Jefferson Lab Hall C Logbook for July 06 - Full Listing
Main INDEX
Monday
119524 07/31/06 23:20 Flores Analysis: Ratio between fastbus rates and scalers rates
119523 07/31/06 23:11 gzero Run 30106: lh2 production, 60uA
119522 07/31/06 23:09 gzero End of Run 30105:
119521 07/31/06 22:30 Beck Beam: Lumi and parity-quality snapshots
119520 07/31/06 22:11 gzero Run 30105: lh2 production, 60uA
119519 07/31/06 22:07 gzero End of Run 30104:
119518 07/31/06 21:40 Goulven,JSR Cerenkov random rates from fastbus data, C12 60uA (better format !!!)
119517 07/31/06 21:38 Goulven,JSR Cerenkov random rates from fastbus data, C12 60uA (better format ?)
119516 07/31/06 21:31 Goulven,JSR Cerenkov random rates from fastbus data, C12 60uA
119515 07/31/06 21:12 gzero Run 30104: lh2 production, 60uA
119514 07/31/06 21:07 gzero End of Run 30103:
119513 07/31/06 20:30 suleiman Beam: The G0 Cavity I measurement
119512 07/31/06 20:07 gzero Run 30103: lh2 production, 60uA
119511 07/31/06 20:05 gzero End of Run 30102:
119510 07/31/06 19:06 gzero Run 30102: lh2 production, 60uA
119509 07/31/06 19:03 gzero End of Run 30101:
119508 07/31/06 18:49 pking Analysis: Re-ran the autoanalyzer for runs 30096-30100.
119507 07/31/06 18:16 Spayde Analysis: IPM0I07 Variables Added to Database
119506 07/31/06 18:13 pking Analysis: Minor correction to injector mapping file on gzero account.
119505 07/31/06 17:59 gzero Run 30101: lh2 production, 60uA
119504 07/31/06 17:58 gzero End of Run 30100:
119503 07/31/06 17:41 gzero Run 30100: lh2 production, 60uA 10 min test for Mark
119502 07/31/06 17:40 gzero End of Run 30099:
119501 07/31/06 17:33 Fatiha Chasing the double peak (+ Instructions)
119500 07/31/06 17:24 gzero Run 30099: junk
119499 07/31/06 17:08 Pitt Swing/owl run plan
119498 07/31/06 16:58 Pitt "Normal" running conditions as of 7/31/06
119497 07/31/06 16:50 cdaq Beam Time Accounting
119496 07/31/06 16:10 jmammei Beam: cavity monitor commissioning
119495 07/31/06 15:31 neven Day Shift Summary
119494 07/31/06 15:15 suleiman Beam: 0I02, 0I02A, & 0I05 are now fixed and 0I07 looks fine so far
119493 07/31/06 14:49 gzero End of Run 30098:
119492 07/31/06 14:46 gzero Run 30098: Test run: Charge asymmetry
119491 07/31/06 14:31 suleiman Beam: 0I07 Injector BPM is now in the Datastream
119490 07/31/06 14:29 Spayde Beam: Recent Beam Parameter Differences/Asymmetries as a Function of Time
119489 07/31/06 14:23 suleiman Beam: Injector BCM/BPM Calibration
119488 07/31/06 14:18 suleiman Beam: Injector BCM/BPM Calibration
119487 07/31/06 13:54 Spayde/Mueth SMS: Magnet Problem Fixed
119486 07/31/06 13:35 gzero End of Run 30097:
119485 07/31/06 13:18 gzero Run 30097: Injector BCM/BPM Calibration - 0I02,0I02A, & 0I05 fixed, 0I07 added to the data stream (first run with this addition)
119484 07/31/06 12:46 gzero End of Run 30096:
119483 07/31/06 12:41 gzero Run 30096: Charge asym., Beam in the injector only
119482 07/31/06 12:32 hood Analysis: script to help with charge asymmetry flat-top problem
119481 07/31/06 12:17 Alex Analysis: BPO Timing Scan - Multiple hits
119480 07/31/06 11:53 Fatiha Some useful Viewers for people on shift
119479 07/31/06 10:46 hood Target: IOC stripped replaced, swtich to manual
119478 07/31/06 09:51 gzero End of Run 30095:
119477 07/31/06 09:47 gzero Run 30095: Test run. No beam.
119476 07/31/06 09:09 muether SMS: Water Temp during Quench Protection Problem
119475 07/31/06 08:55 Breuer another test detector configuration change.
119474 07/31/06 08:51 Breuer renewed exchange of octant 7 FPD 13 Left phototube with base
119473 07/31/06 08:44 muether SMS: AQP/DQP Problem
119472 07/31/06 08:17 Breuer Test detector configuration changes last night at about 10 pm
119471 07/31/06 08:03 cdaq Beam Time Accounting
119470 07/31/06 07:58 Breuer shift summary, Monday 07/31/06, 00:00 to 08:00
119469 07/31/06 07:29 Breuer Test detector results: pieces of quartz and borosilicate glass (5" tube fragment)
119468 07/31/06 07:02 Page SMS: unplanned slow dump of SMS
119467 07/31/06 06:51 gzero End of Run 30094:
119466 07/31/06 06:41 gzero End of Run 30094:
119465 07/31/06 06:41 gzero Run 30094: lh2 production, 60uA
119464 07/31/06 05:28 gzero Run 30093: lh2 production, 60uA
119463 07/31/06 05:19 gzero End of Run 30092:
119462 07/31/06 04:58 Page Target: Coolant flows back to normal
119461 07/31/06 04:26 Page Target: Target - 15K Coolant issue, Hall A getting greedy...
119460 07/31/06 04:21 gzero Run 30092: lh2 production, 60uA
119459 07/31/06 04:20 gzero End of Run 30091:
119458 07/31/06 03:35 Page Beam: bpm and halo snapshots - 3:30 am log
119457 07/31/06 03:04 gzero Run 30091: lh2 production, 60uA
119456 07/31/06 03:03 gzero End of Run 30090:
119455 07/31/06 02:47 Page SMS: magnet control - transport protocol error
119454 07/31/06 02:06 page snapshot of CED- FPD time differences
119453 07/31/06 01:51 gzero Run 30090: lh2 production, 60uA
119452 07/31/06 01:50 gzero End of Run 30089:
119451 07/31/06 00:42 gzero Run 30089: lh2 production, 60uA
119450 07/31/06 00:40 gzero End of Run 30088:
119449 07/31/06 00:39 Maud,JSR NO Clear Evidence of Pions in LH2 target Runs in "Elastic" coincidence cells (FastBus Data)
119448 07/31/06 00:22 Maud,JSR Clear Evidence of Pions in C target Runs (FastBus Data)
119447 07/31/06 00:20 real Swing Shift Summary
119446 07/31/06 00:12 gzero Run 30088: lh2 production, 60uA
119445 07/31/06 00:10 gzero End of Run 30087:
119444 07/31/06 00:09 cdaq Beam Time Accounting
Sunday
119443 07/30/06 23:35 Larry Estimated Anode currents for "new" Cerenkov HV settings
119442 07/30/06 22:30 real Access to the Hall, for changing PMT 7-13L, and shielding
119441 07/30/06 22:27 gzero Run 30087: lh2 production, 60uA
119440 07/30/06 21:24 Pitt Analysis: Lumi width and asymmetry versus beam current
119439 07/30/06 21:21 gzero End of Run 30086:
119438 07/30/06 20:48 real Hall A polarization??
119437 07/30/06 20:10 gzero Run 30086: lh2 production, 60uA
119436 07/30/06 20:06 gzero End of Run 30085:
119435 07/30/06 19:22 real New set of HV for French cerenkov
119434 07/30/06 19:03 real HV new cerenkov value updated before run 30085
119433 07/30/06 19:02 gzero Run 30085: lh2 production, 60uA
119432 07/30/06 18:58 real New set of HV for French cerenkov
119431 07/30/06 18:57 Larry Updated HV for NA Cerenkov PMTs
119430 07/30/06 18:51 gzero End of Run 30084:
119429 07/30/06 17:43 Goulven NA ARS : last delay modification...
119428 07/30/06 17:43 Larry Recommended "New" HV for NA Cerenkov PMTs
119427 07/30/06 17:25 gzero Run 30084: lh2 production, 60uA
119426 07/30/06 17:23 gzero End of Run 30083:
119425 07/30/06 16:24 cdaq Beam Time Accounting
119424 07/30/06 16:01 gzero Run 30083: lh2 production, 60uA
119423 07/30/06 15:59 gzero End of Run 30082:
119422 07/30/06 15:45 neven Day Shift Summary
119421 07/30/06 15:34 Alex/Damon Analysis: fourier transform of BCM1 charge - Run #30073 , 1Hz flutuation
119420 07/30/06 15:06 Goulven NA ARS : New delays corrections during run 30081
119419 07/30/06 15:04 Goulven NA ARS : New delays corrections during run 30081
119418 07/30/06 15:00 gzero Run 30082: lh2 production, 60uA
119417 07/30/06 14:59 gzero End of Run 30081:
119416 07/30/06 14:50 Spayde Positions and Halo Snapshot for Shift Checklist
119415 07/30/06 14:05 gzero Run 30081: lh2 production, 60uA
119414 07/30/06 14:05 neven Beam back
119413 07/30/06 14:03 gzero End of Run 30080:
119412 07/30/06 13:57 gzero Run 30080: lh2 production, 60uA
119411 07/30/06 13:54 Goulven NA ARS : some delays changed
119410 07/30/06 13:14 neven No usefull beam since 12:20
119409 07/30/06 13:07 gzero End of Run 30079:
119408 07/30/06 12:59 pking Beam: Charge asymmetry distribution doesn't seem correlated with previous QRT polarities
119407 07/30/06 12:12 smithg Target: missing heater values
119406 07/30/06 12:02 Pitt Beam: Flat-top charge distribution cut on QRTPOL = +1 and -1
119405 07/30/06 12:00 gzero Run 30079: lh2 production, 60uA
119404 07/30/06 11:59 gzero End of Run 30078:
119403 07/30/06 11:58 Spayde Analysis: Charge Asymmetry Widths in Injector for Run 30073
119402 07/30/06 11:05 gzero Run 30078: lh2 production, 60uA
119401 07/30/06 11:03 gzero End of Run 30077:
119400 07/30/06 10:13 Pitt Beam: Position difference widths throughout Hall C
119399 07/30/06 10:12 Spayde Analysis: Fraser Plots for Run 29989-30075 (approximately)
119398 07/30/06 10:01 gzero Run 30077: lh2 production, 60uA
119397 07/30/06 10:00 gzero End of Run 30076:
119396 07/30/06 08:53 gzero Run 30076: lh2 production, 60uA
119395 07/30/06 08:52 gzero End of Run 30075:
119394 07/30/06 08:05 cdaq Beam Time Accounting
119393 07/30/06 08:05 Breuer shift summary
119392 07/30/06 07:54 gzero Run 30075: lh2 production, 60uA
119391 07/30/06 07:52 gzero End of Run 30074:
119390 07/30/06 06:46 page Target: Target heater power control display problem
119389 07/30/06 06:33 gzero Run 30074: lh2 production, 60uA
119388 07/30/06 06:30 gzero End of Run 30073:
119387 07/30/06 05:18 gzero Run 30073: lh2 production, 60uA
119386 07/30/06 05:14 gzero End of Run 30072:
119385 07/30/06 04:28 gzero Run 30072: lh2 production, 60uA
119384 07/30/06 04:27 gzero End of Run 30071:
119383 07/30/06 04:04 gzero End of Run 30071:
119382 07/30/06 03:27 gzero Run 30071: lh2 production, 60uA
119381 07/30/06 03:07 page unstable halo rates - back to normal now
119380 07/30/06 03:01 page bpm and halo snapshots
119379 07/30/06 02:21 gzero Run 30070: lh2 production, 60uA
119378 07/30/06 02:19 gzero End of Run 30069:
119377 07/30/06 01:20 Breuer HV for octant 7 FPD 13 L had tripped earlier, reset
119376 07/30/06 01:19 page intermittent Cerenkov signals
119375 07/30/06 01:18 gzero Run 30069: lh2 production, 60uA
119374 07/30/06 01:17 gzero End of Run 30068:
119373 07/30/06 00:19 gzero Run 30068: lh2 production, 60uA
119372 07/30/06 00:14 gzero End of Run 30067:
119371 07/30/06 00:10 real Swing Shift Summary
119370 07/30/06 00:02 cdaq Beam Time Accounting
Saturday
119369 07/29/06 23:36 real Cerenkov PMT1 of octant 6 was off
119368 07/29/06 23:15 real Set gain for french cerenkov where it was before
119367 07/29/06 23:14 gzero Run 30067: lh2 production, 60uA
119366 07/29/06 23:11 gzero End of Run 30066:
119365 07/29/06 23:02 gzero Run 30066: lh2 production, 60uA -2ns on cerenkov gate octant 6
119364 07/29/06 23:01 gzero End of Run 30065:
119363 07/29/06 22:56 real timing for cerenkov octant 2 has been set has it should, width=26ns,
119362 07/29/06 22:54 gzero Run 30065: lh2 production, 60uA -2ns on cerenkov gate ocatnt 6
119361 07/29/06 22:53 gzero End of Run 30064:
119360 07/29/06 22:25 Spayde SMS: Strange Magnet Alarms (with figures attached this time)
119359 07/29/06 22:15 Spayde SMS: Strange Magnet Alarms
119358 07/29/06 22:00 gzero Run 30064: lh2 production, 60uA, Timing Cer 2 changed
119357 07/29/06 22:00 gzero End of Run 30063:
119356 07/29/06 21:53 real Changing timing of cerenkov trigger Octant 2
119355 07/29/06 21:51 gzero Run 30063: lh2 production, 60uA, Timing Cer 2 changed
119354 07/29/06 21:49 gzero End of Run 30062:
119353 07/29/06 21:36 gzero Run 30062: lh2 production, 60uA, Timing Cer 2 changed
119352 07/29/06 21:35 real Changing width of cerenkov trigger Octant 2
119351 07/29/06 21:30 gzero End of Run 30061:
119350 07/29/06 20:48 Pitt Run plan for swing/owl
119349 07/29/06 20:48 Pitt Run plan for swing/owl
119348 07/29/06 20:45 Pitt Run plan for swing/owl
119347 07/29/06 20:33 real Change of half wave plate state was OUT, is IN
119346 07/29/06 20:28 gzero Run 30061: lh2 production, 60uA
119345 07/29/06 20:14 gzero End of Run 30060:
119344 07/29/06 19:29 Breuer Changes for test detectors: shielding, glass pieces
119343 07/29/06 19:26 jschaub Analysis: Base BPM Plots
119342 07/29/06 19:18 Breuer exchanged NA Oct 7 FPD 13 left tube+base; still bad, differently
119341 07/29/06 18:59 gzero Run 30060: lh2 production, 60uA
119340 07/29/06 18:57 gzero End of Run 30059:
119339 07/29/06 18:54 real New gain for the FR cerenkov after run 30055
119338 07/29/06 18:22 gzero Run 30059: lh2 production, 60uA
119337 07/29/06 18:20 gzero End of Run 30058:
119336 07/29/06 18:08 gzero Run 30058: cerenkov threshold scan while moving target (new gain)
119335 07/29/06 18:06 gzero End of Run 30057:
119334 07/29/06 17:33 gzero Run 30057: C12, Beam current scan
119333 07/29/06 17:32 gzero End of Run 30056:
119332 07/29/06 17:20 gzero Run 30056: C12, 60uA
119331 07/29/06 17:16 gzero End of Run 30055:
119330 07/29/06 17:10 gzero Run 30055: C12 target, and gain macthing for FPD 13 oct 7
119329 07/29/06 17:09 gzero End of Run 30054:
119328 07/29/06 17:05 gzero Run 30054: C12 target, and gain macthing for FPD 13 oct 7
119327 07/29/06 17:04 gzero End of Run 30053:
119326 07/29/06 16:49 Spayde Day Shift Summary
119325 07/29/06 16:43 gzero Run 30053: Cerenkov Threshold Scan with Beam C12 target, and gain macthing for FPD 13 oct 7
119324 07/29/06 16:41 cdaq Beam Time Accounting
119323 07/29/06 16:28 gzero End of Run 30052:
119322 07/29/06 15:50 real Run 30052 is taken, while Hall A make their BCM calibration.
119321 07/29/06 15:49 real Hall Access to change Octant 7 PMT, and change PMT test shielding configuration
119320 07/29/06 15:46 Maud Analysis: Take a look at Cerenkov individual count rates vs beam current NOW!
