Difference between revisions of "Temp overview"

From HallCWiki
Jump to navigationJump to search
(Created page with "\special{papersize=8.5in,11in} \begin{center} {\LARGE{\underline{CT Experiment (E12-06-107) Run Plan Overview}}}\\ \large{\today} \end{center} \begin{table}[htbp] \flushlef...")
 
Line 1: Line 1:
\special{papersize=8.5in,11in}
+
<html><body><pre>papersize=8.5in,11in&lt;br/&gt;
 
+
&lt;center&gt;CT Experiment (E12-06-107) Run Plan Overview&lt;br/&gt;
\begin{center}
+
&lt;/center&gt;&lt;br/&gt;
{\LARGE{\underline{CT Experiment (E12-06-107) Run Plan Overview}}}\\
+
[htbp]
\large{\today}
+
  '&apos;'
\end{center}
+
Kinematics for the run.
 
 
 
 
\begin{table}[htbp]
 
\flushleft
 
\large { \mathbf {
 
\caption{Kinematics for the run.}
 
\begin{tabular}{ccccccl}
 
\hline
 
\hline
 
<math>Q^2</math> &<math>E_e</math> & <math>\theta_{e'}^{HMS}</math> & <math>p_{HMS}</math> & <math>\theta_{SHMS}</math> & <math>p_{SHMS}</math> & notes \\ \hline
 
GeV<math>^2</math> & GeV & deg & GeV/c & deg & GeV/c & \\
 
\hline
 
\hline
 
8.01 & 6.4 & 45.07 & 2.131 & 17.13 &5.122 & { overlap with E94139, first 3 pass kinematics, 1\
 
14.76 & 10.6 & 41.8 & 2.736 & 12.02 & 8.753 & { First 5 pass kinematics 2-2.5\
 
12.43 & 10.6 & 31.5 & 3.978 & 16.08 & 7.502 & { Second 5 pass kine, run with 2\
 
10.02 & 10.6 & 24.48 & 5.259 & 20.55 & 6.209 & { Third 5 pass kine, run with 1.4\
 
10.02 & 10.6 & 24.48 & 5.259 & 17.55 & 6.209 & { proton angle scan, ~2.5\
 
10.02 & 10.6 & 24.48 & 5.259 & 23.55 & 6.209 & { proton angle scan, ~2.5\
 
\hline
 
\hline
 
\end{tabular}
 
(1)
 
}}
 
\end{table}
 
 
 
 
 
All time estimates in the overview assume 50\
 
including configuration change time and a beam current of 65 <math>\mu</math>A. \<center><math>2ex]
 
 
 
\subsection*{Last shift before Experiment begins:}
 
 
 
 
 
\item{All spectrometer magnets on to correct polarity and cycled to initial
 
values.  Spectrometers also at initial angles.}
 
 
 
\item{Check that no new obstructions have appeared since the spectrometer
 
angles were certified.  For example, ladders, RadCon survey ropes, etc.}
 
 
 
 
 
\item{Double-check HMS/SHMS Gas Cerenkov pressure is at correct value.}
 
 
 
\item{Verify there are no obstructions between the detectors (ie, no WC covers,
 
no dangling cables, etc.) on both spectrometers.}
 
 
 
\item{Verify there are no unusual obstructions between the scattering chamber
 
and the spectrometer front windows.  Make sure any protective windows on the
 
scattering chamber have been removed.}
 
 
 
\item{Lock up the hall.}
 
 
 
\item{Clean up the counting house. Make sure all terminals, consoles, and printers
 
    are alive and well.}
 
 
 
\item{Take a cosmic run and look for problems.}
 
 
 
 
 
