Difference between revisions of "DAQ/Trigger Run Check Lists"

From HallCWiki
Jump to: navigation, search
(Trigger Leg Definitions)
(General Checks)
Line 14: Line 14:
 
= General Checks =
 
= General Checks =
  
* Check SHMS & HMS hodoscope discriminator thresholds
+
* Check SHMS & HMS hodoscope discriminator thresholds and widths
 +
** Nominally these are 40 ns and -30 mV
 
* Check SHMS & HMS PID trigger thresholds
 
* Check SHMS & HMS PID trigger thresholds
 
* Check SHMS & HMS PID trigger DC offsets on scope
 
* Check SHMS & HMS PID trigger DC offsets on scope

Revision as of 10:52, 9 January 2018

Overview

  • Here we discuss the necessary tasks which need to be completed at the beginning of a run period in order to ensure reliable operation of the single arm DAQ's as well as the coincidence DAQ.

Trigger Leg Definitions

STOF      :  2/2 {1/2 {S1X, S1Y}, 1/2 {S2X, S2Y}}
EL_LO     :  2/3 {STOF, 3/4, PR-LO} 
EL_CER    :  2/2 {EL-LO, CER}
EL_HI     :  3/3 {3/4, PSh-HI, Sh_LO}
EL_REAL   :  1/2 {EL_CER, EL_HI}
EL_CLEAN  :  2/2 {EL_CER, EL_HI}

General Checks

  • Check SHMS & HMS hodoscope discriminator thresholds and widths
    • Nominally these are 40 ns and -30 mV
  • Check SHMS & HMS PID trigger thresholds
  • Check SHMS & HMS PID trigger DC offsets on scope

Single Arm DAQ Checks

  • Verify coincidence timing for composite triggers
    • Scope traces of all legs of the trigger
  • Check relative arrival time of 3/4, EL-REAL, and EL-CLEAN triggers at TM
    • Primary trigger should come first, subsequent triggers should arrive 10-20 ns later
  • Watch for and correct any trigger related offsets due to different reference time shifts from different triggers
    • Software offsets to be determined and implemented
  • Verify desired trigger takes the TDC timing
    • Ensure the intended reference time is being selected by the analyzer (sanity check self timing peaks)
  • Verify readout windows are capturing all the data via. raw histograms
    • Use “production_all” replays to do this
    • Primary checks: trigger apparatus, hodoscopes, chambers
  • Sanity check dead-times utilizing various forms of measurements

Coincidence DAQ Checks

  • Verify SHMS & HMS coincidence trigger timing
  • Check relative arrival times of trigs at TM
    • Ensure T6 is first, other triggers should arrive 10-20 ns later
  • Watch for and correct any trigger related offsets due to different reference time shifts from different triggers
    • Software offsets to be determined and implemented
  • Verify desired trigger takes the TDC timing
    • Ensure the intended reference time is being selected by the analyzer (sanity check self timing peaks)
  • Verify readout windows are capturing all the data via. raw histograms
    • Use “production_all” replays to do this
    • Primary checks: trigger apparatus, hodoscopes, chambers