Hall C Cameras

From HallCWiki
Revision as of 14:14, 28 August 2021 by Brads (Talk | contribs) (Firmware File Archive)

Jump to: navigation, search

Hall C Cameras

  • The Hall C Cameras can be brought up on any hcdesk machine using
 % go_cameras

You can also open a browser and go to

 Note that that link only works if you are on the Hall C network.

Rebooting Hall Cameras

The three 'Hall' Cameras (hccam01, 02, 03) are on a switchable power supply. They can be rebooted from this switch. You need to be on a Hall C computer to access this link.

https://hcreboot4.jlab.org  (User: hccuser)
  • From the top tabs: Control >> RPDU >> Outlets
  • Then select "Reboot Immediate", the camera to be rebooted, and on the next page "Apply".

Make an HCLog if you reboot a camera this way.

"Firmware Install Required" Problem

Sometimes the camera firmware is damaged enough that it will request that the firmware be reinstalled after a power-cycle.

 % gunzip Sc385_213E.img.gz
  • Follow the Firmware Update instructions the camera presents on its web page. (Select the Sc385_213E.img file to upload.)

Make an HCLog if you have to do this.

NOTE: The camera firmware defaults to a 'H.264' live stream format that the web browser can't handle. Click on the 'JPEG' button on the left sidebar to get the live image back until the default can be reset by an expert.

Firmware File Archive

Panasonic Firmware files can be found here: