Difference between revisions of "SIDIS"

Revision as of 14:30, 11 July 2018

	Description of task	Who?
1	beam energy vs. time
2	spectrometer settings (momentum, angle): check all angles on tv snapshots and make sure standard kinematics doc is correct
3	beam current calibration		-	3b	BCM stability vs time
4	optics for SHMS dc<-10 and dp >20
5	detector calibrations	Anashe
5a	...
5b	...
6	detector efficiencies for standard cuts
6a	...
6b	...
7	check of optics using ep(e', pi+) n and exclusive kaon production (peak positions and widths)
8	study best cuts for pi/K separation vs. momentum
9	study best cuts for pi/p separation
10	check stability in coincidence time peak (not stable in Peter's analysis)
11	Decide on binning in x, Q2, z, pt, phi
12	check stability of HMS singles rates	Anashe
13	Careful evaluation of random subtraction method
14	Check of Al subtraction for LH2, LD2
15	Check stability (smoothness) of SHMS results, especially ratios
16	Fix as many "problem" runs as possible (usually by ending replay before end of run)
17	run MC for each setting: take ratio of MC/data to get corrections to SIDIS model	Anashe & Hem?
18	Check accuracy of exclusive models with new data from both Hall C and CLAS
19	Pair-symmetric correction (plot to show is very small)
20	Analyze results in terms of the parameters in the proposal
21	How well can we separate out the cosphi and cos2phi terms?
22	Write PRL or PL on pion d, h results
23	Write PRD with also inclusion of kaon results, aluminum, and beam single-spin asymmetries

@@ Line 35: / Line 35: @@
 | 2 || spectrometer settings (momentum, angle): check all angles on tv snapshots and make sure standard kinematics doc is correct ||  ||
 |-
 | 3 || beam current calibration ||  ||
+| -
+| 3b || BCM stability vs time || ||
 |-
 | 4 || optics for SHMS dc<-10 and dp >20 ||  ||