Video capture systems
Video Capture Systems
The video/camera setup in Hall C is accessed through [] or go_cameras.
Note: Users operating inside the Counting House have more access than those outside the fence.  only works from within the Hall C subnet.
There are two classes of cameras involved: 'legacy' NTSC cameras (angle cams, etc), and IP/network cameras. The interface/software used to consolidate the systems for the end users is [motion].
NTSC cameras and the Frame-Grabber
- The SHMS and HMS 'Angle cameras' are both legacy NTSC cameras viewing the graduated rail at the rear of each spectrometer.
- The 'Target Camera' (when functioning) is also NTSC.
- The 'HMS Hut' Camera is a legacy NTSC camera.
The video feeds from these cameras is fed into a frame grabber installed in cvideo1 where they are digitized, archived, and served to the user through a combination of 'motion' and a pretty simple web interface manged by a set of cron jobs and perl scripts running under cvideo@cvideo1.
The 'Adlink RTV24' framegrabber has 4 inputs on its PCI card, but can be expanded to handle up to 16 inputs pretty easily. However, this is largely and obsolete technology.
The three Hall cameras are IP/Network cameras
- hccam01, hccam03 are Panasonic WV-SC385 units. Good cameras, lousy software, obsolete and no longer sold.
- They can only be configured using Window 7'ish era Microsoft Internet Explorer. Yeah. I manage this using an ancient, locked-down Virtualbox VM (VM is functionally r/o and is only run when the camera firmware needs to be configured.)
- hccam02 is a new Panasonic/Advidia M-200-P Network Camera
- As of this writing, its user interface behaved poorly with the rather old version of Firefox provided by JLab/RHEL7 (newer versions of Firefox work just fine though). For now, Google Chrome was installed on the Hall C cluster as a work-around. 'go_cameras' takes this into account.
There are several other IP/network cameras in use throughout Hall C for monitoring gauges, power supplies etc. They are named 'hccamNN' with NN==04, 05, etc. and require little to no configuration. See the 'motion' configuration on cvideo1 for details.