Jefferson Lab Hall C Logbook for October 09 - runstarts omitted
Main INDEX
Saturday
194121 10/31/09 23:51 bono fission pressure
194118 10/31/09 23:44 amour Pressure for FFD
194115 10/31/09 23:27 shichijo histogram check for run 77071
194114 10/31/09 23:22 bono 77071 beam screen shot
194113 10/31/09 23:17 shichijo run 77070 was junk
194112 10/31/09 23:11 shichijo Many DAQ warnings
194109 10/31/09 23:02 shichijo histogram check for run 77069
194108 10/31/09 22:52 Nue Zeros for sieve slits' positions are OK.
194107 10/31/09 22:50 shichijo EDC/HDC HV screen shot (run 77069)
194105 10/31/09 22:43 bono 77069 magnet screen shot
194104 10/31/09 22:42 bono 77069 beam screen shot
194100 10/31/09 22:27 maruta Late entry: HES-Q2 PS current records every 2second in data stream after the 2nd power outage.
194099 10/31/09 22:09 shichijo histogram check for run 77068
194098 10/31/09 22:09 bono precisely, we made them scream shots
194097 10/31/09 22:07 bono 76068 HV screen shot
194096 10/31/09 22:05 bono 77068 beam screen shot
194093 10/31/09 21:53 Tang !!!!!!!!! Is this because of Hal...low....een night??????
194091 10/31/09 21:43 shichijo histogram check for run 77067
194090 10/31/09 21:35 maruta EHOD2-17 inefficiency recovered.
194089 10/31/09 21:31 bono 77067 target screen shot!!!!!!!
194087 10/31/09 21:28 shichijo FFB and Ion chamber screen!!
194086 10/31/09 21:26 maruta EHOD discriminator threshold reduced to -100mV from -200mV
194085 10/31/09 21:25 shichijo HDC/EDC HV screen shot (run 77067)
194084 10/31/09 21:25 bono 77067 beam screen shot
194081 10/31/09 20:59 shichijo histogram check for run 77066
194080 10/31/09 20:52 shichijo EHOD rate meter screen shot
194079 10/31/09 20:47 bono 77066 magnet screen shot
194078 10/31/09 20:46 bono 77066 beam screen shot
194074 10/31/09 20:31 shichijo EHOD rate meter screen shot
194073 10/31/09 20:20 shichijo this is EHOD test run
194071 10/31/09 20:13 shichijo stop run to check EHOD 17
194069 10/31/09 20:05 shichijo histogram check for run 77064
194068 10/31/09 19:54 bono 7706 magnet screen shot
194067 10/31/09 19:53 bono 77064 screen shot
194064 10/31/09 19:47 shichijo EHOD hit pattern change
194063 10/31/09 19:31 shichijo histogram check for run 77063
194061 10/31/09 19:14 bono 77063 magnet screen shot
194060 10/31/09 19:12 bono 77063 beam screenshot
194054 10/31/09 18:40 shichijo HDC/EDC HV screen shot
194050 10/31/09 17:57 bono 77061 magnet screen shot
194049 10/31/09 17:56 bono beam 77061 screen shot
194045 10/31/09 17:15 shichijo HDC/EDC HV screen shot(run 77060)
194044 10/31/09 17:15 bono beam screen shot
194043 10/31/09 17:14 shichijo HDC/EDC HV screen shot (run 77060)
194039 10/31/09 16:58 bono beam snapshot
194038 10/31/09 16:57 bono target snapshot
194037 10/31/09 16:52 Tang The enlarged band width and later drift
194036 10/31/09 16:47 bono magnet snapshot
194035 10/31/09 16:46 shichijo Visual scalers run#77059
194034 10/31/09 16:45 bono target controller snap shot
194033 10/31/09 16:44 bono magnet snapshot
194029 10/31/09 16:02 cdaq Beam Time Accounting
194028 10/31/09 15:56 chench Screenshot of Target controller and magnets controller
194027 10/31/09 15:56 csamanta Histogram check for run no. 77058
194026 10/31/09 15:54 chench Visual scalers run#77058
194024 10/31/09 15:51 chench day shift summary
194022 10/31/09 15:46 chench call to MCC because we miss one of SLI signal
194019 10/31/09 15:18 chench Visual scalers run#77057
194018 10/31/09 15:18 csamanta Histogram check for run no. 77057
194017 10/31/09 15:12 chench screenshot of target controller and magnet controller
194015 10/31/09 15:10 chench BPM and BCM for run#77056
194013 10/31/09 14:39 chench screenshot of target controller and magnets controller for run#77056
194012 10/31/09 14:38 chench The signal of BPM looks wider than normal
194011 10/31/09 14:36 chench Visual scalers run#77056
194010 10/31/09 14:35 csamanta Histogram check for run no. 77056
194007 10/31/09 14:29 chench BPM and BCM for run#77055
194004 10/31/09 13:53 chench Visual scalers run#77055
194003 10/31/09 13:53 csamanta Histogram check for run no. 77055
194002 10/31/09 13:46 chench screenshot of target controller and magnet controller for run77055
194000 10/31/09 13:42 chench ROC13 errors during ru#77054
193999 10/31/09 13:34 csamanta Histogram check for run no. 77054
193998 10/31/09 13:32 chench Visual scalers run#77054
193997 10/31/09 13:24 chench screenshot of target controller and magnets controller
193996 10/31/09 13:20 chench BPM and BCM at the beginning of 77054
193993 10/31/09 12:57 Reinhold Re: Energy lock was off since 9:28AM for about 1.5 hours
193992 10/31/09 12:45 csamanta Histogram check for run no. 77053
193991 10/31/09 12:45 chench Visual scalers run#77053
193990 10/31/09 12:41 chench screenshot for magnets controller and target controller for run#77053
193988 10/31/09 12:40 chench BPM and BCM for run#77052
193986 10/31/09 12:08 chench Visual scalers run#77052
193985 10/31/09 12:05 csamanta Histogram check for run no. 77052
193984 10/31/09 12:04 chench The DAQ rate of fission comes back to 170 after pump to 50mtorr and refill the gas to 2.24torr
193982 10/31/09 12:00 chench Screenshot of Target controller and magnet controll for run77052
193979 10/31/09 11:58 chench BPM and BCM at the end run of 77051
193977 10/31/09 11:25 csamanta Histogram check for run no. 77051
193976 10/31/09 11:24 chench Visual scalers run#77051
193974 10/31/09 11:20 chench screenshot of Target controller and magnet controller
193972 10/31/09 11:14 chench Visual scalers run#77050
193971 10/31/09 11:12 Tang Energy lock was off since 9:28AM for about 1.5 hours
193969 10/31/09 11:08 chench BPM becomes normal after call to MCC
193968 10/31/09 11:00 chench BPM at the middle of run#7705
193967 10/31/09 10:53 csamanta Histogram check for run no. 77050
193964 10/31/09 10:39 chench run#77049 end is failed, we got 4M data from this run
193963 10/31/09 10:36 chench BPM after beam tripped
193962 10/31/09 10:30 chench beam was tripped around 10mins from 10:20-10:30
193961 10/31/09 10:30 Tang 9th dipole NMR reading and Hall C Arc
193960 10/31/09 10:06 Reinhold HCNMR signal
193959 10/31/09 10:01 chench Visual scalers run#77049
193958 10/31/09 09:59 chench Screen shot of Target controller and magentes controller
193956 10/31/09 09:58 csamanta Histogram check for run no. 77049
193955 10/31/09 09:52 chench run77048 end run is failed , we got 4M events
193953 10/31/09 09:30 chench From run77047 we got around 2.4M events
193951 10/31/09 09:19 yez Visual scalers run#77048
193950 10/31/09 09:17 csamanta Histogram check for run no. 77048
193949 10/31/09 09:11 chench screenshot of HKS-HES magnets controller and target controller
193948 10/31/09 09:10 chench Screenshot of HV of DCs
193946 10/31/09 09:05 chench roc13 crashed
193943 10/31/09 09:03 chench Called MCC about about the of HCNMR and 9 th dipole
193941 10/31/09 08:46 csamanta Histogram check for run #77047
193940 10/31/09 08:42 yez bpm&bcm screen shot for run#77047
193939 10/31/09 08:41 yez Visual scalers run#77047
193936 10/31/09 08:20 cdaq Beam Time Accounting
193935 10/31/09 08:09 yez The value of IPM3C07 also dropped. MCC is discussing both of the problems
193934 10/31/09 08:04 xqiu run check for #77046
193933 10/31/09 08:01 yez bpm&bcm screen shot for run#77046->HallC 9th Dipole histogram still show problem
193932 10/31/09 07:59 yez Visual scalers run#77046
193928 10/31/09 07:44 yez Hall C 9th Dipole histogram shows problems. MCC is rebooting its IOC
193925 10/31/09 07:30 xqiu run check for #77045
193924 10/31/09 07:26 yez The histogram of HallC 9th dipole NMR looks too flat,Called MCC, they said it should be OK. IOC problem?
193923 10/31/09 07:23 xqiu target and magnet screen shot
193922 10/31/09 07:22 xqiu DC HV in the run #77045
193921 10/31/09 07:20 yez bpm&bcm screent shot for run#77045
193920 10/31/09 07:19 yez Visual scalers run#77045
193916 10/31/09 07:06 xqiu run check for #77044
193915 10/31/09 06:59 xqiu target andmagnets controller screen shot during the run #77044
193914 10/31/09 06:58 xqiu DC HV in run #77044
193913 10/31/09 06:34 yez Visual scalers run#77044
193912 10/31/09 06:33 yez bpm&bcm screen shot for run#77044
193909 10/31/09 06:08 xqiu run check for #77043
193908 10/31/09 05:54 xqiu target and magnets controller in run #77043
193907 10/31/09 05:54 yez bpm&bcm screen shot for run#77043
193906 10/31/09 05:53 yez Visual scalers run#77043
193905 10/31/09 05:53 xqiu DC HV in run #77043
193900 10/31/09 05:24 xqiu run check for #77042
193898 10/31/09 05:21 xqiu bpm &bcm screen shot during #77042
193897 10/31/09 05:18 yez Visual scalers run#77042
193896 10/31/09 05:10 xqiu DC HV in run #77042
193895 10/31/09 05:09 xqiu target and magnets controller in run #77042
193892 10/31/09 04:32 xqiu run check for #77041
193891 10/31/09 04:28 yez bpm&bcm screen shot for run#77041
193890 10/31/09 04:28 yez Visual scalers run#77041
193889 10/31/09 04:27 xqiu target and magnets controller in run #77041
193888 10/31/09 04:26 xqiu DC HV for run #77041
193883 10/31/09 03:55 xqiu run check for #77040
193882 10/31/09 03:48 xqiu DC HV in run #77040
193881 10/31/09 03:47 yez BPM&BCM screen shot for run#77040
193880 10/31/09 03:47 yez Visual scalers run#77040
193879 10/31/09 03:46 xqiu target and magnets controller in run #77040
193876 10/31/09 03:13 xqiu run check for #77039
193875 10/31/09 03:07 yez BPM&BCM screen shot for run#77039
193874 10/31/09 03:07 xqiu target and magnets controller in run #77039
193873 10/31/09 03:06 yez Visual scalers run#77039
193872 10/31/09 03:05 xqiu DC HV in run #77039
193868 10/31/09 02:42 xqiu run check for #77038
193866 10/31/09 02:32 xqiu DC HV in run #77038
193865 10/31/09 02:31 chench BCM and BPM for run#77038
193864 10/31/09 02:30 xqiu target and magnets controller during the run #77038
193863 10/31/09 02:30 yez Visual scalers run#77038
193860 10/31/09 01:58 xqiu run check for #77037
193859 10/31/09 01:50 yez BPM&BCM screen shot for run#77037
193858 10/31/09 01:50 yez Visual scalers run#77037
193857 10/31/09 01:49 xqiu DC HV for run #77037
193856 10/31/09 01:48 xqiu screen shot for target and magnets controller in run #77037
193854 10/31/09 01:43 yez ROC7 failed again. Try to reboot one more-->Run#77036 is JUNK
193852 10/31/09 01:39 yez ROC7 error->Reboot ROC7->Restart codamaster
193850 10/31/09 01:37 xqiu run check for #77035
193849 10/31/09 01:20 yez bpm&bcm screen shot for run#77035
193848 10/31/09 01:20 yez Visual scalers run#77035
193847 10/31/09 01:19 xqiu target and magnets controller screen shot in run 77035
193846 10/31/09 01:18 xqiu screen shot for DC HV in run #77035
193842 10/31/09 00:56 xqiu run check for #77034
193840 10/31/09 00:40 xqiu screen shot for target and magnets controller in run #77034
193839 10/31/09 00:38 yez Visual scalers run#77034
193838 10/31/09 00:37 yez BPM&BCM screen shot for run#77034
193837 10/31/09 00:37 xqiu screen shot for DC HV in run #77034
193834 10/31/09 00:08 yez bpm&bcm screen shot for run#77033
193833 10/31/09 00:06 cdaq Beam Time Accounting
193832 10/31/09 00:05 chench Swing shift summary
193831 10/31/09 00:04 xqiu run check for #77033
193830 10/31/09 00:03 chench Visual scalers run#77033
Friday
193829 10/30/09 23:58 chench BPM after MCC reboot the IOC
193826 10/30/09 23:52 chench IOC was lost and BPM just before target is unnormal
193825 10/30/09 23:43 csamanta Histogram check for run no. 77032
193824 10/30/09 23:35 chench Visual scalers run#77032
193823 10/30/09 23:34 chench BCM and BPM at the beginning of run77032
193819 10/30/09 23:04 csamanta Histogram check for run no. 77031
193817 10/30/09 22:56 chench Visual scalers run#77031
193815 10/30/09 22:47 chench BCM and BPM for run#77030
193813 10/30/09 22:38 csamanta Histogram check for run no. 77030
193812 10/30/09 22:12 chench Visual scalers run#77030
193810 10/30/09 22:08 chench BCM and BPM for run#77029
193808 10/30/09 21:51 csamanta Histogram check for run no. 77029
193807 10/30/09 21:38 chench Visual scalers run#77029
193806 10/30/09 21:37 chench Visual scalers run#77028
193804 10/30/09 21:29 chench BCM and BPM for run#77028
193800 10/30/09 21:01 csamanta Histogram check for run no. 77028
193799 10/30/09 20:58 chench BCM and BPM for run#77027
193798 10/30/09 20:53 chench end run77027 because of the error from ROC14 we got 3.4M events
193796 10/30/09 20:51 csamanta Histogram check for run no. 77027
193795 10/30/09 20:50 chench Roc14 crashed
193793 10/30/09 20:35 csamanta Correction:Histogram check for run no. 77026
193792 10/30/09 20:26 csamanta Histogram check for run no. 77026
193791 10/30/09 20:20 chench Visual scalers run#77027
193788 10/30/09 20:12 chench BCM and BPM for run#77026
193787 10/30/09 19:52 csamanta Histogram check for run no. 77025
193785 10/30/09 19:40 chench Visual scalers run#77026
193783 10/30/09 19:35 chench BCM and BPM for rn#77025
193780 10/30/09 19:09 chench Visual scalers run#77025
193779 10/30/09 19:02 chench BCM and BPM for run#77024
193776 10/30/09 18:38 csamanta Histogram check for run no. 77024
193775 10/30/09 18:27 chench Visual scalers run#77024
193774 10/30/09 18:21 chench BCM and BPM for run#77023
193769 10/30/09 18:06 chench beam energy lock and FFB were off for around ten mins during run#77023
193768 10/30/09 18:06 csamanta Histogram check for run no. 77023
193767 10/30/09 17:49 chench The visual scaler rate of HES is OK and from the camera the HES-D is alive
193766 10/30/09 17:48 chench Visual scalers run#77023
193764 10/30/09 17:42 chench end run77022 is failed
193763 10/30/09 17:40 chench BCM and BPM at the end of run#77022
193762 10/30/09 17:37 mack Unser electronics path (aka, ibcm3)
193761 10/30/09 17:37 chench HES-D Access Error
193760 10/30/09 17:23 csamanta Histogram check for run no. 77022
193759 10/30/09 17:20 chench Screenshot of HV for Drift chambers
193758 10/30/09 17:15 chench Visual scalers run#77022
193757 10/30/09 17:12 chench BCM and BPM at the end of run77021
193754 10/30/09 16:54 cdaq Beam Time Accounting
193753 10/30/09 16:38 chench During run#77021 there is around 20mins beam unstable (tripped+pulsed)
193752 10/30/09 16:05 saw Day shift summary
193751 10/30/09 16:05 Chiba Visual scalers and histograms for run#77021
193748 10/30/09 15:58 Chiba Fission chember`s gas was refilled. 3.67Torr -> 2.88Torr
193746 10/30/09 15:50 Chiba BPM screen shot
193744 10/30/09 15:40 Chiba AC3-1T ADC distribution change again and again...
193743 10/30/09 15:28 Chiba Visual scalers and histograms for run#77020
193740 10/30/09 15:12 Chiba AC3-1T ADC distribution change again...
193739 10/30/09 14:59 Chiba Visual scalers and histograms for run#77019
193738 10/30/09 14:45 Chiba 1X11+ recovered in run#77018
193737 10/30/09 14:44 saw Blank BPM is an IOC problem
193734 10/30/09 14:37 Chiba histgrams for run#77018
193733 10/30/09 14:28 chench BCM and BPM during the run#77018
193729 10/30/09 14:23 chench histogram check for run#77017
193728 10/30/09 14:22 chench 1y9- TDC comes back but 1x11+ TDC is missing during run#77017
193727 10/30/09 14:21 saw 3H03A and 3H03B BPMs blank on local display
193725 10/30/09 14:03 saw Run ended for hS1Y9- checkout
193722 10/30/09 13:53 Chiba 1Y9T TDC is strange
193720 10/30/09 13:39 Chiba Visual scalers and histograms for run#77016
193717 10/30/09 13:11 Reinhold Chaneg in Hall C ARC trajectory
193716 10/30/09 12:56 Chiba BPM & BCM screen shot
193715 10/30/09 12:46 Chiba Visual scalers and histograms for run#77015
193712 10/30/09 12:29 Chiba BPM & BCM screen shot
193711 10/30/09 12:26 Chiba Visual scalers and histgrams for run#77014
193709 10/30/09 12:13 Chiba Fission chember gas was refilled. 3.44Torr -> 2.84Torr
193708 10/30/09 12:05 yez Never mind...It looks 'normal' by looking at previous screen shots
193705 10/30/09 12:00 yez HES Q2 Field error?
193703 10/30/09 11:51 Chiba magnet & target controler screen shot
193702 10/30/09 11:32 Chiba histgram for run#77013
193701 10/30/09 11:31 Chiba BPM & BCM screen shot
193700 10/30/09 11:30 yez Here is the histograms for Run#77005 bad events
193699 10/30/09 11:28 yez I analyzed the last 40K events of run#77005, It looks like the HED Dipole already crashed before the end of the run#77005
193697 10/30/09 11:21 saw Beam off for MCC to restart FFB server
193695 10/30/09 11:17 Chiba histgram@for run#77012
193692 10/30/09 11:09 Chiba histgram@for run#77011
193691 10/30/09 10:35 Chiba Fission chember gas was refilled. 3.73Torr -> 2.90Torr
193686 10/30/09 10:05 Chiba BPM & BCM screen shot
193685 10/30/09 09:56 Chiba histgram@for run#77010
193682 10/30/09 09:44 xqiu sorry for upload the wrong runcheck file, re-upload here, I'm very sorry
193681 10/30/09 09:41 Chiba magnet & target screen shot
193680 10/30/09 09:22 maruta HKS-D field still increase after run77009 started
193679 10/30/09 09:16 Chiba histgram@for run#77009
193677 10/30/09 09:09 saw Dipoles cycled and run 77009 started
193675 10/30/09 09:03 saw Hall Entry: Reset HES-D and accidentally turned off HKS-D
193674 10/30/09 09:02 Tang Might be affected by beam check when beam recovered after couple of hours down
193673 10/30/09 08:58 yez HES Dipole crashed during this two runs(so they are JUNK)--> Asked Control Access to let Steve go down to turn off and on the power of HESD-->Beam Permit now-->Tomo now is cycling the HES Dipole&HKS Dipole
193672 10/30/09 08:55 saw HES Dipole tripped of around 6AM
193669 10/30/09 08:44 Chiba 77006&77007 hitpat is quit strange
193668 10/30/09 08:39 yez It is because HES Dipole crashed
193665 10/30/09 08:15 cdaq Beam Time Accounting
193664 10/30/09 08:14 yez Owl Shift Summery
193663 10/30/09 08:07 yez Lost Target BPM GUI, MCC said they need to reboot IOC
193660 10/30/09 07:51 yez Visual scalers for run#77007 ---> Rate looks lower for HES side after beam back,
193659 10/30/09 07:45 yez BPM&BCM screen shot for run#77007
193658 10/30/09 07:45 yez Beam is not stable for run#77007
193657 10/30/09 07:44 xqiu runcheck #77007
193656 10/30/09 07:39 xqiu target and magnets controller screen shot
193655 10/30/09 07:38 xqiu screen shot for DC HV during the run #77007
193652 10/30/09 07:36 yez MCC called: 8uA beam is back
193647 10/30/09 07:33 yez MCC called: Low current CW beam will be sent
193643 10/30/09 06:48 yez MCC called: Another one hour to get beam back, they need to fix the Electron-Gun problem
193642 10/30/09 06:05 yez MCC called to reboot IOC--No Beam for few minute
193638 10/30/09 05:12 xqiu runcheck #77005
193637 10/30/09 05:01 xqiu target and magnets controller during run #77005
193636 10/30/09 05:01 yez BPM&BCM for run#77005
193635 10/30/09 05:00 yez Visual scalers and histograms for run#77005
193634 10/30/09 05:00 xqiu DC HV in run #77005
193632 10/30/09 04:55 yez Run#77004: EB1error-End Run failed-Reboot Codamaster
193629 10/30/09 04:24 xqiu checklist for run #77004
193628 10/30/09 04:19 xqiu DC HV screen shot in the run #77004
193627 10/30/09 04:18 xqiu target and magnets controller screen shot in the run #77004
193626 10/30/09 04:16 yez BPM&BCM for run#77004
193625 10/30/09 04:15 yez Visual scalers and histograms for run#77004
193622 10/30/09 03:42 xqiu checklist for run #77003
193621 10/30/09 03:37 yez BPM&BCM for run#77003
193620 10/30/09 03:36 yez Visual scalers and histograms for run#77003
193619 10/30/09 03:36 xqiu screen shot for target controller and magnets conroller in run #77003
193618 10/30/09 03:34 xqiu screen shot for DC HV during run #77003
193615 10/30/09 03:14 xqiu checklist for run #77002
193612 10/30/09 02:56 yez BPM&BCM for run77002
193611 10/30/09 02:55 yez Visual scalers and histograms for run#77002
193610 10/30/09 02:55 xqiu target controller and magnets screen shot in run #77002
193609 10/30/09 02:54 xqiu DC HV screen shot in run #77002
193606 10/30/09 02:32 xqiu checklist for run #77001
193605 10/30/09 02:17 xqiu screen shot for DC HV in run #77001
193604 10/30/09 02:17 yez BPM&BCM screen for run#77001
193603 10/30/09 02:16 xqiu screen shot for target controller and magnets during the run #77001
193602 10/30/09 02:16 shichijo Visual scalers and histograms for run#77001
193600 10/30/09 02:11 yez codamaster error again- ROC1 lost - End Run failed-- Reboot ROC1
193597 10/30/09 01:44 xqiu checklist for run #77000
193596 10/30/09 01:28 yez BCM&BPM screen for run#77000
193595 10/30/09 01:27 shichijo Visual scalers and histograms for run#77000
193594 10/30/09 01:27 xqiu target controller and magnets screen shot for run #77000
193593 10/30/09 01:25 xqiu screen shot for DC HV In run #77000
193592 10/30/09 01:25 yez End Run failed. EB1 error. Reboot Codamaster
193590 10/30/09 00:58 xqiu checklist for run #76999
193589 10/30/09 00:51 yez Well, it is me...
