Difference between revisions of "Yerevan Test Stand"
From HallCWiki
Jump to navigationJump to search| Line 1: | Line 1: | ||
| − | + | = Yerevan's Test Stand = | |
| − | = Running the DAQ = | + | == Running the DAQ == |
| − | = Analyzing the Data = | + | == Analyzing the Data == |
Located in the room adjacent to Walter's office above the machine shop in the EEL building. | Located in the room adjacent to Walter's office above the machine shop in the EEL building. | ||
Revision as of 15:05, 17 July 2022
Yerevan's Test Stand
Running the DAQ
Analyzing the Data
Located in the room adjacent to Walter's office above the machine shop in the EEL building.
Has a single VME crate connected to a PC called hcdaq2.
Login to hcdaq2 with the username "coda" and ask me for the password.
To start the DAQ, on hcdaq2 type
startcoda
then login to the VME and start the ROC. The command "govme" logs into
the VME crate and from there you type "startroc".
[coda@hcdaq2 ~]$ govme
[sbs-onl@amoll2 ~]$ startroc
Hopefully the control GUI rcgui is familiar. If not:
After doing startcoda and the gui pops up in a few seconds ... Click Control (upper left) Click Connect Click the Tools icon (far left of GUI, at the top) Click Download (2nd button from left) Click Start to start a run (the >> button) Click End to end a run
