Difference between revisions of "Pin Plan of v1495"

From PolWiki
Jump to navigationJump to search
 
(One intermediate revision by the same user not shown)
Line 9: Line 9:
 
Pin 1 is indicated by a white arrow on the port of v1495. The pattern in which signals are given into the pins are as follows:
 
Pin 1 is indicated by a white arrow on the port of v1495. The pattern in which signals are given into the pins are as follows:
 
    
 
    
−
{| style="color:blue; background-color:#fffbcc;" cellpadding="10" cellspacing="0" border="1"
+
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
 
! pin #: DD strip #
 
! pin #: DD strip #
 
! pin #: DD strip #
 
! pin #: DD strip #
Line 67: Line 67:
  
 
The C-port outputs to Master board the following signals
 
The C-port outputs to Master board the following signals
−
{| style="color:blue; background-color:#fffbcc;" cellpadding="10" cellspacing="0" border="1"
+
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
 
! pin #
 
! pin #
 
! corresponding signal
 
! corresponding signal
Line 96: Line 96:
  
 
The F-port is set to receives NIM based input signals(originated from TS)
 
The F-port is set to receives NIM based input signals(originated from TS)
−
{| style="color:blue; background-color:#fffbcc;" cellpadding="10" cellspacing="0" border="1"
+
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
 
! pin #
 
! pin #
 
! corresponding signal
 
! corresponding signal
Line 117: Line 117:
  
 
The G-port set for receiving NIM input signals (originated from Master v1495)
 
The G-port set for receiving NIM input signals (originated from Master v1495)
−
{| style="color:blue; background-color:#fffbcc;" cellpadding="10" cellspacing="0" border="1"
+
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
 
! pin #
 
! pin #
 
! corresponding signal
 
! corresponding signal
Line 130: Line 130:
 
==== Master board ====
 
==== Master board ====
  
−
The signals from [[Nomenclature_Conventions | patch1]](slave-1) and [[Nomenclature_Conventions | patch2]](slave-2) will be ported to '''A-port''' of the master board.
+
The signals from [[Nomenclature_Conventions | patch1]](slave-1) will be ported to '''A-port''' of the master board.
−
0th pin   : if patch1 in the detector planes independently got a good trigger
+
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
−
1-4 pins  : the hit-information in the top most strip of patch1 in planes 1-4 respectively.
+
! pin #
−
5-8 pins  : the hit-information in the bottom most strip of patch1 in planes 1-4 respectively
+
! corresponding signal
−
9-22 pins : floating
+
|-
−
16th pin  : if patch2 in the detector planes independently got a good trigger.
+
|A(0)
−
17-20 pins: the hit-information in the top most strip of patch2 in planes 1-4 respectively.
+
|independent event trigger in strips 1-32
−
21-24 pins: the hit-information in the bottom most strip of patch2 in planes 1-4 respectively
+
|-
 +
|A(1)
 +
|OR of strips 1-4 on plane 1
 +
|-
 +
|A(2)
 +
|OR of strips 1-4 on plane 2
 +
|-
 +
|A(3)
 +
|OR of strips 1-4 on plane 3
 +
|-
 +
|A(4)
 +
|OR of strips 1-4 on plane 4
 +
|-
 +
|A(5)
 +
|OR of strips 28-32 on plane 1
 +
|-
 +
|A(6)
 +
|OR of strips 28-32 on plane 2
 +
|-
 +
|A(7)
 +
|OR of strips 28-32 on plane 3
 +
|-
 +
|A(8)
 +
|OR of strips 28-32 on plane 4
 +
|-
 +
|A(9)
 +
|independent accumulation trigger in strips 1-32
 +
|-
 +
|A(15)
 +
|buffer of slave-1 busy(half-full)
 +
|}
 +
 
 +
----
 +
 
 +
The signals from [[Nomenclature_Conventions | patch2]](slave-2) will be ported to '''B-port''' of the master board.
 +
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
 +
! pin #
 +
! corresponding signal
 +
|-
 +
|B(0)
 +
|independent event trigger in strips 33-64
 +
|-
 +
|B(1)
 +
|OR of strips 33-36 on plane 1
 +
|-
 +
|B(2)
 +
|OR of strips 33-36 on plane 2
 +
|-
 +
|B(3)
 +
|OR of strips 33-36 on plane 3
 +
|-
 +
|B(4)
 +
|OR of strips 33-36 on plane 4
 +
|-
 +
|B(5)
 +
|OR of strips 61-64 on plane 1
 +
|-
 +
|B(6)
 +
|OR of strips 61-64 on plane 2
 +
|-
 +
|B(7)
 +
|OR of strips 61-64 on plane 3
 +
|-
 +
|B(8)
 +
|OR of strips 61-64 on plane 4
 +
|-
 +
|B(9)
 +
|independent accumulation trigger in strips 33-64
 +
|-
 +
|B(15)
 +
|buffer of slave-2 busy(half-full)
 +
|}
 +
 