  
 +
{| border='1' cellspacing='0'
 +
| &lt;math&gt;Q^2&lt;/math&gt;
 +
|&lt;math&gt;E_e&lt;/math&gt;
 +
| &lt;math&gt;\theta_{e'}^{HMS}&lt;/math&gt;
 +
| &lt;math&gt;p_{HMS}&lt;/math&gt;
 +
| &lt;math&gt;\theta_{SHMS}&lt;/math&gt;
 +
| &lt;math&gt;p_{SHMS}&lt;/math&gt;
 +
| notes
 +
|-
 +
| GeV&lt;math&gt;^2&lt;/math&gt;
 +
| GeV
 +
| deg
 +
| GeV/c
 +
| deg
 +
| GeV/c
 +
|
 +
|-
 +
| 8.01
 +
| 6.4
 +
| 45.07
 +
| 2.131
 +
| 17.13
 +
|5.122
 +
| overlap with E94139, first 3 pass kinematics, 1% stat
 +
|-
 +
| 14.76
 +
| 10.6
 +
| 41.8
 +
| 2.736
 +
| 12.02
 +
| 8.753
 +
| First 5 pass kinematics 2-2.5% stat
 +
|-
 +
| 12.43
 +
| 10.6
 +
| 31.5
 +
| 3.978
 +
| 16.08
 +
| 7.502
 +
| Second 5 pass kine, run with 2% stat
 +
|-
 +
| 10.02
 +
| 10.6
 +
| 24.48
 +
| 5.259
 +
| 20.55
 +
| 6.209
 +
| Third 5 pass kine, run with 1.4% stat
 +
|-
 +
| 10.02
 +
| 10.6
 +
| 24.48
 +
| 5.259
 +
| 17.55
 +
| 6.209
 +
| proton angle scan, &amp;nbsp;2.5% stat (time permitting)
 +
|-
 +
| 10.02
 +
| 10.6
 +
| 24.48
 +
| 5.259
 +
| 23.55
 +
| 6.209
 +
| proton angle scan, &amp;nbsp;2.5% stat (time permitting)
 +
|}
 +
tab:kinematics_jul
 +
'&apos;'
 +
&lt;br/&gt;
 +
All time estimates in the overview assume 50% Hall C + Accelerator efficiency,
 +
including configuration change time and a beam current of 65 &lt;math&gt;\mu&lt;/math&gt;A. \&lt;center&gt;&lt;math&gt;2ex]&lt;br/&gt;
 +
\subsection*{Last shift before Experiment begins:}&lt;br/&gt;&lt;br/&gt;
 +
#{All spectrometer magnets on to correct polarity and cycled to initial
 +
values. Spectrometers also at initial angles.}&lt;br/&gt;
 +
#{Check that no new obstructions have appeared since the spectrometer
 +
angles were certified. For example, ladders, RadCon survey ropes, etc.}&lt;br/&gt;
 +
#{Double-check HMS/SHMS Gas Cerenkov pressure is at correct value.}&lt;br/&gt;
 +
#{Verify there are no obstructions between the detectors (ie, no WC covers,
 +
no dangling cables, etc.) on both spectrometers.}&lt;br/&gt;
 +
#{Verify there are no unusual obstructions between the scattering chamber
 +
and the spectrometer front windows. Make sure any protective windows on the
 +
scattering chamber have been removed.}&lt;br/&gt;
 +
#{Lock up the hall.}&lt;br/&gt;
 +
#{Clean up the counting house. Make sure all terminals, consoles, and printers are alive and well.}&lt;br/&gt;
 +
#{Take a cosmic run and look for problems.}&lt;br/&gt;
  
 +
&lt;br/&gt;
 
\pagebreak
 
\pagebreak
 
\noindent
 
\noindent
{\color{blue}{ \large \mathbf{6.4 GeV data taking: 60 beam hours scheduled, need 8 hrs for calibration and 52 hrs (at 50\
+
{\color{blue}{ \large '&apos;'{6.4 GeV data taking: 60 beam hours scheduled, need 8 hrs for calibration and 52 hrs (at 50% eff.) for production.}'&apos;'}}&lt;br/&gt;&lt;br/&gt;
 
 
 
 
 
 
 
 
 