193588 10/30/09 00:46 yez BPM&BCM screen for run#76999
193587 10/30/09 00:45 shichijo Visual scalers and histograms for run#76999
193586 10/30/09 00:44 xqiu screen shot for DC HV in run #76999
193585 10/30/09 00:43 xqiu screen shot for target controller and magnets during run #76999
193582 10/30/09 00:37 xqiu screen shot for target controller abd magnet in run #76998
193581 10/30/09 00:34 Reinhold Done moving E02017 ntuple and root files to /net/cdaqfs/scratch/cdaq/e02017/
193580 10/30/09 00:32 xqiu screen shot for DC HV in run #76998
193579 10/30/09 00:13 Reinhold Moving E02017 ntuple, hbook, and root files to /net/cdaqfs/scratch/cdaq/e02017/
193578 10/30/09 00:12 shichijo Visual scalers and histograms for run#76998
193577 10/30/09 00:09 chench correction: I Put the wrong sreenshot, here is the correct one
193576 10/30/09 00:09 shichijo ibcm3 returns strange value
193575 10/30/09 00:05 cdaq Beam Time Accounting
193573 10/30/09 00:03 chench swing shift summary
193572 10/30/09 00:02 Reinhold Disk usage in cdaq home directory; someone needs to clean up
193571 10/30/09 00:02 chench BPM for run#76697
Thursday
193567 10/29/09 23:49 yez Actually the X-Server of cdaql6 was restarted, which was crashed due to no space left
193566 10/29/09 23:45 shichijo HDC/EDC HV screen shot (run 76997)
193565 10/29/09 23:41 maruta Copy hbook and root files to scratch directory
193564 10/29/09 23:35 shichijo Visual scalers and histograms for run#76997
193563 10/29/09 23:34 chench after log out and log in again, coda works again
193562 10/29/09 23:31 shichijo Visual scalers and histograms for run#76996
193561 10/29/09 23:24 Reinhold CH reports CODA not running
193560 10/29/09 23:22 saw Scratch disk for ntuples
193558 10/29/09 22:58 shichijo Daq error ER1:cannot write event
193557 10/29/09 22:51 cdaq End of Run :
193554 10/29/09 22:12 shichijo FFB and ion chamber screen shot
193553 10/29/09 22:12 chench BCM and BMP after beam comes back (run#=76695)
193552 10/29/09 22:10 shichijo Visual scalers and histograms for run#76995
193551 10/29/09 22:07 shichijo HDC/EDC HV screen shot (run 76995)
193548 10/29/09 22:04 chench mcc called beam will come back soon
193547 10/29/09 21:46 chench We got 2.7M events from run#76994
193546 10/29/09 21:44 chench MCC called beam was lost because of some camera problems
193543 10/29/09 21:19 shichijo Visual scalers and histograms for run#76994
193542 10/29/09 21:18 chench We got 3.2M events from run#76993
193540 10/29/09 21:12 chench Roc7 crashed again
193538 10/29/09 20:53 shichijo magnets and target controller screen shot
193537 10/29/09 20:51 shichijo HDC/EDC HV screen shot (run 76993)
193536 10/29/09 20:50 shichijo Visual scalers and histograms for run#76993
193535 10/29/09 20:45 chench BCM and BPM for run#76992
193533 10/29/09 20:13 shichijo Visual scalers and histograms for run#76992
193529 10/29/09 20:05 chench BCM and BPMM and BPM for run#76991
193527 10/29/09 19:40 shichijo HDC / EDC HV screen shot (run76991)
193526 10/29/09 19:34 shichijo Visual scalers and histograms for run#76991
193523 10/29/09 19:24 chench BCM and BPM for run#76990
193522 10/29/09 18:51 shichijo Visual scalers and histograms for run#76990
193520 10/29/09 18:46 chench BCM and BPM for run#76990
193518 10/29/09 18:21 shichijo HDC / EDC HV screen shot (run 76989)
193517 10/29/09 18:16 shichijo Visual scalers and histograms for run#76989
193514 10/29/09 18:05 chen DAQ error:ER1 can not write events
193512 10/29/09 18:03 shichijo Visual scalers for run#76988 and run histogram checklist
193511 10/29/09 18:01 chench Screenshot for HV of DCs
193509 10/29/09 17:59 shichijo BCM and BPM for run#76987
193506 10/29/09 17:24 shichijo Visual scalers for run#76987 and run histogram checklist
193505 10/29/09 17:21 shichijo HDC / EDC HV screen shot. (run#76987)
193503 10/29/09 17:18 chench BCM and BPM at the end of run#76986
193501 10/29/09 16:55 shichijo histogram for run#76986
193500 10/29/09 16:54 Chiba day shift summury
193499 10/29/09 16:45 shichijo BPM and BCM snapshot (run#76986)
193498 10/29/09 16:42 shichijo Visual scalers for run#76986
193496 10/29/09 16:36 chench roc7 crashed
193494 10/29/09 16:28 cdaq Beam Time Accounting
193493 10/29/09 16:13 Chiba Fission chember gas is now refilled up to ~2.87 Torr
193491 10/29/09 16:12 Chiba check hists for run#76985
193490 10/29/09 16:10 Chiba Visual scalers for run#76985
193486 10/29/09 15:38 Chiba HDC & EDC current screen shot
193485 10/29/09 15:37 Chiba target and magnet control screen shot
193484 10/29/09 15:32 Chiba BPM & BCM screen shot
193483 10/29/09 15:30 Chiba check hists for run#76984
193482 10/29/09 15:29 Chiba Visual scalers for run#76984
193481 10/29/09 15:23 Chiba Run#76983 end with error
193479 10/29/09 14:52 Chiba BPM & BCM screen shot
193478 10/29/09 14:44 Chiba check hists for run#76983
193477 10/29/09 14:42 Chiba Visual scalers for run#76983
193476 10/29/09 14:39 Chiba symply we restarted
193475 10/29/09 14:32 Chiba Run 76982 ended due to ROC 11 error
193472 10/29/09 14:22 Chiba target and magnet control screen shot
193471 10/29/09 14:19 Chiba BPM and BCM screen shot
193470 10/29/09 14:18 Chiba check hists for run#76982
193469 10/29/09 14:16 Chiba Visual scalers for run#76982
193463 10/29/09 13:45 Chiba HDC & EDC current screen shot
193462 10/29/09 13:39 Chiba BPM & BCM screen shot
193461 10/29/09 13:33 Chiba check hists for run#76981
193460 10/29/09 13:32 Chiba Visual scalers for run#76981
193457 10/29/09 12:52 Chiba BPM screen shot for run#76980
193456 10/29/09 12:50 Chiba check hists for run#76980
193455 10/29/09 12:49 Chiba Visual scalers for run#76980
193452 10/29/09 12:18 Reinhold Checked for Hall A dithering: it is off
193451 10/29/09 12:18 Reinhold Checked for Hall A dithering: it is off
193450 10/29/09 12:14 Chiba BPM screen shot for run#76979
193449 10/29/09 12:09 Chiba check hists for run#76979
193448 10/29/09 12:09 Chiba Visual scalers for run#76979
193447 10/29/09 12:00 Chiba Fission chember gas is now refilled up to ~2.92 Torr
193443 10/29/09 11:57 Chiba HDC and EDC current screen shot
193441 10/29/09 11:38 Chiba current SLI monitor
193440 10/29/09 11:33 Chiba check hists for run#76978
193439 10/29/09 11:32 Chiba Visual scalers for run#76978
193438 10/29/09 11:23 Reinhold Re: BPM display file changed by someone?
193436 10/29/09 11:21 Chiba BPM screen shot for run#76978
193434 10/29/09 11:09 Chiba Re:BPM display file changed by someone?
193433 10/29/09 10:48 Chiba check hists for run#76977
193432 10/29/09 10:47 Chiba Visual scalers for run#76977
193431 10/29/09 10:44 Reinhold BPM display file changed by someone?
193429 10/29/09 10:34 Chiba check hists for run#76976
193427 10/29/09 10:24 Chiba HDC & EDC HV screen shot
193426 10/29/09 10:13 Chiba BPM minitor restarted
193425 10/29/09 10:09 Chiba Visual scalers for run#76976
193421 10/29/09 09:44 Chiba HDC & EDC HV screen shot
193420 10/29/09 09:40 Chiba BPM&BCM screen shot for run#76975
193419 10/29/09 09:32 Chiba Run #1576 (e02017) ended to refill heptan
193417 10/29/09 09:25 Chiba check hists for run#76975
193416 10/29/09 09:19 Chiba Visual scalers for run#76975
193414 10/29/09 09:11 Tang Beam stability
193412 10/29/09 09:09 Chiba BPM& BCM screen shot at 9:08
193411 10/29/09 08:57 Chiba magnet control and sieve slit screan shot for run76974
193410 10/29/09 08:49 Chiba check hists for run#76974
193409 10/29/09 08:43 Chiba BPM&BCM screen shot for run#76974
193408 10/29/09 08:41 Reinhold Re: Beam was not that stable in last one hour but not that bad. Ask MCC to keep eyes on it
193407 10/29/09 08:41 Reinhold Re: Beam was not that stable in last one hour but not that bad. Ask MCC to keep eyes on it
193406 10/29/09 08:37 Chiba Visual scalers for run#76974
193404 10/29/09 08:30 Reinhold Re: This is the BPM&BCM screen shot for run#76963 - Beam position looks not stable in last 80 minuts
193402 10/29/09 08:14 xqiu screen shot for target controller and magnets during run #76973
193401 10/29/09 08:12 cdaq Beam Time Accounting
193400 10/29/09 08:12 xqiu screen shot for DC HV in run #76973
193399 10/29/09 08:10 xqiu run check for #76973
193398 10/29/09 07:53 yez BPM&BCM screen shot for run#76973
193397 10/29/09 07:52 yez Visual scalers for run#76973
193392 10/29/09 07:17 xqiu run check for #76972
193391 10/29/09 07:11 xqiu screen shot for target controller and magnets during the run #76972
193390 10/29/09 07:10 yez BPM&BCM screen shot for run#76972
193389 10/29/09 07:09 yez Visual scalers for run#76972
193388 10/29/09 07:09 xqiu screen shot for DC HV during run #76972
193385 10/29/09 06:38 xqiu run check for #76971
193384 10/29/09 06:27 xqiu screen shot of DC HV in run #76971
193383 10/29/09 06:26 yez Visual scalers for run#76971
193382 10/29/09 06:26 xqiu target controller and magnets screen shot during run #76971
193379 10/29/09 06:19 yez Forgot to put the graph, here is
193378 10/29/09 06:18 yez Beam was not that stable in last one hour but not that bad. Ask MCC to keep eyes on it
193377 10/29/09 05:58 xqiu run check for #76970
193376 10/29/09 05:46 yez BPM&BCM screen shot for run#76970
193375 10/29/09 05:46 yez Visual scalers for run#76970
193374 10/29/09 05:45 xqiu target controller and magnets screen shot in run #76970
193373 10/29/09 05:44 xqiu screen shot for HV of DC during run #76970
193370 10/29/09 05:27 xqiu run check for #76969
193366 10/29/09 05:06 yez Visual scalers for run#76969
193365 10/29/09 05:06 xqiu screen shot for DC HV in run #76969
193364 10/29/09 05:05 xqiu target controller and magnets screen shot during run #76969
193363 10/29/09 05:05 yez BPM&BCM screen shot for run#76969
193360 10/29/09 04:42 xqiu run check for #76968
193359 10/29/09 04:34 yez BPM&BCM screen shot for run#76968
193358 10/29/09 04:33 yez Visual scalers for run#76968
193357 10/29/09 04:32 xqiu target controller and magnets screen shot for run #76968
193356 10/29/09 04:31 xqiu DC HV screen shot for run #76968
193354 10/29/09 04:29 yez restart codamaster failed due to ROC7 lost connection. Reboot ROC7
193353 10/29/09 04:24 yez ROC7 error- Restart codamaster
193352 10/29/09 04:16 xqiu run check for #76967
193351 10/29/09 03:59 yez Visual scalers for run#76967
193350 10/29/09 03:59 xqiu HV for DC screen shot
193349 10/29/09 03:58 xqiu target controller and magnets screen shot
193348 10/29/09 03:55 yez BPM&BCM screen shot for run#76967
193345 10/29/09 03:24 xqiu run check for #76966
193344 10/29/09 03:18 xqiu SS and Target controller screen shot
193342 10/29/09 03:16 yez BPM&BCM screen shot for run#76966
193341 10/29/09 03:16 xqiu screen shot for DC
193340 10/29/09 03:15 yez Visual scalers for run#76966
193338 10/29/09 03:01 Nue Water cell target pump was stopped and flow meter FSD was masked. H2O target cannot be used
193336 10/29/09 02:29 yez Controlled Access : Nue and Tomo will go into the hall and shut down water pump
193334 10/29/09 02:20 Nue Water flow is not essential for Cr runs
193333 10/29/09 02:16 xqiu run check for #76965
193332 10/29/09 02:11 yez BPM&BCM screen shot for #76965
193331 10/29/09 02:10 yez Visual scalers for run#76965
193330 10/29/09 02:09 xqiu screen shot for DC
193329 10/29/09 02:02 yez Water Fault again but recovered soon again. Beam is back. --Called Nue and Tang
193324 10/29/09 01:46 xqiu run check for #76964
193323 10/29/09 01:36 yez MCC called there is a Water fault near our splitter but soon it is clear. Is that an old issue?
193322 10/29/09 01:27 yez Target&Magnets' screen-shot
193321 10/29/09 01:25 yez DCs' HV screen-shot for run76964
193320 10/29/09 01:25 yez Visual scalers for run#76964
193317 10/29/09 01:16 yez This is the BPM&BCM screen shot for run#76963 - Beam position looks not stable in last 80 minuts
193316 10/29/09 01:14 xqiu run check for #76963
193315 10/29/09 01:12 yzz bppm
193314 10/29/09 00:48 xqiu screen shot for DC
193313 10/29/09 00:47 yez Visual scalers for run#76963
193310 10/29/09 00:24 xqiu run check for #76962
193309 10/29/09 00:16 yez Target and Magnets screen shot for run#76962
193308 10/29/09 00:15 yez HDC&EDC screen shot for run#76962
193307 10/29/09 00:13 yez Visual scalers for run#76962
193305 10/29/09 00:08 cdaq Beam Time Accounting
193303 10/29/09 00:08 maruta Shift summary, 10/28 Swing
Wednesday
193300 10/28/09 23:44 maruta HDC/EDC HV screen shot
193299 10/28/09 23:42 maruta Mag/sst controller screen shot
193298 10/28/09 23:40 maruta Visual scalers for run#76961
193297 10/28/09 23:32 maruta BPM/BCM screen shot
193295 10/28/09 22:49 maruta Visual scalers for run#76960
193292 10/28/09 22:10 maruta Visual scalers for run#76959
193289 10/28/09 21:42 maruta 3H004 (water flow) fault once
193287 10/28/09 21:33 maruta BPM/BCM screen shot
193285 10/28/09 21:13 vmaxwell Visual scalers for run#76958
193282 10/28/09 21:08 maruta beam back
193281 10/28/09 20:51 maruta Beam stop again for injector issue
193278 10/28/09 20:43 vmaxwell Visual scalers for run#76957
193276 10/28/09 20:37 maruta beam come back
193275 10/28/09 20:36 Chiba last figure
193273 10/28/09 20:31 Chiba Some comparison before and after power outage
193272 10/28/09 20:29 vmaxwell Visual scalers for run#76956
193271 10/28/09 20:25 maruta Injector problem again.
193268 10/28/09 20:24 chench Betabrite works properly
193264 10/28/09 19:40 maruta Beam back
193263 10/28/09 19:39 maruta mag/sst controller screen shot
193262 10/28/09 19:38 maruta HDC/EDC HV screen shot
193260 10/28/09 19:31 Tang Four working planes in EDC2
193258 10/28/09 18:21 maruta another 2 hours for recovery
193257 10/28/09 17:01 maruta mag/sst controller screen shot
193255 10/28/09 16:59 maruta Injector problem, it will recover within a few minutes hopefully.
193254 10/28/09 16:45 chench EDC2 comes back
193253 10/28/09 16:35 maruta Power permit now
193251 10/28/09 16:30 cdaq Beam Time Accounting
193250 10/28/09 15:26 Nue Controlled access
193249 10/28/09 14:35 saw Restarted betabrite display
193248 10/28/09 14:16 chench DOE TOUR, NO BEAM FOR AROUND ONE HOUR
193247 10/28/09 14:14 chench Beta Brite gives us wrong information
193244 10/28/09 14:10 chench This is visual scalers is for run#76954
193243 10/28/09 14:08 chench histogram check for run#76954
193241 10/28/09 14:02 chench Visual scalers for run#76953
193238 10/28/09 13:33 Chiba Comparison of before and after power outage (quick check)
193237 10/28/09 13:23 chench Visual scalers for run#76953
193236 10/28/09 13:15 chench histogram check for run#76953
193235 10/28/09 13:14 chench BPM and BCM at the beginning of run#76953 after the controlled access
193231 10/28/09 12:45 Gogami Hall C controlled access- iochlc3 down
193227 10/28/09 12:12 Gogami Fast FB and Magnet Controller screenshot
193226 10/28/09 12:11 Gogami DC HV screenshot[52Cr@8uA]
193225 10/28/09 12:09 chench histogram check for run#76952
193223 10/28/09 12:04 Gogami Visual scaler rate[52Cr@8uA/Run76952]
193219 10/28/09 11:32 Gogami Visual scaler rate[52Cr@8uA/Run76951]
193218 10/28/09 11:30 chench histogram check for run#76951
193217 10/28/09 11:26 Nue SLI screenshot
193216 10/28/09 11:24 chench BPM at the beginning of rrun#76951
193215 10/28/09 11:11 Gogami SLI works well now.
193213 10/28/09 11:09 chench extra events problem from roc13
193211 10/28/09 11:05 Nue Still EDC2 is off
193210 10/28/09 10:58 Gogami Magnets controller screenshot
193209 10/28/09 10:57 Gogami Fast FB and Ion chamber screenshot
193208 10/28/09 10:55 Gogami DC HVs screenshot[52Cr@8uA]
193207 10/28/09 10:52 chench histogram check for run#76950
193206 10/28/09 10:51 Gogami //Visual scaler rate[52Cr@8uA/Run76949] ==>//COIN: 1.86[ Hz] ==> 1584[ Hz]
193205 10/28/09 10:50 Nue EDC1 HVs are on
193204 10/28/09 10:49 Nue Water falut forDW2 or CO
193203 10/28/09 10:48 Gogami Visual scaler rate[52Cr@8uA/Run76950]
193200 10/28/09 10:01 Nue EDC1 HVs are off
193198 10/28/09 09:54 chench histogram check for run#76949
193196 10/28/09 09:53 Gogami Asked MCC, quick controlled access to see Drift chamber
193195 10/28/09 09:50 Gogami //Visual scaler rate[52Cr@8uA/Run76949]
193194 10/28/09 09:46 Nue SLI does not work properly
193191 10/28/09 09:31 Tang DAQ rate is fixed around 200Hz
193190 10/28/09 09:28 Nue Magnet, SS, target snapshot
193189 10/28/09 09:27 chench file for the histogram for run#76948
193188 10/28/09 09:26 Nue DAQ rate is now 1.8kHz
193187 10/28/09 09:19 chench histogram check for run#76948
193186 10/28/09 09:19 Gogami Fast FB and Ion Chambers screenshot
193185 10/28/09 09:18 Tang HKS target changed from BeO to Cr during this run 1562 - also super good photon position
193184 10/28/09 09:18 Gogami DC HVs screenshot[52Cr@8[uA]]
193183 10/28/09 09:14 Gogami Visual scaler rate[52Cr@8uA/Run76948]
193182 10/28/09 09:02 Gogami Target: Moved from BeO to 52Cr
193177 10/28/09 08:43 Gogami Target: Move to BeO
193176 10/28/09 08:12 Nue Controll access is canceled for now
193175 10/28/09 08:04 cdaq Beam Time Accounting
193174 10/28/09 07:28 yez Move out Beo to empty
193169 10/28/09 07:03 chench ROC1 is crashed
193168 10/28/09 06:58 yez 3uA tune beam is avaliable now
193165 10/28/09 06:50 chench HVs of EDC2 are tripped
193164 10/28/09 06:22 yez Ask Controlled Access: Chunhua goes down the hall to check EDC2 HV
193163 10/28/09 06:01 shichijo this run is empty target and no beam
193162 10/28/09 05:47 shichijo this run is empty target and no beam
193159 10/28/09 05:35 yez Beam: MCC called -> Beam may be ready in two hours
193158 10/28/09 05:30 yez EDC2 channels still have too high current and trip now. Called Chunhua and she is coming
193157 10/28/09 05:29 yez Fission DAQ freezes again so I kill the codamaster again.
193155 10/28/09 05:08 yez A late update about beam-->May be back in the morning
193154 10/28/09 05:04 yez Put all HVs on again but all EDC2 HVs can not be rampped up
193153 10/28/09 04:47 yez Turn off HDC&EDC HVs and EHodo HVs before manually turn Crate31&36 on and off
193150 10/28/09 04:26 yez EDC2 might has poblem
193149 10/28/09 04:19 yez Screen-shot for HDCs
193148 10/28/09 04:19 yez HDC&EDC screen-shot --> EDC2-F2 Overcurrent
193146 10/28/09 03:07 shichijo sorry, run# is 1558
193145 10/28/09 03:05 shichijo E02017: stop run 1559
193143 10/28/09 02:59 shichijo E02017 : DAQ was freezed when stop the Run #1559 -> Kill all
193140 10/28/09 01:40 shichijo MCC is now sweeping the Hall
193138 10/28/09 00:18 cdaq Beam Time Accounting
Tuesday
193136 10/27/09 23:29 maruta mag/sst controller screen shot
193135 10/27/09 23:27 maruta HDC/EDC HV screen shot
193134 10/27/09 22:57 Tang I drunk old tea all the time but never sick...
193133 10/27/09 22:44 Nue What Nue means...
193132 10/27/09 22:42 Nue We will have beam tomorrow even if no extension is approved
193131 10/27/09 22:32 Tang He is Hall B proved
193130 10/27/09 22:10 bono gogami down!
193129 10/27/09 21:56 saw How to Spell "Nue"
193127 10/27/09 21:47 Reinhold How to spell "Nue" ;-)
193126 10/27/09 21:43 Reinhold Re:Beam: Accelerator is waiting for pump
193124 10/27/09 19:53 Nue Beam: Accelerator is waiting for pump
193122 10/27/09 18:47 Gogami E02017 : DAQ was freezed when stop the Run #1555 .==> Kill all ==> looks recoverd
193120 10/27/09 18:14 Reinhold Run #76942: histograms look OK
193119 10/27/09 17:22 Reinhold Turned on some pumps in Hall C
193118 10/27/09 16:46 beaufait dw power supply
193117 10/27/09 16:43 Gogami Asked MCC to turn ON all magnet in Hall C.
193116 10/27/09 16:36 Reinhold Some pump in 3C17 area not on
193114 10/27/09 16:17 chench turn on all the HV
193113 10/27/09 16:16 Reinhold Set prescale pactors for cosmics (singles) and tunr off LED trigger
193110 10/27/09 16:07 Reinhold Restart pedestal trigger generator; DAQ starts taking data
193109 10/27/09 16:04 cdaq Beam Time Accounting
193107 10/27/09 15:55 Reinhold TS EN & TRGS not giving signals; reset TS
193101 10/27/09 15:41 Reinhold Turn on LED trigger as random trigger at ~ 100 Hz
193100 10/27/09 15:39 Reinhold Set hks09.flags to LED trigger
193099 10/27/09 15:33 Reinhold Checked all magnets
193098 10/27/09 15:27 Reinhold Call from Joe (answers page)
193097 10/27/09 15:19 xqiu the FFD DAQ is started right now
193096 10/27/09 14:56 saw Coda background tasks started on cdaql3 (Fission DAQ)
193095 10/27/09 14:46 xqiu problem for FFD DAQ
193094 10/27/09 13:56 Reinhold Power cycled HES Fastbus
193093 10/27/09 13:15 Nue HKS, HES sieve slits should not be moved.
193092 10/27/09 13:05 maruta HES-D PS fault
193091 10/27/09 12:56 Reinhold Started gas flow to wire chambers; all chambers bubbling
193090 10/27/09 11:32 saw DAQ status
193089 10/27/09 11:31 cdaq Beam Time Accounting
193088 10/27/09 10:18 xqiu HV crate 37 power supply has been replaced
193087 10/27/09 09:09 saw CAEN HV crate 37 won't turn on
193086 10/27/09 09:02 beaufait counting house ups
193085 10/27/09 08:35 saw Computer status
193084 10/27/09 08:20 yez Shift Summary: Power outage in the whole shift
193083 10/27/09 08:11 yez Power was back around 05:17
193082 10/27/09 06:38 yez MCC called that Power is back to normal and they are going to sweep the hall. I request a control access after sweeping
193081 10/27/09 06:09 yez And Back Again....
193080 10/27/09 06:08 yez Power Outage !!! Again!!!!!!!!!!!!
193079 10/27/09 05:47 Reinhold Smell seems to have subsided
193078 10/27/09 05:19 Reinhold Slight smell of smoke or hot electronics in electronics room
193077 10/27/09 05:15 yez A Elog from MCC -- limited power to support CHL and may need 8 hours to get power full recover
193076 10/27/09 05:11 maruta Updated
193075 10/27/09 04:12 yez Power is back but I don't know whether they fixed all problem or not, so we need to watch for a while before we turn on everything
193074 10/27/09 03:07 maruta Copy from the ELOG
193073 10/27/09 03:04 yez Update: MCC called that we need another 2~3 hours to get power back :<
193072 10/27/09 01:52 yez Keep on cdaqfs on counting house and second floor till the APC battery gone as Stew said
193071 10/27/09 01:38 shichijo turned off all NIM and FB crates
193070 10/27/09 01:37 maruta Turn off all CAEN HVs in G0 cage
193069 10/27/09 01:20 shichijo cdaq l2, l3, l6 shut down
193068 10/27/09 01:16 Reinhold Power outgage: some instructions
193067 10/27/09 01:00 Tang Another power outage - this one may kill this experiment
193066 10/27/09 00:46 Nue Power Outage Again
193065 10/27/09 00:45 yez All Gas have been turned off. No any update from MCC
193064 10/27/09 00:43 yez Power Outage!!! Everything is power off.
193063 10/27/09 00:34 yez ROC7 error while taking Run#76938 - Reboot Codamaster
193060 10/27/09 00:10 maruta Shift summary 10/26 swing
193059 10/27/09 00:01 cdaq Beam Time Accounting
Monday
193056 10/26/09 23:34 vmaxwell 8 uA (nominal) beam on 52 Cr target .... visual scalers run # 76936
193055 10/26/09 23:31 vmaxwell AC3 - 1T signal change again!
193052 10/26/09 23:11 vmaxwell shift takers: please keep in mind that helium is flowing from two tanks...
193051 10/26/09 23:08 maruta BPM/BCM screen shot while Run76935
193050 10/26/09 22:51 vmaxwell 8 uA (nominal) beam on 52 Cr target .... visual scalers run # 76933 -76935 ...event rate back up!
193046 10/26/09 22:23 Chiba AC3-1T ADC distribution change?
193043 10/26/09 21:35 vmaxwell 8 uA (nominal) beam on 52 Cr target .... visual scalers run # 76933... event rate decreasing!?!
193042 10/26/09 21:19 maruta magnet and sst controller screen shot
193041 10/26/09 21:17 maruta BPM/BCM screen shot
193038 10/26/09 20:55 vmaxwell 8 uA (nominal) beam on 52 Cr target .... visual scalers run # 76932
193031 10/26/09 19:43 vmaxwell 8 uA (nominal) beam on 52 Cr target .... visual scalers run # 76930
193030 10/26/09 19:37 vmaxwell AC3- 1T funny signal
193028 10/26/09 19:20 maruta BPM/BCM screen shot
193026 10/26/09 18:58 vmaxwell 8 uA (nominal) beam on 52 Cr target .... visual scalers run # 76929
193025 10/26/09 18:56 maruta HDC/EDC HV screen shot
193024 10/26/09 18:49 maruta magnet, sst controller screen shot
193021 10/26/09 18:34 vmaxwell 8 uA (nominal) beam on 52 Cr target .... visual scalers run # 76928
193016 10/26/09 17:43 vmaxwell 8 uA (nominal) at 52 Cr .... run# 76927
193015 10/26/09 17:42 maruta magnet, target and sieve slit controller screen shot
193012 10/26/09 17:20 vmaxwell 8 uA (nominal) beam to 52 Cr target ... visual scalers run # 76926
193011 10/26/09 16:53 maruta BPM/BCM screen shot
193010 10/26/09 16:52 maruta EDC/HDC HV screen shot
193007 10/26/09 16:26 vmaxwell 8 uA (nominal) at 52 Cr target .. Run#76925 viual scaler rates
193006 10/26/09 16:25 vmaxwell 8 uA (nominal) at 52 Cr target .. Run#76925 viual scaler rates
193002 10/26/09 16:06 Gogami Shift_summury[Day-26Oct2009]
193001 10/26/09 16:06 cdaq Beam Time Accounting
192999 10/26/09 15:49 maruta PS current information exists but every 30sec
192998 10/26/09 15:37 Gogami Fast FB and Magnet controller screenshot
192997 10/26/09 15:37 seva Run#76924 viual scaler rates
192996 10/26/09 15:36 Gogami DC HVs screenshot[52Cr@8uA]
192995 10/26/09 15:36 seva BPM&BCM screens
192990 10/26/09 15:02 seva Run#76923 viual scaler rates
192989 10/26/09 15:01 Gogami Fast FB and Ion chambers screenshot
192988 10/26/09 15:00 Gogami DC HVs screenshot[52Cr@8uA]
192987 10/26/09 15:00 seva BPM&BCM screens
192983 10/26/09 14:22 seva Run#76922 viual scaler rates
192982 10/26/09 14:21 Gogami Fast FB and Magnet controller screenshot
192981 10/26/09 14:20 Gogami DC HVs screenshot[52Cr@8uA]
192977 10/26/09 13:38 seva BCM&BPM screens
192976 10/26/09 13:37 seva Run#76921 viual scaler rates
192975 10/26/09 13:35 Gogami Fast FB and Ion chambers screenshot
192974 10/26/09 13:34 Gogami DC HVs screenshot[52Cr@8uA]
192971 10/26/09 13:03 seva BCM&BPM screens
192970 10/26/09 13:02 seva Run#76920 viual scaler rates
192969 10/26/09 13:00 Gogami Fast FB and Ion chambers control screenshot
192968 10/26/09 12:59 Gogami DC HVs screenshot
192963 10/26/09 12:24 seva BCM&BPM screens
192962 10/26/09 12:23 Gogami Fast FB and Magnet controller screenshot
192961 10/26/09 12:23 seva Run#76919 viual scaler rates
192959 10/26/09 12:22 Gogami DC HVs screenshot[52Cr@8uA]
192957 10/26/09 12:11 cdaq Beam Time Accounting
192956 10/26/09 12:08 cdaq Beam Time Accounting
192954 10/26/09 11:48 seva BPM&BCM screens
192953 10/26/09 11:47 seva Run#76918 viual scaler rates
192951 10/26/09 11:45 Gogami Fast FB and HKS Grphical Layout screenshot
192950 10/26/09 11:44 Gogami DC HVs screenshot[52Cr@8uA]
192947 10/26/09 11:27 Nue Analysis: Run76911 has ED field until 8:03
192946 10/26/09 11:12 seva BCM&BPM screens
192945 10/26/09 11:11 seva Run#76917 viual scaler rates
192944 10/26/09 11:10 Nue Late entry : I power cycled HES-D PS
192943 10/26/09 11:09 Gogami Fast FB and Ion chambers control screenshot
192942 10/26/09 11:08 Gogami DC HVs screenshot[52Cr@8uA]
192937 10/26/09 10:35 seva Run#76916 viual scaler rates
192936 10/26/09 10:32 Gogami Fast FB and Magnet controller screenshot
192935 10/26/09 10:31 seva BCM&BPM screens
192934 10/26/09 10:31 Gogami DC HVs screenshot[52Cr@8uA]
192931 10/26/09 10:13 seva Run#76915 viual scaler rates
192930 10/26/09 10:09 Reinhold Re: Beam: Called MCC and they are trying to re-lock the BPMs
192928 10/26/09 09:57 Gogami Fast FB and Ion chambers screenshot
192926 10/26/09 09:56 Gogami DC HVs screenshot[52Cr@8uA]
192923 10/26/09 09:39 Gogami DC HVs screenshot[52Cr@8uA]
192922 10/26/09 09:38 Gogami Fast FB and Ion chambers control screenshot
192921 10/26/09 09:37 Gogami HKS HES magnet controller screenshot(after HES-D was recovered)
192920 10/26/09 09:27 seva BPM&BCM screens
192919 10/26/09 09:26 seva Run#76914 viual scaler rates
192916 10/26/09 09:20 Gogami Beam is back
192914 10/26/09 08:56 Gogami Hall C is going to controlled access to work on HES-D power suply.
192911 10/26/09 08:51 seva this run started OK at some point rates droppped
192910 10/26/09 08:50 seva JUNK due to HES failure and 90% drop in HES single rates
192909 10/26/09 08:49 Gogami HES HKS magnet controller screenshot (after some operation)
192906 10/26/09 08:48 seva apparently HES dipole is OFF
192905 10/26/09 08:46 Gogami Visual scaler rate[52Cr@8uA] ==>DAQ rate
192904 10/26/09 08:37 Gogami HES HKS magnet control screenshot
192903 10/26/09 08:36 seva 90% drop in HES rates
192902 10/26/09 08:31 Gogami Visual scaler rate[52Cr@8uA] ==> HES side rate dropped !
192901 10/26/09 08:31 Gogami Visual scaler rate[52Cr@8uA] ==> HES side rate dropped !
192899 10/26/09 08:13 Gogami Faset FB control and HKS Graphical Layout screenshot
192897 10/26/09 08:11 Gogami DC HVs screenshot[ 52Cr@8[uA] ]
192895 10/26/09 08:02 cdaq Beam Time Accounting
192892 10/26/09 07:37 shichijo run check (run#76911)
192891 10/26/09 07:29 yez BPM&BCM screen shot for run#76911
192890 10/26/09 07:29 yez visual scaler rate (run#76911)
192889 10/26/09 07:28 shichijo HDC & EDC screen shot (run#76911)
192886 10/26/09 07:01 shichijo HDC & EDC screen shot
192884 10/26/09 06:57 shichijo run check (run#76910)
192883 10/26/09 06:56 shichijo run check (run#76910)
192882 10/26/09 06:48 shichijo Refill gas for Fission chamber.
192881 10/26/09 06:48 yez BPM&BCM screen shot for run#76910
192880 10/26/09 06:47 yez visual scaler rate (run#76910)
192876 10/26/09 06:20 shichijo run check (run#76909)
192875 10/26/09 06:19 shichijo run check (run#76909)
192874 10/26/09 06:19 shichijo run check (run#76909)
192873 10/26/09 06:14 yez visual scaler rate (run#76907)
192872 10/26/09 06:12 shichijo HDC & EDC screen shot
192871 10/26/09 06:12 yez MCC sent beam back after rebooting IOC20, things look normal now
192869 10/26/09 06:02 shichijo stop run and MCC reboot IOC
192868 10/26/09 05:58 yez MCC called to take beam away and going to reboot IOC20 since Target BPMs lost communication
192866 10/26/09 05:53 shichijo Visual Scalers for run#76908
192865 10/26/09 05:46 yez Here is the new BPM&BCM screen shot after calling MCC
192864 10/26/09 05:44 yez Beam: Called MCC and they are trying to re-lock the BPMs
192863 10/26/09 05:41 shichijo HDC and EDC screen shot
192862 10/26/09 05:40 shichijo Fast FB and Ion chambers screen shot (run#76908)
192861 10/26/09 05:38 shichijo run 76907 was ended because beam become unstable.
192859 10/26/09 05:27 shichijo run check (run#76907)
192858 10/26/09 05:25 yez BPM&BCM screen shot -- Same offsets!
192857 10/26/09 05:17 yez BPM&BCM screen shot for run#76907
192856 10/26/09 05:16 yez visual scaler rate (run#76907)
192855 10/26/09 05:15 shichijo HDC & EDC screen shot (run#76907)
192850 10/26/09 04:47 shichijo run check (run#76906)
192849 10/26/09 04:42 yez BPM&BCM screen shot for run#76906
192848 10/26/09 04:40 yez visual scaler rate (run#76906)
192847 10/26/09 04:40 shichijo HDC & EDC screen shot (run#76096)
192844 10/26/09 04:14 shichijo run check (run#76905)
192843 10/26/09 04:09 yez BPM&BCM screen shot for run#76905
192842 10/26/09 04:08 shichijo run check (run#76904)
192841 10/26/09 04:08 yez visual scaler rate (run#76905)
192840 10/26/09 04:04 yez Codamaster error at run#76904,ER1 cannot write events
192837 10/26/09 03:51 shichijo Refill gas for Fission chamber.
