View source for Pol He-3 Target Motion Reset

To reset the hall C target motion, several devices need to be rebooted.

'''WARNING: After iochc26 boots up, the target will home itself, so you need to mask the FSD first!!'''

# First, use hcreboot5 to '''turn off''' the iochc26 VME crate and '''leave it off for now''' (outlet 2).
# Next, use hcreboot6 to reboot
## portservhc26 (outlet 1) and 
## the VXM-1 Motor controller (outlet 2). 
## Wait 60 seconds for the portserver to boot up.
# Finally, use hcreboot5 to turn iochc26 (outlet 2 again) back on. The IOC will take a few minutes to boot up completely.  When it does, the white fields in the alarm handler and Target motion control GUI will go back to their regular colors.
# Click the 'Initialize' button at the top of the Target Motion Control GUI and wait for the process to complete.
# Move to your chosen target position and '''verify that the 'Encoder Readout (volts)' field matches the setting you expect listed next to the vertical target position bar!'''