Difference between revisions of "Charge Feedback Parity DAQ"
From HallCWiki
Jump to navigationJump to search| Line 24: | Line 24: | ||
=== How to run the flipper script (from the Hall A VNC session) === | === How to run the flipper script (from the Hall A VNC session) === | ||
*This script need to be run when the IHWP state changes and Hall A is not controlling our feedback. | *This script need to be run when the IHWP state changes and Hall A is not controlling our feedback. | ||
| − | *stop the run (parity daq) | + | *'''stop the run''' (parity daq) |
*in the vnc session from above | *in the vnc session from above | ||
* <code> ssh apar@adaq2</code> | * <code> ssh apar@adaq2</code> | ||
| Line 30: | Line 30: | ||
* <code> ./FlipPCvaluesHallC</code> You should see the hallc_IACell_setting variable change on the wall | * <code> ./FlipPCvaluesHallC</code> You should see the hallc_IACell_setting variable change on the wall | ||
* <code> ./checkPCvaules</code> | * <code> ./checkPCvaules</code> | ||
| − | *start a run (parity daq) | + | *'''start a run''' (parity daq) |
| + | * Make an HCLOG entry | ||
== Contacts == | == Contacts == | ||
Revision as of 00:13, 19 September 2020
The Charge Asymmetry Feedback system is controlled by the Hall A Parity DAQ.
When Hall A is in production mode, the Hall A shift crew will manage the Parity DAQ and control feedback for both Hall A and Hall C beams.
If the Hall A Counting House is not staffed, then Hall C must negotiate with the Parity group to ensure that the Parity DAQ is still running.
- This must be running for all 3He production data! (And should be running in general.)
- The state of this system is monitored in the Hall C alarm handler, and can be overseen by the Hall C Shift crew using the stripchart on the left large wall display (see below).
Instructions
- Parity DAQ Running - with Hall C Feedback passively running (Aug 02, 2020 HClog entry)
- Bring up this vnc session using
go_parity_feedbackunder the cdaq account.
- Hall C running parity DAQ for charge feedback (Feb 12, 2020 HCLog entry) -- OLD, just for reference.
Useful Commands (on cdaq machines)
go_parityInjector parity settings (IHWP status, Hall Laser IA settings, etc)go_parity_feedbackBring up the Parity DAQ charge feedback VNC session (if Hall C is running alone; see below)go_Qasym_stripchartBring up the Hall C Charge Asym monitoring stripcharts (these should always be up on the big wall screens)
How to run the flipper script (from the Hall A VNC session)
- This script need to be run when the IHWP state changes and Hall A is not controlling our feedback.
- stop the run (parity daq)
- in the vnc session from above
ssh apar@adaq2cd ~/feedback2019./FlipPCvaluesHallCYou should see the hallc_IACell_setting variable change on the wall./checkPCvaules- start a run (parity daq)
- Make an HCLOG entry
Contacts
- Bill Henry (Hall C)
- Cameron Clarke (Hall A)
- Caryn Palatchi (Hall A)