192835 10/26/09 03:49 yez BPM&BCP screen shot for run#76904
192834 10/26/09 03:49 yez visual scaler rate (run#76904)
192833 10/26/09 03:47 shichijo Fast FB and Ion Chambers screen shot
192832 10/26/09 03:46 shichijo HDC & EDC screen shots (run#76904)
192831 10/26/09 03:45 yez reboot codamaster after 76903
192828 10/26/09 03:27 shichijo run check (run#76903)
192827 10/26/09 03:11 yez BCP&BPM screen shot for run#76903
192826 10/26/09 03:10 yez visual scaler rate (run#76903)
192825 10/26/09 03:10 shichijo HDC & EDC screen shots (run#76903)
192822 10/26/09 02:48 shichijo run check (run#76902)
192821 10/26/09 02:35 yez BPM&BCM screen shot for run#76902
192820 10/26/09 02:35 yez visual scaler rate (run#76902)
192819 10/26/09 02:34 shichijo HDC & EDC screen shots (run#76902)
192814 10/26/09 02:07 shichijo run check (run#76901)
192813 10/26/09 01:54 shichijo EDC & HDC screen shots (run#76901)
192812 10/26/09 01:53 yez BPM&BCM for run#76901
192811 10/26/09 01:53 yez visual scaler rate (run#76901)
192808 10/26/09 01:21 shichijo checklist for run#76900
192807 10/26/09 01:14 yez BPM&BCM screen shot for run76900
192806 10/26/09 01:13 yez visual scaler rate (run#76900)
192805 10/26/09 01:12 shichijo EDC & HDC screen shots (run#76900)
192801 10/26/09 00:54 yez run check for run 76899
192800 10/26/09 00:53 shichijo Refill gas for Fission chamber
192798 10/26/09 00:37 shichijo visual scaler rate (run#76899)
192795 10/26/09 00:26 shichijo visual scaler rate (run#76898)
192794 10/26/09 00:25 yez BPM&BCM screen shot for run#76898
192793 10/26/09 00:23 yez HDC&EDC HV screen shot for run#76898
192792 10/26/09 00:13 kawama Swing shift summary
192791 10/26/09 00:07 cdaq Beam Time Accounting
192790 10/26/09 00:06 kawama 2X-5T problem; Cable connection was wrong
192789 10/26/09 00:00 vmaxwell double peak gone
Sunday
192787 10/25/09 23:55 Chiba palse form of 2X5T
192782 10/25/09 23:29 kawama double peak in 2x-5B
192777 10/25/09 22:57 Reinhold Re: double peak in tof persists
192774 10/25/09 22:44 vmaxwell double peak in tof persists
192771 10/25/09 22:35 vmaxwell double peak in time of flight counter back
192768 10/25/09 22:22 kawama EDC & HDC screen shot
192767 10/25/09 22:21 kawama BPM & BCM screen shot
192766 10/25/09 22:20 kawama Visual Scalers for run# 76890 beam current 8.0uA, target 52Cr
192761 10/25/09 21:45 kawama EDC & HDC screen shot
192760 10/25/09 21:44 kawama Visual Scalers for run# 76889 beam current 8.0uA, target 52Cr
192759 10/25/09 21:43 kawama BCM & BPM screen shot
192756 10/25/09 21:01 kawama run76887; terminated because of ROC11 failure
192755 10/25/09 21:00 kawama This is run76885
192754 10/25/09 21:00 kawama This is run76886
192753 10/25/09 20:59 kawama This is run76887
192751 10/25/09 20:49 kawama EDC & HDC screen shot
192750 10/25/09 20:49 kawama BCM & BPM screen shot
192749 10/25/09 20:48 kawama Visual Scalers for run# 7688ļ¼ beam current 8.0uA, target 52Cr
192744 10/25/09 20:26 Reinhold Re: BPM is exactly same (all runs in this condition suspect)
192743 10/25/09 20:09 kawama EDC & HDC screen shot
192742 10/25/09 20:08 kawama BCM & BPM screen shot
192741 10/25/09 20:07 kawama Visual Scalers for run# 76883 beam current 8.0uA, target 52Cr
192738 10/25/09 19:52 kawama BPM fixed
192737 10/25/09 19:27 kawama Visual Scalers for run# 76882 beam current 8.0uA, target 52Cr
192733 10/25/09 19:14 kawama BPM is exactly same
192731 10/25/09 18:47 kawama ER1 failed becasue /home of cdaql6 was full
192729 10/25/09 18:42 kawama Moved root files under /net/cdaqfs/scratch/cdaq/hks09/
192728 10/25/09 18:40 shoh The comparison for SS=-330 & =-300 mm run (Cr target)
192727 10/25/09 18:34 kawama ER1 failed during run76881
192726 10/25/09 18:27 kawama EDC & HDC screen shot
192725 10/25/09 18:26 kawama BPM & BCM screen shot
192724 10/25/09 18:26 kawama Visual Scalers for run# 76881 beam current 8.0uA, target 52Cr
192721 10/25/09 17:48 kawama EDC & HDC screen shot
192720 10/25/09 17:47 kawama Visual Scalers for run# 76880 beam current 8.0uA, target 52Cr
192719 10/25/09 17:46 kawama BPM & BCM screen shot
192714 10/25/09 17:13 kawama Visual Scalers for run# 76878 beam current 8.0uA, target 52Cr
192713 10/25/09 17:11 kawama BPM &BCM screen shot
192712 10/25/09 17:10 kawama EDC & HDC screen shot
192709 10/25/09 16:44 vmaxwell double peak gone
192708 10/25/09 16:42 kawama The signal of 2X-5B was fixed at run76878
192707 10/25/09 16:41 kawama Visual Scalers for run# 76878 beam current 8.0uA, target 52Cr
192706 10/25/09 16:33 kawama 2x-5B signal has been strange during 76877
192703 10/25/09 16:23 kawama BPM & BCM screen shot
192702 10/25/09 16:22 kawama EDC & HDC screen shot
192701 10/25/09 16:20 vmaxwell strange double peak in time of flight counter
192700 10/25/09 16:15 kawama Visual Scalers for run# 76877 beam current 8.0uA, target 52Cr
192698 10/25/09 16:07 cdaq Beam Time Accounting
192693 10/25/09 15:55 bono run check #76786
192692 10/25/09 15:52 shoh sorry, rate was too complex to see
192691 10/25/09 15:48 shoh CH2 target comparison (before and after power down)
192690 10/25/09 15:38 bono run check for run 76875
192689 10/25/09 15:28 chench Visual Scalers for run# 76876
192687 10/25/09 15:22 chencn BCM and BPM for run#76875
192685 10/25/09 14:56 chench Visual Scalers for run# 76875
192682 10/25/09 14:44 chench BPM for run#76874
192681 10/25/09 14:42 Reinhold SVN COMMIT: special map for run 76871 only
192680 10/25/09 14:13 chench Visual Scalers for Run# 76874
192679 10/25/09 14:11 Reinhold AC3 ADC connector set wrong for run 76871, but not before
192677 10/25/09 14:09 chench Beam comes back
192676 10/25/09 13:56 chench End the run because the beam tripped
192675 10/25/09 13:55 chench MCC called beam will be tripped for around 5mins
192670 10/25/09 13:17 chench Visual scalers is around 10% less than previous runs
192669 10/25/09 13:16 chench Visual Scalers for Run# 76872
192667 10/25/09 13:13 chench Refill gas for Fission chamber
192662 10/25/09 12:56 chench BCM and BPM for run#76871
192661 10/25/09 12:31 chench Visual Scalers for Run# 76871
192660 10/25/09 12:21 bono signal looks ok
192655 10/25/09 12:10 chench BCM and BPM for run#76869
192654 10/25/09 11:44 chench Visual Scalers for Run# 76868
192653 10/25/09 11:41 chench AC3-1T is missing
192652 10/25/09 11:36 bono run check for run 76869
192651 10/25/09 11:35 bono checked the cables
192648 10/25/09 11:01 chench run check for run#76868
192647 10/25/09 10:52 chench Visual Scalers for Run# 76868
192646 10/25/09 10:51 Reinhold Re: AC 3-1T ADC missing
192643 10/25/09 10:47 chench BCM and BPM for run#76867
192642 10/25/09 10:38 Reinhold Re: MCC called IOCHLC3 need to reboot, but they can not find where it is
192640 10/25/09 10:17 chench Refill gas for fission chamber
192637 10/25/09 10:09 chench Visual Scalers for Run# 76867
192636 10/25/09 10:09 bono run check for run 76867
192633 10/25/09 10:02 chench BCM and BPM for run#76866
192631 10/25/09 09:29 chench Visual Scalers for Run# 76866
192630 10/25/09 09:28 bono run check for run 76866
192629 10/25/09 09:27 bono run check for run 76865
192626 10/25/09 09:14 chench BCM and BPM for run#76865
192625 10/25/09 08:52 chench Visual Scalers for Run# 76865
192622 10/25/09 08:36 bono run check for run 76864
192619 10/25/09 08:21 chench Visual Scalers for Run# 76864
192616 10/25/09 08:06 cdaq Beam Time Accounting
192615 10/25/09 07:43 xqiu run check for 76863
192614 10/25/09 07:34 yez HDC&EDC HV screen for run#76863
192613 10/25/09 07:33 yez BCM&BPM screen for run#76863
192612 10/25/09 07:33 yez Visual Scalers for Run# 76863
192608 10/25/09 07:16 xqiu run check #76862
192606 10/25/09 06:58 yez HDC&EDC HV screen for run76862
192605 10/25/09 06:57 yez BPM&BCM screen for run#76862
192604 10/25/09 06:56 yez Visual Scalers for Run# 76862
192601 10/25/09 06:32 xqiu checklist for run #76861
192600 10/25/09 06:20 yez Visual Scalers for Run# 76861
192599 10/25/09 06:18 yez HDC&EDC HV for run#76861
192598 10/25/09 06:16 yez BPM&BCM screen for run#76861
192595 10/25/09 06:02 xqiu run check #76860
192594 10/25/09 05:37 yez HDC&EDC HV for run#76860
192593 10/25/09 05:36 yez BPM&BCM screen for run76860
192592 10/25/09 05:35 yez Visual Scalers for Run# 76860
192587 10/25/09 05:05 xqiu run check #76859
192586 10/25/09 04:52 yez HDC&EDC for run#76859
192584 10/25/09 04:50 yez BCM&BPM for run#76859
192581 10/25/09 04:32 xqiu run check #76858
192578 10/25/09 04:15 yez Visual Scalers for Run# 76858
192577 10/25/09 04:13 yez BPM&BCM screen for run#76858
192575 10/25/09 03:49 xqiu run check #76857
192574 10/25/09 03:38 yez HDC&EDC HV screen for run#76857
192573 10/25/09 03:37 yez Visual Scalers for Run# 76857
192571 10/25/09 03:34 yez BPM&BCM screen for Run76857
192569 10/25/09 03:16 yez Analysis: Some quick analysis results for new CH2 data (Run#76813~76824)
192568 10/25/09 03:14 xqiu checklist for run #76855 and #76856
192567 10/25/09 03:02 yez HDC&EDC Screen for run#76856
192566 10/25/09 03:01 yez Visual Scalers for Run# 76856
192565 10/25/09 03:00 yez BCM&BPM Screem for run#76856
192559 10/25/09 02:41 Chiba ratio of good particle vs bad prticle before and after power outage
192558 10/25/09 02:24 yez BPM&BCM for Run#76855
192557 10/25/09 02:23 yez HDC&EDC HV for Run#76855
192556 10/25/09 02:23 yez Visual Scalers for Run# 76855
192555 10/25/09 02:19 yez Run#76854 End Run fail, reboot codamaster
192554 10/25/09 02:18 Chiba AC 3-1T ADC missing
192553 10/25/09 02:17 yez Reboot codamaster due to EB1 disconnect
192552 10/25/09 02:15 xqiu During the run #76853 and #76854 , the HAC3-1 raw adc looks strange
192549 10/25/09 01:36 yez Visual Scalers for Run# 76854
192548 10/25/09 01:33 yez HDC&EDC for Run#76854
192547 10/25/09 01:33 yez BPM&BCM for Run#76854
192545 10/25/09 01:30 yez ROC13 Rebooted due to many extra events
192542 10/25/09 01:04 xqiu checklist for run #76853
192540 10/25/09 00:59 yez HDC&EDC HV Screen for 76853
192539 10/25/09 00:58 yez Visual scaler rate run76853
192538 10/25/09 00:54 yez BPM&BCM
192536 10/25/09 00:52 yez Beam is back
192535 10/25/09 00:42 Nue Beam: IOC was rebooted successfully. Hall goes to beam permit
192534 10/25/09 00:14 Nue Power cycle does not solve the problem, Hall will go to controlled access
192533 10/25/09 00:05 yez MCC called IOCHLC3 need to reboot, but they can not find where it is
192532 10/25/09 00:04 cdaq Beam Time Accounting
Saturday
192530 10/24/09 23:56 kawama Swing shift summary
192529 10/24/09 23:50 kawama bcm & bpm screen shot
192528 10/24/09 23:48 kawama During this run, beam is very unstable
192527 10/24/09 23:46 kawama This is run76852
192526 10/24/09 23:33 kawama bcm & bpm screen shot
192525 10/24/09 23:26 kawama Visual scaler rate run76849
192524 10/24/09 23:25 kawama EDC & HDC screen shot
192522 10/24/09 23:17 shoh HES momentum dipendence for collimetor position
192521 10/24/09 22:57 kawama This is run76851
192519 10/24/09 22:51 vmaxwell ethane bottle changed
192518 10/24/09 22:50 kawama EDC & HDC screen shot
192517 10/24/09 22:49 kawama Visual scaler rate run76849
192516 10/24/09 22:47 kawama bcm & bpm screen shot
192512 10/24/09 22:19 kawama Vsual scaler rate run76850
192511 10/24/09 22:19 kawama Vsual scaler rate run76850
192510 10/24/09 22:15 kawama EDC & HDC screen shot
192509 10/24/09 22:14 vmaxwell re: run # 76849 ...beam current @ 7.5 uA
192508 10/24/09 22:14 kawama bcm & bpm screen shot
192505 10/24/09 21:38 kawama Visual scaler rate run76849
192504 10/24/09 21:37 kawama collimator position of run76849 run info is wrong
192503 10/24/09 21:31 kawama bcm & bpm screen shot
192502 10/24/09 21:30 kawama EDC & HDC screen shot
192499 10/24/09 21:22 Nue HES Collimator Position move up to -330.20mm
192497 10/24/09 21:09 kawama Change collomator position
192494 10/24/09 20:36 kawama bcm & bpm screen shot
192493 10/24/09 20:33 kawama EDC & HDC screen shot
192492 10/24/09 20:33 kawama Visual scaler rate run76847
192489 10/24/09 20:18 kawama Visual scaler rate run76846
192486 10/24/09 19:51 chench change the HV of HDC1 from 1970V to 1920V during run#76845.
192485 10/24/09 19:49 kawama run76845 ROC14 error
192484 10/24/09 19:46 kawama bpm & bcm screen shot
192483 10/24/09 19:45 chench screen shot of HV of DCs
192482 10/24/09 19:44 chench The leakage current of drift chambers before change the HV
192481 10/24/09 19:41 kawama HDC HV current increased
192480 10/24/09 19:40 vmaxwell run # 76845 HDC raw TDC
192479 10/24/09 19:37 kawama This is rate for run76845, 7.0uA
192478 10/24/09 19:34 kawama HDC & EDC screen shot
192477 10/24/09 19:33 kawama This is rate for run76845, 7.5uA
192476 10/24/09 19:32 kawama This is rate for run76844
192475 10/24/09 19:32 kawama Visual scaler rate run76845
192474 10/24/09 19:30 vmaxwell run # 76845 beam current changed
192473 10/24/09 19:29 kawama Changed to Cr target
192472 10/24/09 19:28 vmaxwell Re: Re: Fast FB and Ion chambers control screenshot
192471 10/24/09 19:25 kawama Visual scaler rate run76843
192469 10/24/09 19:16 kawama We will change target and ps factor from run76845
192468 10/24/09 19:15 Reinhold Re: Fast FB and Ion chambers control screenshot
192466 10/24/09 19:12 maruta hcpc10401 connection was closed
192465 10/24/09 18:56 Tang Total C data, 20uA runs and overall
192463 10/24/09 18:32 kawama bpm & bcm screen shot
192462 10/24/09 18:19 kawama EDC & HDC screen shot
192461 10/24/09 18:16 kawama Visual scaler rate run76843
192458 10/24/09 17:51 Nue Comments on Shoh's analysis
192457 10/24/09 17:51 kawama EDC & HDC screen shot
192456 10/24/09 17:51 shoh revision of S/N ratio at 10uA run
192455 10/24/09 17:46 kawama Visual scaler rate run76843
192454 10/24/09 17:37 Nue Run76097 was 35uA Carbon, not 10uA
192451 10/24/09 17:11 shoh The S/N ratio in several carbon run (present run is better than old run)
192449 10/24/09 16:42 kawama bpm screen shot
192447 10/24/09 16:19 kawama Visual scaler rate run76842
192443 10/24/09 16:11 kawama I will change ps factor from run 76841
192442 10/24/09 16:00 Gogami Shift_check[24Sep2009_Day]
192441 10/24/09 16:00 cdaq Beam Time Accounting
192440 10/24/09 15:51 Tang Can you compare also the S/A ratios from kaon coin_time for high and low current runs?
192439 10/24/09 15:38 Seva Visual Scalers for run#76840
192438 10/24/09 15:36 Gogami Fast FB and Ion chambers screenshot
192437 10/24/09 15:35 Gogami DC HVs screenshot[carbon@20uA]
192436 10/24/09 15:35 seva BCM&BPM screen
192433 10/24/09 14:58 Seva Visual Scalers for run#76839
192432 10/24/09 14:57 seva BCM&BPM screen
192431 10/24/09 14:56 Gogami Fast FB and Ion chambers screenshot
192430 10/24/09 14:55 Gogami DC HVs screenshot[Carbon@20uA]
192425 10/24/09 14:47 shoh rate of QF is strange
192424 10/24/09 14:20 Seva Visual Scalers for run#76838
192423 10/24/09 14:19 seva BCM&BPM screen
192422 10/24/09 14:18 Gogami target and magnet controller screenshot
192421 10/24/09 14:16 Gogami Fast FB and Ion chambers control screenshot
192420 10/24/09 14:15 Gogami DC HVs screenshot[Carbon@20uA]
192417 10/24/09 14:04 Reinhold Comparison scaler rates now and old 12C data; not quite consistent
192415 10/24/09 13:44 Gogami I changed from ps5=1000 to ps=500.
192414 10/24/09 13:37 Seva Visual Scalers for run#76837
192413 10/24/09 13:34 seva BCM&BPM screens
192411 10/24/09 13:33 Gogami Fast FB and Ion chambers control screenshot
192407 10/24/09 13:30 Gogami DC HVs screenshot[Carbon@20[uA]]
192405 10/24/09 13:20 Gogami Track of Rates [Carbon target @ 20[uA]]~Run76825==>Run76835
192402 10/24/09 12:37 Seva Visual Scalers for run#76835
192401 10/24/09 12:35 seva BCM&BPM screen
192398 10/24/09 12:26 Gogami Fast FB control scrreenshot
192397 10/24/09 12:25 Gogami DC HVs screenshot[Carbon@20[uA]]
192396 10/24/09 12:22 Reinhold SLI looks borderline but still OK
192393 10/24/09 11:53 Reinhold The comparison of the number of lambda
192392 10/24/09 11:35 Gogami E02017 : 2.88[Torr] ==> 3.03[Torr] (correct value)
192391 10/24/09 11:32 Gogami HKS-HES Magnets Controller screenshot
192390 10/24/09 11:31 Gogami DC HVs screenshot[Carbon@20[uA]]
192389 10/24/09 11:31 Seva Visual Scalers for run#76834
192388 10/24/09 11:30 Gogami Fast FB and Ion chamber control screenshot
192386 10/24/09 11:28 seva Run#76833 BCM&BPM
192382 10/24/09 10:29 Seva Visual Scalers for run#76833
192379 10/24/09 10:22 seva Run#76832 BCM&BPM
192378 10/24/09 10:21 Gogami Fast FB and Ion chambers control screenshot
192377 10/24/09 10:18 Gogami DC HVs screenshot[Carbon@20uA]
192376 10/24/09 09:59 shoh The comparison of the number of lambda
192373 10/24/09 09:27 Gogami FFB and Ion chambers control screenshot
192372 10/24/09 09:25 Gogami DC HVs screen shot
192371 10/24/09 09:24 Seva Visual Scalers for run#76832
192369 10/24/09 09:21 seva Run#76831 BCM&BPM
192365 10/24/09 08:23 Seva Visual Scalers for run#76831
192362 10/24/09 08:13 seva Run#76830 BCM&BPM
192361 10/24/09 08:02 chench owl shift summary
192360 10/24/09 08:01 cdaq Beam Time Accounting
192357 10/24/09 07:32 xqiu checklist for run #76830
192356 10/24/09 07:22 chench Visual Scalers for run#76830
192354 10/24/09 07:17 chench BCM and BPM at the end of run#76829
192352 10/24/09 06:41 chench screenshot for HV of drift chambers during run#76829
192351 10/24/09 06:40 chench Change HV of HDC1 from 1920V to 1970V during run#76829
192350 10/24/09 06:35 chench HDC and HTOF tot hits from run#76829
192349 10/24/09 06:32 chench HKS Hodo dec tot hits compare run#76828 and run#76827
192348 10/24/09 06:30 chench The tothits from HDC and HHODO of run#76828 is different from the previous runs is because of the wrong Beam Position
192346 10/24/09 06:29 chench BCM and BPM during run#76829.
192345 10/24/09 06:22 chench Visual Scalers for run#76829
192344 10/24/09 06:20 chench beam position for run#76828 is wrong
192343 10/24/09 06:15 chench Sorry for no visual scalers record for run#76828
192342 10/24/09 06:14 xqiu checklist for run #76828 , something strange
192341 10/24/09 06:12 chench Beam comes back
192339 10/24/09 06:03 chench MCC called they lost the beam for HALLC for some reason they do not know
192336 10/24/09 05:48 chench BCM and BPM for run#76827
192332 10/24/09 05:04 xqiu checklist for run #76827
192331 10/24/09 05:02 chench correction:COIN=97.3HZ
192330 10/24/09 05:00 chench Visual Scalers for run#76827
192328 10/24/09 04:49 chench SLI does not work for last run and called MCC it works now
192326 10/24/09 04:48 chench BCM and BPM for run#76726
192324 10/24/09 04:02 chench The reason to change ps5 from 2000 to 1000
192323 10/24/09 04:00 xqiu checklist for run #76826
192322 10/24/09 03:54 chench change the ps5 from 2000 to 1000
192321 10/24/09 03:53 chench Visual Scalers for run#76826
192318 10/24/09 03:22 xqiu checklist for run #76825
192317 10/24/09 03:12 chench updated screenshot of FFB and fast raster
192316 10/24/09 03:00 chench correction: The target is carbon
192315 10/24/09 02:52 chench Visual Scalers for run#76825
192312 10/24/09 02:38 chench screenshot of FFB after change the target to carbon and turn off the fast raster
192310 10/24/09 02:35 xqiu checklist for run #76824
192309 10/24/09 02:35 chench move the target to #6 carbon
192307 10/24/09 02:31 chench BCM and BPM for run#76824
192306 10/24/09 02:28 chench fast raster analysis for run#76824
192305 10/24/09 02:27 chench fast raster analysis for run#76824
192304 10/24/09 02:24 Tang End the CH2 data taking after this run no matter if this is a short run
192303 10/24/09 02:18 chench correction:beam current is 2.0uA
192302 10/24/09 02:17 chench correction:beam current is 2.0uA
192301 10/24/09 02:17 chench Visual Scalers for run#76824
192299 10/24/09 02:10 chench beam is back, 2uA
192298 10/24/09 01:53 chench run# 76823 is a junk
192297 10/24/09 01:51 chench Beam left again, and mcc called the beam will be down for hopefully another couple minnutes
192295 10/24/09 01:47 chench beam is back, and the current is 2uA
192292 10/24/09 01:37 xqiu checklist for run #76822
192291 10/24/09 01:36 chench MCC called beam will be down for half an hour
192290 10/24/09 01:33 chench Beam is very unstable in this run
192287 10/24/09 01:24 chench BCM and BPM during run# 76822
192284 10/24/09 01:06 chenh FAST RASTER analysis for run#76821
192283 10/24/09 01:05 xqiu checklist for run #76820 and #76821
192281 10/24/09 01:00 chench Visual Scalers for run#76821
192280 10/24/09 00:58 chench BPM and BCM during run#76821
192278 10/24/09 00:54 xqiu checklist for run #76820
192275 10/24/09 00:32 chench fast raster analysis for run#76820
192274 10/24/09 00:25 chench Visual Scalers for run#76820
192273 10/24/09 00:17 chench BCM and BPM at the beginning of run#76820
192270 10/24/09 00:03 Chiba add EHODO hittpat
192269 10/24/09 00:03 cdaq Beam Time Accounting
192268 10/24/09 00:02 doi Run 76819 fast raster analysis
Friday
192267 10/23/09 23:50 vmaxwell Visual scalers for run # 76819
192266 10/23/09 23:49 Tang Another 7.5 million triggers will satisfy our need for the statistics of Sigma from CH2 target
192265 10/23/09 23:49 Chiba correction
192264 10/23/09 23:46 Chiba Kaon rate and so on come back in current run
192261 10/23/09 23:15 doi Run 76818 fast raster analysis
192260 10/23/09 23:07 vmaxwell Visual scalers for run # 76818
192259 10/23/09 23:00 doi Run 76817 fast raster analysis
192257 10/23/09 22:53 doi Run 76816 fast raster analysis
192255 10/23/09 22:49 vmaxwell Visual scalers for run#76816
192254 10/23/09 22:46 Nue Instruction to change CH2 runs to Carbon 20uA run
192250 10/23/09 22:24 Nue We are taking data in buffered mode. Simply comment was wrong.