119319 07/29/06 15:32 Flores Target: Change target to Carbon
119318 07/29/06 15:27 gzero Run 30052: Cerenkov Threshold Scan with No Beam
119317 07/29/06 15:24 gzero End of Run 30051:
119316 07/29/06 14:58 Spayde DAQ Settings for Threshold Scan Run
119315 07/29/06 14:56 gzero Run 30051: Cerenkov Threshold Scan with Beam
119314 07/29/06 14:53 gzero End of Run 30050:
119313 07/29/06 14:11 gzero Run 30050: lh2 production, 60uA
119312 07/29/06 14:10 gzero End of Run 30049:
119311 07/29/06 13:05 gzero Run 30049: lh2 production, 60uA
119310 07/29/06 13:03 gzero End of Run 30048:
119309 07/29/06 12:36 gzero Run 30048: lh2 production, 60uA
119308 07/29/06 12:25 gzero End of Run 30047:
119307 07/29/06 11:56 Spayde Trouble in Injector
119306 07/29/06 11:52 Spayde Automatic Coil Pulsing Reenabled at Start of Each Run
119305 07/29/06 11:47 gzero Run 30047: lh2 production, 60uA
119304 07/29/06 11:45 gzero End of Run 30046:
119303 07/29/06 11:41 Spayde Lumi Snapshot at G0=(0.385,0.378) and G0B=(-0.116,0.354)
119302 07/29/06 11:39 Spayde Turning Detector HVs On
119301 07/29/06 11:36 Spayde Lumi Snapshot at G0=(0.412,-0.260) and G0B=(-0.115,-0.488)
119300 07/29/06 11:19 Spayde Lumi Snapshot at G0=(0.319,1.836) and G0B=(-0.112,2.025)
119299 07/29/06 11:13 Spayde Lumi Snapshot at G0=(1.203,0.257) and G0B=(0.850, 0.050)
119298 07/29/06 11:04 Spayde Lumi Snapshot G0 at (-0.814,0.261) and G0B at (-1.587, 0.132)
119297 07/29/06 10:56 gzero Run 30046: Lumi-Position Sensitivity Scan
119296 07/29/06 10:55 gzero End of Run 30045:
119295 07/29/06 10:55 Spayde LUMI Snapshot G0=(0.308, 0.186) and G0B=(-0.222,0.115)
119294 07/29/06 10:46 gzero Run 30045: Beam Checkout, 60uA, No Detectors, Beam moved 1 mm to Right
119293 07/29/06 10:43 Spayde LUMI Snapshot and Halo Rates at Nominal Position
119292 07/29/06 10:42 gzero End of Run 30044:
119291 07/29/06 10:33 gzero Run 30044: Beam Checkout, 60uA, No Detectors
119290 07/29/06 10:07 Spayde Detector HVs Tripped Off
119289 07/29/06 10:00 Spayde Changing Quad 3C20A
119288 07/29/06 09:55 gzero End of Run 30043:
119287 07/29/06 09:52 Spayde Position Differences During Current Run
119286 07/29/06 08:58 gzero Run 30043: lh2 production, 60uA
119285 07/29/06 08:49 Larry Plots of beam Y-position scans
119284 07/29/06 08:17 Larry Owl shift summary
119283 07/29/06 08:13 cdaq Beam Time Accounting
119282 07/29/06 07:16 Larry Halos bad again.
119281 07/29/06 07:07 gzero End of Run 30042:
119280 07/29/06 06:50 gzero Run 30042: Production, LH2, 60uA, SMS at 2650 A
119279 07/29/06 06:47 Larry Halos back down
119278 07/29/06 06:19 Larry Summary of beam y-position scan
119277 07/29/06 06:14 Larry More beam-tuning
119276 07/29/06 06:09 Larry Something changed, Halos large again
119275 07/29/06 05:54 gzero End of Run 30041:
119274 07/29/06 05:52 Larry Lumi snapshot at G0=(+0.3,-1.4) G0B=(-0.3,-1.6)
119273 07/29/06 05:47 gzero Run 30041: LH2, 60uA, position scan G0=(+0.3,-1.4) G0B=(-0.3,-1.6)
119272 07/29/06 05:42 gzero End of Run 30040:
119271 07/29/06 05:41 Larry Lumi snapshot at G0=(+0.3,-1.0) G0B=(-0.3,-1.0)
119270 07/29/06 05:32 gzero Run 30040: LH2, 60uA, position scan G0=(+0.3,-1.0) G0B=(-0.3,-1.0)
119269 07/29/06 05:26 gzero End of Run 30039:
119268 07/29/06 05:24 Larry Lumi snapshot at G0=(+0.3,-0.5) G0B=(-0.3,-0.5)
119267 07/29/06 05:19 gzero Run 30039: LH2, 60uA, position scan G0=(+0.3,-0.5) G0B=(-0.3,-0.5)
119266 07/29/06 05:11 gzero End of Run 30038:
119265 07/29/06 05:10 Larry Lumi snapshot at G0=(+0.3,+1.4) G0B=(-0.3,+1.7)
119264 07/29/06 05:06 gzero Run 30038: LH2, 60uA, position scan G0=(+0.3,+1.4) G0B=(-0.3,+1.7)
119263 07/29/06 04:59 gzero End of Run 30037:
119262 07/29/06 04:58 Larry Lumi snapshot at G0=(+0.3,+1.0) G0B=(-0.3,+1.0)
119261 07/29/06 04:53 gzero Run 30037: LH2, 60uA, position scan G0=(+0.3,+1.0) G0B=(-0.3,+1.0)
119260 07/29/06 04:47 gzero End of Run 30036:
119259 07/29/06 04:46 Larry Lumi snapshot at G0=(+0.3,+0.5) G0B=(-0.3,+0.5)
119258 07/29/06 04:41 gzero Run 30036: LH2, 60uA, position scan G0=(+0.3,+0.5) G0B=(-0.3,+0.5)
119257 07/29/06 04:33 gzero End of Run 30035:
119256 07/29/06 04:33 Larry Lumi snapshot at G0=(+0.3,0.0) G0B=(-0.3,0.0)
119255 07/29/06 04:26 gzero Run 30035: LH2, 60uA, position scan G0=(+0.3,0.0) G0B=(-0.3,0.0)
119254 07/29/06 04:22 Larry HV turn-on
119253 07/29/06 04:21 Larry Beam is back
119252 07/29/06 04:08 Larry Progress with the beam-tuning
119251 07/29/06 02:28 Larry 4 uA of beam into Hall C
119250 07/29/06 02:15 Larry Moller alarm reset
119249 07/29/06 02:00 Larry Moller alarm and Moller Quads 1 and 2
119248 07/29/06 01:35 Larry Moller alarm
119247 07/29/06 01:28 real random CED-FPD trigger for LH2 and C12
119246 07/29/06 01:03 real Legend of figure for logentry 119245
119245 07/29/06 00:51 real No Evidence for pions in LH2 target, from fastbus data.
119244 07/29/06 00:50 real No Evidence for pions in LH2 target, from fastbus data.
119243 07/29/06 00:24 Larry Optics expert tuning
119242 07/29/06 00:12 real Swing Shift Summary
119241 07/29/06 00:05 cdaq Beam Time Accounting
Friday
119240 07/28/06 23:52 real New Setting for french cerenkov (to be setup sometimes when we have beam)
119239 07/28/06 22:48 real/herbert lowered HV for octant 7 FPD 13 Left
119238 07/28/06 21:31 suleiman Beam: Position Differences and Charge Asymmetry for run 30020 (OUT)
119237 07/28/06 21:15 gaskell Moller summary
119236 07/28/06 21:09 gaskell half wave plate is OUT again
119235 07/28/06 21:09 gaskell Moller backout
119234 07/28/06 21:00 cdaq Moller Run 61704: Moller checkout
119233 07/28/06 20:55 suleiman Beam: Position Differences and Charge Asymmetry for run 29999 (IN)
119232 07/28/06 20:49 Pitt/Suleima Beam: Origination of "flat-top" charge asymmetry distribution
119231 07/28/06 20:44 pking Analysis: I have made G0Analysis_2.16 the default analyzer on the gzero accounts
119230 07/28/06 20:43 cdaq Moller Run 61703: Moller checkout
119229 07/28/06 20:33 cdaq Moller Run 61702: Moller checkout
119228 07/28/06 20:31 gaskell changed half wave plate
119227 07/28/06 20:27 cdaq Moller Run 61701: Moller checkout
119226 07/28/06 20:18 cdaq Moller Run 61700: Moller checkout
119225 07/28/06 20:10 gzero End of Run 30034:
119224 07/28/06 20:09 cdaq Moller Run 61699: Moller checkout
119223 07/28/06 20:08 gzero Run 30034: DAQ test
119222 07/28/06 20:07 cdaq Moller Run 61698: Moller checkout
119221 07/28/06 20:03 cdaq Moller Run 61697: Moller checkout
119220 07/28/06 19:43 gzero End of Run 30033:
119219 07/28/06 19:43 gzero Run 30033: DAQ test
119218 07/28/06 19:30 Toplosky Analysis: beam asymmetries
119217 07/28/06 18:47 gaskell another Moller update
119216 07/28/06 18:46 gaskell another Moller update
119215 07/28/06 17:26 gaskell Moller tune with no solenoid
119214 07/28/06 17:06 gaskell more Moller update
119213 07/28/06 16:19 Spayde Analysis: A Look at the 1 Hz Noise in the Injector and in Position
119212 07/28/06 16:04 Spayde Day Shift Summary
119211 07/28/06 16:01 cdaq Beam Time Accounting
119210 07/28/06 15:44 gaskell solenoid to 1 T
119209 07/28/06 14:50 gaskell ramping solenoid to 3 T
119208 07/28/06 14:45 jschaub Analysis: Amplitude Increase of the 1Hz Beam Current Structure
119207 07/28/06 14:44 gaskell more Moller update
119206 07/28/06 14:35 cdaq Moller Run 61696: Moller checkout (I Q1+3)
119205 07/28/06 14:30 cdaq Moller Run 61695: Moller checkout (I Q1+2)
119204 07/28/06 14:27 cdaq Moller Run 61694: Moller checkout
119203 07/28/06 14:23 cdaq Moller Run 61693: Moller checkout
119202 07/28/06 12:38 Spayde Analysis: Beam Current Fluctuations Still Present (and Maybe a Little Worse)
119201 07/28/06 12:02 horn Moller measurements - magnets scans
119200 07/28/06 11:44 cdaq Moller Run 61692: Moller checkout (I Q1=67.,I Q2=68)
119199 07/28/06 11:42 cdaq Moller Run 61691: Moller checkout (I Q1=69.,I Q2=68)
119198 07/28/06 11:39 cdaq Moller Run 61690: Moller checkout (I Q2=68)
119197 07/28/06 11:21 Spayde Analysis: First Fraser Plots from the Database
119196 07/28/06 11:10 real Cerenkov Trigger Rates and random contribution, LH2 target. No beam trigger fixed to 0.
119195 07/28/06 11:08 cdaq Moller Run 61689: Moller checkout (I Q1=71.395, scint on)
119194 07/28/06 11:07 cdaq Moller Run 61688: Moller checkout (I Q1=70.395, scint on)
119193 07/28/06 11:04 cdaq Moller Run 61687: Moller checkout (I Q1=69.395, scint on)
119192 07/28/06 11:00 cdaq Moller Run 61686: Moller checkout (I Q1=67.395, scint on)
119191 07/28/06 10:58 cdaq Moller Run 61685: Moller checkout (I Q1=65.395, scint on)
119190 07/28/06 10:54 cdaq Moller Run 61684: Moller checkout (I Q1=65.395)
119189 07/28/06 10:53 real Cerenkov Trigger Rates and random contribution, C12 target
119188 07/28/06 10:51 Spayde SMS: Run 29988 Reflagged as Junk
119187 07/28/06 10:50 cdaq Moller Run 61683: Moller checkout
119186 07/28/06 10:38 swells large NA multiple hit rates
119185 07/28/06 10:26 swells NA electronics timing optimization
119184 07/28/06 10:08 gaskell Moller setup update
119183 07/28/06 09:45 horn Beamline survey
119182 07/28/06 09:08 Flores Target: Magnets offset
119181 07/28/06 08:22 gzero End of Run 30032:
119180 07/28/06 08:11 gzero Run 30032: lh2 production, 60uA, SMS=2650 A
119179 07/28/06 08:09 gzero End of Run 30031:
119178 07/28/06 08:06 jianglai Target: flywatter and radiator temperature not updating
119177 07/28/06 08:03 Larry Owl Shift summary
119176 07/28/06 08:02 cdaq Beam Time Accounting
119175 07/28/06 07:22 Larry Halo/Lumi/Paddle versus beam y-position
119174 07/28/06 07:13 Larry, Jiang CODA stuck, restart
119173 07/28/06 07:13 gzero Run 30031: lh2 production, 60uA, SMS=2650 A
119172 07/28/06 07:07 gzero Run 30030: lh2 production, 60uA, SMS=2650 A
119171 07/28/06 07:03 Larry Moved beam y-position
119170 07/28/06 06:45 jianglai BPM screen capture
119169 07/28/06 06:44 gzero End of Run 30029:
119168 07/28/06 06:35 Larry Halo rates slightly lower than recent values
119167 07/28/06 05:47 gzero Run 30029: lh2 production, 60uA, SMS=2650 A
119166 07/28/06 05:46 Larry Beam back on
119165 07/28/06 05:25 Larry Beam getting unstable
119164 07/28/06 05:21 gzero End of Run 30028:
119163 07/28/06 04:35 gzero Run 30028: lh2 production, 60uA, SMS=2650 A (PS4 back to 2000)
119162 07/28/06 04:33 Larry Frequent beam trips
119161 07/28/06 04:31 gzero End of Run 30027:
119160 07/28/06 04:02 gzero Run 30027: lh2 production, 60uA, SMS=2650 A (PS4=1500)
119159 07/28/06 03:58 gzero End of Run 30026:
119158 07/28/06 03:31 gzero Run 30026: lh2 production, 60uA, SMS=2650 A (PS4=1000)
119157 07/28/06 03:29 gzero End of Run 30025:
119156 07/28/06 02:56 Larry Momentary Beam off
119155 07/28/06 02:33 jianglai/lar new HV trip alarm on cdaql5 and the howto
119154 07/28/06 02:30 gzero Run 30025: lh2 production, 60uA, SMS=2650 A
119153 07/28/06 02:28 Larry Beam back on
119152 07/28/06 02:26 Larry Beam off
119151 07/28/06 02:23 gzero End of Run 30024:
119150 07/28/06 02:18 gzero Run 30024: lh2 production, 60uA, SMS=2650 A
119149 07/28/06 02:13 gzero End of Run 30023:
119148 07/28/06 01:55 Larry, Jingl Parity Quality Screen Capture from realtime monitor
119147 07/28/06 01:19 Larry Hall A will not be doing BCM calibration after all
119146 07/28/06 01:14 gzero Run 30023: lh2 production, 60uA, SMS=2650 A
119145 07/28/06 01:11 gzero End of Run 30022:
119144 07/28/06 00:57 jianglai fixing "feedback log" button on analysis_minder GUI
119143 07/28/06 00:16 real Swing Shift Summary
119142 07/28/06 00:15 cdaq Beam Time Accounting
119141 07/28/06 00:13 Breuer NA phototube/base needs changing: Oct 7 FPD Left random gain changes
119140 07/28/06 00:12 gzero Run 30022: lh2 production, 60uA
119139 07/28/06 00:08 gzero End of Run 30021:
Thursday
119138 07/27/06 23:54 gzero Run 30021: threshold scan of cerenkov with beam
119137 07/27/06 23:51 gzero End of Run 30020:
119136 07/27/06 23:06 real Cerenkov Trigger Rates and random contribution, LH2 target
119135 07/27/06 22:51 gzero Run 30020: lh2 production, 60uA
119134 07/27/06 22:49 gzero End of Run 30019:
119133 07/27/06 22:11 horn SOS Cerenkov test during run 30016
119132 07/27/06 21:41 horn Analysis: ARS timing and calibration (NA octants)
119131 07/27/06 21:39 gzero Run 30019: lh2 production, 60uA
119130 07/27/06 21:38 gzero End of Run 30018:
119129 07/27/06 20:36 gzero Run 30018: lh2 production, 60uA
119128 07/27/06 20:35 gzero End of Run 30017:
119127 07/27/06 20:29 Breuer High rates on NA multi hit scalers?
119126 07/27/06 19:36 gzero Run 30017: lh2 production, 60uA
119125 07/27/06 19:34 gzero End of Run 30016:
119124 07/27/06 18:38 jschaub Analysis: Amplitude Increase of the 1Hz Beam Current Structure
119123 07/27/06 18:27 gzero Run 30016: lh2 production, 60uA
119122 07/27/06 18:25 gzero End of Run 30015:
119121 07/27/06 18:07 Maud GainMatching on Octant 7
119120 07/27/06 17:52 real/Breuer NA ARS timing.
119119 07/27/06 17:48 muether Inelastic signal?
