Difference between revisions of "BPM calibration information"
From HallCWiki
Jump to navigationJump to search| Line 12: | Line 12: | ||
! 6/23/2019 !! Calibration !! 0.11 !! 0.17 !! -1.07 !! -0.40 !! -0.18 !! -0.40 !! -0.97 !! -1.11 !! -0.95 !! 0.95 !! 1.15 !! 0.85 !! - | ! 6/23/2019 !! Calibration !! 0.11 !! 0.17 !! -1.07 !! -0.40 !! -0.18 !! -0.40 !! -0.97 !! -1.11 !! -0.95 !! 0.95 !! 1.15 !! 0.85 !! - | ||
|- | |- | ||
| − | ! 12/8/2019 !! Calibration !! 0.14 !! 0.22 !! -1.13 !! -0.06 !! -0.29 !! -0.78 !! -0.96 !! -1.09 !! -0.96 !! 0.95 !! 1.16 !! 0.85 !! Polarized 3He | + | ! 12/8/2019 !! Calibration !! 0.14 !! 0.22 !! -1.13 !! -0.06 !! -0.29 !! -0.78 !! -0.96 !! -1.09 !! -0.96 !! 0.95 !! 1.16 !! 0.85 !! Polarized 3He running |
|- | |- | ||
|} | |} | ||
Revision as of 14:27, 5 May 2023
- The beam position monitors (BPMs) on the diagnostic girder in Hall C (IPM3H07A, IPM3H07B, and IPM3H07C) are calibrated by comparison with the Hall C superharps (IHA3H07A and IHA3H07B). Ideally, a "bulls-eye" scan is doe which allows one to determine the BPMS offsets and slopes. However, a single harp scan is sufficient to check the BPM offsets.
| Date | Method | AXoff | BXoff | CXoff | AYoff | BYoff | CYoff | AXslope | BXslope | CXslope | AYslope | BYslope | CYslope | Notes |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1/13/2018 | Calibration | -0.06 | 0.07 | -1.06 | -0.46 | 0.12 | 0.61 | -0.98 | -1.12 | -0.96 | 0.97 | 1.17 | 0.87 | 1st calibration |
| 8/29/2018 | Harp scan | 0.15 | 0.29 | -1.08 | -0.12 | 0.63 | 1.09 | - | - | - | - | - | - | - |
| 2/9/2019 | Harp scan | 0.25 | 0.46 | -1.01 | -0.08 | -0.04 | -0.11 | - | - | - | - | - | - | Radiator installed during January 2019 SAD |
| 6/23/2019 | Calibration | 0.11 | 0.17 | -1.07 | -0.40 | -0.18 | -0.40 | -0.97 | -1.11 | -0.95 | 0.95 | 1.15 | 0.85 | - |
| 12/8/2019 | Calibration | 0.14 | 0.22 | -1.13 | -0.06 | -0.29 | -0.78 | -0.96 | -1.09 | -0.96 | 0.95 | 1.16 | 0.85 | Polarized 3He running |