192246 10/23/09 22:04 Tang Low LT but less rates, should we change to buffered mode?
192245 10/23/09 22:02 Tang Why are we running unbuffered mode?
192244 10/23/09 22:00 doi Run 76815 fast raster analysis
192243 10/23/09 21:44 vmaxwell visual scalers run # 76814/76815
192239 10/23/09 21:32 Chiba WC threshold changed (100,120) (low,high) => (80,100)(low,high)
192237 10/23/09 21:19 doi Run 76813 fast raster analysis
192236 10/23/09 21:14 vmaxwell bpm and bcm for run # 76813
192235 10/23/09 21:13 vmaxwell Visual scalers for run # 76813 ... comparison to run # 76565
192234 10/23/09 20:58 maruta How we moved HES-SS after the power outage.
192232 10/23/09 20:45 Nue FR on for CH2 runs
192231 10/23/09 20:37 yez SS Distribution for Run76811 with Raster On
192229 10/23/09 20:21 chench Analysis: HKS sieve slit analysis reslults from run#76808 which with fast raster on.
192228 10/23/09 20:09 maruta
192226 10/23/09 20:08 Nue FR is off
192223 10/23/09 19:46 yez HES SS Distribution for Run#76810- Look Correct now!
192221 10/23/09 19:41 cdaq Beam Time Accounting
192220 10/23/09 19:33 doi run information
192218 10/23/09 19:20 Nue FR is on
192215 10/23/09 18:45 yez Last entry is for HES. Here is the comparation of HKS SS between old and new -- Looks OK
192214 10/23/09 18:41 Nue HES sieve slit postion look wrong
192213 10/23/09 18:04 yez Sieve Slit data comparation between new data and old data
192212 10/23/09 17:46 Nue Beam: Beam position was checked with BeO with Raster 3x1
192210 10/23/09 17:35 Nue Run76809 FFB on FR off
192207 10/23/09 17:16 Reinhold Run 76807 fast raster
192206 10/23/09 17:12 Reinhold Run 76808 fast raster analysis
192205 10/23/09 17:11 Nue During this run, HES SS was moved by 0.5" up
192199 10/23/09 16:20 Nue Fast raster 1x3 for us (MCC 3x1) On
192197 10/23/09 16:06 saw HES sieve slit settings for runs 76805 and 76806
192194 10/23/09 15:58 saw Day shift summary
192189 10/23/09 15:46 saw Sieve slits in
192188 10/23/09 15:44 saw Errors in run 76804
192187 10/23/09 15:43 Nue Sieve Slit Scan started from Run76803
192183 10/23/09 15:19 saw Target: Changed to Carbon target
192179 10/23/09 15:06 Tang Run plan through weekend
192178 10/23/09 14:46 Nue Beam: Photon position was checked by YAG
192177 10/23/09 14:30 seva Run#76802 BCM&BPM
192176 10/23/09 14:27 seva Visual scalers for run#76802
192171 10/23/09 13:53 saw End of run sound moved to cdaql1
192170 10/23/09 13:43 seva Visual scalers for run#76801
192169 10/23/09 13:42 seva Run#76801 BCM&BPM
192166 10/23/09 13:21 Reinhold Verified beam tune after harp and viewer repair
192165 10/23/09 13:07 seva Run 76800 BPM&BCM
192164 10/23/09 13:06 seva Visual scalers for run#76800
192163 10/23/09 13:01 saw Beam: Feedback now on
192159 10/23/09 12:51 saw Target: Cr52 target in
192158 10/23/09 11:40 seva target change from Empty to BeO; beam tune
192157 10/23/09 11:24 seva magnets snapshot; HES-D access error
192155 10/23/09 11:06 shoh lambda of Cr (not enough statisrics)
192154 10/23/09 11:01 seva Beam permit
192152 10/23/09 10:39 Reinhold Harps and dump viever fixed
192151 10/23/09 10:14 Reinhold Re: In Controlled access
192150 10/23/09 09:41 saw In Controlled access
192147 10/23/09 08:51 seva BPMs back
192145 10/23/09 08:47 seva Moved target to BeO; MCC is sending pulsed beam
192142 10/23/09 08:41 seva Run#76799 BCM&BPM
192140 10/23/09 08:26 seva Beam gone for a few minutes to reset BPM IOC
192138 10/23/09 08:17 saw Switched Argon bottle
192136 10/23/09 08:03 kawama Owl shift summary
192135 10/23/09 08:03 cdaq Beam Time Accounting
192133 10/23/09 07:54 kawama Everything seems to be better now, suddenly
192132 10/23/09 07:49 shoh rate & checklist #76798 (rate decreace)
192131 10/23/09 07:48 kawama bpm screen shot
192130 10/23/09 07:46 kawama H1X ADC shape become better
192129 10/23/09 07:42 kawama EDC & HDC screen shot
192126 10/23/09 07:38 kawama BPM is not available now
192125 10/23/09 07:16 shoh rate & checklist #76797
192124 10/23/09 07:16 kawama bpm screen shot
192121 10/23/09 06:52 shoh BPM & BCM Screen Shot
192120 10/23/09 06:44 shoh rate & checklist #76796
192119 10/23/09 06:30 kawama EDC & HDC screen shot
192114 10/23/09 06:03 kawama Beam current is unstable during 76795
192113 10/23/09 06:00 shoh rate & checklist #76795
192112 10/23/09 05:50 kawama EDC & HDC screen shot
192111 10/23/09 05:49 kawama bpm screen shot
192109 10/23/09 05:19 shoh rate & checklist #76790
192107 10/23/09 05:17 kawama EDC & HDC screen shot
192103 10/23/09 04:48 shoh BPM & BCM positon
192102 10/23/09 04:46 shoh rate & checklist #76793
192101 10/23/09 04:46 kawama bpm screen shot
192100 10/23/09 04:38 kawama EDC & HDC screen shot
192097 10/23/09 04:16 shoh rate & checklist #76792
192095 10/23/09 04:10 chench correction: the forth figure again
192093 10/23/09 04:04 chench correction: previous entry's fouth figure is not correct and here put all of them again
192091 10/23/09 03:52 chench EDC2 relate to EDC1 geometry alignment has been done and the new parameters have been commit to ver280
192090 10/23/09 03:45 kawama H1X hitpat and ADC in run76737
192089 10/23/09 03:42 shoh rate & checklist #76791
192088 10/23/09 03:39 kawama H1X hitpat & ADC
192082 10/23/09 03:11 shoh rate & checklist #76790
192081 10/23/09 02:58 shoh BPM position
192080 10/23/09 02:57 kawama HallC chicane X value looks changed
192077 10/23/09 02:50 shoh EDC HV condition
192076 10/23/09 02:50 kawama bpm screen shot
192075 10/23/09 02:37 shoh rate & checklist #76789
192074 10/23/09 02:29 kawama The number of kaon is decreased in run76785 compared to run76736
192073 10/23/09 02:26 chench Change the HV of HDC1 to 1920V at beginning of run#76789
192069 10/23/09 02:10 shoh rate & checklist #76788
192068 10/23/09 02:08 chench HV of drift chambers at targer Cr52 and beam current 7.5uA
192067 10/23/09 02:08 kawama Is really the correct BPM 3H03B-x value -6.59?
192065 10/23/09 01:57 shoh The rate of HKS & HES when beam position was BPM=-6.16
192064 10/23/09 01:51 kawama I was wrong; correct value is -6.59.
192063 10/23/09 01:50 shoh bpm position
192060 10/23/09 01:44 kawama MCC called; BPM value should be OK now
192059 10/23/09 01:37 shoh AC2-2B TDC became good
192058 10/23/09 01:32 kawama x of IPM3H03B value changed
192056 10/23/09 01:22 shoh rate & checklist #76786 (S/N of AC2-2B became bad)
192055 10/23/09 01:22 kawama ROC14 error, rebooted
192053 10/23/09 01:15 shoh BPM picture
192052 10/23/09 01:00 shoh The S/N ratio of AC2-2B became bad
192051 10/23/09 00:57 shoh The S/N ratio of AC2-2B became bad
192050 10/23/09 00:56 kawama EDC & HDC screen shot
192047 10/23/09 00:43 Reinhold Re: run 76780 visual scaler rate is decreasing
192044 10/23/09 00:29 shoh rate & checklist #76785
192041 10/23/09 00:04 shichijo swing shift summary
192040 10/23/09 00:04 cdaq Beam Time Accounting
Thursday
192039 10/22/09 23:49 Petkovic Target 52Cr current 7.5 uA, HES Coll Position: - 330.20 mm --> VISUAL SCALERS Run # 76784
192038 10/22/09 23:48 shichijo BCM and BPM screen shot
192033 10/22/09 23:16 shichijo beam current change
192032 10/22/09 23:11 Petkovic Current 7.5 uA on 52Cr target --> VISUAL SCALERS, Run # 76783 (HES Collimator Position = 330.20 mm)
192031 10/22/09 23:09 chench The remaining Argon can hold around another 10hours according to the previous record
192030 10/22/09 23:09 shichijo This run is ended due to increase the beam current to 8uA.
192025 10/22/09 22:55 Petkovic 22:00 Warning: Argon Bottle 500/50 (PSI)
192024 10/22/09 22:48 shichijo visual scaler rate is decreasing
192021 10/22/09 22:12 Petkovic Current 7.5 uA on 52Cr target --> VISUAL SCALERS, Run # 76780 (HES Collimator Position = 330.20 mm)
192018 10/22/09 21:47 maruta HES butterfly before and after HES SS movement
192015 10/22/09 21:27 Petkovic Current 7.5 uA on 52Cr target --> VISUAL SCALERS, Run # 76779 (HES Collimator Position = 330.20 mm)
192014 10/22/09 21:21 Tang What is the hit pattern for Run#76737?
192011 10/22/09 21:14 shichijo beam was unstable during this run
192010 10/22/09 20:46 Petkovic/Aya Current 7.5 uA on 52Cr target --> VISUAL SCALERS, Run # 76778 (HES Collimator Position = 330.20 mm)
192005 10/22/09 20:20 shichijo BPM and BCM screen shot
192004 10/22/09 20:10 Petkovic Current 7.5 uA on 52Cr target --> VISUAL SCALERS, Run # 76777 (HES Collimator Position = 330.20 mm)
192001 10/22/09 19:33 Petkovic Current 7.5 microamps on 52Cr VISUAL SCALERS, Run # 76776 HES Collimator Position = 330.20 mm
191997 10/22/09 19:03 Petkovic Current 7.5 microamps on 52Cr VISUAL SCALERS, Run # 76775 HES Collimator POsitin = 330.20 mm
191995 10/22/09 18:52 maruta HES Sieve Slit scan result.
191994 10/22/09 18:52 shichijo EHOD hit pattern
191991 10/22/09 18:45 Nue Snapshot of HallC parameters
191990 10/22/09 18:44 Nue Snapshot of magnets, collimator, target controllers
191989 10/22/09 18:31 Nue Beam: Beamline magnets setting after beam tune
191988 10/22/09 18:26 shichijo BCM & BPM screen shot
191987 10/22/09 18:25 Petkovic Current 7.5 microamps on 52Cr VISUAL SCALERS, Run # 76774 HES Collimator POsitin = 330.20 mm
191986 10/22/09 18:19 Nue Beam: Screenshot of New BPMs and other monitors
191985 10/22/09 18:16 shichijo buffer size change for events on ROC11
191977 10/22/09 17:36 shichijo Fission chamber:pumping to 50mTorr, and refill gas to 2.94Torr.
191976 10/22/09 17:29 saw ROC11/sfihes readout list
191974 10/22/09 17:10 Nue HES sieve slit scan started with Cr 5uA beam
191971 10/22/09 17:02 Nue Target: FSD is now working for the target motion
191970 10/22/09 17:02 maruta EDC HV screen shot at 5uA Cr
191969 10/22/09 16:59 shichijo change beam current
191967 10/22/09 16:57 shichijo reduce beam current to 6.5uA
191964 10/22/09 16:52 shichijo ROC 11 error
191963 10/22/09 16:46 shichijo DAQ error again, reboot ROC11
191962 10/22/09 16:43 shichijo this run was ended because of the DAQ error
191961 10/22/09 16:42 Nue Beam: Reference BPM positions were changed after beam outage
191960 10/22/09 16:34 Nue Screenshot of Ion Chambers at 45uA carbon
191953 10/22/09 16:23 chench Day Shift Summary
191951 10/22/09 16:11 cdaq Beam Time Accounting
191949 10/22/09 15:55 Chiba Cr=>BeOis correct
191947 10/22/09 15:53 Chiba target change C=>BeO
191946 10/22/09 15:51 Chiba histgram for 76764
191943 10/22/09 15:39 chench move the target to Cr52 and ask 7.5uA beam to check the beam size and beam position by rate
191940 10/22/09 15:38 Chiba the beam position and beam size right now
191939 10/22/09 15:29 chench both beam position and beam size looks quite good right now
191938 10/22/09 15:25 Chiba Screenshot of BPMs.
191937 10/22/09 15:21 chench beam is tuning with 2.5uACW and MCC called the beam size is good enough
191936 10/22/09 15:17 Reinhold Run #76763: hks09.flags set wrong for this run
191935 10/22/09 15:13 maruta screen shot of the magnet controller
191934 10/22/09 15:11 Chiba Trigger of Run76762 and Run76763 were wrong.
191933 10/22/09 15:09 Chiba Trigger of Run76762 and Run76763 were wrong.
191932 10/22/09 15:03 chench MCC called they will send the pulsed beam to HALLC and study it
191931 10/22/09 14:47 chench Hall is going to power permit
191930 10/22/09 14:45 Reinhold There's no easy fix for the Harps; trying to figure out whether we can do w/out
191928 10/22/09 14:35 chench We are waiting for the decision from MCC because it is not sure that without HAPRS before target, beam tune can be done
191926 10/22/09 14:06 chench HARPS 3H03A and 3H03B are broken and so far MCC experts can not fix it
191925 10/22/09 13:58 chench MCC called to ask us move the target to BeO but thoese experts is still working in the HALL
191924 10/22/09 13:23 chench Hall C is still in controlled access, MCC said people are working on harps
191923 10/22/09 12:50 Chiba Screenshot of BPMs. 9th Dipole Still missing
191922 10/22/09 12:41 yuan New HKS hodoscope parameter file and "h_trans_scin.f" committed
191921 10/22/09 12:35 yuan Update HKS hodoscope time offset parameters
191920 10/22/09 12:29 Chiba Sorry, still not yet. My mistake
191919 10/22/09 12:23 Chiba Beam will come
191918 10/22/09 11:59 chench MCC asked the controlled access because PSS is broken
191917 10/22/09 11:55 Chiba 9th Dipole missing again. Because of controlled access?
191916 10/22/09 11:50 chench HALLC is in controlled access
191915 10/22/09 11:28 Chiba Screenshot of BPMs, 9th Dipole, etc
191914 10/22/09 11:23 chench Tuning is in the halft way, MCC would send the people to the HALL, controlled access is in its way
191912 10/22/09 11:06 Chiba histgrams for 76763
191911 10/22/09 11:04 chench Pulsed beam is sent , and MCC is trying a serious beam tune
191907 10/22/09 10:53 chench visual scalers for run#76763 after they tuning the beam
191906 10/22/09 10:46 Nue Beam tune will start from 11:00
191904 10/22/09 10:43 Chiba target change BeO=>C
191901 10/22/09 10:27 chench visual scalers for run#76762 after they tuning the beam
191900 10/22/09 10:18 Nue Beam spot on BeO is large and off-centered
191899 10/22/09 10:14 Chiba histgrams for 76756
191895 10/22/09 10:01 Chiba target change Cr=>BeO
191893 10/22/09 10:00 Chiba at the end of run76753 ~ to at the beggining of run76756 beam status
191892 10/22/09 09:56 Chiba After end of run 76756 asked Beam current 7.5uA, and now back 5.0uA
191884 10/22/09 09:35 chench visual scalers for run#76756 after they tuning the beam
191883 10/22/09 09:33 Chiba BCM and BPM at the beginning of run#76756
191880 10/22/09 09:23 Tang Low means beam is aimed higher
191879 10/22/09 09:21 chench visual scalers for run#76755
191876 10/22/09 09:04 Chiba histgram 75755
191875 10/22/09 08:52 chiba BCM and BPM during run#76755, target Cr52, beam 4.7uA
191874 10/22/09 08:46 Tang It is correct at YAG. I asked it tuned that way as our final tune.
191873 10/22/09 08:35 Reinhold Hall B pass change scheduled from 11 am to 1 pm
191872 10/22/09 08:33 Reinhold Mike Spata will have a look at the tune
191871 10/22/09 08:23 kawama ROC11 rebooted automatically
191870 10/22/09 08:23 kawama Owl shift summary
191869 10/22/09 08:20 kawama EDC & HDC screen shot
191864 10/22/09 08:07 Nue Screenshot of BPMs, 9th Dipole, etc
191862 10/22/09 08:05 cdaq Beam Time Accounting
191861 10/22/09 07:51 kawama HES butterfly in run76744
191860 10/22/09 07:45 kawama EDC & HDC screen shot
191859 10/22/09 07:30 Reinhold Looks like 9th dipole NMR is not locking
191858 10/22/09 07:26 kawama EH2 shape is still strange
191857 10/22/09 07:20 kawama BPM & BCM screen shot
191856 10/22/09 07:18 kawama End run failed 76751 & ROC11 has auto rebooted again again again
191855 10/22/09 07:15 kawama Visual scaler rate during 76753
191853 10/22/09 07:05 kawama Call MCC; requested 5uA
191851 10/22/09 06:58 kawama Compare EDC tracking efficiency
191850 10/22/09 06:56 Reinhold Call from MCC: ask whether they should tune the photon line; we say yes.
191849 10/22/09 06:55 Reinhold BPM excursions and 9th dipole NMR off
191848 10/22/09 06:54 Nue photon on YAG looks too low.
191847 10/22/09 06:37 kawama Visual scaler rate during 76751
191846 10/22/09 06:34 kawama EDC & HDC screen shot
191845 10/22/09 06:30 Reinhold Call to MCC: ask about photon beam line tune
191844 10/22/09 06:26 Reinhold BCM scaler analysis
191843 10/22/09 06:25 Reinhold MCC reports harps 3h03a & b not working
191840 10/22/09 06:20 kawama BPM & BCM screen shot
191839 10/22/09 06:18 Nue Beam: Beamline magnets setting after the power outage
191838 10/22/09 06:11 kawama Probably this error is related to the higher data rate
191837 10/22/09 06:06 kawama Compare HDC-1 TDC
191835 10/22/09 05:56 kawama Compare some histograms before/after power outage
191834 10/22/09 05:49 Nue Visual scaler rate was changed before and after the power outage, ibcm, magnets look OK
191833 10/22/09 05:42 Reinhold Request harp scans 3h03A and 3h03b
191831 10/22/09 05:40 vmaxwell visual scalers run # 76749 .. 7.0 uA on 52Cr target
191830 10/22/09 05:34 vmaxwell EDC1 raw hit tot before and after
191827 10/22/09 05:23 kawama HDC & EDC screen shot
191825 10/22/09 05:22 kawama BPM & BCM screen shot
191824 10/22/09 05:19 kawama ROC11 rebooted automatically
191820 10/22/09 04:57 kawama Beam is off about 5 min.