119118 07/27/06 17:30 gzero Run 30015: lh2 production, 60uA
119117 07/27/06 17:27 gzero End of Run 30014:
119116 07/27/06 16:48 suleiman Beam: Coil Modulation plot from the production run 30013
119115 07/27/06 16:17 gzero Run 30014: lh2 production, 60uA
119114 07/27/06 16:16 gzero End of Run 30013:
119113 07/27/06 16:08 Fatiha The coincidence matrix for the pattern ( for Mat )
119112 07/27/06 16:01 Spayde Day Shift Summary
119111 07/27/06 16:00 cdaq Beam Time Accounting
119110 07/27/06 15:32 gzero Run 30013: lh2 production, 60uA, coil pulsing on
119109 07/27/06 15:31 gzero End of Run 30012:
119108 07/27/06 14:37 muether Analysis: Some more on field scan
119107 07/27/06 14:33 Spayde Insertable Half Wave Plate is now OUT
119106 07/27/06 14:29 gzero Run 30012: lh2 production, 60uA, coil pulsing on
119105 07/27/06 14:27 gzero End of Run 30011:
119104 07/27/06 14:09 suleiman Beam: Lowered the limit on few Position Coinls and the Energy
119103 07/27/06 13:57 gzero Run 30011: lh2 production, 60uA, coil pulsing on
119102 07/27/06 13:22 suleiman Beam: Lowered the limit on the energy modulation
119101 07/27/06 12:56 suleiman Beam: For Coil Modulation to work: MCC must have "MODULATION ON"
119100 07/27/06 12:55 suleiman Beam: For Coil Modulation to work: MCC must have "MODULATION ON"
119099 07/27/06 12:45 suleiman Beam: Coil Modulation is now started by CODA at the begining of each run - both Position & Energy
119098 07/27/06 12:43 suleiman Beam: Coil Modulation is now started by CODA at the begining of each run - both Position & Energy
119097 07/27/06 12:35 Spayde Turning Detector HVs On
119096 07/27/06 12:34 gzero End of Run 30010:
119095 07/27/06 12:31 gzero Run 30010: Coil Modulation Test - 5 uA - Now both pos+energy Enabled in coda
119094 07/27/06 12:28 gzero End of Run 30009:
119093 07/27/06 12:16 Fatiha Changed the cuts for the Coil modulation to be 60 Hz/uA
119092 07/27/06 12:11 gzero Run 30009: Coil Modulation Test - 5 uA
119091 07/27/06 12:09 Spayde Detectors HVs Off
119090 07/27/06 11:59 muether Is cdaql1 frozen.
119089 07/27/06 11:58 gzero End of Run 30008:
119088 07/27/06 11:57 Spayde SMS: A Lead Water Temperature Low Alarm
119087 07/27/06 11:30 saw Beam: Added Fastfeedback to EPICS logging
119086 07/27/06 10:52 gzero Run 30008: lh2 production, 60uA
119085 07/27/06 10:50 gzero End of Run 30007:
119084 07/27/06 10:49 Spayde Analysis: Current Fluctuations from Run 29933
119083 07/27/06 10:06 Spayde Analysis: Current Fluctuations in Run 30006
119082 07/27/06 09:48 gzero Run 30007: lh2 production, 60uA
119081 07/27/06 09:46 gzero End of Run 30006:
119080 07/27/06 09:41 gzero Run 30006: lh2 production, 60uA, questionable halo 3 and 4
119079 07/27/06 09:25 Spayde HV Trip
119078 07/27/06 09:09 jschaub Analysis: Space cleared on the DAQ disks
119077 07/27/06 09:00 gzero End of Run 30005:
119076 07/27/06 09:00 Spayde Changing CODA Configuration to ts_Fullinj
119075 07/27/06 08:51 gzero Run 30005: DAQ Test of ts_fullinj
119074 07/27/06 08:26 gzero End of Run 30004:
119073 07/27/06 08:21 swells More evidence for 1 Hz beam current fluctuations
119072 07/27/06 08:12 Spayde SMS: EPICS Archiver Down?
119071 07/27/06 08:08 Larry Owl Shift Summary
119070 07/27/06 08:04 cdaq Beam Time Accounting
119069 07/27/06 07:42 gzero Run 30004: Production run, LH2, 60uA, SMS 2650 A
119068 07/27/06 07:42 Larry, Jingl Detector HV sniped
119067 07/27/06 07:40 gzero End of Run 30003:
119066 07/27/06 07:11 gzero Run 30003: Production run, LH2, 60uA, SMS 2650 A
119065 07/27/06 07:07 gzero End of Run 30002:
119064 07/27/06 06:59 Larry Frequent beam trips
119063 07/27/06 06:46 Larry NA Cerenkov PMT anode currents at 60uA on LH2 tgt
119062 07/27/06 06:15 gzero Run 30002: Production run, LH2, 60uA, SMS 2650 A
119061 07/27/06 06:13 gzero End of Run 30001:
119060 07/27/06 05:21 jianglai comparison of BCM and stripline BPM "4-wire-sum"
119059 07/27/06 05:14 gzero Run 30001: Production run, LH2, 60uA, SMS 2650 A
119058 07/27/06 05:12 gzero End of Run 30000:
119057 07/27/06 04:47 jianglai Analysis: updated the analysis DB with a new set of beam monitor calibrations including injector monitors
119056 07/27/06 04:14 gzero Run 30000: Production run, LH2, 60uA, SMS 2650 A
119055 07/27/06 04:13 Larry Beam back on
119054 07/27/06 04:07 jianglai Analysis: lumi/main detector comparison for lumi scan
119053 07/27/06 04:06 Larry Beam off for about 5 minutes
119052 07/27/06 04:05 gzero End of Run 29999:
119051 07/27/06 03:53 gzero Run 29999: Production run, LH2, 60uA, SMS 2650 A
119050 07/27/06 03:52 gzero End of Run 29998:
119049 07/27/06 02:53 gzero Run 29998: Production run, LH2, 60uA, SMS 2650 A
119048 07/27/06 02:52 gzero End of Run 29997:
119047 07/27/06 01:53 gzero Run 29997: Production run, LH2, 60uA, SMS 2650 A
119046 07/27/06 01:51 gzero End of Run 29996:
119045 07/27/06 01:50 gzero Run 29996: Production run, LH2, 60uA, SMS 2650 A
119044 07/27/06 01:47 gzero End of Run 29995:
119043 07/27/06 01:44 gzero Run 29995: Production run, LH2, 60uA, SMS 2650 A
119042 07/27/06 01:17 jianglai MCC turned fast feedback off
119041 07/27/06 01:14 jianglai Target: late entry: target moved to LH2 at 0:20
119040 07/27/06 01:12 gzero End of Run 29994:
119039 07/27/06 00:34 gzero Run 29994: Gain-matching Octant-7, 5uA, LH2
119038 07/27/06 00:14 gzero End of Run 29993:
119037 07/27/06 00:13 real Swing Shift Summary
119036 07/27/06 00:12 suleiman | M Beam: G0 BPM Cavity Commissioning
119035 07/27/06 00:07 cdaq Beam Time Accounting
Wednesday
119034 07/26/06 23:54 gzero Run 29993: CAV1 and CAV2 Commissioning - I
119033 07/26/06 23:52 gzero End of Run 29992:
119032 07/26/06 23:45 gzero Run 29992: CAV1 (Upstream) Commissioning - X & Y, 10 uA
119031 07/26/06 23:44 gzero End of Run 29991:
119030 07/26/06 23:34 gzero Run 29991: CAV2 (Downstream) Commissioning - X & Y, 10 uA
119029 07/26/06 23:25 gzero End of Run 29990:
119028 07/26/06 23:09 gzero Run 29990: test run for cavity commissioning
119027 07/26/06 23:06 fatiha/spayd beam current fluctuation fails "good event cut"
119026 07/26/06 22:00 real Difference of cerenkov efficiency NA VS FR
119025 07/26/06 21:58 real/Maud List of bad HV value since yesterday run #29951 to today run #29989
119024 07/26/06 21:29 Fatiha Reseted cdaql6
119023 07/26/06 20:43 Maud.JSR WARNING:wrong cerenkov HV values
119022 07/26/06 20:35 gzero End of Run 29989:
119021 07/26/06 19:58 gzero Run 29989: lh2 production, 60uA, PS4=max, feedback test
119020 07/26/06 19:56 gzero End of Run 29988:
119019 07/26/06 19:48 swells Overnight Run Plan (Wednesday-Thursday)
119018 07/26/06 19:48 suleiman Beam: I swapped the two cables C20AXP with C20AXM - This is a temprorary fix
119017 07/26/06 19:28 real position Feedback off
119016 07/26/06 19:10 gzero Run 29988: lh2 production, 60uA
119015 07/26/06 19:04 gzero End of Run 29987:
119014 07/26/06 17:59 gzero Run 29987: lh2 production, 60uA
119013 07/26/06 17:55 gzero End of Run 29986:
119012 07/26/06 17:31 jschaub Analysis: Analysis shift Daily System Maintenance instructions
119011 07/26/06 17:20 gzero Run 29986: lh2 production, 60uA SMS at 2650 A, fast clear disabled, PS4=6000
119010 07/26/06 17:19 gzero End of Run 29985:
119009 07/26/06 16:41 Spayde Day Shift Summary
119008 07/26/06 16:27 Spayde Target: Mystery of the Rebooting IOC Solved?
119007 07/26/06 16:09 cdaq Beam Time Accounting
119006 07/26/06 15:58 gzero Run 29985: lh2 production, 60uA SMS at 2650 A, fast clear disabled, PS4=2500
119005 07/26/06 15:57 gzero End of Run 29984:
119004 07/26/06 15:52 gzero Run 29984: lh2 production, 60uA SMS at 2650 A, fast clear disabled, PS4=6000
119003 07/26/06 15:51 gzero End of Run 29983:
119002 07/26/06 15:48 gzero Run 29983: lh2 production, 60uA SMS at 2650 A, fast clear disabled, PS4=2500
119001 07/26/06 15:46 gzero End of Run 29982:
119000 07/26/06 15:04 gzero Run 29982: lh2 production, 60uA SMS at 2650 A, PS4=max
118999 07/26/06 15:02 gzero End of Run 29981:
118998 07/26/06 14:17 gzero Run 29981: lh2 production, 60uA SMS at 2650 A
118997 07/26/06 14:00 Fatiha Beam cuts effects on the analyser.
118996 07/26/06 13:55 Alex Analysis: good and bad runs
118995 07/26/06 13:55 Alex Analysis: good and bad runs
118994 07/26/06 13:54 Maud New gainmatching for changed CEDs and FPDs
118992 07/26/06 13:07 Flores Beam: Back up beam
118991 07/26/06 13:05 Spayde Normalized Halo Restored
118990 07/26/06 13:01 Spayde Target: More IOC Craziness
118989 07/26/06 12:44 gzero End of Run 29980:
118988 07/26/06 12:44 Spayde Perfect Halo! (Not Quite.)
118987 07/26/06 12:42 gzero Run 29980: lh2 production, 10uA SMS at 2650 A
118986 07/26/06 10:44 swells RC Report for Monday-Wednesday
118985 07/26/06 10:35 Spayde Target: Target IOC Reboot
118984 07/26/06 10:17 gzero End of Run 29979:
118983 07/26/06 09:17 gzero Run 29979: lh2 production, 60uA SMS at 2650 A
118982 07/26/06 09:16 gzero End of Run 29978:
118981 07/26/06 08:22 cdaq Beam Time Accounting
118980 07/26/06 08:15 gzero Run 29978: lh2 production, 60uA SMS at 2650 A
118979 07/26/06 08:14 gzero End of Run 29977:
118978 07/26/06 08:13 jianglai/spa Analysis: modified cut file for default analyzer
118977 07/26/06 07:55 jianglai owl shift summary
118976 07/26/06 07:07 gzero Run 29977: lh2 production, 60uA SMS at 2650 A
118975 07/26/06 07:05 gzero End of Run 29976:
118974 07/26/06 06:38 jianglai Analysis: Lumi yield and asymmetry width vs beam current
118973 07/26/06 06:07 gzero Run 29976: lh2 production, 60uA SMS at 2650 A
118972 07/26/06 04:43 jianglai injector trouble
118971 07/26/06 04:04 jianglai beam off for 15 minutes. hall A BCM calibration.
118970 07/26/06 03:59 gzero End of Run 29975:
118969 07/26/06 03:04 jianglai disable fastclear in the DAQ, set ps4=6000
118968 07/26/06 02:50 gzero Run 29975: lh2 production, 60uA SMS at 2650 A
118967 07/26/06 02:49 gzero End of Run 29974:
118966 07/26/06 02:48 gzero Run 29974: lh2 production, 60uA SMS at 2650 A
118965 07/26/06 02:45 gzero End of Run 29973:
118964 07/26/06 02:31 gzero Run 29973: lh2 production, 60uA SMS at 2650 A
118963 07/26/06 02:30 gzero End of Run 29972:
118962 07/26/06 02:25 gzero Run 29972: lh2 @ 60uA SMS at 2650 A
118961 07/26/06 02:24 gzero End of Run 29971:
118960 07/26/06 02:17 gzero Run 29971: lh2 @ 50uA SMS at 2650 A
118959 07/26/06 02:15 gzero Run 29970: lh2 @ 50uA SMS at 2650 A
118958 07/26/06 02:12 gzero Run 29969: lh2 @ 50uA SMS at 2650 A
118957 07/26/06 02:10 gzero End of Run 29968:
118956 07/26/06 02:06 gzero Run 29968: lh2 @ 40uA SMS at 2650 A
118955 07/26/06 02:05 gzero End of Run 29967:
118954 07/26/06 02:00 gzero Run 29967: lh2 @ 30uA SMS at 2650 A
118953 07/26/06 01:58 gzero End of Run 29966:
118952 07/26/06 01:52 gzero Run 29966: lh2 @ 20uA SMS at 2650 A
118951 07/26/06 01:51 gzero End of Run 29965:
118950 07/26/06 01:49 hood Target: beam moved to hydrogen adn 60ua prep
118949 07/26/06 01:44 gzero Run 29965: lh2 @ 10uA SMS at 2650 A
118948 07/26/06 01:25 gzero End of Run 29964:
118947 07/26/06 01:21 gzero Run 29964: c12 @ 60 uA SMS at 2650 A
118946 07/26/06 01:20 gzero End of Run 29963:
118945 07/26/06 01:12 gzero Run 29963: c12 @ 50 uA SMS at 2650 A
118944 07/26/06 01:10 gzero End of Run 29962:
118943 07/26/06 01:01 gzero Run 29962: c12 @ 40 uA SMS at 2650 A
118942 07/26/06 01:00 gzero End of Run 29961:
118941 07/26/06 00:50 gzero Run 29961: c12 @ 30 uA SMS at 2650 A
118940 07/26/06 00:49 gzero End of Run 29960:
118939 07/26/06 00:41 gzero Run 29960: c12 @ 20 uA SMS at 2650 A
118938 07/26/06 00:40 gzero End of Run 29959:
118937 07/26/06 00:34 gzero Run 29959: c12 @ 10 uA SMS at 2650 A
118936 07/26/06 00:28 gzero End of Run 29958:
118935 07/26/06 00:06 real Swing Shift Summary
118934 07/26/06 00:05 Breuer/Wells Roc 4 Swapped scalers to repair bad channel, with nasty phantom followup problem.
118933 07/26/06 00:04 cdaq Beam Time Accounting
Tuesday
118932 07/25/06 23:42 real NA electronic problem WAS NOT A PROBLEM OF ELECTRONIC but a g0realtime prob
118931 07/25/06 23:37 gzero Run 29958: c12 @ 60uA SMS at 2650 A
118930 07/25/06 23:33 gzero End of Run 29957:
118929 07/25/06 23:16 gzero Run 29957: electronics test, junk
118928 07/25/06 22:56 gzero End of Run 29956:
118927 07/25/06 22:46 real Pb with Na electronics from roc4
118926 07/25/06 22:42 jschaub Analysis: empty integrity files
118925 07/25/06 21:28 jianglai beam monitor calibration filled into DB.
118924 07/25/06 21:27 jianglai beam monitor calibration filled into DB.
118923 07/25/06 21:21 gzero Run 29956: c12 @ 60uA SMS at 2650 A
118922 07/25/06 21:18 gzero End of Run 29955:
118921 07/25/06 20:36 gzero Run 29955: c12 @ 60uA SMS at 2650 A
118920 07/25/06 20:35 gzero End of Run 29954:
118919 07/25/06 20:32 real run 29951-29954 are good data for French Octant but not for NA ones
118918 07/25/06 20:26 gzero Run 29954: c12 @ 60uA SMS at 2650 A
118917 07/25/06 20:22 gzero End of Run 29953:
118916 07/25/06 20:17 gzero Run 29953: daq test
118915 07/25/06 20:15 gzero End of Run 29952:
118914 07/25/06 20:14 jianglai Double-checking Herbert's PMT results. Found x10 error in 2" tubes
118913 07/25/06 20:13 gzero Run 29952: c12 @ 60uA SMS at 2650 A
118912 07/25/06 20:12 gzero End of Run 29951:
118911 07/25/06 20:10 gzero Run 29951: LH2 @ 58 uA , SMS at 2650
118910 07/25/06 19:59 real Gain back to auto
118909 07/25/06 19:53 gzero End of Run 29950:
118908 07/25/06 19:39 real X Y gain value for BCM/BPM calibration
118907 07/25/06 18:31 Alex/Goulven Analysis: BPO Scan results - NA octant
118906 07/25/06 17:28 gzero Run 29950: 60uA BCM/BPM calibration
118905 07/25/06 17:19 Toplosky Target: Changed to Carbon. Lowered HP Heater to ~200W
118904 07/25/06 17:07 real change to carbon data, to do BCM calibration
118903 07/25/06 16:47 gzero End of Run 29949:
118902 07/25/06 16:40 gzero Run 29949: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 6ns oct 7
118901 07/25/06 16:39 gzero End of Run 29948:
118900 07/25/06 16:34 gzero Run 29948: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 5ns oct 7
118899 07/25/06 16:31 real beam is back to 60uA, good halo, but not completly stable.
