Difference between revisions of "RC Meeting and Runplan, Friday, Sept 28"

From HallCWiki
Jump to: navigation, search
Line 3: Line 3:
 
**Beam was bad until around 6pm when MCC had solved the problem of the many trips coming from Hall B beam.
 
**Beam was bad until around 6pm when MCC had solved the problem of the many trips coming from Hall B beam.
 
** When changing to set the HMS at 6 GeV , The HMS Q3 would not stay at a given set current. This put into doubt the the higher momentum HMS optics data (taken at 6.6 and 6.3).
 
** When changing to set the HMS at 6 GeV , The HMS Q3 would not stay at a given set current. This put into doubt the the higher momentum HMS optics data (taken at 6.6 and 6.3).
−
** MCC was able to deliver up to 60uA on the owl shift. Given problem with HMS, decided to do the BCM which was completed. After BCM data was taken , then continued with the SHMS optics which was completed.
+
** MCC was able to deliver up to 60uA on the owl shift. Given problem with HMS, decided to do the BCM which was completed. https://logbooks.jlab.org/entry/3599568
 +
**After BCM data was taken , then continued with the SHMS optics which was completed.
 
**The Hall went into controlled access around 8:30 for work on the HMS Q3. Found that the opto-isolator was not pushed in all the way.
 
**The Hall went into controlled access around 8:30 for work on the HMS Q3. Found that the opto-isolator was not pushed in all the way.
 
**Around 9:00, MCC started the pass change for Hall A.
 
**Around 9:00, MCC started the pass change for Hall A.
−
**Around noon, started to receive beam and restarted the optics study for HMS ( repeated some SHMS)
+
**Around noon, started to receive beam and restarted the optics study for HMS ( repeated some SHMS). finsihed around 4:20.
 +
**Updated the EPICS BCM names and calibrations https://logbooks.jlab.org/entry/3599765
 +
** Start heepcheck runs ( about 9 hours).
  
 
*''Reports''
 
*''Reports''
Line 13: Line 16:
 
*''Issues''
 
*''Issues''
 
** Steve Wood to comment on importance of watching closely the GUI and TV screen when moving spectrometers.
 
** Steve Wood to comment on importance of watching closely the GUI and TV screen when moving spectrometers.
−
** Changing the attenuator of the SHMS Cer sum that is used to monitor that leg of the trigger.
+
** Changing the attenuator of the SHMS Cer sum that is used to monitor that leg of the trigger for 0.3 to 1.0 . https://logbooks.jlab.org/entry/3599768
 +
** HMS UPS is bad. Jumpered interlock.  https://logbooks.jlab.org/entry/3599763
 +
** Gas shed https://logbooks.jlab.org/entry/3599543

Revision as of 16:21, 28 September 2018

  • Status
    • Yesterday the HMS quad work was completed by about 1pm and we started the optics study of HMS/SHMS at high momentum.
    • Beam was bad until around 6pm when MCC had solved the problem of the many trips coming from Hall B beam.
    • When changing to set the HMS at 6 GeV , The HMS Q3 would not stay at a given set current. This put into doubt the the higher momentum HMS optics data (taken at 6.6 and 6.3).
    • MCC was able to deliver up to 60uA on the owl shift. Given problem with HMS, decided to do the BCM which was completed. https://logbooks.jlab.org/entry/3599568
    • After BCM data was taken , then continued with the SHMS optics which was completed.
    • The Hall went into controlled access around 8:30 for work on the HMS Q3. Found that the opto-isolator was not pushed in all the way.
    • Around 9:00, MCC started the pass change for Hall A.
    • Around noon, started to receive beam and restarted the optics study for HMS ( repeated some SHMS). finsihed around 4:20.
    • Updated the EPICS BCM names and calibrations https://logbooks.jlab.org/entry/3599765
    • Start heepcheck runs ( about 9 hours).
Retrieved from "https://hallcweb.jlab.org/wiki/index.php?title=RC_Meeting_and_Runplan,_Friday,_Sept_28&oldid=9357"