Difference between revisions of "Hall C Cameras"
From HallCWiki
(→Firmware File Archive) |
|||
Line 29: | Line 29: | ||
== Firmware File Archive == | == Firmware File Archive == | ||
− | Panasonic Firmware files can be found | + | Panasonic Firmware files can be found here: <code>/net/cdaqfs1/opt/RPMS/Panasonic_WV-SC385-firmware/</code> |
Revision as of 15:14, 28 August 2021
Contents
Hall C Cameras
- The Hall C Cameras can be brought up on any hcdesk machine using
% go_cameras
You can also open a browser and go to
Note that that link only works if you are on the Hall C network.
Rebooting Hall Cameras
The three 'Hall' Cameras (hccam01, 02, 03) are on a switchable power supply. They can be rebooted from this switch. You need to be on a Hall C computer to access this link.
https://hcreboot4.jlab.org (User: hccuser)
- From the top tabs: Control >> RPDU >> Outlets
- Then select "Reboot Immediate", the camera to be rebooted, and on the next page "Apply".
Make an HCLog if you reboot a camera this way.
"Firmware Install Required" Problem
Sometimes the camera firmware is damaged enough that it will request that the firmware be reinstalled after a power-cycle.
- Download this File:Sc385 213E.img.gz, open a terminal and decompress it with
% gunzip Sc385_213E.img.gz
- Follow the Firmware Update instructions the camera presents on its web page. (Select the Sc385_213E.img file to upload.)
Make an HCLog if you have to do this.
NOTE: The camera firmware defaults to a 'H.264' live stream format that the web browser can't handle. Click on the 'JPEG' button on the left sidebar to get the live image back until the default can be reset by an expert.
Firmware File Archive
Panasonic Firmware files can be found here: /net/cdaqfs1/opt/RPMS/Panasonic_WV-SC385-firmware/