Difference between revisions of "Yerevan Test Stand"

Latest revision as of 15:12, 17 July 2022

Test stand for the Yerevan group to check Aerogel detectors, etc.

wiki page author: R. Michaels, July 2022

The Yerevan test stand is located in the room adjacent to Walter's office above the machine shop in the EEL building.

@@ Line 1: / Line 1: @@
+Test stand for the Yerevan group to check Aerogel detectors, etc.
-== Yerevan's Test Stand ==
+wiki page author: R. Michaels, July 2022
+The Yerevan test stand is located in the room adjacent to Walter's office above the machine shop in the EEL building.
-Located in the room adjacent to Walter's office above the machine shop in the EEL building.
+== [[Running the Yerevan Test Stand DAQ]] ==
+== [[Analyzing the Yerevan Test Stand Data]] ==
-Has a single VME crate connected to a PC called hcdaq2.
-Login to hcdaq2 with the username "coda" and ask me for the password.
-<pre>
-To start the DAQ, on hcdaq2 type
-                 startcoda
-then login to the VME and start the ROC.  The "govme" logs into
-the VME and from there you type "startroc".
-[coda@hcdaq2 ~]$ govme
-[sbs-onl@amoll2 ~]$ startroc
-</pre>
-Hopefully the control GUI rcgui is familiar.  If not:
-<pre>
-After doing startcoda and the gui pops up in a few seconds ...
-Click Control (upper left)
-Click Connect
-Click the Tools icon (far left of GUI, at the top)
-Click Download (2nd button from left)
-Click Start to start a run (the >> button)
-Click End to end a run
-</pre>