Information for Shift Takers
Counting house: 6000(*), 5503, 6666 | Run coordinator: 757-270-8916 | MCC: 7047(*), 7046, 7048 | Crew chief: 7045 | Guard house: 8522
Before the start of your shift: read and understand the Safety Documentation for this experiment.
- You must then sign in the Yellow Binder in the Hall C Counting House!
Detailed instructions for Shift Takers are available on the How-to page.
If you encounter problems, look first at those instructions for assistance.
Current Run Plans
- 1 Current Run Plans
- 2 Your Responsibilities
- 2.1 Shift Leader
- 2.2 Target Operator
- 2.3 Third person
- 2.4 How To's: Instructions and How-to's for common problems
- 2.5 GMP How To's: You may find useful procedural information here since Hall A and C are similar.
- 2.6 Read-only Shift Schedule (Fall 2019 through Spring 2020)
- 2.7 Fall 2019 and Spring 2020 Shift Signup
The tasks listed below are not set in stone, you should use your own judgement and initiative. You should assist other shift workers in their tasks as needed.
NOTE: The Shift Leader is also responsible for the 3rd Person duties below. You can ask the TO for help too.
- Communicate clearly and effectively with shift crews and MCC (7047), and log any status information to the HCLOG
- Follow the run plan and co-ordinate switching to the next experimental configuration with other shift workers and the MCC as required.
- Maintain and update the Shift Summary detailing the events which occur while on shift
- This is done by starting the summary as a log entry titled "X Shift Summary" where X = Day, Swing, Owl
- Save & edit the summary after ANY event of interest occurs, including accesses
- This provides the readers with an up-to-date play by play of the current shift
- See example: https://logbooks.jlab.org/entry/3402742
- Record the purpose for every single run in the "Run list" binders (if available).
- Use the new configuration sheets for the first set of runs on any new setting.
- There are extra copies on the table in the middle of the counting house, if you run out the pdfs can be found here
- Keep track of beam time accounting
- More information on how how to work the Beam Time Accounting (BTA) web app
- Consult the Run Plan and communicate with the Run Coordinator whenever problems happen that cannot be solved by shift workers.
- Maintain data taking quality and an efficient use of beam time.
- Watch the target, see Pol He-3 Target Information
- Start and stop the DAQ. Ensure the correct PS factors are being used.
- Consult the run plan for estimated PS factors to be used for a given setting, adjust these up or down as needed
- Carry out 50k replays for the HMS and SHMS
- Compare 50k replay histograms with the sample ones and report to shift leader any unexplained differences. Hclog them.
- Assist the shift leader and third person with their duties
- Make certain that the Hall-C Alarm Handler process is running. See Hall_C_Alarm_Handler.
- If there are any alarms being ignored or silenced, find out why and enter this in the logbook.
- Log any alarms when they occur.
- Carry out online analysis of the data, communicate results and any issues with the shift leader/experts as required.
- Fill shift checklist once per shift.