191819 10/22/09 04:56 kawama rate during 76744, 7.5uA/7.0uA
191817 10/22/09 04:47 kawama requested 7.0 uA
191816 10/22/09 04:38 kawama HDC & EDC screen shot
191814 10/22/09 04:30 kawama EDC1 -5V was not working, now looks OK
191811 10/22/09 03:38 kawama HDC & EDC screen shot
191810 10/22/09 03:36 kawama Call to MCC; requested 2uA beam for EDC1 check
191808 10/22/09 03:09 vmaxwell EDC1 signal missing? run # 76742
191807 10/22/09 03:00 kawama HDC & EDC screen shot
191806 10/22/09 02:59 kawama Compare rate with #76737
191803 10/22/09 02:44 kawama BPM screen shot
191802 10/22/09 02:43 kawama Beam is back; pulsed beam is OK
191801 10/22/09 02:39 kawama Stopped this run because beam is back
191800 10/22/09 02:39 kawama MCC called; Problem on some magnet
191797 10/22/09 01:54 kawama Call to MCC; they are working to fix the problem
191796 10/22/09 01:28 Nue Analysis: Carbon Cointime E01-011 vs E05-115
191795 10/22/09 01:26 kawama Copy of ELOG entry; some problem on 3C03
191794 10/22/09 01:18 kawama Turned off all drift chambers HV
191792 10/22/09 01:07 kawama Ntuples under paw/ were moved to /net/cdaqfs/scratch/cdaq/hks09
191791 10/22/09 01:06 kawama MCC called; pulsed beam will be delivered
191790 10/22/09 00:37 Reinhold Runplan for owl & start of day
191789 10/22/09 00:04 cdaq Beam Time Accounting
191788 10/22/09 00:03 Petkovic Beam: Swing Shift Summary
Wednesday
191787 10/21/09 23:55 Chiba Current WC NPE
191785 10/21/09 23:09 maruta DZ and two DW magnets are communication problem
191784 10/21/09 23:01 Petkovic Beam: 10:55 BeO positioned as the target for beam pulse tuning by the MCR
191781 10/21/09 22:19 Petkovic Beam: 10:10 Beam Expectation to Hall C
191780 10/21/09 22:09 maruta Sieve slit & target positions
191779 10/21/09 22:03 Nagao/Petkov 21:59 Ended Cosmics Run # 76740 and Start Cosmics Run #76741 in Coin-mode
191776 10/21/09 21:22 Reinhold You can run Online Replay on cdaql4
191773 10/21/09 20:51 kawama replay cannot be used on "local" cdaql3
191772 10/21/09 20:49 Petkovic Beam: 20:40 Controlled Access mode by the MCR (to check valves)
191771 10/21/09 20:25 kawama Dear shift takers : Online replay should be used on cdaql3
191768 10/21/09 19:42 Petkovic Beam: 19:20 Shift Crew of the MCR requested to open Beam Pipe (two valves) in the Hall C
191765 10/21/09 17:39 shoh runlist #76740
191764 10/21/09 17:37 Petkovic Beam: 17:30 Dialogue with the MCR about Beam Recovery
191763 10/21/09 17:33 shoh revision of run condition
191760 10/21/09 17:00 chench Late entry:Day shift summary
191759 10/21/09 16:32 bono aerogel study
191758 10/21/09 16:18 Petkovic Beam: 16:15 No beam. Running Cosmics data in Coin-mode
191757 10/21/09 16:03 cdaq Beam Time Accounting
191752 10/21/09 15:26 Reinhold Runplan
191751 10/21/09 15:02 saw Late Entry: Magnets cycled and set
191749 10/21/09 14:16 Chiba Current WC threshold might be best
191747 10/21/09 13:21 chench checklist for the first 47000 events of the cosmic run#76739, all the detectors work normally
191746 10/21/09 12:38 chench All the HVs are on and start to take the cosmic run to test the dectectors
191744 10/21/09 12:28 chench Updated the HV of HKS drift chamber after power outage and before beam coming
191743 10/21/09 12:27 chench HV of drift chambers after the power outage before beam coming
191741 10/21/09 11:19 Nue Do not touch removed targets on the target in Hall C
191740 10/21/09 11:09 chench HALL C is sweeping now
191739 10/21/09 11:04 Nue New CH2 plate, Carbon target were installed. Picture of old CH2 plate
191738 10/21/09 10:45 Reinhold Re: HES Q1 PS faults (big bite PS)
191737 10/21/09 10:43 chench MCC called they are going to sweep the HALL in 15mins
191736 10/21/09 10:33 chench turn off the HV of HDC1&2
191735 10/21/09 10:28 chench MCC alled they are ready for sweeping and beam may be can go down the HALL in 2:00pm
191734 10/21/09 10:19 chench Confirm that the NIM BIN for HKS HDC1&2 works well
191733 10/21/09 09:54 Reinhold HES Q1 PS faults (big bite PS)
191732 10/21/09 09:28 chench trun on the HDC1&2 high voltage to check the signal downstairs
191731 10/21/09 08:50 Reinhold Magnet controls not working
191730 10/21/09 08:18 Reinhold Replaces one CAEN A503 Positive HV card with a "spare" from HMS/SOS crates
191729 10/21/09 08:12 yez Owl Shift Summery
191728 10/21/09 05:17 vmaxwell HV turned on .. look good
191727 10/21/09 04:50 vmaxwell HV to aerogel layers and drift chambers set
191726 10/21/09 03:58 kawama Confirmed EDC1, EDC2 LVs are OK
191725 10/21/09 03:38 kawama Late entry : rebooted ROC11
191724 10/21/09 03:27 kawama DAQ looks fine
191723 10/21/09 03:26 kawama All drift chambers can be put HV=100V successfully
191720 10/21/09 03:19 maruta HES-Q2/D and HKS-Q1/D magnet control recover
191719 10/21/09 03:13 maruta Sieve Slits are at Sieve slit run position
191718 10/21/09 02:55 maruta Sieve Slits and target control recover
191717 10/21/09 02:44 yez Beam: Current Status
191716 10/21/09 02:35 maruta Reset HKS-Q1 and HES-Q2 power supplies
191715 10/21/09 02:03 chench All the bucking coil power supply voltage measured normal
191714 10/21/09 02:02 chench HKS Drift chamber NIM BIN power supply does not work properly
191713 10/21/09 01:55 saw Crate 33 AC power problem?
191712 10/21/09 01:52 chench Low valtage and threshold of All the chambers works properly
191711 10/21/09 01:38 saw HV crate 33 sick
191710 10/21/09 01:23 Reinhold Now all for drift chambers bubbling
191709 10/21/09 01:21 Reinhold Restarted gas flow to HKS and HES drift chambers; HKS DC not yet bubbling
191708 10/21/09 01:19 Reinhold Restarted HES, HKS, Dump Line Pumps and Turbos
191707 10/21/09 00:57 yez Threshold of HDC1 & HDC2 set to 6.0 V
Tuesday
191706 10/20/09 23:51 Kawama NIM bin and CAMAC crate voltage checked
191705 10/20/09 23:49 Kawama NIM Bon
191704 10/20/09 23:49 shichijo summary of swing shift
191703 10/20/09 23:21 Reinhold Talked to Joe
191702 10/20/09 23:19 Reinhold Talked to Andy
191701 10/20/09 22:45 Kawama NFS is not working
191700 10/20/09 22:40 Kawama Checked HV
191699 10/20/09 22:39 Kawama Checked HV
191698 10/20/09 22:24 Reinhold Site wide power outage; meanwhile power restored
191697 10/20/09 22:17 shichijo HallC counting room is recovered from electrical power down
191696 10/20/09 22:10 close valve of Ar and ethane bottle
191695 10/20/09 21:54 shichijo CEBAF shut down
191694 10/20/09 21:49 saw Shutdown cdaqfs
191693 10/20/09 21:47 saw All accelerator site power down
191692 10/20/09 21:39 saw Shutdown cdaql6
191691 10/20/09 21:35 saw All accelerator site power down
191690 10/20/09 21:34 saw Home directory almost full
191689 10/20/09 21:26 Kawama Counting house power has gone
191688 10/20/09 20:57 shoh EDC HV & Current
191687 10/20/09 20:57 shoh HDC HV & Current
191686 10/20/09 20:37 shoh rate & checklist #76737
191683 10/20/09 20:22 shichijo beam is not stable during this run
191682 10/20/09 20:06 shichijo BPM and BCM screen shot (run#76736)
191681 10/20/09 19:53 shoh rate & checklist #76736
191677 10/20/09 19:41 shichijo run#76734 ended because beam was stop
191675 10/20/09 19:10 shoh rate & checklist #76734
191671 10/20/09 18:28 shoh rate & checklist #76733
191670 10/20/09 18:22 shichijo Stopped fission chamber run 1465 to pump down
191666 10/20/09 17:58 shichijo BCM and BPM screen shot (run#76732)
191665 10/20/09 17:45 shichijo pulsed beam
191664 10/20/09 17:40 shoh rate & checklist #76732
191659 10/20/09 17:03 shoh rate & checklist #76731
191656 10/20/09 16:45 maruta Diagnose of the HES-Q2 hallprobe
191655 10/20/09 16:32 shoh check list #76730
191654 10/20/09 16:21 shoh rate #76730
191652 10/20/09 16:07 shichijo Hall C is now beam permit
191651 10/20/09 16:02 cdaq Beam Time Accounting
191650 10/20/09 15:58 chench Day shift summary
191647 10/20/09 15:30 Chench Asked Controlled Access to check HES Q2 field error
191645 10/20/09 15:20 Chiba Correction
191644 10/20/09 14:59 chench End the run due to the problem from MCC to send the beam
191643 10/20/09 14:55 chench Beam has tripped for 12mins, and MCC said beam would be down for another half an hour
191641 10/20/09 14:31 chench HV of Drift Chambers during beam current was 7.8uA
191640 10/20/09 14:28 chench BCM and BPM during run#76729
191637 10/20/09 14:26 chench Visual Scalers for run#76729
191636 10/20/09 14:24 xqiu checklist for run #76729
191635 10/20/09 14:15 chench Hallc 9th dipole NMR signal becomes normal
191632 10/20/09 14:09 chench a big fluctuation of HALLC 9th Dipole NMR(HCNMR:SIG) signal
191631 10/20/09 13:49 chench BCM and BPM during run#76728
191630 10/20/09 13:43 xqiu checklist for run #76728
191629 10/20/09 13:42 chench Visual Scalers for run#76728
191626 10/20/09 13:28 xqiu Fission chamber:pumping to 50mTorr, and refill gas to 2.98Torr.
191623 10/20/09 13:06 chench HV of Drift Chambers beam current 7.2uA, and target Cr52
191622 10/20/09 13:01 xqiu checklist for run #76727
191621 10/20/09 12:58 chench Visual Scalers for run#76727
191620 10/20/09 12:53 chench BCM and BPM during run#76727
191617 10/20/09 12:21 xqiu checklist for run #76726
191616 10/20/09 12:19 chench Visual Scalers for run#76726
191615 10/20/09 12:15 chench BCM and BPM during run#75726
191614 10/20/09 12:14 chench After MCC reboot SLI of HALLC, beam is back, current is 7.5uA
191613 10/20/09 12:13 chench Screenshot of BPM during last two hours
191610 10/20/09 12:08 chench Beam: end the run since MCC reboot the SLI
191609 10/20/09 12:03 chench MCC called they would check SLI for hallc, beam would be down for a while
191606 10/20/09 11:56 xqiu checklist for run #76725
191605 10/20/09 11:55 xqiu checklist for run #76725
191604 10/20/09 11:54 chench BCM and BPM during run#76725
191603 10/20/09 11:52 chench Visual Scalers for run#76725
191602 10/20/09 11:46 chench Mcc called HallA request Half wave plate in
191599 10/20/09 11:38 Chench Called to MCC that the SLI always arond 8.0 and the energy spread goes up to 10*10-5
191598 10/20/09 11:23 xqiu checklist fir run #76724
191597 10/20/09 11:23 xqiu checklist fir run #76724
191596 10/20/09 11:22 chench BCM and BPM during run#76724
191594 10/20/09 11:18 chench End the run to make sure the field error of HES Q2
191593 10/20/09 11:17 chench Visual Scalers for run#76724
191592 10/20/09 11:14 xqiu checklist fir run #76724
191591 10/20/09 11:14 mack TOF mass squared
191590 10/20/09 11:09 xqiu checklist for run #76723
191584 10/20/09 10:27 xqiu checklist for run #76722
191583 10/20/09 10:25 chench BCM and BPM during run#76722
191582 10/20/09 10:24 chench Visual Scalers for run#76722
191579 10/20/09 09:56 xqiu checklist for run #76721
191578 10/20/09 09:54 chench BCM and BPM during run#76721
191577 10/20/09 09:52 xqiu checklist for run #76721
191576 10/20/09 09:52 xqiu checklist for run #76721
191575 10/20/09 09:45 chench Visual Scalers for run#76721
191572 10/20/09 09:29 chench Correction: The run# is 76720
191571 10/20/09 09:07 chench BCM and BPM during run#76720
191570 10/20/09 09:07 xqiu checklist for run #76720
191569 10/20/09 09:06 chench Visual Scalers for run#76719
191567 10/20/09 08:56 chench DAQ problem during run#76719, stop the run at the event#3187426
191565 10/20/09 08:37 chench HV of drift chambers run#76719
191564 10/20/09 08:35 chench Visual Scalers for run#76719
191563 10/20/09 08:29 xqiu Analysis: checklist for run #76719
191562 10/20/09 08:24 chench BCM, BPM during run76719
191560 10/20/09 08:19 Reinhold Call to MCC: Energy spread fluctuating
191557 10/20/09 08:11 xqiu Analysis: checklist for run #76718
191556 10/20/09 08:09 cdaq Beam Time Accounting
191554 10/20/09 07:55 seva Owl shift summary
191553 10/20/09 07:41 P Achenbach visual scalers run # 76718 at 7.5 uA on 52Cr
191550 10/20/09 07:26 P Achenbach visual scalers run # 76717 at 7.5 uA on 52Cr
191543 10/20/09 06:03 P Achenbach visual scalers run # 76715 at 7.5 uA on 52Cr
191538 10/20/09 05:17 P Achenbach visual scalers run # 76714 at 7.5 uA on 52Cr
191535 10/20/09 04:49 P Achenbach visual scalers run # 76713 at 7.5 uA on 52Cr
191534 10/20/09 04:48 seva bcm and bpm run #76713
191531 10/20/09 04:42 Chiba correction
191530 10/20/09 04:38 Chiba attempt to use carve cut & cointime shift
191527 10/20/09 04:11 P Achenbach visual scalers run # 76712 at 7.5 uA on 52Cr
191522 10/20/09 03:44 P Achenbach visual scalers run # 76711 at 7.5 uA on 52Cr
191521 10/20/09 03:43 P Achenbach visual scalers run # 76710 at 7.5 uA on 52Cr
191515 10/20/09 02:25 P Achenbach visual scalers run # 76709 at 7.5 uA on 52Cr
191513 10/20/09 01:53 seva Run#76609 BCM&BPM
191510 10/20/09 01:18 P Achenbach visual scalers run # 76708 at 7.5 uA on 52Cr
191507 10/20/09 01:14 P Achenbach visual scalers run # 76707 at 7.5 uA on 52Cr
191504 10/20/09 01:09 Reinhold SVN COMMIT: add charge replay; revision 269
191501 10/20/09 00:26 Chiba beta tail in Cr recent run
191499 10/20/09 00:01 vmaxwell current 7.5 uA on 52Cr target .. visual scalers run # 76706
191498 10/20/09 00:01 cdaq Beam Time Accounting
Monday
191494 10/19/09 23:34 vmaxwell currrent 7.5 uA on 52Cr target .. visual scalers run # 76705
191491 10/19/09 22:58 vmaxwell current 7.5 uA on 52Cr target .. visual scalers run # 76704
191489 10/19/09 22:50 yuan The quality of TOF calibration
191487 10/19/09 22:35 vmaxwell current 7.5 uA on 52Cr target .. visual scalers run # 76703
191486 10/19/09 22:31 Tang This type of cut is a good idea but needs to be optimized.
191484 10/19/09 22:30 chench Adjust the flow rate of drift chamber gas from 1.0 to 1.64
191481 10/19/09 21:53 christy beam screens for run 76702
191480 10/19/09 21:47 vmaxwell current 7.5 uA on 52Cr target .. visual scalers run # 76702
191477 10/19/09 21:18 current 7.5 uA on 52Cr target .. visual scalers run # 76701
191474 10/19/09 20:42 vmaxwell current 7.5 uA on 52Cr target .. visual scalers run # 76700 ... strange livetime again
191470 10/19/09 20:04 christy stop fission chamber run 1450 to pump down
191468 10/19/09 19:58 vmaxwell current 7.5 uA (nominal) on 52Cr target .. visual scalers run # 76699
191465 10/19/09 19:21 vmaxwell current 7.5 uA (nomianl) on 52Cr target .. visual scalers run # 76698
191464 10/19/09 19:15 vmaxwell livetime run 76697
191462 10/19/09 19:11 vmaxwell livetime for run # 76697 decreased to 98.8 % by end of run
191461 10/19/09 19:00 vmaxwell current 7.5 uA (nominal) on 52Cr target .. visual scalers run # 76697 ... strange livetime %
191460 10/19/09 18:49 christy beam screen grab - run 76695
191457 10/19/09 18:14 vmaxwell Current 7.5 (nominal) on 52Cr target .. visual scalers run # 76696
191454 10/19/09 17:36 vmaxwell Current 7.5 uA (nominal) on 52Cr target .. visual scalers run # 76695
191451 10/19/09 17:07 vmaxwell current 7.5 uA (nominal) on 52Cr target .. visual scalers run # 76694
191448 10/19/09 16:22 albayrak Current 7.5 uA on 52Cr --> VISUAL CSALERS Run # 76693
191447 10/19/09 16:14 Christy BPM & BCm Run # 76693
191445 10/19/09 16:05 Petkovic Day Shift Summary
191444 10/19/09 16:04 cdaq Beam Time Accounting
191443 10/19/09 15:56 Anusha Current 7.5 uA on 52Cr --> VISUAL CSALERS Run # 76692
191442 10/19/09 15:56 PETKOVIC BPM & FB Control Run # 76692
191441 10/19/09 15:54 Anusha Current 7.5 uA on 52Cr --> VISUAL CSALERS Run # 76691
191440 10/19/09 15:53 Petkovic Beam: 15:40 Beam back with 7.5 uA on 52Cr. Started Run # 76692
191439 10/19/09 15:52 Petkovic 15:40 Rebooted CODA for Fission Chamber Experiment
191438 10/19/09 15:49 Petkovic Beam: 15:40 Beam back with 7.5 uA on 52Cr. Started Run # 76692
191435 10/19/09 15:36 Anusha Current 7.5 uA on 52Cr --> VISUAL CSALERS Run # 76691
191434 10/19/09 15:31 Petkovic Beam: 15:25 MCR reported Beam off (cca 05 hour) due to troubles with one magnet
191430 10/19/09 15:17 Gogami Track of Rates [52Cr target]
191427 10/19/09 15:01 Anusha/Petko Current 7.5 uA on 52Cr --> VISUAL CSALERS Run # 76690
191426 10/19/09 14:51 Petkovic BPM & BCM Run # 76690
191422 10/19/09 14:34 maruta
191420 10/19/09 14:17 Anusha/Petko Current 7.5 uA on 52Cr --> VISUAL CSALERS Run # 76689
191419 10/19/09 14:09 Petkovic BPM & BCM Run #76689
191416 10/19/09 13:39 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76688
191415 10/19/09 13:30 Petkovic 13:26 The IOC established, Beam back
191412 10/19/09 13:19 shoh grouping summary
191410 10/19/09 13:07 Petkovic Beam: 13:00 MCR reported lost ot the IOC: Beam off expected for the half of an hour
191408 10/19/09 12:25 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76687
191407 10/19/09 12:22 Petkovic BPM & BCM Run # 76687
191404 10/19/09 12:15 shoh The number of lambda for Be target run
191403 10/19/09 12:12 Nue Power cycle did not solve the HES-Q2 Hall Probe
191402 10/19/09 11:52 b kaon rate before and after threshold change
191399 10/19/09 11:45 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76686
191396 10/19/09 11:21 Reinhold HES Q2 ; Field error
191395 10/19/09 11:19 Petkovic BPM & BCM Run # 76685
191394 10/19/09 11:19 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76685
191393 10/19/09 11:17 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76684
191392 10/19/09 11:11 Gogami DC HVs screenshot[52Cr@7.5[uA]/Run76685]
191391 10/19/09 11:05 Petkovic EDC1 Restarted Voltage and new Run # 76885 started, Current 7.5 uA on 52Cr.
191390 10/19/09 11:00 Gogami HES Q2 ; Field error ==>This is problem?
191388 10/19/09 10:55 Gogami Drift chamber was turned off.Tripped?
191386 10/19/09 10:52 Petkovic BPM & BCM Run # 76684
191385 10/19/09 10:44 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76684
191384 10/19/09 10:39 yez Fission Chamber Gas pump and refill
191379 10/19/09 10:13 Anusha/Petko Fast FB Status, Run # 76683
191378 10/19/09 10:09 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76683
191377 10/19/09 10:06 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76682
191376 10/19/09 10:04 Petkovic BPM & BCM Run # 76683
191373 10/19/09 09:29 Petkovic BPM & BCM, Run # 76682
191372 10/19/09 09:29 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76682
191367 10/19/09 09:01 Anusha Target 52Cr current 7.5 uA VISUAL SCALERS, Run # 76681
191366 10/19/09 09:01 Petkovic BPM & BCM Run # 76681
191365 10/19/09 08:56 Arshak ROC 14 error at the end of run#76669, almost 3.7M events
191364 10/19/09 08:55 Arshak 6:15 Beam is OFF, MCC is doing some tests, beam will back approximately 5-10min, as MCC told
191363 10/19/09 08:55 Arshak 6:40 Beam is back
191360 10/19/09 08:24 Petkovic BPM & BCM, Run # 76680
191359 10/19/09 08:14 Anusha Target 52Cr current 7.5 microamps VISUAL SCALERS, Run # 76680
191358 10/19/09 08:01 cdaq Beam Time Accounting
191357 10/19/09 08:01 Arshak OWL Shift summary
191352 10/19/09 07:23 P Achenbach Visual scalers for run#76679
191349 10/19/09 07:01 P Achenbach Visual scalers for run#76678
191348 10/19/09 06:40 Arshak 6:40 Beam is back
191344 10/19/09 06:20 Arshak 6:15 Beam is OFF, MCC is doing some tests, beam will back approximately 5-10min, as MCC told
191342 10/19/09 06:15 P Achenbach Visual scalers for run#76677
191336 10/19/09 05:09 P Achenbach Visual scalers for run#76676
191332 10/19/09 05:01 P Achenbach Visual scalers for run#76675
191329 10/19/09 03:53 P Achenbach Visual scalers for run#76674
191328 10/19/09 03:52 P Achenbach Visual scalers for run#76673
191320 10/19/09 02:40 P Achenbach Visual scalers for run#76672
191319 10/19/09 02:37 P Achenbach Visual scalers for run#76671
191313 10/19/09 01:49 P Achenbach Visual scalers for run#76670
191312 10/19/09 01:43 chench HV of drift chamber at beam current 7.5uA, run#76670
191311 10/19/09 01:26 P Achenbach HKS drift chamber HV changed by 5 V
191309 10/19/09 01:20 Arshak ROC 14 error at the end of run#76669, almost 3.7M events
191304 10/19/09 00:47 P Achenbach Visual scalers for run#76669
191302 10/19/09 00:32 P Achenbach bpm and bcm run #76668
191301 10/19/09 00:28 cdaq Beam Time Accounting
191300 10/19/09 00:27 Reinhold RC: owl shift plan (kind of obvious)
191299 10/19/09 00:14 P Achenbach Visual scalers for run#76668
191296 10/19/09 00:00 Gogami Shift_summury[swing-18Oct2009] Run76652->Run76667
Sunday
191293 10/18/09 23:39 Gogami C HVs screenshot[52Cr@7.5[uA]/Run76667]
191292 10/18/09 23:37 Gogami BPM and BCM screenshot[52Cr@7.5[uA]/Run76667]
191291 10/18/09 23:36 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76667]
191288 10/18/09 22:59 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76666]
191285 10/18/09 22:32 kawama Analysis: SS analysis, a good picture and a bud picture
191284 10/18/09 22:25 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76664] ==> worng{HES3 = 5.98 MHz },correct{HES3=4.98MHz}
191283 10/18/09 22:24 lgan Analysis: reply run76665,pdf
191282 10/18/09 22:23 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76665]
191281 10/18/09 22:19 Gogami DC HVs screenshot[52Cr@7.5[uA]/Run76665]
191276 10/18/09 21:47 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76664]
191275 10/18/09 21:47 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76664]
191274 10/18/09 21:43 Gogami BPM and BCM screenshot[52Cr@7.5[uA]/Run76664]
191272 10/18/09 21:33 Gogami End failed run76663
191269 10/18/09 20:59 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76663]
191266 10/18/09 20:46 Gogami This is not 8[uA]. Correct value is 8.6[uA].
