Difference between revisions of "Spring 2018 Commissioning"

From HallCWiki
Jump to: navigation, search
(DAQ/Trigger Run Plans)
(DAQ/Trigger Run Plans)
Line 25: Line 25:
 
= DAQ/Trigger Run Plans =
 
= DAQ/Trigger Run Plans =
  
* SHMS & HMS Mode 10 runs
+
== SHMS & HMS Mode 10 Runs ==
** SHMS Runs
+
  Any kinematics, 100k events
+
  Any kinematics, 100k events, EDTM on at 100 Hz
+
** HMS Runs
+
  Any kinematics, 100k events
+
  Any kinematics, 100k events, EDTM on at 100 Hz
+
  
* SHMS & HMS EDTM Studies
+
* SHMS Runs
** SHMS Single arm EDTM runs at various rates
+
Any kinematics, 100k events
  SHMS Run: Any kinematics, EDTM at 10 Hz (if running longer than 30 minutes)
+
Any kinematics, 100k events, EDTM on at 100 Hz
  SHMS Run: Any kinematics, EDTM at 100 Hz (if running less than 30 minutes)
+
* HMS Runs
* HMS Single arm EDTM runs at various rates
+
Any kinematics, 100k events
  HMS Run: Any kinematics, EDTM at 10 Hz (if running longer than 30 minutes)
+
Any kinematics, 100k events, EDTM on at 100 Hz
  HMS Run: Any kinematics, EDTM at 100 Hz (if running less than 30 minutes)
+
  
 +
== Single Arm and Coincidence EDTM Studies ==
 +
 +
* SHMS Single arm EDTM runs at various rates
 +
# SHMS Run: Any kinematics, EDTM at 10 Hz
 +
# SHMS Run: Any kinematics, EDTM at 100 Hz
 +
* HMS Single arm EDTM runs at various rates
 +
# HMS Run: Any kinematics, EDTM at 10 Hz
 +
# HMS Run: Any kinematics, EDTM at 100 Hz
 
* Coincidence EDTM runs at various rates
 
* Coincidence EDTM runs at various rates
Coincidence Run: Any kinematics, EDTM at 10 Hz (if running longer than 30 minutes)
+
# Coincidence Run: Any kinematics, EDTM at 10 Hz
Coincidence Run: Any kinematics, EDTM at 100 Hz (if running less than 30 minutes)
+
# Coincidence Run: Any kinematics, EDTM at 100 Hz
  
* SHMS PID threshold scan with NGC in trigger (HGC was previously utilized)
+
== Trigger PID Threshold Scans ==
*# NGCER 40, PRSH-LO 40, PRSH-HI 60
+
*# NGCER 30, PRSH-LO 30, PRSH-HI 50
+
*# NGCER 25, PRSH-LO 25, PRSH-HI 40
+
*# NGCER 20, PRSH-LO 20, PRSH-HI 30
+
*# NGCER 15, PRSH-LO 15, PRSH-HI 20
+
*# NGCER 10, PRSH-LO 10, PRSH-HI 10
+
  
 +
* SHMS PID threshold scan with NGC in trigger (HGC was previously utilized)
 +
# NGCER 40, PRSH-LO 40, PRSH-HI 60
 +
# NGCER 30, PRSH-LO 30, PRSH-HI 50
 +
# NGCER 25, PRSH-LO 25, PRSH-HI 40
 +
# NGCER 20, PRSH-LO 20, PRSH-HI 30
 +
# NGCER 15, PRSH-LO 15, PRSH-HI 20
 +
# NGCER 10, PRSH-LO 10, PRSH-HI 10
  
* Single arm SHMS & HMS runs with EL-REAL and EL-CLEAN being readout (need to time these in at the TI front panel)
+
* HMS PID threshold scan
 +
# CER 40, PRSH-LO 40, PRSH-HI 60, SH-LO 40 ---> These are the initial settings
 +
# CER 30, PRSH-LO 30, PRSH-HI 50, SH-LO 30
 +
# CER 25, PRSH-LO 25, PRSH-HI 40, SH-LO 25
 +
# CER 20, PRSH-LO 20, PRSH-HI 30, SH-LO 20
 +
# CER 15, PRSH-LO 15, PRSH-HI 20, SH-LO 15
 +
# CER 10, PRSH-LO 10, PRSH-HI 10, SH-LO 10
  
