Difference between revisions of "Minutes SHMS MC 1"

From HallCWiki
Jump to navigationJump to search
Line 1: Line 1:
 
= Minutes of SHMS MC working group meeting 06/08/2011 =
 
= Minutes of SHMS MC working group meeting 06/08/2011 =
  
−
Participants: Mark, Howard, Peter, Tanja, Dave and Dipangkar
+
Participants: Mark, Howard, Peter, John, Dave and Dipangkar
  
−
1. Validation of single arm MC for the SHMS:
+
1. Work on validating the apertures of the dipole is in progress, Mark was able to get the latest drawings
−
It was felt that the existing single arm MC models of the SHMS neesd to be revalidated because there are discrepancies in the
+
and things have changed some from earlier. Some confusion about the definition of effective length and optical entrance and exit was cleared up. The effective length is defined by the magnetic field turn on/off boundary. The dipole apertures are somewhat complicated by the transition pieces at the entrance and needs to be calculated with care. We should have this done in the next few days.
−
angle acceptance between various existing models. The validation will occur over the next two months with the goal of having
 
−
a stable validated model by the Aug. Hall-C meeting. The following steps will be taken:
 
  
−
Mark will compare Dave Gaskell's COSY model agianst the Snake model
+
2. Dave is updating the COSY model to take into account the new info from Mark.
−
Both models will be rationalized with the latest aperture numbers and other magnet parameters from Paul Brindza
 
−
Dave will summarize the results of his model in a few slides, to be circulated to the group.
 
−
Tanja will summarize the results of her earlier work in a few slides, to be circulated to the group.
 
−
A wiki link will be created on the Hall-C wiki to organize all the validation work
 
−
Once validated the code will be put in a CVS repository
 
−
All work should be stored in the existing SHMS group disk space so that it is accessible to all in the group.
 
−
 
 
−
2. Once a validated model is available design of collimators and sieve slits can proceed
 
−
 
 
−
3. The validated model will be used to compare the 2 sieve slit option against the GEM tracker + 1 sieve slit option
 
−
 
 
−
4. The cosy reconstruction matrix elements will be optimzed using Mark's simplified fitter (sans PAW interface)
 

Revision as of 09:20, 21 September 2011

Minutes of SHMS MC working group meeting 06/08/2011

Participants: Mark, Howard, Peter, John, Dave and Dipangkar

1. Work on validating the apertures of the dipole is in progress, Mark was able to get the latest drawings and things have changed some from earlier. Some confusion about the definition of effective length and optical entrance and exit was cleared up. The effective length is defined by the magnetic field turn on/off boundary. The dipole apertures are somewhat complicated by the transition pieces at the entrance and needs to be calculated with care. We should have this done in the next few days.

2. Dave is updating the COSY model to take into account the new info from Mark.

Retrieved from "https://hallcweb-2024.jlab.org/wiki/index.php?title=Minutes_SHMS_MC_1&oldid=447"