Difference between revisions of "Electron Detector"
From PolWiki
Jump to navigationJump to search| Line 3: | Line 3: | ||
# [[Shielded Flex Cables]] | # [[Shielded Flex Cables]] | ||
# [[Q-Weak Amplifier Discriminator]] | # [[Q-Weak Amplifier Discriminator]] | ||
| − | |||
| − | |||
| − | |||
| − | |||
* Shielded FLEX cables : We use costume made flexible printed circuit board to pass the detector signal to the Q-Weak Amplifier Discriminator. These are flexible along the length only. | * Shielded FLEX cables : We use costume made flexible printed circuit board to pass the detector signal to the Q-Weak Amplifier Discriminator. These are flexible along the length only. | ||
Revision as of 01:37, 5 March 2010
- Shielded FLEX cables : We use costume made flexible printed circuit board to pass the detector signal to the Q-Weak Amplifier Discriminator. These are flexible along the length only.
:Connecting the Flex cable between Diamond Detector and QWAD
:limited flexibility of FLEX cables
- Q-Weak Amplifier Discriminator.
- The electron detector is moved in and out of the beam by the motion system showed below:
- The electron detector system is described in the figured below. The DAQ setup can be found on the Qweak wiki at [Qweak electron detector setup].