118898 07/25/06 16:21 gzero End of Run 29947:
118897 07/25/06 16:02 cdaq Beam Time Accounting
118896 07/25/06 16:01 Spayde Day Shift Summary
118895 07/25/06 15:12 gzero Run 29947: lh2, fastbus run, gain matching for fpds
118894 07/25/06 14:59 gzero End of Run 29946:
118893 07/25/06 14:46 gzero Run 29946: lh2, fastbus run, gain matching for ceds
118892 07/25/06 14:08 Spayde Detector HV is Off
118891 07/25/06 14:05 gzero End of Run 29945:
118890 07/25/06 13:52
118889 07/25/06 13:49 gzero Run 29945: LH2 @ 60uA SMS at 2650 A
118888 07/25/06 13:40 gzero End of Run 29944:
118887 07/25/06 13:30 Fatiha Comparison between single rates from FastBus and Scalers analysis
118886 07/25/06 13:29 gzero Run 29944: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 4ns, octant 7 same as others
118885 07/25/06 13:26 gzero End of Run 29943:
118884 07/25/06 13:21 gzero Run 29943: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 10ns
118883 07/25/06 13:17 gzero End of Run 29942:
118882 07/25/06 13:05 gzero Run 29942: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 9ns
118881 07/25/06 13:03 gzero End of Run 29941:
118880 07/25/06 12:58 gzero Run 29941: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 8ns
118879 07/25/06 12:54 gzero End of Run 29940:
118878 07/25/06 12:47 gzero Run 29940: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 7ns
118877 07/25/06 12:44 gzero End of Run 29939:
118876 07/25/06 12:40 gzero Run 29939: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 6ns
118875 07/25/06 12:37 gzero End of Run 29938:
118874 07/25/06 12:23 Fatiha, Alex
118873 07/25/06 12:19 Bosted Rates in Test PMTs
118872 07/25/06 12:17 gzero Run 29938: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 6ns
118871 07/25/06 12:15 gzero End of Run 29937:
118870 07/25/06 12:08 gzero Run 29937: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 6ns
118869 07/25/06 12:05 gzero End of Run 29936:
118868 07/25/06 11:51 gzero Run 29936: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 5ns
118867 07/25/06 11:47 gzero End of Run 29935:
118866 07/25/06 11:32 Larry, S.Wel Timing for NA Cerenkov tweaked
118865 07/25/06 11:31 gzero Run 29935: LH2 @ 60uA SMS at 2650 A, NA Electronics, BPO 4ns
118864 07/25/06 11:29 gzero End of Run 29934:
118863 07/25/06 11:25 Fatiha Do not run or kill the analyser in the cdaq machines without asking who is working
118862 07/25/06 10:52 gzero Run 29934: LH2 @ 60uA SMS at 2650 A
118861 07/25/06 10:50 gzero End of Run 29933:
118860 07/25/06 09:58 Bosted LH2 Target in
118859 07/25/06 09:50 gzero Run 29933: LH2 @ 60uA SMS at 2650 A
118858 07/25/06 09:43 Spayde SMS: Ramping Magnet to 2650 A
118857 07/25/06 09:30 Bosted Put in LH2 target
118856 07/25/06 09:14 gzero End of Run 29932:
118855 07/25/06 08:45 jianglai Herbert's test PMT rates at 56 uA
118854 07/25/06 08:44 gzero Run 29932: C, 60 uA, test DAQ run, ps4=600, fast clear disabled
118853 07/25/06 08:42 gzero End of Run 29931:
118852 07/25/06 08:37 Bosted Target: opening JT valve
118851 07/25/06 08:35 gzero Run 29931: C, 60 uA, test DAQ run, ps4=max, fast clear disabled
118850 07/25/06 08:33 gzero End of Run 29930:
118849 07/25/06 08:14 gzero Run 29930: C, 60 uA, test DAQ run, ps4=max
118848 07/25/06 08:12 gzero End of Run 29929:
118847 07/25/06 08:10 gzero Run 29929: C, 60 uA, test DAQ run, ps4=800
118846 07/25/06 08:09 cdaq Beam Time Accounting
118845 07/25/06 08:08 gzero End of Run 29928:
118844 07/25/06 08:03 gzero Run 29928: C, 60 uA, test DAQ run
118843 07/25/06 08:01 jianglai owl shift summary
118842 07/25/06 07:35 jianglai almost there!
118841 07/25/06 06:41 jianglai beam status
118840 07/25/06 05:55 jianglai Quad scan done. CW beam expected in hall c
118839 07/25/06 04:56 jianglai beam status
118838 07/25/06 04:03 jianglai How to bring up beam on/off audio alert program
118837 07/25/06 03:33 jianglai beam halo improved after beam spot tightening
118836 07/25/06 03:01 HOOD Target: target moved to carbon
118835 07/25/06 02:50 jianglai difficulty in optics
118834 07/25/06 02:13 jianglai MCC is trying higher beam current
118833 07/25/06 00:46 jianglai shift plan
118832 07/25/06 00:23 cdaq Beam Time Accounting
118831 07/25/06 00:07 real Swing Shift Summary
118830 07/25/06 00:04 jianglai Montecello problem, and recovery
Monday
118829 07/24/06 23:49 gzero End of Run 29927:
118828 07/24/06 23:07 gzero Run 29927: junk after cdaql3 reboot
118827 07/24/06 23:07 real/liu cdaql3/cdaql5 was frozen. Hard reboot was necessary
118826 07/24/06 21:27 Larry Added delay to NA Cerenkov Mult-2 trigger
118825 07/24/06 20:23 real MCC ask for target out, some CW low current in the hall
118824 07/24/06 20:14 swells Optimum SMS setting
118823 07/24/06 20:10 swells Run Plan for Swing/Owl/Day Monday-Tuesday (with better format)
118822 07/24/06 20:10 swells Run Plan for Swing/Owl/Day Monday-Tuesday
118821 07/24/06 19:04 Breuer shielding changes for test detectors near paddle; borated polyethylene
118820 07/24/06 18:29 muether Analysis: SMS Field Scan results (with plots)
118819 07/24/06 18:28 muether Analysis: SMS Field Scan results
118818 07/24/06 18:21 breuer borated poly "hut" around 5" test tube
118817 07/24/06 18:18
118816 07/24/06 18:06 Larry, Alex Changed NA Cerenkov trigger to Mult-2 only
118815 07/24/06 17:59 real sweep was done around 17h00
118814 07/24/06 17:56
118813 07/24/06 17:53
118812 07/24/06 17:53
118811 07/24/06 16:39 B. Quinn Day shift summary
118810 07/24/06 16:32 Breuer replaced base for octant 1 FPD 06 Right
118809 07/24/06 16:10 cdaq Beam Time Accounting
118808 07/24/06 15:47 Spayde SMS: Ramping Magnet to 2400 A
118807 07/24/06 15:36 real FR PMT/basis cahnge DONE
118806 07/24/06 13:30 suleiman Beam: A broken connection was found for C20AXP (not C20XM)
118805 07/24/06 13:12 gzero End of Run 29926:
118804 07/24/06 13:11 gzero Run 29926: C20A test with oscillator
118803 07/24/06 13:08 swells RC Summary for Weekend
118802 07/24/06 12:13 B. Quinn Beam: Vacuum status/Hall activities
118801 07/24/06 12:08 Spayde Target: Shift Checklist and He Gas Bottle Question
118800 07/24/06 11:36 real Work to be done in the hall. French octant basis/PMT changes.
118799 07/24/06 11:02 suleiman | Beam: C20AXM signal
118798 07/24/06 10:56 suleiman Beam: G0 and G0B tested with the Oscillator ON and they are now fine
118797 07/24/06 09:51 gzero End of Run 29925:
118796 07/24/06 09:38 gzero Run 29925: C20A, G0, G0B test with oscillator
118795 07/24/06 08:32 Spayde SMS: Ramping Magnet Down to 0 A
118794 07/24/06 08:03 jianglai owl shift summary
118793 07/24/06 07:38 jianglai IOCSE14/16/18/20 back to autogain
118792 07/24/06 06:48 gzero End of Run 29924:
118791 07/24/06 06:02 jianglai linac vacuum updates
118790 07/24/06 05:36 gzero Run 29924: pedestal run
118789 07/24/06 05:36 gzero End of Run 29923:
118788 07/24/06 04:31 gzero Run 29923: pedestal run
118787 07/24/06 04:28 gzero End of Run 29922:
118786 07/24/06 03:23 jianglai Set IOCSE14/17/18/20 to forced gain to do pedestal measurement.
118785 07/24/06 03:19 gzero Run 29922: pedestal run
118784 07/24/06 01:17 gzero End of Run 29921:
118783 07/24/06 01:12 gzero Run 29921: junk
118782 07/24/06 01:04 gzero End of Run 29920:
118781 07/24/06 01:03 gzero Run 29920: junk
118780 07/24/06 00:56 gzero End of Run 29919:
118779 07/24/06 00:55 gzero Run 29919: junk
118778 07/24/06 00:49 gzero End of Run 29918:
118777 07/24/06 00:47 gzero Run 29918: junk
118776 07/24/06 00:44 gzero End of Run 29917:
118775 07/24/06 00:44 gzero Run 29917: junk
118774 07/24/06 00:36 gzero End of Run 29916:
118773 07/24/06 00:29 gzero Run 29916: junk
118772 07/24/06 00:24 jianglai shift plan
Sunday
118771 07/23/06 23:58 cdaq Beam Time Accounting
118770 07/23/06 23:43 gzero End of Run 29915:
118769 07/23/06 23:30 Maud,JSR Fr HV corrections
118768 07/23/06 23:26 gzero Run 29915: Cerenkov threshold scan
118767 07/23/06 23:05 gzero End of Run 29914:
118766 07/23/06 22:50 Breuer manual HV changes.
118765 07/23/06 22:43 gzero Run 29914: Cerenkov threshold scan
118764 07/23/06 20:38 real update on beam info
118763 07/23/06 20:30 jianglai Analysis: update and recompile default analyzer on cdaql*
118762 07/23/06 20:11 Breuer Shielding changes to 5" and 2" test detectors near paddle detector
118761 07/23/06 20:06 real beam summary
118760 07/23/06 18:45 suleiman | s Beam: Changed G0 and G0B output from the Sample and Hold (S/H) cards from -ve to +ve
118759 07/23/06 18:20 swells Run Plan for Swing/Owl Sunday/Monday
118758 07/23/06 17:19 Maud Detailed gain matching overview
118757 07/23/06 17:15 Maud Gain Matching Overview
118756 07/23/06 17:07 gaskell Moller commissioning summarry
118755 07/23/06 16:56 gaskell Moller backout
118754 07/23/06 16:54 Spayde SMS: Pager Number Changed
118753 07/23/06 16:17 cdaq Beam Time Accounting
118752 07/23/06 16:13 B. Quinn Day Shift Summary
118751 07/23/06 15:17 cdaq Moller Run 61670: Moller checkout
118750 07/23/06 15:13 cdaq Moller Run 61669: Moller checkout
118749 07/23/06 14:05 cdaq Moller Run 61668: Moller checkout
118748 07/23/06 13:45 Fatiha Cleaned $G0SCRATCH/scripts/ directory
118747 07/23/06 13:39 cdaq Moller Run 61667: Moller checkout
118746 07/23/06 12:53 cdaq Moller Run 61666: Moller checkout
118745 07/23/06 12:47 cdaq Moller Run 61665: Moller checkout
118744 07/23/06 12:47 hood Target: HPH decreased to 200 W
118743 07/23/06 12:43 cdaq Moller Run 61664: Moller checkout
118742 07/23/06 12:41 cdaq Moller Run 61663: Moller checkout
118741 07/23/06 12:33 cdaq Moller Run 61662: Moller checkout
118740 07/23/06 11:41 swells NA concidence modules swapped
118739 07/23/06 11:33 real No hardware problem on MT in g0online. Just visualization does not begin from 0.
118738 07/23/06 09:32 gaskell Setup for Moller
118737 07/23/06 08:19 Larry Owl Shift summary
118736 07/23/06 08:14 cdaq Beam Time Accounting
118735 07/23/06 08:01 Larry Detector HVs turned off, Beam given back to MCC
118734 07/23/06 07:42 Larry NA Cerenkov HVs back in high-gain mode
118733 07/23/06 07:37 gzero End of Run 29913:
118731 07/23/06 07:36 jianglai/lar MT TDC cross-talk?
118730 07/23/06 06:58 gzero Run 29913: Electronics test, junk run
118729 07/23/06 06:39 gzero End of Run 29912:
118728 07/23/06 06:36 Larry, Herbe NA Cerenkov PMT anode currents
118727 07/23/06 05:51 Larry Snapshot of Coincidence matrices at 2400A and C target
118726 07/23/06 05:35 gzero Run 29912: C tgt @ 20uA SMS at 2400 A, NA Cerenkovs at Fullgain
118725 07/23/06 05:31 jianglai carbon target in
118724 07/23/06 05:15 gzero End of Run 29911:
118723 07/23/06 04:27 Larry Snapshot of Coincidence matrices at 2400A and LH2 target
118722 07/23/06 04:23 muether SMS: Changing SMS pager number
118721 07/23/06 04:15 gzero Run 29911: LH2 @ 20uA SMS at 2400 A, NA Cerenkovs at Fullgain
118720 07/23/06 04:10 gzero End of Run 29910:
118719 07/23/06 04:06 gzero Run 29910: LH2 @ 20uA SMS at 2400 A, NA Cerenkovs at Fullgain
118718 07/23/06 04:00 gzero End of Run 29909:
118717 07/23/06 03:57 gzero Run 29909: LH2 @ 20uA SMS at 2400 A, NA Cerenkovs at Fullgain
118716 07/23/06 03:53 gzero End of Run 29908:
118715 07/23/06 03:48 gzero Run 29908: junk to test realtime
118714 07/23/06 03:33 Larry Beam back on at 20uA
118713 07/23/06 03:14 Larry Beam off for 15 minutes
118712 07/23/06 03:11 jianglai SMS back to 2400 A
118711 07/23/06 03:07 Breuer shielding test tube rate results for borated sheet
118710 07/23/06 03:06 gzero End of Run 29907:
118709 07/23/06 02:56 Larry snapshot of Coincidence matrices at 2475 A
118708 07/23/06 02:51 gzero Run 29907: LH2 @ 20uA SMS at 2475 A
118707 07/23/06 02:50 jianglai SMS ramped to 2475 A
118706 07/23/06 02:48 gzero End of Run 29906:
118705 07/23/06 02:39 jianglai snapshot of matrices at 2325 A
118704 07/23/06 02:31 gzero Run 29906: LH2 @ 20uA SMS at 2325 A
118703 07/23/06 02:29 jianglai SMS: SMS ramped to 2325 A
118702 07/23/06 02:27 gzero End of Run 29905:
118701 07/23/06 02:20 Larry Screenshot of Coincidence matrices for SMS scan with field at I=2175 A
118700 07/23/06 02:13 gzero Run 29905: LH2 @ 20uA SMS at 2175 A
118699 07/23/06 02:10 jianglai/lar Beam: debugging of G0 and G0B
118698 07/23/06 01:53 Breuer change in shielding for neutron shielding test detectors
118697 07/23/06 01:23 Larry Beam-Loss monitor trips
118696 07/23/06 01:20 jianglai/fat Analysis: making local change on the default analyzer on cdaq machines
118695 07/23/06 01:08 gzero End of Run 29904:
118694 07/23/06 01:03 gzero Run 29904: junk
118693 07/23/06 00:59 jianglai SMS: magnet ramped to 2175 A
118692 07/23/06 00:50 gzero End of Run 29903:
118691 07/23/06 00:48 real Basis of FPD 15 octant 8 is dead. Need to be changed
118690 07/23/06 00:47 gzero Run 29903: junk for analyzer test
118689 07/23/06 00:46 Larry Controlled Access completed
118688 07/23/06 00:35 Fatiha Latches/Trigger Viewer
118687 07/23/06 00:33 Larry Controlled Access to recycle low voltage PS
118686 07/23/06 00:18 gzero End of Run 29902:
118685 07/23/06 00:18 cdaq Beam Time Accounting
118684 07/23/06 00:15 real Swing Shift Summary
118683 07/23/06 00:13 jianglai Target: Hall A will increase the coolant flow in the next 45 minutes
118682 07/23/06 00:09 Breuer/Maud Better plot: CEDs in octant 5, dynamic range problem CED 5
118681 07/23/06 00:03 Fatiha/Goulv Analysis: Changed G0Octant.C to get the correct Latches Histograms
Saturday
118680 07/22/06 23:35 real Coincidence matrices for sms scan at 2100A With the snapshot now
118679 07/22/06 23:34 real Coincidence matrices for sms scan at 2100A
118678 07/22/06 23:30 gzero Run 29902: LH2 @ 20uA SMS at 2100 A
118677 07/22/06 23:27 gzero End of Run 29901:
118676 07/22/06 22:59 jianglai LUMI "gain" matching
118675 07/22/06 22:52 gzero Run 29901: LH2 @ 20uA SMS at 2250 A, again, again...