 +
----
 +
 
 +
The signals from [[Nomenclature_Conventions | patch3]](slave-3) will be ported to '''D-port''' of the master board.
 +
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
 +
! pin #
 +
! corresponding signal
 +
|-
 +
|D(0)
 +
|independent event trigger in strips 65-96
 +
|-
 +
|D(1)
 +
|OR of strips 65-68 on plane 1
 +
|-
 +
|D(2)
 +
|OR of strips 65-68 on plane 2
 +
|-
 +
|D(3)
 +
|OR of strips 65-68 on plane 3
 +
|-
 +
|D(4)
 +
|OR of strips 65-68 on plane 4
 +
|-
 +
|D(5)
 +
|OR of strips 93-96 on plane 1
 +
|-
 +
|D(6)
 +
|OR of strips 93-96 on plane 2
 +
|-
 +
|D(7)
 +
|OR of strips 93-96 on plane 3
 +
|-
 +
|D(8)
 +
|OR of strips 93-96 on plane 4
 +
|-
 +
|D(9)
 +
|independent accumulation trigger in strips 65-96
 +
|-
 +
|D(15)
 +
|buffer of slave-3 busy(half-full)
 +
|}
 +
 
 +
Rest all pins are floating
  
−
The signal cluster from [[Nomenclature_Conventions | patch3]](slave-3) will be ported to '''B-port''' of the master board where
+
----
−
0th pin  : if patch3 in the detector planes independently got a good trigger
 
−
1-4 pins : the hit-information in the top most strip of patch3 in planes 1-4 respectively.
 
−
5-8 pins : the hit-information in the bottom most strip of patch3 in planes 1-4 respectively
 
−
Rest all pins are floating
 
  
 
The C-port is a fixed output port and is currently unused.
 
The C-port is a fixed output port and is currently unused.
 +
 +
----
  
 
The '''E-port''' is used as an input port for following NIM signals:  
 
The '''E-port''' is used as an input port for following NIM signals:  
−
pin 0 (physically top): MPS input from Injector Helicity Board or TS.
+
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
−
pin 1-7  : floating.
+
! pin #
 +
! corresponding signal
 +
|-
 +
|E(0)
 +
|Latch
 +
|}
 +
 
 +
----
  
 
The '''F-port''' is used as an output port for following NIM signals:
 
The '''F-port''' is used as an output port for following NIM signals:
−
pin 0(physical top): Global clock, output to the G(0) port of s1
+
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
−
pin 1: Global clock, output to the G(0) port of s2
+
! pin #
−
pin 2: Global clock, output to the G(0) port of s3
+
! corresponding signal
−
pin 3: Hit trigger for Accumulator going to s1
+
|-
−
pin 4: Hit trigger for Accumulator going to s2
+
|F(7)
−
pin 5: Hit trigger for Accumulator going to s3
+
|slave-1 buffer busy
−
pin 6: logic-0 (unused)
+
|-
−
pin 7(physical bottom): carrying logic-0 (unused)
+
|F(6)
 +
|slave-2 buffer busy
 +
|-
 +
|F(5)
 +
|slave-3 buffer busy
 +
|-
 +
|F(4)
 +
|global clock
 +
|-
 +
|F(3)
 +
|global clock
 +
|-
 +
|F(2)
 +
|global clock
 +
|-
 +
|F(1)
 +
|global clock
 +
|-
 +
|F(0)
 +
|global clock
 +
|}
  
−
The '''G-port''' is used as NIM output:
+
----
−
pin 0(physical left): MPS (Latch) signal going to the TS
+
 
−
pin 1(physical right): Hit trigger for Event-mode going to TS
+
The '''G-port''' is used as an output port for following NIM signals:
 +
{| style="color:maroon; background-color:#ffffff;" cellpadding="10" cellspacing="0" border="1"
 +
! pin #
 +
! corresponding signal
 +
|-
 +
|G(0)
 +
|final Accumulation Trigger
 +
|-
 +
|G(1)
 +
|final Event Trigger
 +
|}

Latest revision as of 18:58, 3 March 2010

Note: Please go through the nomenclature conventions to follow this section clearly.