191265 10/18/09 20:27 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76662]
191264 10/18/09 20:24 Gogami DC HVs screenshot[52Cr@7.5[uA]/Run76662]
191263 10/18/09 20:19 Gogami BPM and BCM screenshot[52Cr@7.5[uA]/Run76662]
191262 10/18/09 20:17 Gogami Beam: Beam is back. now 7.5[uA] on 52Cr.
191259 10/18/09 20:12 Gogami Run76660 is JUNK [see==>entry#191252]
191258 10/18/09 20:09 Gogami Run76661 was ended soon because beam was stopped.
191257 10/18/09 20:07 Gogami Beam: Beam is stopped and will be back in 10 minutes.
191256 10/18/09 20:05 Gogami Kill all and DAQ is recoverd .
191252 10/18/09 19:57 Gogami Error in ROC7[Run76660]
191246 10/18/09 19:26 Gogami Rates from Visual scalers[52Cr@7.5uA/Run76659]
191245 10/18/09 19:23 Gogami DC HVs screenshot[52Cr@7.5[uA]/Run76659]
191242 10/18/09 19:10 chench Keep the HV of HDC1 in 1930V
191241 10/18/09 19:08 Gogami BPM and BCM screen shot[52Cr@7.5[uA]/Run76658]
191240 10/18/09 19:03 lgan Analysis: run76657.pdf
191239 10/18/09 18:59 Gogami Rates form Visual scalers[52Cr@7.5uA/Run76658]
191238 10/18/09 18:52 Gogami Coin rate at 8.0[uA] on 52Cr-target ==> 2.97[kHz]
191237 10/18/09 18:48 chench Additional information: Hits per plane before the tracking cut of HKS dritt chamber run#76651
191235 10/18/09 18:40 chench Correction: The run# is 76649 and 76651
191233 10/18/09 18:40 lgan Analysis: reply run76657.pdf
191232 10/18/09 18:36 Gogami sorry, This run is JUNK[E02017 Run 1430]
191228 10/18/09 18:24 Gogami BPM and BCM screen shot[52Cr@7.5[uA]/Run76657]
191227 10/18/09 18:21 chench HV of drift chambers for beam current 7.5uA and target Cr52
191225 10/18/09 18:19 Gogami Rates form Visual scalers[52Cr@7.5uA/Run76657]
191224 10/18/09 18:19 Gogami Rates form Visual scalers[52Cr@7.5uA/Run76657]
191223 10/18/09 18:10 Gogami Event recorder was unstavle in this Run [Run76655 and Run76656].
191222 10/18/09 18:10 chench Additional disccussion for the trackable events
191221 10/18/09 18:08 Chiba Cut condition
191220 10/18/09 18:08 Gogami Asked MCC,decrease the beam current to 7.5[uA] (from Run76657)
191218 10/18/09 17:54 Gogami Asked MCC , increase the beam current to 8[uA]
191216 10/18/09 17:50 chench what is the better beam current?
191215 10/18/09 17:47 chiba WC threshold changed (80,100) (low,high) => (100,120)(low,high)
191214 10/18/09 17:44 lgan dead channel is fixed
191211 10/18/09 17:36 Gogami Run was ended at 2.2M . because of missing channel in KTOF1X-11T(see==>191210)
191210 10/18/09 17:33 lgan SMS: dead channel
191208 10/18/09 17:24 Reinhold Killed some replay jobs on cdaql4
191207 10/18/09 17:20 Gogami Rates form Visual scalers[52Cr@7.3uA/Run76653] after WC threshold changed
191206 10/18/09 17:19 Reinhold 8 uA on Cr should be possible after WC threshold adjustment
191205 10/18/09 17:10 Chiba WC threshold changed (80,100) (low,high) => (100,120)(low,high) before Run76653
191200 10/18/09 17:03 Tang HDC1 HV can be raised by another 10V
191199 10/18/09 16:52 Gogami DCs HV screenshot[52Cr@7.3uA/Run76652]
191198 10/18/09 16:50 Gogami Rates form Visual scalers[52Cr@7.3uA/Run76652]
191197 10/18/09 16:47 lgan reply .pdf file
191196 10/18/09 16:41 Gogami BPM and BCM screen shot[52Cr@7.3uA/Run76652]
191193 10/18/09 16:16 Reinhold Delayed entry: 52Cr running conditions for 6 uA beam
191192 10/18/09 16:09 chench Updated leakage current of drift chamber current 7.3uA and Target Cr52
191191 10/18/09 16:02 cdaq Beam Time Accounting
191190 10/18/09 16:01 Petkovic Day Shift Summary
191189 10/18/09 16:00 Reinhold During run 76650 adjust drift chamber (DC) high voltage (HV)
191188 10/18/09 15:59 Seva Visual scalers for run#76651
191187 10/18/09 15:57 seva Run#76651 BCM&BPM
191184 10/18/09 15:55 Seva Visual scalers for run#76650
191183 10/18/09 15:52 seva beam change to 7.3uA, Cr52 target; stable
191180 10/18/09 15:41 Tang Raise HDC1 &2 and EDC2 HV's
191179 10/18/09 15:38 Reinhold WC threshold for Cr running?
191178 10/18/09 15:32 Seva Visual scalers for run#76649
191177 10/18/09 15:30 seva Run#76649 BCM&BPM
191173 10/18/09 15:08 chench The HV of Drift chamber for current 6uA, and Target Cr52
191172 10/18/09 15:07 seva Run#76648 BCM&BPM
191171 10/18/09 15:07 Seva Visual scalers for run#76648
191170 10/18/09 15:06 Seva Visual scalers for run#76647
191167 10/18/09 14:36 Petkovic Target: 14:10 Target changed to 52Cr (no raster) with 6 uA (form Be9 with 40 uA)
191166 10/18/09 14:20 Reinhold Drifty chamber HV at 8 uA
191165 10/18/09 14:17 Reinhold Drift chamber HV at 6 uA
191164 10/18/09 14:17 seva Beam Current is changed to 6 microA from 5 microA
191162 10/18/09 14:15 seva Run#76647 BCM&BPM
191158 10/18/09 13:57 seva change of prescale factors: ps1=200;ps5=12000
191157 10/18/09 13:49 Reinhold Changed HD1&2 and EC2 HV
191154 10/18/09 13:43 Reinhold Instructions for drift chamber HV for Cr running
191151 10/18/09 13:07 Seva Visual scalers for run#76644
191150 10/18/09 13:03 seva Run#76644 BCM&BPM
191147 10/18/09 12:44 Petkovic Target: Prescaling factors for 52Cr target with beam currrent 8 microamps
191146 10/18/09 12:23 Seva Visual scalers for run#76643
191144 10/18/09 12:21 seva Run#76643 BCM&BPM
191140 10/18/09 11:38 Seva Visual scalers for run#76642
191139 10/18/09 11:34 seva Run#76642 BCM&BPM
191136 10/18/09 11:31 Petkovic Beam: 10:55 - 11:10 MCR disabled beam due to the IOC problem.
191135 10/18/09 11:05 Reinhold RC: run plan for Sunday; a few more runs Be, then Cr at ~ 1:30 pm
191132 10/18/09 11:01 seva Run#76641 BCM&BPM
191129 10/18/09 10:54 Petkovic 09:46 Continued data on Be9 with 40uA, with an improved conditions
191128 10/18/09 10:49 seva Run#76640 BCM&BPM
191127 10/18/09 10:44 Reinhold Controlled access: HES-D communication problem is resolved
191123 10/18/09 10:41 Reinhold Controlled access: Reboot IOC hlc3
191122 10/18/09 10:32 Petkovic Beam: Restricted Access Mode (MMCR) due to Hall C Ion Ch. issue; Reseted HES-D magnet
191121 10/18/09 09:37 Reinhold EH2-16T HV TRIP: fixed
191118 10/18/09 09:30 Reinhold End of Run #76638: HV crate 34 tripped a few minutes before end of run
191115 10/18/09 09:18 Seva ROC 7 errors, reboot of ROC 7 and coda
191111 10/18/09 08:29 Petkovic Keep going Be9 with 40 microamps. Proposal for the EH2 - 16T Trip Problem
191108 10/18/09 08:15 Seva Visual scalers for run#76636 (with EH2-16T off)
191107 10/18/09 08:10 seva Run#76636 BCM&BPM
191104 10/18/09 08:02 cdaq Beam Time Accounting
191103 10/18/09 08:02 Arshak OWL Shift Summary
191102 10/18/09 07:44 Arshak HV snapshot
191101 10/18/09 07:32 Arshak HES HODO TDC/ADC
191100 10/18/09 07:32 P Achenbach Visual scalers for run#76635 (with EH2-16T off)
191099 10/18/09 07:25 Arshak EH2-16T HV TRIP
191094 10/18/09 06:17 P Achenbach Visual scalers for run#76634
191089 10/18/09 05:26 P Achenbach Visual scalers for run#76633
191083 10/18/09 04:44 P Achenbach Visual scalers for run#76632
191080 10/18/09 04:00 P Achenbach Visual scalers for run#76631
191077 10/18/09 03:52 Arshak Beam Positions and FFB
191074 10/18/09 03:18 P Achenbach Visual scalers for run#76630
191071 10/18/09 02:46 maruta HES-D communication problem is still unsolved
191068 10/18/09 02:11 Arshak HES-D communication problem
191065 10/18/09 01:55 Reinhold HES communication problem
191064 10/18/09 01:46 P Achenbach Visual scalers for run#76628
191063 10/18/09 01:43 Arshak HES-D communication problem
191058 10/18/09 00:52 P Achenbach Visual scalers for run#76627
191055 10/18/09 00:41 P Achenbach Visual scalers for run#76626
191054 10/18/09 00:35 Reinhold Run #76626: FFB off for roughly 10 minutes
191053 10/18/09 00:13 Arshak Beam Positions
191050 10/18/09 00:01 cdaq Beam Time Accounting
Saturday
191049 10/17/09 23:57 Danagoulian Shift summary, and visual scalers
191048 10/17/09 23:43 Danagoulian BPM-BCM for the run 76625
191045 10/17/09 23:17 kawama BCM scaler channel in the parameter file of cdaq PC
191042 10/17/09 22:53 Danagoulian BPM-BCM snapshot, run # 76624
191039 10/17/09 22:10 Reinhold Re: BCM in the scaler
191038 10/17/09 22:10 Reinhold Re: BCM in the scaler
191036 10/17/09 22:00 Danagoulian BPM-BCM snapshot
191031 10/17/09 21:48 Danagoulian Beam was off
191030 10/17/09 21:47 Reinhold RC: night shift plan: continue taking data on Be target
191022 10/17/09 20:38 Danagoulian Visual scalers for run#76621
191021 10/17/09 20:36 Danagoulian BPM-BCM snapshot, run 76621
191018 10/17/09 20:28 Reinhold Re: BCM in the scaler
191015 10/17/09 19:55 Danagoulian Target BPM troubleshooting
191014 10/17/09 19:51 Danagoulian BPM screens are back on for the run 76620
191011 10/17/09 19:41 kawama BCM in the scaler
191007 10/17/09 18:47 Danagoulian Hall C BPM troubleshooting
191004 10/17/09 18:44 Reinhold RUN 76617: Target BPM signals aslo missing from coda EPICS events
191003 10/17/09 18:44 Reinhold RUN 76617: Target BPM signals aslo missing from coda EPICS events
191002 10/17/09 18:35 Reinhold Missing BPM signals
190999 10/17/09 18:13 Reinhold Seems you have problems with the IOC for the last grider.
190998 10/17/09 18:09 lgan Beam: BPM IOC crashed
190996 10/17/09 17:10 Danagoulian BPM-BCM snapshots, run 76616
190989 10/17/09 16:00 cdaq Beam Time Accounting
190988 10/17/09 15:55 Petkovic Day Shift Summary
190986 10/17/09 15:38 Seva Visual scalers for run#76614, target is Be-9, Beam current 40uA
190985 10/17/09 15:36 seva Run#76614 BCM&BPM
190981 10/17/09 15:30 Tang Kawama's Lambsa/Sigma spectrum was pleased by audiences at DNP
190980 10/17/09 14:53 Seva Visual scalers for run#76613, target is Be-9, Beam current 40uA
190979 10/17/09 14:51 seva Run#76613 BCM&BPM
190974 10/17/09 14:11 Seva Visual scalers for run#76612, target is Be-9, Beam current 40uA
190970 10/17/09 13:24 seva Run#76611 BCM&BPM
190969 10/17/09 13:22 Seva Visual scalers for run#76611, target is Be-9, Beam current 40uA
190965 10/17/09 13:12 Petkovic FFB Run # 76610
190964 10/17/09 12:41 Seva Visual scalers for run#76610, target is Be-9, Beam current 40uA
190963 10/17/09 12:39 seva Run#76610 BCM&BPM
190960 10/17/09 12:21 Reinhold Very clean beam for about an hour (BPM screens)
190957 10/17/09 12:11 Petkovic A Brief Report at the Middle of the Day Shift
190956 10/17/09 11:51 seva Run#76609 BPM&BCM
190955 10/17/09 11:50 Seva Visual scalers for run#76609, target is Be-9, Beam current 40uA
190952 10/17/09 11:10 seva Run#76608 BCM&BPM
190951 10/17/09 11:08 Seva Visual scalers for run#76608, target is Be-9, Beam current 40uA
190946 10/17/09 10:25 seva Run#76607 BCM&BPM
190945 10/17/09 10:23 Seva Visual scalers for run#76607, target is Be-9, Beam current 40uA
190940 10/17/09 09:39 Seva Visual scalers for run#76606, target is Be-9, Beam current 40uA
190939 10/17/09 09:38 seva Run#76606 BCM&BPM
190936 10/17/09 08:49 seva Run#76605 BCM&BPM
190935 10/17/09 08:46 Petkovic Beam: 8:35 - 8: 40 Rebooting Beam Contol System (ABU) by the MCR
190934 10/17/09 08:45 Seva Visual scalers for run#76605, target is Be-9, Beam current 40uA
190929 10/17/09 08:26 Seva Visual scalers for run#76604, target is Be-9, Beam current 40uA
190928 10/17/09 08:21 seva Run#76604 BCM&BPM
190927 10/17/09 08:20 Petkovic Shift Plan: Continued data Be9 with 40 microamps
190925 10/17/09 08:04 Arshak OWL Shift Summary
190923 10/17/09 08:02 cdaq Beam Time Accounting
190922 10/17/09 07:57 Reinhold RC: Day shift plan; for now continue taking data on Be target
190919 10/17/09 07:32 P Achenbach Visual scalers for run#76603, target is Be-9, Beam current 40uA
190915 10/17/09 06:45 P Achenbach Visual scalers for run#76602, target is Be-9, Beam current 40uA
190912 10/17/09 06:15 Arshak Beam Position after Beam is back
190911 10/17/09 05:58 P Achenbach Visual scalers for run#76601, target is Be-9, Beam current 40uA
190910 10/17/09 05:55 Arshak 5:55 Beam is back
190903 10/17/09 05:22 Arshak 5:00 Beam is OFF, MCC have a problem with RS
190899 10/17/09 04:52 P Achenbach Visual scalers for run#76599, target is Be-9, Beam current 40uA
190896 10/17/09 04:11 P Achenbach Visual scalers for run#76598, target is Be-9, Beam current 40uA
190893 10/17/09 03:27 P Achenbach Visual scalers for run#76597, target is Be-9, Beam current 40uA
190888 10/17/09 02:44 P Achenbach Visual scalers for run#76596, target is Be-9, Beam current 40uA
190883 10/17/09 02:07 P Achenbach Visual scalers for run#76595, target is Be-9, Beam current 40uA
190882 10/17/09 02:05 P Achenbach bpm and bcm
190879 10/17/09 01:39 P Achenbach bpm and bcm and ffb
190878 10/17/09 01:17 P Achenbach Visual scalers for run#76594, target is Be-9, Beam current 40uA
190873 10/17/09 00:31 Arshak Visual scalers for run#76593, target is Be-9, Beam current 40uA
190870 10/17/09 00:12 Arshak Beam Position
190869 10/17/09 00:01 cdaq Beam Time Accounting
190868 10/17/09 00:00 Danagoulian Shift summary
Friday
190864 10/16/09 23:32 chench HES sieve slit analysis result after change the cut sequence from run=75460
190862 10/16/09 22:52 Danagoulian BPM, BCM snapshot run # 76591
190859 10/16/09 22:43 Tang The way you made separation is incorrect
190854 10/16/09 21:44 Danagoulian BPM snapshot, run 76589
190853 10/16/09 21:29 chench HES sieve slit data analysis result from run=75460
190850 10/16/09 20:43 Danagoulian BPM snapshot. Run 76588
190844 10/16/09 19:44 Zhihong Ye Lambda & Sigma Resolution using other fitting method-Sigma is not that bad :-)
190842 10/16/09 19:16 Danagoulian BPM, BCM Snapshot,run 76586
190839 10/16/09 18:56 chench The efficiency of the Dfift chamber
190838 10/16/09 18:42 Danagoulian BPM, BCM snapshot run 76585
190837 10/16/09 18:39 chench HV of Drift Chambers with beam current=40uA, target Be9
190836 10/16/09 18:24 Gogami Analysis: 3 mountains in EHODO hitpattern
190833 10/16/09 18:07 kawama Rough calculation of QF carbon event in CH2 data
190832 10/16/09 17:29 shoh grouping puzzle
190831 10/16/09 17:28 Danagoulian BPM, BCM snapshot, run 76584
190827 10/16/09 17:00 Reinhold Call to MCC: 3H03BY pos off by 0.2 mm
190826 10/16/09 16:56 Danagoulian BPM Snapshot, run 76583
190822 10/16/09 16:25 Reinhold Wrong Beam Position for last 1.5 hrs
190820 10/16/09 16:20 Petkovic Day Shift Summary
190817 10/16/09 16:06 cdaq Beam Time Accounting
190816 10/16/09 16:03 Petkovic BPM & BCM, Run # 76581
190815 10/16/09 15:56 Harikhanal Entry 190414 corresponds to run #76581
190814 10/16/09 15:48 Harikhanal Be 9 with 40 uA Visual scaler , Run#76578
190811 10/16/09 15:39 Petkovic CODA Rebooted. New prescaling factors for Run # 76580
190810 10/16/09 15:25 Petkovic/Kha BPM & BCM Run # 76580
190809 10/16/09 15:20 Nue Coin rate for 10uA
190804 10/16/09 14:55 Harikhanal Be 9 with 40 uA Visual scaler , Run#76577
190803 10/16/09 14:46 Petkovic Run # 76576 BPM & BCM, Be9 with 40 microasmps
190802 10/16/09 14:39 Petkovic HDC1 - F2 Voltage detected being "OFF" due to the empty histos via Replay Run # 76576
190801 10/16/09 14:38 kawama cointime still need to be modified
190798 10/16/09 14:15 Petkovic Checking of rates for Be9 with 40 microapms, Run # 76576 (real run)
190794 10/16/09 13:36 Petkovic Test Run: Target Be9 with current 10 uA (while MCR doing DW tuning)
190792 10/16/09 13:14 saw Try edmmonticello again
190791 10/16/09 12:48 Reinhold Monticello not starting
190790 10/16/09 12:11 Reinhold At request of MCC go to empty target; they'll look at DW tuning.
