis Analysis: Run 11780 - Plots and Summary Table for 100k Events.
231133 05/01/11 08:38 M JOnes Restarted coda
231132 05/01/11 08:30 M JOnes Beam off for about 15min
231131 05/01/11 08:29 M JOnes Run 11780 was only prestarted at 4:30am. GO was done at 8:08
231129 05/01/11 08:21 manos Owl shift summary
231128 05/01/11 08:05 cdaq Beam Time Accounting
231127 05/01/11 08:05 Pitt Target: Target screenshots - with pictures this time
231126 05/01/11 08:02 Pitt Target: Beginning of day shift screenshots
231125 05/01/11 05:34 manos Owl shift screenshots
231123 05/01/11 04:29 manos Beam still down
231121 05/01/11 03:59 manos Arc 5 tripped again. Down for some time.
231120 05/01/11 03:53 manos MCC still down, even though MCC called to tell us they solved the problem
231118 05/01/11 03:31 manos Large Aq in this run
231116 05/01/11 03:28 manos Beam down again
231115 05/01/11 03:17 qwanalysis Analysis: Run 11779 - Plots and Summary Table for 100k Events.
231112 05/01/11 03:05 manos Beam back
231111 05/01/11 02:56 manos Beam down for a while
231110 05/01/11 02:39 cdaq Run 11778 Pedestal Data
231105 05/01/11 01:54 qwanalysis Analysis: Run 11777 - Plots and Summary Table for 100k Events.
231104 05/01/11 01:53 manos FlipPCValues output
231102 05/01/11 01:31 manos IHWP --> IN
231098 05/01/11 00:43 Jiawei It seems that bcm2 caused the DD width increased
231097 05/01/11 00:41 qwanalysis Analysis: Run 11776 - Plots and Summary Table for 100k Events.
231094 05/01/11 00:17 L.Lee Target: Target GUI and strip charts screen shots at start of owl shift.
231092 05/01/11 00:03 cdaq Beam Time Accounting
231091 05/01/11 00:02 Spayde Shift Summary: Swing Shift Summary