{\BrickRed{
 
{\BrickRed{
\item{Calibrations <math>\Rightarrow</math> 8 hours}
+
#{Calibrations &lt;/math&gt;&lt;math&gt; 8 hours}
  \item{Verify magnets properly cycled - Beam energy measurement - Harp scan} \item{Detector checkout with 3/4 trigger, and long run for detector ca
+
#*{Verify magnets properly cycled - Beam energy measurement - Harp scan}
libration}      \item{BCM Calibration (unless one was completed very close to the start of experiment)} \item{<math>ep</math> elastic coincidences, (Heepcheck) <math>Q^2</math>=4.0 GeV<math>^2</math>, HMS at 4.263 GeV/c, 22.10 deg, SHMS at 2.928     GeV/c, 33.21 deg ,expected rate ~ few Hz \@ 65 <math>\mu</math>A current. (at least 3 hrs).} \item{verify timing of all triggers}
+
#*{Detector checkout with 3/4 trigger, and long run for detector calibration}
}}
+
#*{BCM Calibration (unless one was completed very close to the start of experiment)}
 
+
#*{&lt;/math&gt;ep&lt;math&gt; elastic coincidences, (Heepcheck) &lt;/math&gt;Q^2&lt;math&gt;=4.0 GeV&lt;/math&gt;^2&lt;math&gt;, HMS at 4.263 GeV/c, 22.10 deg, SHMS at 2.928 GeV/c, 33.21 deg ,expected rate ~ few Hz \@ 65 &lt;/math&gt;&lt;math&gt;A current. (at least 3 hrs).}
\vspace{5ex}
+
#*{verify timing of all triggers}}}&lt;br/&gt;
 
+
#{&lt;/math&gt;Q^2=8.0&lt;math&gt; &lt;/math&gt;(GeV/c)^2&lt;math&gt; production, goal: 10000 cnts}
\item{<math>Q^2=8.0</math> <math>\rm (GeV/c)^2</math> production, goal: 10000 cnts}
+
#*{LH + MT 12 hrs + 4 hrs}
  \item{LH + MT 12 hrs + 4 hrs} \item{C 36 hrs}
+
#*{C 36 hrs}&lt;br/&gt;
 
 
  
 
\noindent
 
\noindent
{\color{blue}{ \large \mathbf{10.6 GeV data taking: 300 beam hours scheduled, need 8 hrs for calibration and 292 hrs (at 50\
+
{\color{blue}{ \large '&apos;'{10.6 GeV data taking: 300 beam hours scheduled, need 8 hrs for calibration and 292 hrs (at 50% eff.) for production.}'&apos;'}}&lt;br/&gt;{\BrickRed{
 
+
#{Calibrations &lt;/math&gt;&lt;math&gt; 8 hours}
 
+
#*{Verify magnets properly cycled - Beam energy measurement - Harp scan}
 
+
#*{Detector checkout with 3/4 trigger, and long run for detector calibration}  
{\BrickRed{
+
#*{BCM calibration}
\item{Calibrations <math>\Rightarrow</math> 8 hours}
+
#*{&lt;/math&gt;ep&lt;math&gt; elastic coincidences (Heepcheck), &lt;/math&gt;Q^2&lt;math&gt;=9.5 GeV&lt;/math&gt;^2&lt;math&gt;, HMS at 5.5394 GeV/c, 23.20 deg, SHMS at 5.9250 GeV/c, 21.61 deg ,expected rate ~ few Hz \@ 65 &lt;/math&gt;&lt;math&gt;A current. (at least 4 hrs) }}}&lt;br/&gt;
  \item{Verify magnets properly cycled - Beam energy measurement - Harp scan} \item{Detector checkout with 3/4 trigger, and long run for detector calibration}     \item{BCM calibration}   \item{<math>ep</math> elastic coincidences (Heepcheck), <math>Q^2</math>=9.5 GeV<math>^2</math>, HMS at 5.5394 GeV/c, 23.20 deg, SHMS at 5.9250     GeV/c, 21.61 deg ,expected rate ~ few Hz \@ 65 <math>\mu</math>A current. (at least 4 hrs) }
+
{\PineGreen{&lt;br/&gt;
}}
+
#{&lt;/math&gt;Q^2=14.76&lt;math&gt; &lt;/math&gt;(GeV/c)^2&lt;math&gt; production, goal: 2000 cnts}
 
