View source for F2/EMC analysis how-to for shift takers

=='''Instructions for online analysis of F2/EMC Experiments (E12-10-002/E12-10-008)'''==
------------------------------------------------
1. We would like to keep the deadtime below 20 % so make sure to prescale accordingly before you start a run. That basically means to keep the DAQ target rate below 2000 Hz (look at the prescale gui that's in the DAQ VNC session.)

------------------------------------------------

<span style="color: red>2. Once you accumulated 50 K CODA events (50000 CODA events): </span>

   for SHMS detector checks: ./run_shms.sh <run_number>

   for HMS detector checks: ./run_hms.sh <run_number>


<span style="color: blue>--> This will bring up the online GUI for you to do detector sanity checks. Look carefully at all histograms and compare to the golden run which you can find in the binder.</span>


<span style="color: blue>--> It will also bring up an emacs window where you can check: current, trigger type, trigger and tracking efficiencies </span>


As an example, this is what you would find in this emacs window:

Run #:  2081

BCM1 Current:  34.886 uA		  

BCM2 Current:  35.742 uA		 

BCM4a Current:  34.168 uA		  

Pre-Scale SHMS 3/4 : -1

Pre-Scale SHMS EL-Real : -1 <span style="color: red>--> this should be different than -1 (all the rest -1) when we take neg polarity runs</span>

Pre-Scale SHMS EL-clean : 5 <span style="color: red>--> this should be different than -1 (all the rest -1) when we take pos polarity runs</span>

Pre-Scaled Ps1 SHMS Computer Live Time :  -0.6279 %

Pre-Scaled Ps2 SHMS Computer Live Time :  -3.2613 % <span style="color: red>--> this should be larger than 80% if we take neg polarity runs</span>

Pre-Scaled Ps3 SHMS Computer Live Time :  98.5311 % <span style="color: red>--> this should be larger than 80% if we take pos polarity runs</span>

SING FID TRACK EFFIC           :    0.8380 +-   0.0097

E SING FID TRACK EFFIC         :    0.8417 +-   0.0100

Plane 1:  0.997916

Plane 2:  0.996795

Plane 3:  0.991199

Plane 4:  0.976989

3_of_4 EFF : <span style="color: red>--> this should be larger than 99.5% typically</span>  



<span style="color: blue>--> Once you close the emacs window another script will run without you doing anything. Watch what's printed on the screen at the end: this should give you an idea if the PID legs pedestals have drifted compared to the golden run. If they did, ** shout **. This would need to be fixed ASAP as it affects the efficiency of our PID-dependent trigger (remember: for production we run with ELREAL or ELCLEAN).</span>


As an example, this is how it would look:

!!!!!!!!!!!!!!!!!!!!!!!!!!!Attention Needed !!!!!!!!!!!!!!!!!!!!!
_____________________________________________________________________

--------------------See ROC2 --- SLOT 14---------------------------

-----SEE THE PROBLEMATIC CHANNELS FOR SHMS TRIGGER SUM PPED---------

THE FOLLOWING FIGURES ARE THE VALUES OF SHMS TRIGGER PULSE PEDESTALS

 FOR SHMS  HEAVY GAS CERENKOV SUM, NOBEL GAS CERENKOV SUM AND SHWER SUM

NOTE----> MEAN VALUE OF PULSE PEDESTALS OF HMS GOLDEN RUN = MG-----

NOTE----> MEAN FOR CURRENT RUN  = M  AND THEIR DIFFERNCE = MD------

--------ABSOLUTE VALUE OF MD should be < 10 Channels (2.5 mV)------

------------BUT HERE YOU SEE THE MG VALUE(S) > 10-------------------

-----------------PLEASE CONSULT WITH  EXPERTS----------------------

_____________________________________________________________________


!!!!!!!!!!!!!!!!!Attention Needed !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


chan 2 bar 3    pNGCER  MG  134.5001  M  116.7607 MD 17.7394    <span style="color: red>--> MD should be less than 10</span>

_____________________________________________________________________

:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=:=


-----------------------------------------------

3. Once you got 100 k CODA events (100000 CODA events) please do the following:

   ./run_shms_f2_stat.sh <run_num> <statistics goal for SHMS electrons **in K**>

   ./run_hms_f2_stat.sh <run_num> <statistics goal for HMS electrons **in K**>


This will tell you how many CODA events you need to take in SHMS and HMS in order to reach our statistics goal for electrons per kinematic setting. The statistics goal per kinematics (in K) is read from the tables you have in front of you (also posted at: ); please, please pay attention when you type.

As an example: ./run_shms_f2_stat.sh 3333 200 

(here the run number is 3333 and the statistics goal is 200000 electrons or 200 K electrons, the shells take as argument the number of electrons in K)

Continue with the current SHMS and HMS runs until you accumulated the number of CODA events you got by running the shells above. We would like to keep the runs under one hour so stop/start a run if you need more than 1 hour to reach the statistics goal for electrons.

-----------------------------------------------

4. Once you ended a run do the replay of the whole run so you can get the full electron statistics in that run by doing the following:

   ./run_shms_f2_stat_all.sh <run_num> <statistics goal for SHMS electrons **in K**>

   ./run_hms_f2_stat_all.sh <run_num> <statistics goal for HMS electrons **in K**>

This will tell you what percentage of the whole statistics you got in that particular run for that particular kinematic setting. Write that number of electrons (in units of K and in percentage) in the printed table you have right in front of you. 

We are done with this run!