Difference between revisions of "Set up LAD test stand at the ESB"
From HallCWiki
(→Set up the ROC) |
|||
Line 6: | Line 6: | ||
* One SD (from Alex) | * One SD (from Alex) | ||
* One TI (from Bob) | * One TI (from Bob) | ||
+ | |||
+ | = Run CODA = | ||
+ | # ssh -Y coda@hcdaq5 (Hall C coda pwd) | ||
+ | # vncviewer :4 (Hall C coda pwd) | ||
+ | # startCoda | ||
+ | # kcoda | ||
= set up CODA = | = set up CODA = |
Latest revision as of 10:47, 20 August 2024
Hardware list
- One VXS crate (belong to SOLID)
- One NIM crate (from GEN)
- ROC: genrp-roc01
- One FADC (from NPS)
- One SD (from Alex)
- One TI (from Bob)
Run CODA
- ssh -Y coda@hcdaq5 (Hall C coda pwd)
- vncviewer :4 (Hall C coda pwd)
- startCoda
- kcoda
set up CODA
- The network is under "Hall A development"
- Use computer named "hcdaq5"
- At coda@hcdaq5, copy coda 3.10_devel from adaqfs:(Turns out using this CODA cause an issue on PEB, PEB can't be configured. There are some inconsistencies in the jar files)
rsync -avz adaq@adaq1:/adaqfs/home/sbs-onl/coda/3.10_devel_patched /home/coda/coda
and create a soft link:
ln -s /home/coda/coda/3.10_devel_patched /home/coda/coda/3.10_devel
So, "genrp-roc01" and "coda@hcdaq5" are using the same coda package.
- Create a shell script to set up the CODA ENV variables for LAD test stand: /home/coda/setupLAD.sh
- Use /site/coda/3.10_devel instead in both "hcdaq5" and "genrp-roc01"
Set up the ROC
- Log into the roc: ssh sbs-onl@genrp-roc01
- Create a directory for LAD: ESB_LAD_TD/
- Use the Hall C hcvme02 rol as starting point
- $LINUXVME is pointed to ESB_LAD_TD/linuxvme