While programming the firmware, the Pin plan has been assumed. All signals unless otherwise specified are LVDS.

Slave board

Slave-1: The A, B, D and E ports take LVDS, 32 bit input signal information from the top 32 strips of planes 1, 2, 3 and 4 respectively.

Pin 1 is indicated by a white arrow on the port of v1495. The pattern in which signals are given into the pins are as follows:

pin #: DD strip # pin #: DD strip #
A(32): strip 32 A(16): strip 31
A(31): strip 30 A(15): strip 29
A(30): strip 28 A(14): strip 27
A(29): strip 26 A(13): strip 25
A(28): strip 24 A(12): strip 23
A(27): strip 22 A(11): strip 21
A(26): strip 20 A(10): strip 19
A(25): strip 18 A(9): strip 17
A(24): strip 16 A(8): strip 15
A(23): strip 14 A(7): strip 13
A(22): strip 12 A(6): strip 11
A(21): strip 10 A(5): strip 9
A(20): strip 8 A(4): strip 7
A(19): strip 6 A(3): strip 5
A(18): strip 4 A(2): strip 3
A(16): strip 2 A(1): strip 1

The B, D and E follow the exact same pattern as A port.

The C-port outputs to Master board the following signals

pin # corresponding signal
C(31)-C(16) unused, carrying logic-0
C(15) buffer is Full
C(14)-C(10) unused, carrying logic-0
C(9) accumulation pre-trigger in this slave
C(8)-C(5) hit information of bottom 4 channels
C(4)-C(1) hit information of top 4 channels
C(0) event pre-trigger in this slave

The F-port is set to receives NIM based input signals(originated from TS)

pin # corresponding signal
F(7)-F(3) unused
F(2) Event mode trigger
F(1) Accumulation mode trigger
F(0) Helicity


The G-port set for receiving NIM input signals (originated from Master v1495)

pin # corresponding signal
G(1) MPS
G(0) Global Clock

Master board

The signals from patch1(slave-1) will be ported to A-port of the master board.

pin # corresponding signal
A(0) independent event trigger in strips 1-32
A(1) OR of strips 1-4 on plane 1
A(2) OR of strips 1-4 on plane 2
A(3) OR of strips 1-4 on plane 3
A(4) OR of strips 1-4 on plane 4
A(5) OR of strips 28-32 on plane 1
A(6) OR of strips 28-32 on plane 2
A(7) OR of strips 28-32 on plane 3
A(8) OR of strips 28-32 on plane 4
A(9) independent accumulation trigger in strips 1-32
A(15) buffer of slave-1 busy(half-full)

The signals from patch2(slave-2) will be ported to B-port of the master board.

pin # corresponding signal
B(0) independent event trigger in strips 33-64
B(1) OR of strips 33-36 on plane 1
B(2) OR of strips 33-36 on plane 2
B(3) OR of strips 33-36 on plane 3
B(4) OR of strips 33-36 on plane 4
B(5) OR of strips 61-64 on plane 1
B(6) OR of strips 61-64 on plane 2
B(7) OR of strips 61-64 on plane 3
B(8) OR of strips 61-64 on plane 4
B(9) independent accumulation trigger in strips 33-64
B(15) buffer of slave-2 busy(half-full)

The signals from patch3(slave-3) will be ported to D-port of the master board.

pin # corresponding signal
D(0) independent event trigger in strips 65-96
D(1) OR of strips 65-68 on plane 1
D(2) OR of strips 65-68 on plane 2
D(3) OR of strips 65-68 on plane 3
D(4) OR of strips 65-68 on plane 4
D(5) OR of strips 93-96 on plane 1
D(6) OR of strips 93-96 on plane 2
D(7) OR of strips 93-96 on plane 3
D(8) OR of strips 93-96 on plane 4
D(9) independent accumulation trigger in strips 65-96
D(15) buffer of slave-3 busy(half-full)

Rest all pins are floating

The C-port is a fixed output port and is currently unused.

The E-port is used as an input port for following NIM signals:

pin # corresponding signal
E(0) Latch

The F-port is used as an output port for following NIM signals:

pin # corresponding signal
F(7) slave-1 buffer busy
F(6) slave-2 buffer busy
F(5) slave-3 buffer busy
F(4) global clock
F(3) global clock
F(2) global clock
F(1) global clock
F(0) global clock

The G-port is used as an output port for following NIM signals:

pin # corresponding signal
G(0) final Accumulation Trigger
G(1) final Event Trigger
Retrieved from "https://hallcweb-2024.jlab.org/polwiki/index.php?title=Pin_Plan_of_v1495&oldid=141"