+
#*{LH + MT 51 hrs + 17 hrs}
{\PineGreen{
+
#*{C 122 hrs}
 
+
#{configuration change 5 hrs}
\item{<math>Q^2=14.76</math> <math>\rm (GeV/c)^2</math> production, goal: 2000 cnts}
+
#{&lt;/math&gt;Q^2=12.43&lt;math&gt; &lt;/math&gt;(GeV/c)^2&lt;math&gt; production, goal: 2500 cnts}
  \item{LH + MT 51 hrs + 17 hrs} \item{C 122 hrs}
+
#*{LH + MT 12 hrs + 4 hrs}
\item{configuration change 5 hrs}
+
#*{C 24 hrs}
\item{<math>Q^2=12.43</math> <math>\rm (GeV/c)^2</math> production, goal: 2500 cnts}
+
#{configuration change 5 hrs}
  \item{LH + MT 12 hrs + 4 hrs} \item{C 24 hrs}
+
#{&lt;/math&gt;Q^2=10.02&lt;math&gt; &lt;/math&gt;(GeV/c)^2&lt;math&gt; production, goal: 4500 cnts}
\item{configuration change 5 hrs}
+
#*{LH + MT 6 hrs + 2 hrs}
\item{<math>Q^2=10.02</math> <math>\rm (GeV/c)^2</math> production, goal: 4500 cnts}
+
#*{C 12.0 hrs}
  \item{LH + MT 6 hrs + 2 hrs} \item{C 12.0 hrs}
+
#{&lt;/math&gt;Q^2=10.02&lt;math&gt; &lt;/math&gt;(GeV/c)^2&lt;math&gt; proton angle scan, goal: 2500 cnts }
\item{<math>Q^2=10.02</math> <math>\rm (GeV/c)^2</math> proton angle scan, goal: 2500 cnts }
+
#*{C 12.0 hrs, proton angle scan 1, 2500 cnts}
  \item{C 12.0 hrs, proton angle scan 1, 2500 cnts} \item{C 20.0 hrs, proton angle scan 2, 2500 cnts}
+
#*{C 20.0 hrs, proton angle scan 2, 2500 cnts}&lt;br/&gt;
 +
}}&lt;br/&gt;
  
}}
+
\end{document}&lt;/math&gt;</pre></body></html>

Revision as of 15:20, 15 January 2018

<html><body>

papersize=8.5in,11in<br/>
<center>CT Experiment (E12-06-107) Run Plan Overview<br/>
</center><br/>
[htbp]
 '''
Kinematics for the run.

{| border='1' cellspacing='0'
| <math>Q^2</math> 
|<math>E_e</math> 
| <math>\theta_{e'}^{HMS}</math> 
| <math>p_{HMS}</math> 
| <math>\theta_{SHMS}</math> 
| <math>p_{SHMS}</math> 
| notes 
|-
| GeV<math>^2</math> 
| GeV 
| deg 
| GeV/c 
| deg 
| GeV/c 
| 
|-
| 8.01 
| 6.4 
| 45.07 
| 2.131 
| 17.13 
|5.122 
| overlap with E94139, first 3 pass kinematics, 1% stat 
|-
| 14.76 
| 10.6 
| 41.8 
| 2.736 
| 12.02 
| 8.753 
| First 5 pass kinematics 2-2.5% stat 
|-
| 12.43 
| 10.6 
| 31.5 
| 3.978 
| 16.08 
| 7.502 
| Second 5 pass kine, run with 2% stat 
|-
| 10.02 
| 10.6 
| 24.48 
| 5.259 
| 20.55 
| 6.209 
| Third 5 pass kine, run with 1.4% stat
|-
| 10.02 
| 10.6 
| 24.48 
| 5.259 
| 17.55 
| 6.209 
| proton angle scan, &nbsp;2.5% stat (time permitting)
|-
| 10.02 
| 10.6 
| 24.48 
| 5.259 
| 23.55 
| 6.209 
| proton angle scan, &nbsp;2.5% stat (time permitting)
|}
tab:kinematics_jul
'''
<br/>
All time estimates in the overview assume 50% Hall C + Accelerator efficiency,
including configuration change time and a beam current of 65 <math>\mu</math>A. \<center><math>2ex]<br/>
\subsection*{Last shift before Experiment begins:}<br/><br/>
#{All spectrometer magnets on to correct polarity and cycled to initial
values. Spectrometers also at initial angles.}<br/>
#{Check that no new obstructions have appeared since the spectrometer
angles were certified. For example, ladders, RadCon survey ropes, etc.}<br/>
#{Double-check HMS/SHMS Gas Cerenkov pressure is at correct value.}<br/>
#{Verify there are no obstructions between the detectors (ie, no WC covers,
no dangling cables, etc.) on both spectrometers.}<br/>
#{Verify there are no unusual obstructions between the scattering chamber
and the spectrometer front windows. Make sure any protective windows on the
scattering chamber have been removed.}<br/>
#{Lock up the hall.}<br/>
#{Clean up the counting house. Make sure all terminals, consoles, and printers are alive and well.}<br/>
#{Take a cosmic run and look for problems.}<br/>

