Difference between revisions of "E-Detector Motion System"
From PolWiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
* The electron detector is connected to the QWAD using the custom made Flex-cable. The detector is placed inside the vacuum-can whereas the QWAD is placed outside using appropriate flanges used between the Flex-cable and the QWAD. The connection between e-detector and the QWAD (if the vacuum - can was transparent) can be depicted as in the [[Media:EDet-QWAD layout in Vacuum-can.jpg | attached picture]]. | * The electron detector is connected to the QWAD using the custom made Flex-cable. The detector is placed inside the vacuum-can whereas the QWAD is placed outside using appropriate flanges used between the Flex-cable and the QWAD. The connection between e-detector and the QWAD (if the vacuum - can was transparent) can be depicted as in the [[Media:EDet-QWAD layout in Vacuum-can.jpg | attached picture]]. | ||
| − | + | * The electron detector vacuum - can has a motion mechanism to allow us to move the detector vertically in and out of the beam along with the ability to rotate the detector facing the beam. A schematic view of the assembly can be seen [[Media:EDet_Motion_Mechanism.jpg | here]]. | |
| − | * The electron detector | ||
| − | |||
Revision as of 23:52, 16 August 2010
- The electron detector is connected to the QWAD using the custom made Flex-cable. The detector is placed inside the vacuum-can whereas the QWAD is placed outside using appropriate flanges used between the Flex-cable and the QWAD. The connection between e-detector and the QWAD (if the vacuum - can was transparent) can be depicted as in the attached picture.
- The electron detector vacuum - can has a motion mechanism to allow us to move the detector vertically in and out of the beam along with the ability to rotate the detector facing the beam. A schematic view of the assembly can be seen here.