118674 07/22/06 22:49 gzero End of Run 29900:
118673 07/22/06 22:40 real Coincidence matrices for sms scan at 2250A
118672 07/22/06 22:34 suleiman Beam: The raw signals for G0 and G0B seem to come and go
118671 07/22/06 22:31 gzero Run 29900: LH2 @ 20uA SMS at 2250 A
118670 07/22/06 22:30 real Beam tripped at 20 uA, make the HV tripped (each time)
118669 07/22/06 22:29 suleiman Beam: Hall C Charge feedback is ON
118668 07/22/06 22:27 gzero End of Run 29899:
118667 07/22/06 22:17 real HV tripped again. Beam is not stable at all at 20 uA
118666 07/22/06 22:15 gzero Run 29899: LH2 @ 20uA SMS at 2250 A
118665 07/22/06 22:14 gzero End of Run 29898:
118664 07/22/06 22:05 gzero Run 29898: LH2 @ 20uA SMS at 2250 A
118663 07/22/06 22:02 gzero End of Run 29897:
118662 07/22/06 21:52 suleiman Beam: C20XM signal is missing
118661 07/22/06 21:48 suleiman Beam: The raw signals of G0 and G0B are zeros in "beam_nt"
118660 07/22/06 21:38 real HV tripped
118659 07/22/06 21:32 gzero Run 29897: LH2 @ 20uA SMS at 2625 A
118658 07/22/06 21:31 gzero End of Run 29896:
118657 07/22/06 21:11 gzero Run 29896: LH2 @ 20uA SMS at 2625 A
118656 07/22/06 21:02 suleiman Beam: The part of the code that does Hall A charge feedback is enabled
118655 07/22/06 20:29 gzero End of Run 29895:
118654 07/22/06 20:25 gzero Run 29895: LH2 @ 20uA SMS at 2625 A
118653 07/22/06 20:24 gzero End of Run 29894:
118652 07/22/06 20:20 pking Analysis: Corrected an error in the latch histogramming for the gzero account
118651 07/22/06 20:19 gzero Run 29894: junk
118650 07/22/06 20:13 gzero End of Run 29893:
118649 07/22/06 20:02 pking Checked the 499 MHz and 31 MHz signals; looks fine
118648 07/22/06 19:53 gzero Run 29893: LH2 @ 20uA SMS at 2775 A
118647 07/22/06 19:26 gzero End of Run 29892:
118646 07/22/06 19:12 gzero Run 29892: Cerenkov threshold scan with no beam
118645 07/22/06 18:49 gzero End of Run 29891:
118644 07/22/06 18:15 gzero Run 29891: LH2 @ 20uA SMS at 2775 A
118643 07/22/06 18:11 gzero End of Run 29891:
118642 07/22/06 17:55 Breuer/Flore NA ADCs Oct 5, CEDs 5/6 bad resolution
118641 07/22/06 17:49 gzero Run 29891: LH2 @ 20uA SMS at 2775 A
118640 07/22/06 17:48 gzero End of Run 29889:
118639 07/22/06 17:40 Fatiha High Coicnidence pion rates in Octnats 5 and 7
118638 07/22/06 17:27 gzero Run 29889: LH2 @ 20uA SMS at 2925 A
118637 07/22/06 17:24 gzero End of Run 29888:
118636 07/22/06 17:09 gzero Run 29888: LH2 @ 20uA SMS at 3075 A
118635 07/22/06 17:06 gzero End of Run 29887:
118634 07/22/06 17:06 gzero Run 29887: LH2 @ 20uA
118633 07/22/06 16:54 gzero End of Run 29886:
118632 07/22/06 16:40 gzero Run 29886: Cerenkov threshold scan
118631 07/22/06 16:38 gzero End of Run 29885:
118630 07/22/06 16:25 cdaq Beam Time Accounting
118629 07/22/06 16:21 B. Quinn Day shift s summary..... trying again with the format....
118628 07/22/06 16:17 B. Quinn Day shift summary
118627 07/22/06 16:06 gzero Run 29885: LH2 @ 20uA
118626 07/22/06 16:03 gzero End of Run 29884:
118625 07/22/06 15:59 vanoers Target: Final comment about the day shift
118624 07/22/06 15:45 B. Quinn Coincidence matrices for SMS scan at 3150A
118623 07/22/06 15:43 gzero Run 29884: LH2 @ 20uA
118622 07/22/06 15:40 gzero End of Run 29883:
118621 07/22/06 15:35 B. Quinn Coincidence matrices for SMS scan at 3000A
118620 07/22/06 15:22 gzero Run 29883: LH2 @ 20uA
118619 07/22/06 15:19 gzero End of Run 29882:
118618 07/22/06 15:08 B. Quinn Coincidence matrices for SMS scan at 2850A
118617 07/22/06 15:01 gzero Run 29882: LH2 @ 20uA
118616 07/22/06 14:57 gzero End of Run 29881:
118615 07/22/06 14:49 muether SMS: Upate on water temp
118614 07/22/06 14:42 B. Quinn Coincidence matrices for SMS scan at 2700A
118613 07/22/06 14:38 muether SMS: LHe Oscillations stopped
118612 07/22/06 14:38 gzero Run 29881: LH2 @ 20uA
118611 07/22/06 14:35 gzero End of Run 29880:
118610 07/22/06 14:34 B. Quinn Coincidence matrices for sms scan at 2550A
118609 07/22/06 14:07 gzero End of Run 29880:
118608 07/22/06 14:06 gzero Run 29880: LH2 @ 20uA
118607 07/22/06 13:33 gzero Run 29879: LH2 @ 20uA
118606 07/22/06 13:31 gzero End of Run 29878:
118605 07/22/06 13:19 B. Quinn Meantimer TDC distribution
118604 07/22/06 12:48 Fatiha Single Rates Fo Oct2 and Oct3
118603 07/22/06 12:37 Fatiha Scalers Rate Analysis
118602 07/22/06 12:27 gzero Run 29878: LH2 @ 20uA
118601 07/22/06 12:24 gzero End of Run 29877:
118600 07/22/06 12:15 B. Quinn Beam time accounting problem fixed
118599 07/22/06 12:13 swells comments on coincidence matrix plots
118598 07/22/06 12:04 B. Quinn Coincidence matrices for LH2 (20 uA)
118597 07/22/06 12:01 B. Quinn 20 uA on LH2
118596 07/22/06 11:32 gzero Run 29877: junk
118595 07/22/06 11:31 gzero End of Run 29876:
118594 07/22/06 11:31 gzero Run 29876: junk
118593 07/22/06 11:28 gzero End of Run 29875:
118592 07/22/06 11:22 gzero Run 29875: Beam off (during target change)
118591 07/22/06 11:15 gzero End of Run 29874:
118590 07/22/06 11:14 B. Quinn More carbon running/changing to LH2
118589 07/22/06 11:09 gzero Run 29874: Carbon run, 20 uA
118588 07/22/06 11:07 gzero End of Run 29873:
118587 07/22/06 10:33 B. Quinn Electronics fixed, doing short Carbon run
118586 07/22/06 10:27 vanoers Target: Opening JT Valve
118585 07/22/06 10:27 gzero Run 29873: Carbon run, 20 uA
118584 07/22/06 10:25 gzero End of Run 29872:
118583 07/22/06 10:11 B. Quinn Taking data at 20uA on Carbon
118582 07/22/06 10:03 B. Quinn Beam time accounting problem returns
118581 07/22/06 10:02 swells more NA electronics
118580 07/22/06 09:41 gzero Run 29872: Carbon run, 20 uA
118579 07/22/06 09:31 swells beam status and day shift plan
118578 07/22/06 09:05 vanoers Target: TARGET MOVE
118577 07/22/06 08:26 Larry Owl Shift summary (again, reformatted)
118576 07/22/06 08:20 Larry Owl Shift Summary
118575 07/22/06 08:18 Larry OK, we're there. (maybe)
118574 07/22/06 08:01 cdaq Beam Time Accounting
118573 07/22/06 06:57 Larry Almost ready to go
118572 07/22/06 06:37 Larry Some progress on beam halo, almost there...
118571 07/22/06 05:40 Larry Status update from MCC
118570 07/22/06 03:44 Larry MCC Optics expert in to check beam-tune
118569 07/22/06 02:58 gzero End of Run 29871:
118568 07/22/06 02:56 Larry NA Cerenkov HV's set (temporarily) to half-gain mode
118567 07/22/06 02:46 Larry MCC problems with Halo
118566 07/22/06 02:14 gzero Run 29871: junk to test realtime
118565 07/22/06 02:09 Maud Target: Preview of Flow Rate for 60muA
118564 07/22/06 01:57 gzero End of Run 29870:
118563 07/22/06 01:42 gzero Run 29870: junk to test realtime
118562 07/22/06 01:23 Maud New HV file loaded
118561 07/22/06 00:27 real Swing Shift Summary
118560 07/22/06 00:06 cdaq Beam Time Accounting
Friday
118559 07/21/06 21:11 real MCC will do a harp scan, target out of beam, HV off on all detectors
118558 07/21/06 20:40 real Smoke alarm in sos hut.
118557 07/21/06 20:33 gzero End of Run 29869:
118556 07/21/06 19:56 real French electronics coincidence board changed for octant 2
118555 07/21/06 19:49 gzero Run 29869: junk to debug electronics
118554 07/21/06 19:36 gzero End of Run 29868:
118553 07/21/06 19:25 gzero Run 29868: junk to debug electronics
118552 07/21/06 19:15 swells NA electronics fixed
118551 07/21/06 18:59 Breuer Octant 5, FPD 3-10 MT problem resolved: ribbon cable partially disconnected
118550 07/21/06 18:54 breuer Specifics on NIM crate (in Hall) power problem, affecting octants 1 and 3
118549 07/21/06 18:52 gzero End of Run 29867:
118548 07/21/06 18:40 gzero Run 29867: junk to debug electronics
118547 07/21/06 18:39 gzero End of Run 29866:
118546 07/21/06 18:34 gzero Run 29866: junk to debug electronics
118545 07/21/06 18:33 breuer (No) light leak on 2" quartz photo tube
118544 07/21/06 18:33 gzero End of Run 29865:
118543 07/21/06 18:22 gzero Run 29865: junk to debug electronics
118542 07/21/06 18:13 gzero End of Run 29864:
118541 07/21/06 18:11 gzero Run 29864: junk to debug electronics
118540 07/21/06 18:10 gzero End of Run 29863:
118539 07/21/06 18:07 gzero Run 29863: junk to debug electronics
118538 07/21/06 16:07 Armstrong Day Shift Summary (aka litany of woes...)
118537 07/21/06 16:02 cdaq Beam Time Accounting
118536 07/21/06 15:44 muether SMS: Lhe Low alarm
118535 07/21/06 15:23 swells RC Report for Thursday/Friday July 20, 21
118534 07/21/06 14:57 gzero End of Run 29862:
118533 07/21/06 14:25 gzero Run 29862: ROC8 crosstalks (events # set to 25000)
118532 07/21/06 14:24 gzero End of Run 29861:
118531 07/21/06 14:21 gzero Run 29861: ROC8 crosstalks
118530 07/21/06 11:51 Armstrong beam tuning status report
118529 07/21/06 11:08 gzero End of Run 29860:
118528 07/21/06 11:08 gzero Run 29860: junk
118527 07/21/06 10:55 pking Modified the "run_fill_start" and "run_fill_end" scripts
118526 07/21/06 10:54 muether SMS: Level High Alarms
118525 07/21/06 10:50 muether SMS: Replaced Thermocouple on Lead B
118524 07/21/06 10:43 Armstrong btaaid issue fixed
118523 07/21/06 10:24 Armstrong Matrix screenshot, all but Octant 5 present
118522 07/21/06 10:08 Armstrong btaaid (beam time accounting) says we aren't ready for beam
118521 07/21/06 09:50 Armstrong end gain matching, beam to MCC for tuning
118520 07/21/06 09:43 vanoers Target:
118519 07/21/06 09:28 gzero End of Run 29859:
118518 07/21/06 09:27 vanoers Target:
118517 07/21/06 09:09 horn Run 29858 is junk - coda had to be restarted
118516 07/21/06 09:03 gzero Run 29859: gain matching. octant 8, 3.7 uA
118515 07/21/06 08:58 gzero Run 29858: gain matching. octant 8, 3.7 uA
118514 07/21/06 08:53 gzero End of Run 29857:
118513 07/21/06 08:50 vanoers Target: 15 K coolant decrease
118512 07/21/06 08:26 gzero Run 29857: gain matching. octant 6, 3.7 uA
118511 07/21/06 08:21 gzero End of Run 29856:
118510 07/21/06 08:07 jianglai owl shift summary
118509 07/21/06 07:59 cdaq Beam Time Accounting
118508 07/21/06 07:58 gzero Run 29856: gain matching. octant 4, 3.7 uA
118507 07/21/06 07:56 gzero End of Run 29855:
118506 07/21/06 07:43 jianglai debugging of octant 5 MT output
118505 07/21/06 07:29 gzero Run 29855: gain matching. octant 2, 3.7 uA
118504 07/21/06 07:24 gzero End of Run 29854:
118503 07/21/06 07:23 gzero Run 29854: junk
118502 07/21/06 07:17 gzero End of Run 29853:
118501 07/21/06 07:12 Larry Normalized Rates for NA Cerenkovs (with present tune), without typos this time hopefully
118500 07/21/06 06:58 Larry Normalized Rates for NA Cerenkovs (with present tune)
118499 07/21/06 06:52 gzero Run 29853: gain matching, octant 1, 3.7 uA
118498 07/21/06 06:48 gzero End of Run 29852:
118497 07/21/06 06:35 Larry New HV's for NA Cerenkov PMTs
118496 07/21/06 06:23 gzero Run 29852: gain matching, octant 3, 3.7 uA
118495 07/21/06 06:16 gzero Run 29851: LH2 362 MeV 1 uA all detectors
118494 07/21/06 06:12 gzero End of Run 29850:
118493 07/21/06 06:06 Toplosky beam position scan w/ 11mm halo target and "hole" target
118492 07/21/06 05:50 hood Target: LH2 to target : decreased hph to 200W
118491 07/21/06 05:48 gzero Run 29850: gain matching, octant 5, 3.7 uA
118490 07/21/06 05:46 gzero End of Run 29849:
118489 07/21/06 05:28 jianglai NA coinc electronics still have troubles
118488 07/21/06 05:16 gzero Run 29849: gain matching, octant 7, 3.7 uA
118487 07/21/06 05:15 gzero End of Run 29848:
118486 07/21/06 05:06 jianglai beam position scan with 11 mm halo target and the "hole" target
118485 07/21/06 04:56 Larry/Alex NA Cerenkov Anode currents from direct ammeter measurements
118484 07/21/06 04:50 gzero Run 29848: gain matching, octant 8, 1uA, continued
118483 07/21/06 04:45 gzero End of Run 29847:
118482 07/21/06 04:38 jianglai restarted codamaster, junk run 29847
118481 07/21/06 04:36 gzero Run 29847: gain matching, octant 8, 1uA
118480 07/21/06 04:32 gzero Run 29846: gain matching, octant 8, 1uA
118479 07/21/06 04:29 gzero End of Run 29845:
118478 07/21/06 04:23 gzero End of Run 29845:
118477 07/21/06 04:18 gzero Run 29845: junk
118476 07/21/06 04:16
118475 07/21/06 04:01 gzero End of Run 29844:
118474 07/21/06 03:37 hood Target: small hole moved to beam
118473 07/21/06 03:32 jianglai anode current monitor screen capture, LH2 target ,30 uA
118472 07/21/06 03:16 real PMT Right, CED 5 octant 8 does not work.
118471 07/21/06 03:15 jianglai SMS: magnet LHe level alarm.
118470 07/21/06 03:08 gzero Run 29844: acm etc
118469 07/21/06 03:04 gzero End of Run 29843:
118468 07/21/06 02:28 jianglai JSR's instruction to reboot the low voltage power supply
118467 07/21/06 02:25 gzero Run 29843: acm etc
118466 07/21/06 02:24 gzero End of Run 29843:
118465 07/21/06 02:23 jliu control access done
118464 07/21/06 02:18 hood Target: LH2 target in place
118463 07/21/06 01:25 jliu beam tuning ended. plan of the control access and afterwards
118462 07/21/06 01:20 muether SMS: Ramping SMS down for hall access
118461 07/21/06 01:13 real French detector/electronic overview, Low power supply is down
118460 07/21/06 01:06 Doug Beck Swing shfit summary
118459 07/21/06 01:05 Fatiha Shape of the fastbus ADC spectra for Oct1 and 3
118458 07/21/06 00:59 cdaq Beam Time Accounting
118457 07/21/06 00:36 jliu How to for the Halo GUI
118456 07/21/06 00:24 jliu cdaql5 rebooted
Thursday
118455 07/20/06 23:40 gzero Run 29842: junk to debug NA electronics
118454 07/20/06 23:39 gzero End of Run 29841:
118453 07/20/06 23:37 gzero Run 29841: junk to debug NA electronics
118452 07/20/06 23:37 real Roc 8 temperature is very HIGH
118451 07/20/06 23:32 gzero End of Run 29840:
118450 07/20/06 21:37 gzero Run 29840: junk to debug NA electronics
118449 07/20/06 21:34 beck/muether Coinsidence Matrtix Real Time Snapshot
118448 07/20/06 21:30 B.Quinn Target: Switching to carbon target
118447 07/20/06 21:29 gzero End of Run 29839:
118446 07/20/06 21:12 B.Quinn Target: Switching to LH2 target
118445 07/20/06 21:12 gzero Run 29839: LH2 362 MeV 1 uA all detectors
118444 07/20/06 20:11 B. Quinn Target: Changed to carbon target
118443 07/20/06 20:09 gzero End of Run 29838:
118442 07/20/06 19:59 gzero Run 29838: DAQ test
118441 07/20/06 19:53 B. Quinn Target: Limit for cooling LH2 target/ CHANGED LIMITS / CHANGED TARGET TEMP!!!
118440 07/20/06 19:50 gzero End of Run 29837:
118439 07/20/06 19:42 gzero Run 29837: DAQ test
118438 07/20/06 19:23 pking Analysis: Changed to the 362 MeV analysis database
118437 07/20/06 19:23 pking Analysis: Installed the new G0Analysis version and started the autoanalyzers
118436 07/20/06 18:51 pking Analysis: I have moved the old rootfiles and the old G0Scripts directory
118435 07/20/06 18:36 B. Quinn Target: Back to hole target (& changing JT)
118434 07/20/06 18:22 B. Quinn Target: Changing to radiator/ CHANGED ALARM LIMIT gbheat
118433 07/20/06 18:08 gzero End of Run 29836:
118432 07/20/06 18:07 gzero Run 29836: junk
118431 07/20/06 18:06 gzero End of Run 29835:
118430 07/20/06 18:03 B. Quinn Target: Changing to LH2 target
118429 07/20/06 17:55 B. Quinn Target: Opened JT valve
118428 07/20/06 17:53 Pitt Comments on Herbert's PMT data
118427 07/20/06 17:52 swells Run Plan for Swing/Owl July 20-21
118426 07/20/06 17:41 B. Quinn Target: Change to frame target
118425 07/20/06 17:29 B. Quinn Target: Change to carbon target
118424 07/20/06 16:51 B. Quinn Target: Small hole target (beam seems to be hitting frame)
118423 07/20/06 16:02 cdaq Beam Time Accounting
118422 07/20/06 15:58 Armstrong Shioft Summary: Day shift
118421 07/20/06 15:42 smithg Target: 15K supply temp remains unusually high
118420 07/20/06 15:18 muether SMS: H20 Temp continuing to go lower
118419 07/20/06 15:18 muether SMS: H20 Temp continuing to go lower
118418 07/20/06 14:37 smithg Target: Lost half our liquid from Hall A cooldown
118417 07/20/06 14:34 Maud HV file loaded
118416 07/20/06 14:22 smithg Target: Beam was slamming into the target flanges last night
118415 07/20/06 14:09 S, Bailey The little Pockels Cell That Could
118414 07/20/06 14:08 gzero End of Run 29834:
118413 07/20/06 13:50 muether SMS: H20 Temp at lead low
118412 07/20/06 11:57 gzero Run 29834: daq test
118411 07/20/06 11:41 Armstrong status
118410 07/20/06 09:58 vanoers Target: toke a snapshot
118409 07/20/06 08:17 jliu owl shift summary
118408 07/20/06 08:16 jliu owl shift summary
118407 07/20/06 07:52 gzero End of Run 29833:
118406 07/20/06 07:48 jliu realtime GUI response time
118405 07/20/06 07:41 gzero Run 29833: daq test for realtime
118404 07/20/06 07:00 jianglai beam status update
118403 07/20/06 04:42 jianglai beam status update
118402 07/20/06 04:15 gzero End of Run 29832:
118401 07/20/06 04:05 gzero Run 29832: junk to test realtime analyzer
118400 07/20/06 03:59 jianglai reference: May 06 anode current measurement on C target
118399 07/20/06 03:00 jianglai beam status
118398 07/20/06 01:41 Doug Beck SMS: Swing Shift Summary
118397 07/20/06 01:38 Toplosky Monitor PMT rate vs. BeamCurrent
118396 07/20/06 01:33 jianglai MCC status / shift plan
118395 07/20/06 00:11 beck/liu halo and paddle rates with C target
118394 07/20/06 00:07 beck/liu Beam: harp scan to determine the raster
Wednesday
118393 07/19/06 23:58 B. Quinn Target: Carbon target
118392 07/19/06 23:55 beck/liu Beam: some halo values
118391 07/19/06 23:48 B. Quinn Target: Hole target
118390 07/19/06 18:56 B. Quinn Target: Heater excursions/ beam steering
118389 07/19/06 18:45 B. Quinn Target: IOC reboot
118388 07/19/06 18:17 gzero End of Run 29831:
118387 07/19/06 18:15 gzero Run 29831: daq test
118386 07/19/06 18:12 swells Run Plan for Swing/Owl/Day July 19-20
118385 07/19/06 18:08 gzero End of Run 29830:
118384 07/19/06 16:17 smithg Target: tgt shift summary, snapshot, and plan for eventual beam
118383 07/19/06 16:05 muether SMS: Transition Lead B DQP Trip (Yellow)
118382 07/19/06 15:48 muether SMS: Ramping back to 2400
118381 07/19/06 15:14 muether HKS Drift Chambers Electronics Note
118380 07/19/06 15:11 muether SMS: Lead A thermocouple rmoved for repair
118379 07/19/06 14:34 gzero Run 29830: daq test
118378 07/19/06 14:31 gzero End of Run 29829:
118377 07/19/06 14:11 gzero Run 29829: Cer (FR+NA) threshold scan HV ON
118376 07/19/06 14:10 gzero End of Run 29828:
118375 07/19/06 13:55 gzero Run 29828: Cer (FR+NA) threshold scan HV off
118374 07/19/06 13:54 gzero End of Run 29827:
118373 07/19/06 13:54 gzero Run 29827: daq test
118372 07/19/06 12:38 gzero End of Run 29826:
118371 07/19/06 12:37 gzero Run 29826: daq test
118370 07/19/06 12:36 gzero End of Run 29825:
118369 07/19/06 12:30 gzero Run 29825: daq test
118368 07/19/06 10:25 gzero End of Run 29824:
118367 07/19/06 10:22 gzero Run 29824: Crosstalks test : Cerenkov PMTs on scale1
118366 07/19/06 09:56 gzero End of Run 29823:
118365 07/19/06 09:52 gzero Run 29823: Crosstalks test : Cerenkov PMTs on scale1, another slot on roc8
118364 07/19/06 09:47 gzero End of Run 29822:
118363 07/19/06 09:45 gzero Run 29822: Crosstalks test : Cerenkov PMTs on scale1, another slot on roc8
118362 07/19/06 09:35 gzero End of Run 29820:
118361 07/19/06 09:28 gzero Run 29820: Crosstalks test : Cerenkov PMTs on scale1, roc8
118360 07/19/06 08:56 gzero End of Run 29819:
118359 07/19/06 08:56 gzero Run 29819: Full test
118358 07/19/06 01:20 Breuer HV channels and values, rates for neutron test 5" and 2" tubes
118357 07/19/06 01:11 Breuer NA CED's 8 Amplifier cable length corrections, Oct 1,3,5
Tuesday
118356 07/18/06 23:29 gzero End of Run 29818:
118355 07/18/06 23:28 Fatiha Full Coda Configuration
118354 07/18/06 23:14 gzero Run 29818: Full test
118353 07/18/06 23:12 gzero End of Run 29817:
118352 07/18/06 23:11 gzero Run 29817: Full test
118351 07/18/06 22:53 gzero End of Run 29815:
118350 07/18/06 22:53 gzero Run 29815: Full test
118349 07/18/06 22:40 gzero End of Run 29813:
118348 07/18/06 22:29 gzero Run 29813: Full test + roc9
118347 07/18/06 22:23 gzero End of Run 29812:
118346 07/18/06 22:22 gzero Run 29812: Full test
118345 07/18/06 22:17 gzero End of Run 29811:
118344 07/18/06 22:01 gzero Run 29811: Full test + roc9
118343 07/18/06 21:40 gzero End of Run 29810:
118342 07/18/06 21:37 gzero Run 29810: Crosstalks test, FR CER scaler 1 in roc 9
118341 07/18/06 21:24 JSR, Goulven French scale2/roc8 moved on roc9
118340 07/18/06 21:19 gzero End of Run 29809:
118339 07/18/06 21:12 gzero Run 29809: Crosstalks test, FR CER scaler 1 in roc 9
118338 07/18/06 21:10 gzero End of Run 29808:
118337 07/18/06 21:10 gzero Run 29808: Crosstalks test, FR CER scaler 1 in roc 9
118336 07/18/06 21:06 gzero Run 29807: Crosstalks test, again and again...
118335 07/18/06 21:06 gzero End of Run 29807:
118334 07/18/06 20:45 gzero End of Run 29806:
118333 07/18/06 20:43 gzero Run 29806: Crosstalks test, again and again...
118332 07/18/06 20:39 Maud Analysis: French FPDs gainmatching + new Fr and NA cerenkovs HV
118331 07/18/06 20:36 gzero End of Run 29805:
118330 07/18/06 20:35 gzero Run 29805: Crosstalks test, again and again...
118329 07/18/06 20:32 muether HKS Drift Chamber gas now flowing
118328 07/18/06 20:29 gzero End of Run 29804:
118327 07/18/06 20:29 gzero Run 29804: Crosstalks test, again and again...
118326 07/18/06 20:23 gzero End of Run 29803:
118325 07/18/06 20:07 gzero Run 29803: Crosstalks test, again and again...
118324 07/18/06 20:06 gzero End of Run 29802:
118323 07/18/06 20:05 Maud. Analysis: French Cerenkov ADC calibration
118322 07/18/06 20:05 gzero Run 29802: Crosstalks test, again and again...
118321 07/18/06 20:04 gzero End of Run 29801:
118320 07/18/06 20:02 gzero Run 29801: Crosstalks test, again and again...
118319 07/18/06 19:57 gzero End of Run 29800:
118318 07/18/06 19:53 gzero Run 29800: Crosstalks test, again and again...
118317 07/18/06 19:49 gzero End of Run 29799:
118316 07/18/06 19:43 gzero Run 29799: Crosstalks test, again and again...
118315 07/18/06 19:42 gzero End of Run 29798:
118314 07/18/06 19:36 gzero Run 29798: Full test + roc9
118313 07/18/06 19:30 gzero End of Run 29797:
118312 07/18/06 19:23 gzero Run 29797: Full test + roc9
118311 07/18/06 19:20 gzero End of Run 29796:
118310 07/18/06 19:18 gzero Run 29796: Full test + roc9
118309 07/18/06 19:14 spwells Run Plan for Owl/Day shifts 7/18-19/06
118308 07/18/06 19:13 gzero End of Run 29795:
118307 07/18/06 19:12 gzero Run 29795: Full test + roc9
118306 07/18/06 19:03 gzero End of Run 29793:
118305 07/18/06 19:01 gzero Run 29793: Full test + roc9
118304 07/18/06 18:59 gzero End of Run 29792:
118303 07/18/06 18:58 gzero Run 29792: Full test + roc9
118302 07/18/06 18:54 gzero End of Run 29791:
118301 07/18/06 18:53 gzero Run 29791: Full test + roc9
118300 07/18/06 18:52 gzero End of Run 29790:
118299 07/18/06 18:51 gzero Run 29790: scaler FR-cer cross talk check
118298 07/18/06 18:44 muether SMS: SMS is now at 2400A
118297 07/18/06 18:42 gzero End of Run 29788:
118296 07/18/06 18:39 gzero Run 29788: scaler FR-cer cross talk check
118295 07/18/06 18:30 gzero End of Run 29787:
118294 07/18/06 18:26 Goulven French Cerenkov PMTs sum and corrected single baselines
118293 07/18/06 18:25 gzero Run 29787: scaler FR-cer cross talk check
118292 07/18/06 18:21 muether SMS: Ramping Magnet to 2400
118291 07/18/06 18:20 gzero End of Run 29786:
118290 07/18/06 18:18 gzero Run 29786: scaler FR-cer cross talk check
118289 07/18/06 18:16 gzero End of Run 29785:
118288 07/18/06 18:14 gzero Run 29785: scaler FR-cer cross talk check
118287 07/18/06 18:13 gzero End of Run 29784:
118286 07/18/06 18:10 gzero Run 29784: scaler FR-cer cross talk check
118285 07/18/06 17:57 gzero End of Run 29783:
118284 07/18/06 17:56 gzero Run 29783: scaler FR-cer cross talk check
118283 07/18/06 17:55 gzero End of Run 29782:
118282 07/18/06 17:52 gzero Run 29782: scaler FR-cer cross talk check
118281 07/18/06 17:45 gzero End of Run 29781:
118280 07/18/06 17:40 gzero Run 29781: scaler FR-cer cross talk check
118279 07/18/06 17:39 gzero End of Run 29780:
118278 07/18/06 17:36 smithg Target: main gui ksnapshot
118277 07/18/06 17:35 gzero Run 29780: Full test + roc9
118276 07/18/06 17:32 gzero End of Run 29779:
118275 07/18/06 17:29 smithg Target: disabled electronics room temp alarms for tonight
118274 07/18/06 17:28 gzero Run 29779: Test scaler cross talk (FR CER) in roc9
118273 07/18/06 17:26 gzero End of Run 29778:
118272 07/18/06 17:14 gzero Run 29778: Test scaler cross talk (FR CER)
118271 07/18/06 17:12 saw Target: Bad signals in target display
118270 07/18/06 16:55 smithg Target: Target cooldown summary
118269 07/18/06 16:28 suleiman | F Beam: G0 CAvity BPM Test with RF Generator
118268 07/18/06 16:15 beise High temperature in Electronics cage
118267 07/18/06 16:11 beise Lumis set for 60 uA 362 MeV setting
118266 07/18/06 16:11 beise Lumis set for 60 uA 362 MeV setting
118265 07/18/06 16:07 Lee/Bosted 2"-PMT Test Detectors positioned and cabled
118264 07/18/06 16:03 gzero End of Run 29777:
118263 07/18/06 16:00 muether/lee Ferris Wheel Position: 4 in
118262 07/18/06 16:00 muether SMS: Bad Water Temp Thermocouple
118261 07/18/06 15:47 gzero Run 29777: G0 Cavity 1 BPM test - I
118260 07/18/06 15:46 gzero End of Run 29776:
118259 07/18/06 15:30 Goulven New sum threshold for the French Cerenkov
118258 07/18/06 15:18 gzero Run 29776: G0 Cavity 2 BPM test - I
118257 07/18/06 15:17 gzero End of Run 29775:
118256 07/18/06 14:56 gzero Run 29775: G0 Cavity 2 BPM test
118255 07/18/06 14:54 gzero End of Run 29774:
118254 07/18/06 14:43 pking Analysis: Stopped hte autoanalyzer on the cdaql* machines
118253 07/18/06 14:27 gzero Run 29774: G0 Cavity 1 BPM test
118252 07/18/06 14:13 gzero End of Run 29773:
118251 07/18/06 14:10 gzero Run 29773: G0 Cavity BPM test
118250 07/18/06 13:19 S. Bailey Flipper is ready to go.