 +
== Single arm SHMS & HMS runs with EL-REAL and EL-CLEAN being readout (need to time these in at the TI front panel) ==
  
 +
* SHMS single arm multi-trigger type studies
 +
# Any kinematics, 500k events, EDTM off
 +
# Any kinematics, 500k events, EDTM on at 10 Hz
  
* Trigger PID threshold scans
+
* HMS single arm multi-trigger type studies
 +
# Any kinematics, 500k events, EDTM off
 +
# Any kinematics, 500k events, EDTM on at 10 Hz
  
 
= Talks =
 
= Talks =

Revision as of 10:29, 9 January 2018

Overview

Topics which are relevant to the DAQ/Trigger for the Spring 2018 commissioning run are discussed here.

To-Do

  • High Priority
    • Configure Dave G. Dead time measurement scheme (Arrington’s and/or Morhings thesis)
    • Configure NGC into SHMS PID trigger leg in place of HGC
    • Sanity check SHMS hodoscope CAMAC power supply (noticed unstable behavior during end of fall run)
    • Add SHMS PRSHWRSUM in trigger apparatus (FADC leaf)
    • Remove layer B from HMS pre-shower sum
  • Medium Priority
    • Figure out DAC to mV conversion factor, find old talk regarding setting the DAC values to obtain pedestals a pre-determined value
    • Include multi-hit capability in the trigger apparatus for reference times
    • Integrate TI scalers into report files
    • Configure OR of hodoscope trigger logic into TDC’s and scalers
    • Change trigger leaf names to PRLO from PRSHWRLO etc. (needs to match xscaler)
  • Low Priority
    • Add number of FADC error flags to the report files (front and center)
    • Add number of pulses identified in the window to data tree

DAQ/Trigger Run Plans

SHMS & HMS Mode 10 Runs

  • SHMS Runs
Any kinematics, 100k events
Any kinematics, 100k events, EDTM on at 100 Hz
  • HMS Runs
Any kinematics, 100k events
Any kinematics, 100k events, EDTM on at 100 Hz

Single Arm and Coincidence EDTM Studies

  • SHMS Single arm EDTM runs at various rates
  1. SHMS Run: Any kinematics, EDTM at 10 Hz
  2. SHMS Run: Any kinematics, EDTM at 100 Hz
  • HMS Single arm EDTM runs at various rates
  1. HMS Run: Any kinematics, EDTM at 10 Hz
  2. HMS Run: Any kinematics, EDTM at 100 Hz
  • Coincidence EDTM runs at various rates
  1. Coincidence Run: Any kinematics, EDTM at 10 Hz
  2. Coincidence Run: Any kinematics, EDTM at 100 Hz

Trigger PID Threshold Scans

  • SHMS PID threshold scan with NGC in trigger (HGC was previously utilized)
  1. NGCER 40, PRSH-LO 40, PRSH-HI 60
  2. NGCER 30, PRSH-LO 30, PRSH-HI 50
  3. NGCER 25, PRSH-LO 25, PRSH-HI 40
  4. NGCER 20, PRSH-LO 20, PRSH-HI 30
  5. NGCER 15, PRSH-LO 15, PRSH-HI 20
  6. NGCER 10, PRSH-LO 10, PRSH-HI 10
  • HMS PID threshold scan
  1. CER 40, PRSH-LO 40, PRSH-HI 60, SH-LO 40 ---> These are the initial settings
  2. CER 30, PRSH-LO 30, PRSH-HI 50, SH-LO 30
  3. CER 25, PRSH-LO 25, PRSH-HI 40, SH-LO 25
  4. CER 20, PRSH-LO 20, PRSH-HI 30, SH-LO 20
  5. CER 15, PRSH-LO 15, PRSH-HI 20, SH-LO 15
  6. CER 10, PRSH-LO 10, PRSH-HI 10, SH-LO 10

Single arm SHMS & HMS runs with EL-REAL and EL-CLEAN being readout (need to time these in at the TI front panel)

  • SHMS single arm multi-trigger type studies
  1. Any kinematics, 500k events, EDTM off
  2. Any kinematics, 500k events, EDTM on at 10 Hz
  • HMS single arm multi-trigger type studies
  1. Any kinematics, 500k events, EDTM off
  2. Any kinematics, 500k events, EDTM on at 10 Hz

Talks

Log Book Entries