Difference between revisions of "E-Detector Motion System"
From PolWiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
| − | * The electron detector is connected to the QWAD using the custom made Flex-cable. The detector is placed inside the vacuum-can whereas the QWAD is placed outside using appropriate flanges used between the Flex-cable and the QWAD. | + | * The electron detector is connected to the QWAD using the custom made Flex-cable. The detector is placed inside the vacuum-can whereas the QWAD is placed outside using appropriate flanges used between the Flex-cable and the QWAD. The connection between e-detector and the QWAD (if the vacuum - can was transparent) can be depicted as in the [[Media:EDet-QWAD layout in Vacuum-can.jpg | attached picture]]. |
| − | + | ||
* The electron detector is moved in and out of the beam by the motion system showed below: | * The electron detector is moved in and out of the beam by the motion system showed below: | ||
[[Image:EDet_Motion_Mechanism.jpg | 600px]] | [[Image:EDet_Motion_Mechanism.jpg | 600px]] | ||
Revision as of 23:44, 16 August 2010
- The electron detector is connected to the QWAD using the custom made Flex-cable. The detector is placed inside the vacuum-can whereas the QWAD is placed outside using appropriate flanges used between the Flex-cable and the QWAD. The connection between e-detector and the QWAD (if the vacuum - can was transparent) can be depicted as in the attached picture.
- The electron detector is moved in and out of the beam by the motion system showed below:
