Hall C Weekly Meeting - October 21, 2013
From HallCWiki
Jump to navigationJump to search- Andy Kenyon
- Testing SHMS cryo distribution line
- Leak checking the big joints and stinger lines on the Anaconda
- Salvaging water connectors from old Moller quads to be used on the new coils
- Located SHMS parts: Magnet mounts in testlab, liquid cooled leads in test lab
- Joe Beaufait
- 8 contractors received walkthrough training
- Got light bulbs for the HMS hut
- The HV cables (G0 cable move) are on the wall
- Brad Sawatzky
- There is a new counting house switch in the cable shaft room
- There is limited networking in the counting house. Our computers will be moved back to the CH by the end of the year.
- Paul Brindza
- SHMS Construction Contracts
- Deck and Platform RFQ was reviewed by JLAB Plant Services. Conclusion is we added a short paragraph instructing the contractor to read the weld notes drawing and we will add a sign to the complete deck posting the live load limit.
- SHMS Magnets
- Dipole
- Dipole prototype coil second layer spacers arrived last week Winding to restart tomorrow or Wednesday
- Epoxy cure cycle fixed, using a more elaborate cycle 110 deg C for 2 hours and 125 Deg C for 16 hours
- New compression test samples are being made
- Testing at UBS lab on Thursday to validate epoxy cure
- Further testing will be done in November to validate compressive strength and modulus of coil
- Production conductor consolidator in operation
- Production consolidating to start this week on an F reel
- Production winding to begin nominally ~ Nov 15- Nov 20
- Q23
- Final Design Review summary sent form JLAB to SigmaPhi with revised punch list. Accepted by SigmaPhi. 50 % FDR value invoice expected.
- HB
- One coil is in the cryostat. Estimate another 1-2 weeks to complete.
- Q1
- Eval of coil end clamp to determine mod or make new decision
- Fringe fields
- HB mag analysis by MSU under review for apparent conflict with coil yoke relative position. MSU model has coils flush with yoke, JLAB has coils set in 2 cm.
- Dipole