118249 07/18/06 13:06 Bailey & Sul G0 Injector Beam Studies -- 3rd Try
118248 07/18/06 12:46 gzero End of Run 29772:
118247 07/18/06 12:38 gzero Run 29772: In-time HC signal to IA/PC unplugged
118246 07/18/06 12:33 gzero End of Run 29771:
118245 07/18/06 12:25 gzero Run 29771: IA Scan - IN - RHWP=0, +HV=5.368, -HV=6.585
118244 07/18/06 12:23 gzero End of Run 29770:
118243 07/18/06 12:00 gzero Run 29770: IN - RHWP=0, +HV=5.368, -HV=6.585
118242 07/18/06 11:58 gzero End of Run 29769:
118241 07/18/06 11:35 Fatiha Added the readout of the 9th scaler in roc 9 Datastream
118240 07/18/06 11:35 gzero Run 29769: OUT - RHWP=0, +HV=5.468, -HV=6.485
118239 07/18/06 11:33 gzero End of Run 29768:
118238 07/18/06 11:20 JSR,Maud,Gou B4C shielding on the Cer6 PMTs
118237 07/18/06 11:03 gzero Run 29768: RHWP Scan - IN, PITA=0
118236 07/18/06 11:02 gzero End of Run 29767:
118235 07/18/06 10:33 gzero Run 29767: RHWP Scan - IN, PITA=-180
118234 07/18/06 10:31 gzero End of Run 29766:
118233 07/18/06 10:00 gzero Run 29766: RHWP Scan - OUT, PITA=-180
118232 07/18/06 09:55 gzero End of Run 29765:
118231 07/18/06 09:26 gzero Run 29765: RHWP Scan - OUT, PITA=0
118230 07/18/06 09:13 gzero End of Run 29764:
118229 07/18/06 08:56 gzero Run 29764: RHWP Scan - OUT, PITA=0
118228 07/18/06 08:54 gzero End of Run 29763:
118227 07/18/06 08:46 gzero Run 29763: Electronic Beam Noise - PC OFF
118226 07/18/06 08:41 gzero End of Run 29762:
118225 07/18/06 08:23 gzero Run 29762: BCM/BPM calib
118224 07/18/06 08:22 gzero End of Run 29761:
118223 07/18/06 08:20 gzero Run 29761: test run
118222 07/18/06 08:09 gzero Run 29760: BCM/BPM calib
118221 07/18/06 08:08 gzero End of Run 29759:
118220 07/18/06 08:08 gzero Run 29759: BCM/BPM calib
118219 07/18/06 07:56 gzero End of Run 29758:
118218 07/18/06 07:55 gzero Run 29758: Test run
118217 07/18/06 07:52 muether SMS: Temporary loss of water
118216 07/18/06 07:51 gzero End of Run 29757:
Monday
118215 07/17/06 23:17 Larry NA Cerenkov discriminators set to "Non-updating" mode
118214 07/17/06 23:07 Larry Herbert's Paddle & New "Virtual" detectors (5" PMTs) positioned and cabled
118213 07/17/06 22:56 Larry NA Cerenkov PMT dc offsets
118212 07/17/06 19:12 gzero End of Run 29753:
118211 07/17/06 19:04 gzero Run 29753: Crosstalks test : Cerenkov PMTs 2-2, 4-1 and 8-2 off (back to ROC8 in NA scale 8 from roc9)
118210 07/17/06 19:02 gzero End of Run 29752:
118209 07/17/06 18:55 gzero Run 29752: Crosstalks test : Cerenkov PMTs 2-2, 4-1 and 8-2 off (back to ROC9 in FR scale1 from roc8)
118208 07/17/06 18:44 gzero Run 29751: Crosstalks test : Cerenkov PMTs 2-2, 4-1 and 8-2 off (back to ROC9 in scale1 of roc8)
118207 07/17/06 18:40 Fatiha Will reboot the DAQ machine at 7 pm for disks Scan
118206 07/17/06 18:35 gzero End of Run 29750:
118205 07/17/06 18:28 gzero Run 29750: Crosstalks test : Cerenkov PMTs 2-2, 4-1 and 8-2 off (back to ROC8 in scale2)
118204 07/17/06 18:25 gzero End of Run 29749:
118203 07/17/06 18:20 gzero Run 29749: Crosstalks test : Cerenkov PMTs 2-1, 4-1 and 8-2 off (back to ROC8)
118202 07/17/06 18:16 gzero End of Run 29748:
118201 07/17/06 18:12 gzero Run 29748: crosstalks test: Cerenkov on ROC9, PMTs 2-2, 4-1 and 8-2 off
118200 07/17/06 18:09 gzero End of Run 29747:
118199 07/17/06 18:07 gzero Run 29747: Test cerenlov on roc9
118198 07/17/06 18:04 gzero End of Run 29746:
118197 07/17/06 18:04 gzero Run 29746: Junk
118196 07/17/06 18:03 gzero End of Run 29745:
118195 07/17/06 17:59 gzero Run 29745: Test roc9
118194 07/17/06 17:55 gzero End of Run 29744:
118193 07/17/06 17:49 muether SMS: Lead A Water Temp Thermocouple Problem
118192 07/17/06 17:48 gzero Run 29744: special run, croos talk check on french cer PMTs, HV off for 2-1,2-2, 4-2, 8-2
118191 07/17/06 17:46 gzero End of Run 29743:
118190 07/17/06 17:41 gaskell Plan for tonight/tomorrow
118189 07/17/06 17:41 gzero Run 29743: special run, croos talk check on french cer PMTs, HV off for 2-2, 4-2, 8-2
118188 07/17/06 17:09 beise Analysis: Simulation of rates at 360 MeV, for future reference
118187 07/17/06 16:58 gzero End of Run 29742:
118186 07/17/06 16:39 gzero Run 29742: special run, croos talk check on french cer PMTs, HV off for 2-1,2-2, 4-2, 8-2
118185 07/17/06 16:37 gzero End of Run 29741:
118184 07/17/06 16:34 gzero Run 29741: Full test + roc9
118183 07/17/06 16:32 gzero End of Run 29740:
118182 07/17/06 16:28 gzero Run 29740: special run, FR cerenkov test . Cerenkov single are on scaler 9 roc9 HV off cer2-2
118181 07/17/06 16:26 gzero End of Run 29739:
118180 07/17/06 16:21 saw cdaql4 reboot
118179 07/17/06 16:18 gzero Run 29739: special run, FR cerenkov test . Cerenkov single are on scaler 9 roc9
118178 07/17/06 16:18 gzero End of Run 29738:
118177 07/17/06 16:17 gzero Run 29738: special run, FR cerenkov test . Cerenkov single are on scaler 9 roc9
118176 07/17/06 16:11 gzero End of Run 29737:
118175 07/17/06 16:01 gzero Run 29737: special run, FR cerenkov test HV OFF on oct 2-pm2
118174 07/17/06 15:54 Bailey & Sul G0 Pockels Cell Installation - 2nd Try
118173 07/17/06 15:51 gzero End of Run 29736:
118172 07/17/06 15:43 gzero Run 29736: special run, FR cerenkov test oct 2-pm2
118171 07/17/06 15:42 Goulven New French Cerenkov PMTs high voltage values
118170 07/17/06 15:42 gzero End of Run 29735:
118169 07/17/06 15:42 gzero Run 29735: daqtest junk
118168 07/17/06 15:40 gzero End of Run 29734:
118167 07/17/06 15:39 gzero Run 29734: daq test junk
118166 07/17/06 15:36 gzero End of Run 29733:
118165 07/17/06 15:34 gzero Run 29733: test cerenkov 2PM2 scalers (special run)
118164 07/17/06 15:20 gaskell this is the position where FW was surveyed
118163 07/17/06 15:05 Bailey & Su We are finished with CODA today and will need it again tomorrow at 8 am
118162 07/17/06 14:58 gzero End of Run 29732:
118161 07/17/06 14:40 gzero Run 29732: RHWP
118160 07/17/06 14:38 gzero End of Run 29731:
118159 07/17/06 14:37 gzero Run 29731: QPD Centering
118158 07/17/06 14:25 horn Ferris Wheel Survey Result
118157 07/17/06 14:22 gzero End of Run 29730:
118156 07/17/06 14:18 gzero Run 29730: Biref IHWP Out, LP < =145
118155 07/17/06 14:15 gzero End of Run 29729:
118154 07/17/06 14:13 gzero Run 29729: Biref IHWP Out, LP < =100
118153 07/17/06 14:10 gzero End of Run 29728:
118152 07/17/06 14:04 gzero Run 29728: Birefringence, IHWP IN
118151 07/17/06 14:03 gzero End of Run 29727:
118150 07/17/06 13:57 gzero Run 29727: Birefringence, IHWP OUT
118149 07/17/06 13:52 gzero End of Run 29726:
118148 07/17/06 13:48 gzero Run 29726: QPD Y Translation
118147 07/17/06 13:41 gzero End of Run 29725:
118146 07/17/06 13:36 gzero Run 29725: QPD X Translation
118145 07/17/06 13:31 gzero End of Run 29724:
118144 07/17/06 13:30 gzero Run 29724: QPD Centering
118143 07/17/06 13:28 gzero End of Run 29723:
118142 07/17/06 13:27 gzero Run 29723: QPD Centering
118141 07/17/06 13:23 gzero End of Run 29722:
118140 07/17/06 13:22 gzero Run 29722: QPD Centering
118139 07/17/06 13:19 gzero End of Run 29721:
118138 07/17/06 13:18 gzero Run 29721: QPD Centering
118137 07/17/06 13:17 Goulven New baselines for the French Cerenkov PMTs
118136 07/17/06 13:08 gzero End of Run 29720:
118135 07/17/06 13:02 gzero Run 29720: Steering Asym, IHWP IN
118134 07/17/06 13:01 gzero End of Run 29719:
118133 07/17/06 12:54 gzero Run 29719: Steering Y, IHWP IN
118132 07/17/06 12:37 gzero End of Run 29718:
118131 07/17/06 12:32 gzero Run 29718: Steering Y, IHWP IN
118130 07/17/06 12:31 gzero End of Run 29717:
118129 07/17/06 12:25 gzero Run 29717: Steering X, IHWP IN
118128 07/17/06 12:23 gzero End of Run 29716:
118127 07/17/06 12:16 gzero Run 29716: Steering Y, IHWP OUT
118126 07/17/06 12:12 gzero End of Run 29715:
118125 07/17/06 12:00 gzero Run 29715: Steering X, IHWP OUT
118124 07/17/06 11:56 gzero End of Run 29714:
118123 07/17/06 11:33 gzero Run 29714: Electronic Noise
118122 07/17/06 11:28 gzero End of Run 29713:
118121 07/17/06 11:24 gzero Run 29713: PC ON, IHWP IN, Steering
118120 07/17/06 11:23 gzero End of Run 29712:
118119 07/17/06 11:20 gzero Run 29712: PC ON, IHWP OUT, Steering
118118 07/17/06 11:19 gzero End of Run 29711:
118117 07/17/06 11:16 gzero Run 29711: Electronic Noise
118116 07/17/06 11:10 gzero End of Run 29710:
118115 07/17/06 11:06 gzero Run 29710: QPD Y Translation
118114 07/17/06 11:01 gzero End of Run 29709:
118113 07/17/06 10:57 gzero Run 29709: QPD X Translation
118112 07/17/06 10:54 gzero End of Run 29708:
118111 07/17/06 10:49 gzero Run 29708: QPD X Translation
118110 07/17/06 10:49 gzero End of Run 29707:
118109 07/17/06 10:48 gzero Run 29707: QPD X Translation
118108 07/17/06 10:45 ellis Lumi HV settings for 362
118107 07/17/06 10:39 gzero End of Run 29706:
118106 07/17/06 10:37 gzero Run 29706: QPD Pedestal
118105 07/17/06 10:32 gzero End of Run 29705:
118104 07/17/06 10:32 gzero Run 29705: QPD Centering
118103 07/17/06 10:30 gzero End of Run 29704:
118102 07/17/06 10:29 gzero Run 29704: QPD Centering
118101 07/17/06 10:26 gzero End of Run 29703:
118100 07/17/06 10:25 gzero Run 29703: QPD Centering
118099 07/17/06 10:16 gzero End of Run 29702:
118098 07/17/06 10:13 gzero Run 29702: QPD Centering
118097 07/17/06 10:12 gaskell Moller cooldown complete
118096 07/17/06 09:27 gzero End of Run 29701:
118095 07/17/06 07:34 S. Bailey PC Alignment this morning - Please do not use CODA
118094 07/17/06 07:22 gaskell start Moller cooldown
118093 07/17/06 02:15 muether SMS: another water temp alarm
Sunday
118092 07/16/06 22:11 muether SMS: Sucessful SMS Power test
118091 07/16/06 21:49 gzero Run 29701: Cosmic run FC=CED-FPD OR
118090 07/16/06 21:46 gzero End of Run 29700:
118089 07/16/06 21:46 gzero Run 29700: Full test + roc9
118088 07/16/06 21:26 gzero End of Run 29699:
118087 07/16/06 21:10 gzero Run 29699: Special run for French Cerenkov with Roc9
118086 07/16/06 21:08 gzero End of Run 29698:
118085 07/16/06 20:50 muether SMS: Performing Magnet Power Test
118084 07/16/06 20:48 gzero Run 29698: French Cerenkov PMTs test
118083 07/16/06 20:40 gzero End of Run 29697:
118082 07/16/06 20:25 gzero Run 29697: Octant 2 Cer PMTs test
118081 07/16/06 19:47 gzero End of Run 29696:
118080 07/16/06 19:34 Goulven run 29695 properties
118079 07/16/06 19:32 gzero Run 29696: French Cerenkov test
118078 07/16/06 19:02 gzero End of Run 29695:
118077 07/16/06 18:40 gzero Run 29695: French Cerenkov PMTs test
118076 07/16/06 18:34 gzero End of Run 29694:
118075 07/16/06 18:19 gzero Run 29694: Octant 2 Cer PMTs test
118074 07/16/06 18:14 gzero End of Run 29693:
118073 07/16/06 17:27 muether SMS: recieved another water temp alarm on lead A
118072 07/16/06 17:09 gzero Run 29693: special run for Fr cerenkov PE measurement
118071 07/16/06 13:26 muether SMS: Water Temp A Low Alarm
118070 07/16/06 09:53 S. Bailey PC Installation on Monday, need CODA beginning at 8 am
118069 07/16/06 08:30 gzero End of Run 29692:
118068 07/16/06 08:15 gzero Run 29692: special run for Fr cerenkov PE measurement
118067 07/16/06 08:15 real run 29691 is junk
118066 07/16/06 08:10 gzero End of Run 29691:
118065 07/16/06 08:09 gzero Run 29691: special run for Fr cerenkov PE measurement
Saturday
118064 07/15/06 21:18 gzero End of Run 29690:
118063 07/15/06 20:56 gzero Run 29690: Fr cerenkov threshold at 1.9 pe sum at 90 mv
118062 07/15/06 20:49 gzero End of Run 29689:
118061 07/15/06 20:40 gzero Run 29689: Fr cerenkov threshold at 1.8 pe sum at 250 mv
118060 07/15/06 20:23 gzero End of Run 29688:
118059 07/15/06 20:09 gzero Run 29688: Fr cerenkov threshold at 1.4 pe sum at 230 mv
118058 07/15/06 20:07 gzero End of Run 29687:
118057 07/15/06 20:06 gzero Run 29687: Fr cerenkov threshold at 1.2 pe sum at 200 mv
118056 07/15/06 19:53 real Run 29685 and 29683 are junk
118055 07/15/06 19:48 gzero End of Run 29686:
118054 07/15/06 19:35 gzero Run 29686: special run for rates of french cerenkov vs threshold
118053 07/15/06 19:34 gzero End of Run 29685:
118052 07/15/06 19:30 gzero Run 29685: special run for rates of french cerenkov vs threshold
118051 07/15/06 19:21 gzero Run 29683: special run for rates of french cerenkov vs threshold
118050 07/15/06 19:16 gzero End of Run 29682:
118049 07/15/06 19:10 gzero Run 29682: French Cer threshold test 1 pe sum at 180 mv
118048 07/15/06 19:05 gzero End of Run 29681:
118047 07/15/06 19:00 gzero Run 29681: French Cer threshold test 0.9pe sum at 150 mv
118046 07/15/06 18:52 gzero End of Run 29680:
118045 07/15/06 18:35 gzero Run 29680: French Cer threshold test 0.8pe sum at 140 mv
118044 07/15/06 18:28 gzero End of Run 29679:
118043 07/15/06 18:19 gzero Run 29679: French Cer threshold test 0.7pe sum at 120 mv
118042 07/15/06 18:14 gzero End of Run 29678:
118041 07/15/06 17:57 gzero Run 29678: French Cer threshold test 0.6pe sum at 100 mv
118040 07/15/06 17:54 gzero End of Run 29677:
118039 07/15/06 17:51 gzero End of Run 29677:
118038 07/15/06 17:40 gzero Run 29677: French Cer threshold test 0.5pe sum at 80 mv
118037 07/15/06 17:37 gzero End of Run 29676:
118036 07/15/06 17:25 gzero Run 29676: French Cer threshold test 0.4pe sum at 60 mv
118035 07/15/06 17:21 gzero End of Run 29675:
118034 07/15/06 17:11 gzero Run 29675: French Cer threshold test 0.3pe sum at 40 mv
118033 07/15/06 17:07 gzero End of Run 29674:
118032 07/15/06 16:58 gzero Run 29674: French Cer threshold test 0.3pe sum at 40 mv
118031 07/15/06 16:55 gzero End of Run 29673:
118030 07/15/06 16:42 gzero Run 29673: French Cer threshold test 0.2pe
118029 07/15/06 16:38 gzero End of Run 29672:
118028 07/15/06 16:28 gzero Run 29672: French Cer threshold test 0.1pe, one more time
118027 07/15/06 16:24 gzero Run 29671: French Cer threshold test 0.1pe
118026 07/15/06 16:24 gzero End of Run 29671:
118025 07/15/06 16:21 gzero End of Run 29670:
118024 07/15/06 16:13 JSR+G+M change of FASTCLEAR signal
118023 07/15/06 16:06 gzero Run 29670: French Cer threshold test 0.1pe
118022 07/15/06 12:50 JSR,Maud,Gou B4C shielding on the Cer4 PMTs
118021 07/15/06 11:36 gzero End of Run 29669:
118020 07/15/06 11:33 gzero Run 29669: 30Hz for french rates measurement
118019 07/15/06 09:29 gzero End of Run 29668:
Friday
118018 07/14/06 23:48 Breuer base for octant 1 FPD 6 Right should be replaced; seems to work however
118017 07/14/06 23:43 Breuer Tested and repaired as necessary all NA FPD and CED signals.
