Electron Detector

1. Diamond strip electron detector
2. Test Box
3. Shielded Flex Cables
4. Q-Weak Amplifier Discriminator

• Currently it is being tested in a test box made at MSU

• Shielded FLEX cables : We use costume made flexible printed circuit board to pass the detector signal to the Q-Weak Amplifier Discriminator. These are flexible along the length only.

 :Connecting the Flex cable between Diamond Detector and QWAD
 

:limited flexibility of FLEX cables
 

• Q-Weak Amplifier Discriminator.

• The electron detector is moved in and out of the beam by the motion system showed below:

• The electron detector system is described in the figured below. The DAQ setup can be found on the Qweak wiki at [Qweak electron detector setup].