Next: Enge controller and monitor Up: Hall C User Howto Previous: Operation for HKS-D, q1

Monitor for HKS-D, q1 and q2

Login any PC of cdaql1 - cdaql6 with 'cvxwrks' and go to /home/cvxwrks/MEDM/HKS. Type mag-monitor.tcl and see the window of Magnet monitor for E01-011. This screen is to monitor the current status of magnets. Push the button of 'Show all' to check the current fault status.

Check the current status is as follows,

Mode ; Remote
Status; ON
Polarity ; Positive
B field (Tesla) ; measurements by Hall probe/NMR refer to Table 1.
Fault ;All are 'OK'.

Stephen A. Wood 2005-06-17