118016 07/14/06 23:35 Breuer Prepared HV, signal cables for two 5" tubes for shielding tests
118015 07/14/06 23:20 gzero Run 29668: cosmic + green bloc run; NA new A.and.B trigger, HV on
118014 07/14/06 23:17 gzero End of Run 29667:
118013 07/14/06 20:29 real rates of FPD, CED and cerenkov FR
118012 07/14/06 19:58 gzero Run 29667: cosmic + green bloc run
118011 07/14/06 19:56 real french fastclear has changed
118010 07/14/06 19:54 real Octant 8 was not in fastclear
118009 07/14/06 19:51 gzero End of Run 29666:
118008 07/14/06 19:34 JSR, Goulven New amplitude and offset values for French Cerenkov PMTs
118007 07/14/06 19:33 gzero Run 29666: 30 Hz + fastbus test for French cerenkov
118006 07/14/06 19:31 real Ars channel 4 to 7 is now used for cerenkov octant 4 (it was analog sum)
118005 07/14/06 19:25 real setting individual Fr cerenkov PMTs Discriminator in NON updating mode
118004 07/14/06 18:28 gzero End of Run 29665:
118003 07/14/06 18:16 gzero Run 29665: 30 Hz test for French cerenkov
118002 07/14/06 18:04 gzero End of Run 29664:
118001 07/14/06 18:03 gzero End of Run 29664:
118000 07/14/06 18:02 gzero Run 29664: 30 Hz test for French cerenkov
117999 07/14/06 16:03 gzero End of Run 29663:
117998 07/14/06 15:56 gzero Run 29663: cosmics for NA with NA trigger A or B, no 30Hz
117997 07/14/06 15:37 muether SMS: SMS loving level with 42% max PID setting
117996 07/14/06 15:03 gaskell DO NOT MOVE FERRIS WHEEL!
117995 07/14/06 14:22 muether SMS: SMS Cool and in PID
117994 07/14/06 13:06 gzero End of Run 29662:
117993 07/14/06 12:29 gzero Run 29662: cosmics for NA with NA trigger A or B, no 30Hz
117992 07/14/06 09:20 muether SMS: SMS Level beggining to recover
117991 07/14/06 08:56 gzero End of Run 29661:
117990 07/14/06 08:18 kenyon SMS: Recovering g0
Thursday
117989 07/13/06 23:44 Breuer reinstalled Oct 1 CED 9 preamp; removed capacitive couplers from Oct 7 CEDs 9
117988 07/13/06 23:39 Breuer New NA singles scalers ROC 9 implemented and cabled up; TDC's may be affected
117987 07/13/06 23:24 gzero Run 29661: ts_Full cosmics, NA with A*B trigger, only fastbus with fast clear
117986 07/13/06 23:16 gzero End of Run 29660:
117985 07/13/06 23:15 gzero End of Run 29660:
117984 07/13/06 22:49 gzero Run 29660: Full test + roc9, cosmics; NA Trigger A or B, new scalers/TDC,Fastbus+30Hz
117983 07/13/06 22:44 gzero End of Run 29659:
117982 07/13/06 22:43 gzero Run 29659: garbage
117981 07/13/06 22:41 gzero End of Run 29658:
117980 07/13/06 20:22 gzero Run 29658: cosmic run for gain matching
117979 07/13/06 20:07 JSR,Goulven, work on french detectors
117978 07/13/06 18:15 gaskell Hall C lockup delayed
117977 07/13/06 17:46 muether SMS: Cryo Issues continue for the SMS
117976 07/13/06 10:22 gaskell Hall C cryo issues this morning
117975 07/13/06 03:30 Bailey & Sul We are done with CODA
117974 07/13/06 03:28 Bailey & Sul G0 Beam Studies -- Day 3
117973 07/13/06 02:49 gzero End of Run 29657:
117972 07/13/06 02:25 gzero Run 29657: RHWP Scan - OUT, PITA=-180
117971 07/13/06 02:22 gzero End of Run 29656:
117970 07/13/06 01:59 gzero Run 29656: RHWP Scan - OUT, PITA=0
117969 07/13/06 01:50 gzero End of Run 29655:
117968 07/13/06 01:44 gzero Run 29655: OUT run
117967 07/13/06 01:35 gzero End of Run 29654:
117966 07/13/06 01:12 gzero Run 29654: RHWP Scan - IN, PITA=-180
117965 07/13/06 00:59 gzero End of Run 29653:
117964 07/13/06 00:36 gzero Run 29653: RHWP Scan - IN, PITA=0
117963 07/13/06 00:34 gzero End of Run 29652:
117962 07/13/06 00:30 gzero Run 29652: RHWP Scan - IN, PITA=0
117961 07/13/06 00:22 gzero End of Run 29651:
117960 07/13/06 00:07 gzero Run 29651: PC OFF - Electronic Noise
117959 07/13/06 00:04 gzero End of Run 29650:
Wednesday
117958 07/12/06 23:48 gzero Run 29650: BCM/BPM Calib
117957 07/12/06 23:30 gzero End of Run 29649:
117956 07/12/06 23:24 gzero Run 29649: PC OFF - Electronic noise
117955 07/12/06 23:23 gzero End of Run 29648:
117954 07/12/06 23:21 gzero Run 29648: injector test run
117953 07/12/06 23:19 gzero End of Run 29647:
117952 07/12/06 23:18 gzero Run 29647: injector test run
117951 07/12/06 23:06 gzero End of Run 29646:
117950 07/12/06 22:58 gzero Run 29646: injector test run
117949 07/12/06 22:54 suleiman Coda is now running in MCC
117948 07/12/06 21:24 gzero Run 29645: Cosmic run without Cer4 and Cer6
117947 07/12/06 21:17 gzero End of Run 29644:
117946 07/12/06 19:03 gzero Run 29644: Cosmic run without Cer4 and Cer6
117945 07/12/06 18:55 gzero End of Run 29643:
117944 07/12/06 18:55 gzero Run 29643: cosmics FB with fast clear; NA FPD-MT (B) trigger
117943 07/12/06 17:02 gaskell more Moller changes
117942 07/12/06 16:52 cdaq Moller Run 61651: DAQ check
117941 07/12/06 16:25 cdaq Moller Run 61650: DAQ check
117940 07/12/06 16:22 cdaq Moller Run 61649: DAQ check
117939 07/12/06 16:20 cdaq Moller Run 61648: DAQ check
117938 07/12/06 13:04 gzero End of Run 29642:
117937 07/12/06 11:52 cdaq Moller Run 61646: DAQ check
117936 07/12/06 11:45 cdaq Moller Run 61645: DAQ check
117935 07/12/06 11:40 cdaq Moller Run 61644: DAQ check
117934 07/12/06 11:34 cdaq Moller Run 61643: DAQ check
117933 07/12/06 11:30 jschaub PMT swap
Tuesday
117932 07/11/06 22:53 gzero Run 29642: cosmics FB with fast clear; NA FPD-MT (B) trigger
117931 07/11/06 22:51 gzero End of Run 29641:
117930 07/11/06 22:26 gzero Run 29641: cosmics FB with fast clear
117929 07/11/06 21:17 breuer returned modified and repaired scalers from UMD to Jlab
117928 07/11/06 16:51 cdaq Moller Run 61642: DAQ check
117927 07/11/06 16:25 gzero End of Run 29640:
117926 07/11/06 16:19 gzero Run 29640: Test for FB with fast clear
117925 07/11/06 16:17 gzero End of Run 29639:
117924 07/11/06 16:16 gzero Run 29639: Test for FB with fast clear
117923 07/11/06 15:29 muether SMS: LHe Level Dropped below 70%
117922 07/11/06 11:21 cdaq Moller Run 61641: DAQ check
117921 07/11/06 11:18 cdaq Moller Run 61640: DAQ check
117920 07/11/06 11:17 cdaq Moller Run 61639: DAQ check
117919 07/11/06 11:08 cdaq Moller Run 61638: DAQ check
117918 07/11/06 10:59 cdaq Moller Run 61637: DAQ check
117917 07/11/06 10:55 cdaq Moller Run 61635: DAQ check
117916 07/11/06 10:26 gaskell Moller channel swap
Monday
117915 07/10/06 23:34 Gilberto/Joh Detectors change
117914 07/10/06 20:02 S. Bailey G0 Beam studies -- Day 2 (correction)
117913 07/10/06 19:23 muether SMS: PLC heartbeat stopped
117912 07/10/06 17:47 Fatiha test
117910 07/10/06 14:09 ellis Lumi HV settings for LD2, 362Mev high current runs
117909 07/10/06 14:09 S. Bailey I restored g0cuts.in on gzero@cdaq
117908 07/10/06 13:13 Bailey & Sul G0 Beam Studies -- Day 2
117907 07/10/06 12:58 S. Bailey beam studies done today, returning CODA
117906 07/10/06 12:56 gzero End of Run 29638:
117905 07/10/06 12:50 gzero Run 29638: PC OFF - unplugged 4 QPD cables
117904 07/10/06 12:48 gzero End of Run 29637:
117903 07/10/06 12:41 gzero Run 29637: PC OFF - helicity magnet Fiber plugged
117902 07/10/06 12:41 gzero End of Run 29636:
117901 07/10/06 12:33 gzero Run 29636: PC OFF - PC Fiber plugged
117900 07/10/06 12:32 gzero End of Run 29635:
117899 07/10/06 12:25 gzero Run 29635: PC OFF - PC Fiber unplugged
117898 07/10/06 12:21 gzero End of Run 29634:
117897 07/10/06 12:19 gzero Run 29634: PC OFF - PC Fiber unplugged
117896 07/10/06 12:09 gzero End of Run 29633:
117895 07/10/06 12:08 gzero Run 29633: PC OFF - PC Fiber plugged
117894 07/10/06 12:00 gzero End of Run 29632:
117893 07/10/06 11:59 gzero Run 29632: PC OFF - PC Fiber unplugged
117892 07/10/06 11:56 gzero End of Run 29631:
117891 07/10/06 11:55 gzero Run 29631: PC OFF
117890 07/10/06 11:51 gzero End of Run 29630:
117889 07/10/06 11:48 gzero Run 29630: PC OFF
117888 07/10/06 11:47 gzero End of Run 29629:
117887 07/10/06 11:46 gzero Run 29629: PC OFF
117886 07/10/06 10:26 saw Changes to EPICS gateway
117885 07/10/06 09:54 gzero End of Run 29628:
117884 07/10/06 09:25 gzero Run 29628: pedestal run to check for electronic noise
117883 07/10/06 09:24 gzero End of Run 29627:
117882 07/10/06 09:18 gzero Run 29627: pedestal run to check for electronic noise
Sunday
117881 07/09/06 15:48 Bailey & Sul We are keeping CODA running
117880 07/09/06 15:42 Bailey & Sul G0 Beam Studies -- Day 1
117879 07/09/06 15:02 gzero End of Run 29626:
117878 07/09/06 14:59 gzero Run 29626: Transmission Run - OUT, PC OFF
117877 07/09/06 14:58 gzero End of Run 29625:
117876 07/09/06 14:55 gzero Run 29625: Trasmission run - OUT
117875 07/09/06 14:44 gzero End of Run 29624:
117874 07/09/06 14:37 gzero Run 29624: PITA Scan - IN
117873 07/09/06 14:29 gzero End of Run 29623:
117872 07/09/06 14:26 gzero Run 29623: Full test + roc9
117871 07/09/06 14:25 gzero End of Run 29622:
117870 07/09/06 14:22 gzero Run 29622: PC OFF
117869 07/09/06 14:21 gzero End of Run 29621:
117868 07/09/06 14:21 gzero Run 29621: junk
117867 07/09/06 13:54 gzero End of Run 29620:
117866 07/09/06 13:48 gzero Run 29620: IA Scan - PC OFF
117865 07/09/06 13:41 gzero End of Run 29619:
117864 07/09/06 13:35 gzero Run 29619: PC OFF
117863 07/09/06 13:31 gzero End of Run 29618:
117862 07/09/06 13:17 gzero Run 29618: BPM/BCM Calib
117861 07/09/06 13:15 gzero End of Run 29617:
117860 07/09/06 13:07 gzero Run 29617: BPM/BCM Calib
117859 07/09/06 13:00 gzero End of Run 29616:
117858 07/09/06 12:54 gzero Run 29616: Pockels Cell OFF
117857 07/09/06 12:53 gzero End of Run 29615:
117856 07/09/06 12:47 gzero Run 29615: RHWP Scan - IN, PITA=0
117855 07/09/06 12:46 gzero End of Run 29614:
117854 07/09/06 12:40 gzero Run 29614: PC OFF - Electronic Noise
117853 07/09/06 12:39 gzero End of Run 29613:
117852 07/09/06 12:39 gzero Run 29613: test
117851 07/09/06 12:26 gzero End of Run 29612:
117850 07/09/06 12:25 gzero Run 29612: test run
117849 07/09/06 12:13 gzero End of Run 29611:
117848 07/09/06 12:10 gzero Run 29611: RHWP Scan - IN, PITA=0
117847 07/09/06 12:08 gzero End of Run 29610:
117846 07/09/06 12:02 gzero Run 29610: PC OFF - Electronic Noise
117845 07/09/06 11:56 gzero End of Run 29609:
117844 07/09/06 11:55 gzero Run 29609: test run
117843 07/09/06 11:48 gzero End of Run 29608:
117842 07/09/06 11:46 gzero Run 29608: test run
117841 07/09/06 11:41 gzero End of Run 29607:
117840 07/09/06 11:15 gzero Run 29607: Pockels Cell OFF - Electronic noise
117839 07/09/06 11:14 gzero End of Run 29606:
117838 07/09/06 11:07 gzero Run 29606: Pockels Cell OFF - Electronic noise
117837 07/09/06 11:01 gzero End of Run 29605:
117836 07/09/06 11:00 gzero Run 29605: Pockels Cell OFF - Electronic noise
117835 07/09/06 10:54 gzero End of Run 29604:
117834 07/09/06 10:35 gzero Run 29604: Pockels Cell OFF - Electronic noise
117833 07/09/06 10:31 gzero End of Run 29603:
117832 07/09/06 10:13 gzero Run 29603: BPM/BCM Calib
117831 07/09/06 08:57 gzero End of Run 29602:
117830 07/09/06 08:52 gzero Run 29602: beam test run
117829 07/09/06 08:19 gzero End of Run 29601:
117828 07/09/06 08:15 gzero Run 29601: beam studies daq test
Saturday
117827 07/08/06 12:44 S. Bailey Important: I changed g0cuts.in on gzero@cdaq so beam trip cut is made on inj BCM
Friday
117826 07/07/06 17:37 S. Bailey Beam: G0 Beam studies on Sunday
117825 07/07/06 11:38 gaskell Moller cooldown complete
117824 07/07/06 07:37 gaskell start Moller cooldown
Thursday
117823 07/06/06 17:51 Fatiha/Herbe More on our tests on Friday
117822 07/06/06 17:29 gzero End of Run 29600:
117821 07/06/06 17:29 Pitt/Suleima Boron content of borpoly blocks
117820 07/06/06 17:29 gzero Run 29600: Full test - prescale at 0 - Disable fast clear
117819 07/06/06 17:23 gzero End of Run 29599:
117818 07/06/06 17:21 gzero Run 29599: Full test
117817 07/06/06 17:17 gzero Run 29598: ts_inj
117816 07/06/06 15:45 gzero End of Run 29597:
117815 07/06/06 15:45 gzero Run 29597: ts_inj
117814 07/06/06 15:44 gzero End of Run 29596:
117813 07/06/06 15:43 gzero Run 29596: Full test
117812 07/06/06 14:17 gzero End of Run 29595:
117811 07/06/06 14:17 gzero Run 29595: Full test without 9
117810 07/06/06 14:09 gzero End of Run 29594:
117809 07/06/06 14:09 gzero Run 29594: test roc8
117808 07/06/06 14:03 gzero End of Run 29593:
117807 07/06/06 14:01 gzero Run 29593: test_fb , no ted
117806 07/06/06 13:59 gzero End of Run 29592:
117805 07/06/06 13:58 gzero Run 29592: ts_fb, fastclear disabled 30Hz, ps4= 0
117804 07/06/06 13:53 gzero End of Run 29591:
117803 07/06/06 13:50 gzero Run 29591: Full test + roc9
117802 07/06/06 13:42 gzero End of Run 29590:
117801 07/06/06 13:40 gzero Run 29590: ts_roc31 test
117800 07/06/06 13:39 gzero End of Run 29589:
117799 07/06/06 13:37 gzero Run 29589: ts_roc31 test
117798 07/06/06 11:51 gzero End of Run 29588:
117797 07/06/06 11:39 gzero Run 29588: Ts_roc1 test
117796 07/06/06 11:34 gzero Run 29587: ts_roc1 test
117795 07/06/06 11:13 gzero End of Run 29586:
117794 07/06/06 11:12 gzero Run 29586: Test
Monday
117793 07/03/06 09:25 gaskell warm helium going off
Sunday
117792 07/02/06 03:21 muether SMS: disabled Lhe level high and Lhe level low through orange
117791 07/02/06 00:35 kenyon SMS: EPICS variables
117790 07/02/06 00:20 kenyon SMS: g0 on cold return
117789 07/02/06 00:02 kenyon SMS: switching to cold return
Saturday
117788 07/01/06 23:04 kenyon SMS: g0 recovery
117787 07/01/06 22:58 kenyon SMS: Software feature
117786 07/01/06 22:37 kenyon SMS: Thawed PPR
117785 07/01/06 22:12 muether/keny SMS: Cryo Failure
117784 07/01/06 22:10 kenyon SMS: ESR problem
This file generated by /group/hallc/www/hallcweb/apps/logbooks/hclog/src/hclogscript version HC2.10
If you have any comments or problems, please contact:
Stephen A. Wood
saw@jlab.org
(757) 269-7367