Difference between revisions of "Taking LED Data"
From HallCWiki
Jump to navigationJump to search| Line 13: | Line 13: | ||
=Editing LED Parameters= | =Editing LED Parameters= | ||
* By default the DAC=45 , the pulse width=20ns , the pulse rate = 14.kHz | * By default the DAC=45 , the pulse width=20ns , the pulse rate = 14.kHz | ||
| − | * To change the DAC open " | + | * To change the DAC open "loop_test.sh" and change the 45 to the new desired DAC in line 23 "bash vld_square_pulse_sr.sh 10 45 $j" |
* To change the rate open "vld_calibration_test_args.sh" and line 41 "PULSER SETTING=" to the desired pulse rate | * To change the rate open "vld_calibration_test_args.sh" and line 41 "PULSER SETTING=" to the desired pulse rate | ||
Revision as of 18:57, 9 November 2023
Run Coin Daq VLD Configuration
- follow the daq instructions here:https://hallcweb.jlab.org/wiki/index.php/Hall_C_DAQ#If_the_CODA_vnc_session_disappeared_and_.27go_coin_daq.27_doesn.27t_work
- Start the daq in Coin mode following the instructions above
- In the Run Control GUI select the coda configuration "coin_vld"
- Start a run
Running LED scripts
- ssh to cdaq machine as hccoda user. Navigate to cd /home/hccoda/scripts/VLD/bryan
- Make sure to start the run BEFORE starting the LED scripts, and verify the event rate=0
- Execute the script ./loop_test.sh
- FAQ: if something crashes or an LED gets stuck on, then run ./vld_allOff.sh to cycle through and disable all channels.
Editing LED Parameters
- By default the DAC=45 , the pulse width=20ns , the pulse rate = 14.kHz
- To change the DAC open "loop_test.sh" and change the 45 to the new desired DAC in line 23 "bash vld_square_pulse_sr.sh 10 45 $j"
- To change the rate open "vld_calibration_test_args.sh" and line 41 "PULSER SETTING=" to the desired pulse rate
