Elong-14-03-21

From HallCWiki
Jump to navigationJump to search

LiD

I added LiD into my b1 rates calculations, since from the workshop it sounded like it might be a viable alternative for achieving higher polarization than ND3. Below are the results of ND3, LiD, and LiD-as-He2D (since lithium could be thought of as a tightly bound 4He & deuteron) in the calculations. Each calculation assumes identical target geometry (beads & packing fraction), Pzz, and detector acceptance with the only difference being the material itself.

ND3
2014-03-21-ND3-b1.png
LiD
2014-03-21-LiD-b1.png
He2D
2014-03-21-He2D-b1.png

Although I expected the physics rate to double between LiD and He2D (since we doubled the number of accepted deuterons), the difference in the total rate seems weird.

Cross Section Checks

To look into the matter, I started looking at the cross sections and the luminosity*cross sections to see how different Li was from HeD

2014-03-21-cs-check.png

By Spectrometer

Since it's a little difficult to tell exactly where Li and HeD we overlapping for which spectrometer, I broke it down into each:

SHMS low x SHMS mid x SHMS high x HMS
2014-03-21-cs-check-shms1.png 2014-03-21-cs-check-shms2.png 2014-03-21-cs-check-shms3.png 2014-03-21-cs-check-hms.png

For each piece (with the possible exception of the SHMS mid x point), the Li dominates slightly over the HeD, which would cause the LiD rates to come out slightly higher than the HeD rates, but it's nearly negligible.