Difference between revisions of "Moller Polarimeter/NPS"

From PolWiki
Jump to navigationJump to search
Line 22: Line 22:
 
* Runs on 9/22/2023 (QE=0.3215%)
 
* Runs on 9/22/2023 (QE=0.3215%)
 
<pre>
 
<pre>
Run   Pol (%)  Error (%) Hwien    Energy(MeV)    Comment
+
Run   Pol (%)  Error (%) Hwien    HALC:p(MeV)    Comment
 
1787      -        -          -48.3    -              First run after gain matching calorimeters, 1 um foil
 
1787      -        -          -48.3    -              First run after gain matching calorimeters, 1 um foil
 
1788      -        -          -48.3    -              Changed ADC/TDC prescale
 
1788      -        -          -48.3    -              Changed ADC/TDC prescale

Revision as of 11:42, 9 October 2023

Moller measurement summaries for NPS

This is the "Cliff notes" section on Moller polarimetry runs during NPS Running.

Note on sign of polarization [1]

Note that this is the first experiment to use the new cryogen-free superconducting target magnet.

September 22, 2023

  • IHWP IN: P = -80.14 +/- 0.54 %
  • IHWP OUT: P = 80.55 +/- 0.58 %
Run	  Pol (%)   Error (%)	Hwien     HALC:p(MeV)     Comment
1787      -         -           -48.3     -               First run after gain matching calorimeters, 1 um foil
1788      -         -           -48.3     -               Changed ADC/TDC prescale
1789      -         -           -48.3     -               All scintillators turned on
1790      -         -           -48.3     -               Q3 reduced from 1338 to 1318 A
1791      -         -           -48.3     -               Changed memory delay from 4->3
1792      -         -           -48.3     -               Changed memory delay from 3->5
1793      -         -           -48.3     -               junk
1794      -         -           -48.3     -               After rebooting all
1795      -         -           -48.3     -               Added delay to memory strobe (16 ns, 8 ns)
1796      -         -           -48.3     -               Changed defaults in CRL
1797      -         -           -48.3     -               Set memory delay to 7 (WSI was unplugged - woops)
1798      -         -           -48.3     -               Delay=7
1799      -         -           -48.3     -               Delay=3
1800      -         -           -48.3     -               Delay=2
1801      -         -           -48.3     -               Delay=4, 4 um target
1802      -         -           -48.3     -               changed prescale
1803     -79.93     0.77        -48.3     10539.04        IHWP=IN
1804     -80.18     0.77        -48.3     10538.97        IHWP=IN
1805      80.18     0.82        -48.3     10538.83        IHWP=IN
1806      78.62     2.84        -48.3     10539.53        IHWP=IN
1807      81.13     0.86        -48.3     10539.14        IHWP=IN