Difference between revisions of "Electron Detector"

Revision as of 01:38, 5 March 2010

The electron detector is moved in and out of the beam by the motion system showed below:

The electron detector system is described in the figured below. The DAQ setup can be found on the Qweak wiki at [Qweak electron detector setup].

@@ Line 3: / Line 3: @@
 # [[Shielded Flex Cables]]
 # [[Q-Weak Amplifier Discriminator]]
-* Shielded FLEX cables : We use costume made flexible printed circuit board to pass the detector signal to the Q-Weak Amplifier Discriminator. These are flexible along the length only.
-  :Connecting the Flex cable between Diamond Detector and QWAD
-  [[Image:Flex_004.JPG|1050px]]
- :limited flexibility of FLEX cables
-  [[Image:Flex_005.JPG|1050px]]
 * Q-Weak Amplifier Discriminator.