<br/>
\pagebreak
\noindent
{\color{blue}{ \large '''{6.4 GeV data taking: 60 beam hours scheduled, need 8 hrs for calibration and 52 hrs (at 50% eff.) for production.}'''}}<br/><br/>
{\BrickRed{
#{Calibrations </math><math> 8 hours}
#*{Verify magnets properly cycled - Beam energy measurement - Harp scan}
#*{Detector checkout with 3/4 trigger, and long run for detector calibration} 
#*{BCM Calibration (unless one was completed very close to the start of experiment)}
#*{</math>ep<math> elastic coincidences, (Heepcheck) </math>Q^2<math>=4.0 GeV</math>^2<math>, HMS at 4.263 GeV/c, 22.10 deg, SHMS at 2.928 GeV/c, 33.21 deg ,expected rate ~ few Hz \@ 65 </math><math>A current. (at least 3 hrs).}
#*{verify timing of all triggers}}}<br/>
#{</math>Q^2=8.0<math> </math>(GeV/c)^2<math> production, goal: 10000 cnts}
#*{LH + MT 12 hrs + 4 hrs}
#*{C 36 hrs}<br/>

\noindent
{\color{blue}{ \large '''{10.6 GeV data taking: 300 beam hours scheduled, need 8 hrs for calibration and 292 hrs (at 50% eff.) for production.}'''}}<br/>{\BrickRed{
#{Calibrations </math><math> 8 hours}
#*{Verify magnets properly cycled - Beam energy measurement - Harp scan}
#*{Detector checkout with 3/4 trigger, and long run for detector calibration} 
#*{BCM calibration}
#*{</math>ep<math> elastic coincidences (Heepcheck), </math>Q^2<math>=9.5 GeV</math>^2<math>, HMS at 5.5394 GeV/c, 23.20 deg, SHMS at 5.9250 GeV/c, 21.61 deg ,expected rate ~ few Hz \@ 65 </math><math>A current. (at least 4 hrs) }}}<br/>
{\PineGreen{<br/>
#{</math>Q^2=14.76<math> </math>(GeV/c)^2<math> production, goal: 2000 cnts}
#*{LH + MT 51 hrs + 17 hrs}
#*{C 122 hrs}
#{configuration change 5 hrs}
#{</math>Q^2=12.43<math> </math>(GeV/c)^2<math> production, goal: 2500 cnts}
#*{LH + MT 12 hrs + 4 hrs}
#*{C 24 hrs}
#{configuration change 5 hrs}
#{</math>Q^2=10.02<math> </math>(GeV/c)^2<math> production, goal: 4500 cnts}
#*{LH + MT 6 hrs + 2 hrs}
#*{C 12.0 hrs}
#{</math>Q^2=10.02<math> </math>(GeV/c)^2<math> proton angle scan, goal: 2500 cnts }
#*{C 12.0 hrs, proton angle scan 1, 2500 cnts}
#*{C 20.0 hrs, proton angle scan 2, 2500 cnts}<br/>
}}<br/>

\end{document}</math>

</body></html>