190789 10/16/09 12:07 Reinhold Call from MCC: ion chamber trips above 10 uA; go to viewer mode
190788 10/16/09 11:58 Petkovic BPM & BCM, beam at 11:40. Current 10 uA, Be9
190787 10/16/09 11:43 Petkovic Target: Target Be9 positioned for the Beam of 40 microamps
190786 10/16/09 11:39 Reinhold RC report/plan
190783 10/16/09 09:55 yuan Be9 running conditions for your reference
190782 10/16/09 09:50 yuan Beam current should be 40 uA for run # 76311
190781 10/16/09 09:21 Petkovic Beam: Plan to use Beam for the CH2 Calibration (several next runs)
190776 10/16/09 08:02 cdaq Beam Time Accounting
190775 10/16/09 08:01 Simon Owl Shift Summary
190772 10/16/09 06:19 Simon beam
190766 10/16/09 04:42 Simon beam
190765 10/16/09 03:43 Simon beam has gone
190759 10/16/09 03:13 Seva Run# 76574 Visual Scalers
190758 10/16/09 03:12 seva Run#76574 Fast Raster Replay
190757 10/16/09 03:08 seva Run#76574 BCM&BPM
190754 10/16/09 02:32 Seva Run# 76573 Visual Scalers
190753 10/16/09 02:32 seva Run#76573 Fast Raster Replay
190751 10/16/09 02:26 seva Run#76573 BCM&BPM
190747 10/16/09 01:42 Seva Run# 76572 Visual Scalers
190746 10/16/09 01:37 seva Run#76572 Fast Raster Replay
190745 10/16/09 01:36 seva Run#76572 BCM&BPM
190742 10/16/09 01:06 Seva Run# 76571 Visual Scalers
190741 10/16/09 01:03 seva Run#76571 BPM&BCM
190740 10/16/09 01:02 seva Run#76571 Fast Raster Replay
190735 10/16/09 00:30 seva Run# 76570 Visual Scalers
190734 10/16/09 00:24 seva Run#76570 Fast Raster Replay
190733 10/16/09 00:23 seva Run#56570 BPM&BCM
190730 10/16/09 00:05 VM Rodriguez Swing Shift Summary
190728 10/16/09 00:04 cdaq Beam Time Accounting
190727 10/16/09 00:01 VM Rodriguez Flushing Fission Chamber
Thursday
190725 10/15/09 23:41 VM Rodriguez Run# 76569 Fast Raster Reply
190724 10/15/09 23:40 VM Rodriguez Run# 76569 Visual Scalers
190723 10/15/09 23:37 VM Rodriguez Run# 76569 BPM & BCM
190721 10/15/09 23:35 VM Rodriguez Move CH2 Target to 146.74 mm.
190719 10/15/09 23:10 VM Rodriguez Run# 76568 Visual ScaleRs
190718 10/15/09 23:09 VM Rodriguez Run# 76568 BPM&BCM
190717 10/15/09 23:08 VM Rodriguez Run# 76568 Fast Raster Replay
190714 10/15/09 22:36 VM Rodriguez Run# 76567 Visual Scales
190713 10/15/09 22:34 VM Rodriguez Run# 76567 Fast Raster Replay
190712 10/15/09 22:29 VM Rodriguez Run# 76567 BPM and BCM Pictures
190707 10/15/09 22:10 VM Rodriguez Run# 76566 Fast Raster Replay
190706 10/15/09 22:07 VM Rodriguez Run#76565 Fast Raster Replay
190705 10/15/09 22:06 VM Rodriguez Move CH2 Target to 147.74 mm.
190704 10/15/09 21:59 VM Rodriguez No beam because MCC is changing a Power Supply of Component MBS04B13
190697 10/15/09 21:00 VM Rodriguez Run# 76565 Visual Scales
190696 10/15/09 20:57 VM Rodriguez Run# 76565 BPM & BCM Pictures
190693 10/15/09 20:35 VM Rodriguez Run# 76564 Visual Scales
190692 10/15/09 20:33 VM Rodriguez Run# 76564 Fast Raster Replay
190691 10/15/09 20:27 VM Rodriguez BPM & BCM Pictures for Run# 76564
190688 10/15/09 20:22 Gogami Analysis: HES Butterfly
190687 10/15/09 20:21 VM Rodriguez Reposition the CH2 Target to 148.74 mm
190686 10/15/09 20:10 VM Rodriguez Change Prescale Factors
190683 10/15/09 19:35 Nue MCC sends 10uA for energy measurement
190681 10/15/09 19:11 VM Rodriguez Change Prescale Factors
190679 10/15/09 18:56 Reinhold Greetings from Victor (we'll need to make him pay for this ;-)
190678 10/15/09 18:51 Reinhold Runs 76380 -- 76562: aerogel cherenkov signal study with LED triggered events
190677 10/15/09 18:50 VM Rodriguez Flushing Fission Chamber
190675 10/15/09 18:20 VM Rodriguez Change Prescale Factors
190674 10/15/09 18:17 bono turned off trigger to LED for AC
190672 10/15/09 18:13 yuan Run 76379 taken after beam off
190663 10/15/09 18:05 yuan run 76379 is junk
190634 10/15/09 17:35 Tang Beautiful and great work! Is Run#76379 good or junk run?
190607 10/15/09 17:08 VM Rodriguez Update: no beam for at least 3 more hours
190557 10/15/09 16:22 kawama lambda/sigma status
190535 10/15/09 16:01 cdaq Beam Time Accounting
190530 10/15/09 15:57 Abdellah Swing Shift summary
190528 10/15/09 15:56 Nue Confirmed HV for EDC, HDC are off, Bill is working on gas sensor in the gas shed
190474 10/15/09 15:02 shoh The rate of lambda for Cr target (Calculation)
190431 10/15/09 14:21 bono run 76446 and 76445
190380 10/15/09 13:31 bono run 76422 is junk
190361 10/15/09 13:13 bono run 76413 is junk
190333 10/15/09 12:44 Abdellah beam might be back at 2:30 PM
190307 10/15/09 12:16 yuan WC1-2T HV swap back
190286 10/15/09 11:30 Arshak Is it updated in hks09-HVGUI? WC1-2T HV cable was plugged in Counting House 2-nd floor crate #35 channel 31.
190284 10/15/09 11:03 Reinhold Set trigger to LED for AC
190281 10/15/09 10:37 Abdellah Beam off for injector work
190279 10/15/09 10:18 P Achenbach fast raster replay 76378
190278 10/15/09 10:18 Abdellah Visual scalers, run 76378
190275 10/15/09 10:02 P Achenbach bcm and bpm at 10:00 am
190274 10/15/09 09:59 P Achenbach fast raster replay 76376
190271 10/15/09 09:54 P Achenbach fast raster replay 76377
190270 10/15/09 09:48 Abdellah Visual scalers, run 76377
190267 10/15/09 09:18 Abdellah Visual scalers, run 76376
190266 10/15/09 09:16 P Achenbach fast raster replay 76376
190263 10/15/09 08:52 yuan Status and plan ( from RC)
190261 10/15/09 08:47 Abdellah Injector work at 10:30
190260 10/15/09 08:45 P Achenbach fast raster replay 76375
190259 10/15/09 08:42 Abdellah Visual scalers, run 76375
190258 10/15/09 08:42 Abdellah Visual scalers, run 76375
190254 10/15/09 08:28 Abdellah Visual scalers, run 76374
190253 10/15/09 08:08 P Achenbach fast raster replay 76374
190252 10/15/09 08:06 cdaq Beam Time Accounting
190248 10/15/09 08:01 P Achenbach bpm and bcm at 8:00 am
190247 10/15/09 07:58 Petkovic Owl (Night) Shift Summary
190246 10/15/09 07:32 Petkovic Beam: Beam coming --> postponed to 8:00, due to the RF problems on 2 magnets (MCR)
190243 10/15/09 06:41 Petkovic Beam: TIMING (Properties) of the Run # 76373
190240 10/15/09 05:51 Tang How long is the actual beam on target time for Run76373?
190239 10/15/09 05:34 Petkovic Beam: Beam off for about 1 hour --> to fix only one QM in the Beam line (MCR)
190234 10/15/09 05:04 Tang Please record BPM display after beam comes back
190232 10/15/09 04:58 Tang Number of Sigma collected up to Run #76372 should be around 713
190230 10/15/09 04:43 Petkovic Stopped Beam -- > to fix Magnet problem (MCR)
190229 10/15/09 04:13 Petkovic/Kha CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76373
190227 10/15/09 04:07 Khanal/Petko Reply fast raster #76373
190223 10/15/09 03:33 Petkovic/Kha CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76372
190222 10/15/09 03:32 Khanal/Petvo Reply for fast Rastar #76372
190219 10/15/09 03:08 Petkovic/Kha CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76371
190218 10/15/09 03:02 Khanal/Petvo Reply for fast rastar#76371
190217 10/15/09 03:01 Petkovic Analysis: CODA rebooted at the end of Run # 76370
190213 10/15/09 02:29 Petkovic/Kha CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76370
190212 10/15/09 02:25 Khanal/Petvo Reply fast Raster #76370
190208 10/15/09 02:03 Petkovic/Kha CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76369
190206 10/15/09 01:52 Khanal/Petko Fast Raster reply #76369
190203 10/15/09 01:29 Petkovic/Kha CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76368
190202 10/15/09 01:17 Khanal/Petko Faster Raster reply run no #76368
190199 10/15/09 00:53 Petkovic/Kha CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76367
190196 10/15/09 00:49 Khanal/Petko Fast Raster Reply #76367
190195 10/15/09 00:47 kawama started new copymaker
190192 10/15/09 00:14 VM Rodriguez Run# 76352 Visual Scale
190191 10/15/09 00:10 cdaq Beam Time Accounting
190190 10/15/09 00:04 shoh pictures of 190187
190189 10/15/09 00:04 Abdellah Swing Shift summary
190188 10/15/09 00:03 Harikhanal Visual Scalers run#76366, with garget CH2 in current ~2uA
190187 10/15/09 00:02 shoh The number of QF (Cr target)
Wednesday
190185 10/14/09 23:48 Simon run #76366 fast raster
190181 10/14/09 23:24 Simon Run# 76365 Visual Scale
190180 10/14/09 23:20 Simon run #76365 fast raster
190179 10/14/09 23:16 Simon Event #76365 is junk
190176 10/14/09 23:01 Gogami Analysis: EHODO hitpat in different condition run ==> Mollor-electron
190175 10/14/09 22:40 Simon Run# 76363 Visual Scale
190174 10/14/09 22:38 Simon run #76363 fast raster
190169 10/14/09 22:05 Simon Run# 76362 Visual Scale
190168 10/14/09 22:01 Simon run #76362 fast raster
190165 10/14/09 21:37 yuan CH2 target moving distance change to 2 mm each step from 9:30 pm, 10/14/2009
190164 10/14/09 21:36 Simon Run# 76361 Visual Scale
190161 10/14/09 21:27 Simon run #76361 fast raster
190157 10/14/09 21:00 Simon Run# 76360 Visual Scale
190156 10/14/09 20:54 Simon run #76360 BPM
190155 10/14/09 20:54 Simon run #76360 fast raster
190150 10/14/09 20:19 Simon Run# 76359 Visual Scale
190149 10/14/09 20:15 Simon run #76359 fast raster
190148 10/14/09 20:12 abdellah ROC 7 error
190145 10/14/09 19:54 Simon Run# 76358 Visual Scale
190144 10/14/09 19:46 Simon run #76358 fast raster
190141 10/14/09 19:22 Simon Run# 76357 Visual Scale
190139 10/14/09 19:16 Simon run #76357 BPM
190138 10/14/09 19:15 Simon run #76357 fast raster
190134 10/14/09 18:47 Simon Run# 76356 Visual Scale
190133 10/14/09 18:42 Simon run #76356 fast raster
190130 10/14/09 18:17 Simon Run# 76355 Visual Scale
190129 10/14/09 18:17 Simon Run# 76355 Visual Scale
190128 10/14/09 18:11 Simon run #76355 BPM
190127 10/14/09 18:09 Simon run #76355 fast raster
190122 10/14/09 17:48 Simon Run# 76354 Visual Scale
190121 10/14/09 17:40 Simon run #76354 fast raster
190119 10/14/09 17:28 Chiba WC 1-2T ADC has been fine.
190117 10/14/09 17:10 Simon run #76353 BPM information
190116 10/14/09 17:08 Simon Run #76353 fast raster
190115 10/14/09 17:03 Simon Run# 76353 Visual Scale
190114 10/14/09 17:01 Reinhold Re: A figure makes you happier
190109 10/14/09 16:18 kawama Wrong explanation
190107 10/14/09 16:09 kawama krd macros committed (rev.257)
190106 10/14/09 16:01 VM Rodriguez Day Shift Summary
190105 10/14/09 16:01 cdaq Beam Time Accounting
190101 10/14/09 15:31 VM Rodriguez No beam in next 2 hours due to cleaning of injectors by MCC
190098 10/14/09 15:22 VM Rodriguez Run# 76352 Visual Scale
190095 10/14/09 15:12 P Achenbach fast raster replay 76351
190094 10/14/09 14:58 doi distribution at SS(HES side)
190093 10/14/09 14:46 VM Rodriguez Run# 76351 Visual Scalers
190092 10/14/09 14:44 Zhihong Ye Analysis: Very beautiful! Some questions
190089 10/14/09 14:32 Zhihong Ye Analysis: Kaon Beta, Lambda Missing Mass for CH2 Run76312~766316
190088 10/14/09 14:25 kawama run# correction
190087 10/14/09 14:21 kawama Analysis: A figure makes you happier
190086 10/14/09 14:19 VM Rodriguez Run# 76350 Visual Scalers
190085 10/14/09 14:17 P Achenbach fast raster replay 76350
190082 10/14/09 14:04 kawama The status of carbon missing mass
190079 10/14/09 13:42 VM Rodriguez Run# 76349 Visual Scalers
190078 10/14/09 13:40 P Achenbach fast raster replay 76349
190077 10/14/09 13:37 Chiba WC 1-2T ADC signal looks better
190072 10/14/09 13:02 VM Rodriguez Run# 76348 Visual Scalers
190071 10/14/09 13:00 P Achenbach fast raster replay 76348
190069 10/14/09 12:57 kawama Carbon cointime spectrum before/after run76092
190068 10/14/09 12:41 Reinhold Run #76347: find WC1 ADC cable plugged in wrong
190066 10/14/09 12:27 VM Rodriguez Run# 76347 Visual Scalers
190065 10/14/09 12:26 P Achenbach fast raster replay 76347
190062 10/14/09 12:15 P Achenbach fast raster replay 76346
190061 10/14/09 12:15 Chiba WC 1-2T ADC channel missing again
190052 10/14/09 10:20 yuan ROC and DAQ rebooted
190051 10/14/09 10:17 VM Rodriguez Run# 76344 Visual Scalers
190049 10/14/09 10:13 VM Rodriguez Due to a valve problem, there will be no beam for 1 or 2 hours
190047 10/14/09 10:12 P Achenbach fast raster replay 76344
190043 10/14/09 09:36 VM Rodriguez Run# 76343 Visual Scalers
190042 10/14/09 09:35 P Achenbach fast raster replay 76343
190040 10/14/09 09:29 yuan Status and plan (from RC)
190039 10/14/09 09:28 P Achenbach fast raster replay 76342
190035 10/14/09 09:23 P Achenbach fast raster replay run 76342
190034 10/14/09 09:08 VM Rodriguez Run# 76342 Visual Scalers
190031 10/14/09 08:48 VM Rodriguez Run# 76341 Visual Scalers
190030 10/14/09 08:46 Chiba pull out WC ADC plug and checked signal, and restored
190029 10/14/09 08:41 P Achenbach fast raster replay 76341
190027 10/14/09 08:25 Chiba WC missing channel (solved?) and AC missing channnel
190023 10/14/09 08:05 cdaq Beam Time Accounting
190021 10/14/09 07:58 chenh visual scarlers for run#76340
190020 10/14/09 07:54 chench Fast raster analysis for run#76340
190017 10/14/09 07:32 chench Fast raster analysis for run#76339
190016 10/14/09 07:28 Chunchua/Pet CH2 target (raster on) current 2 uA --> VISUAL SCALERS Run # 76339
190015 10/14/09 07:27 Gogami histograms Run76339
190014 10/14/09 07:20 chench Beam position and FFB after the target move to 178.20mm, run#76339
190010 10/14/09 07:12 Gogami histograms Run76338
190008 10/14/09 06:45 chench Fast raster for run#76338
190007 10/14/09 06:41 Chunchua/Pet CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76338
190004 10/14/09 06:16 chench Fast raster for run#76337
190003 10/14/09 06:11 chench visual scalers run#76337
190002 10/14/09 06:05 chench Beam position and FFB after the target move to 179.20mm at 6:00am
190001 10/14/09 06:04 Gogami histograms Run76337
189999 10/14/09 05:59 chench Since the beam has already on the target for around one hour, we decide to move the target by 1mm
189998 10/14/09 05:54 chench The errors come from DAQ run#76336
189996 10/14/09 05:49 chench HV of drift chambers
189995 10/14/09 05:46 Petkovic Fission CH Purged --> Started Run with Beam current 2 microapms (CH2 target)
189994 10/14/09 05:45 chench fast raster for run#76336
189992 10/14/09 05:43 chench visual scalers run#76336
189991 10/14/09 05:42 Gogami histograms Run76335==>Run76336
189990 10/14/09 05:41 Gogami histograms Run76335
189989 10/14/09 05:39 chench Beam position and FFB after beam come back
189988 10/14/09 05:35 chench Beam is back, and current is 2uA
189984 10/14/09 05:27 Gogami Histograms Run76335
189983 10/14/09 05:27 Gogami Histograms Run76335
189979 10/14/09 05:21 chench Mcc called the beam would down for around 10minutes, stop both HKS run and fission run
189976 10/14/09 05:04 chench Fast raster for run76335
189975 10/14/09 05:03 Chunchua/Pet CH2 target (raster on) beam current 2 uA --> VISUAL SCALERS Run # 76335
189974 10/14/09 04:58 chench Beam position and FFB for run#76335 and target position is 180.20mm
189971 10/14/09 04:30 chench Fast rast analysis run#76334
189970 10/14/09 04:27 Gogami histograms Run76334
189969 10/14/09 04:27 chench Visual Scalers run#76334
189966 10/14/09 04:03 chench Sorry for the crab during the beam permit time, here is the correction for beam position and FFB run#76333
189965 10/14/09 04:00 chench Fast Raster for run#76333
189964 10/14/09 03:58 Chunchua/Pet CH2 target with Raster, current 2 uA --> VISUAL SCALERS Run # 76333
189963 10/14/09 03:55 chench Beam position and FFB after move the target to 181.20mm
189962 10/14/09 03:52 Gogami histograms Run76333
189959 10/14/09 03:43 chench beam position and FFB after beam tripped for around 5min
189958 10/14/09 03:35 Gogami histograms Run76332
189957 10/14/09 03:21 chench Fast rast for run376332, the gap becomes deeper
189956 10/14/09 03:15 chench Visual Scalers run#76332
189955 10/14/09 03:13 Gogmai Histograms check with cdaq doesn't work now
189952 10/14/09 02:54 Gogami histograms Run76331
189951 10/14/09 02:53 chench Visual Scalers run#76331
189950 10/14/09 02:53 Petkovic Fission Chamber Purged --> Started Run with a beam current 2 microapms, CH2 target
189949 10/14/09 02:50 chench Fast raster for run#76331
189947 10/14/09 02:40 chench FFB and Beam position after move the target again run#76331
189943 10/14/09 02:24 chench There is a deep gap, after check the visual scalers once and once again, we decide to keep running
189942 10/14/09 02:18 chench FAST RASTER for run#76330
189941 10/14/09 02:14 Chunchua/Pet CH2 target, current 2 microapms --> Visual Scalers Run# 7633040uA
189940 10/14/09 02:14 histograms Run76330
189937 10/14/09 01:54 chench fission chamber refill the gas just before this run
189936 10/14/09 01:50 chench Visual Scalers run#76329
189935 10/14/09 01:47 Gogami histograms Run76328
189934 10/14/09 01:47 chench Fast rast for run=76329
189932 10/14/09 01:39 chench FFB and beam position after move the target run=76329
189930 10/14/09 01:15 chench Fast rast for run=76328
189929 10/14/09 01:14 chench Visual Scalers run#76328
189926 10/14/09 00:56 chench Fast rast for run=76327
189925 10/14/09 00:53 chench Visual Scalers run=76327
189924 10/14/09 00:49 histograms Run76327
189923 10/14/09 00:47 chench fast raster for run=76326
189922 10/14/09 00:42 chench FFB and beam position for run = 76327
189919 10/14/09 00:24 cdaq Beam Time Accounting
189918 10/14/09 00:12 chench Visual Scalers run#76326, beam current=2uA and target=CH2
189917 10/14/09 00:09 Hari Khanal Shift summary ( swing 13 oct -13)
189916 10/14/09 00:07 shichijo I am very sorry
189915 10/14/09 00:07 kawama Probably the modification of rev.244 was wrong.
189914 10/14/09 00:02 shichijo I am sorry
189912 10/14/09 00:00 kawama EDC missing slot problem was fixed; MAP file was wrong
Tuesday
189910 10/13/09 23:54 shichijo fast raster pattern and visual scaler rates for run #76325
189905 10/13/09 23:13 kawama At least no data after decoding
189904 10/13/09 23:00 shichijo visual scaler rates and fast raster pattern for run#76324
189903 10/13/09 22:50 Nue Do EDC1 missing channels have scaler counts?
189900 10/13/09 22:42 yuan Modified CH2 target running procedure
189899 10/13/09 22:33 shichijo fast raster pattern run #76323 and rates
189898 10/13/09 22:30 Nue What I proposed is move the target 1mm in every hour
189897 10/13/09 22:24 kawama EDC1 has still missing slot
189896 10/13/09 22:18 Hari target position
189895 10/13/09 22:10 kawama EDC1 card swapped
189893 10/13/09 21:40 Hari Controll excess
189892 10/13/09 21:38 yuan CH2 Target move to #5 (position: 186.20 mm)
189891 10/13/09 21:35 shichijo fast raster pattern run #76322
189888 10/13/09 21:23 shichijo this run stopped to change target position to #5
189886 10/13/09 21:12 Tang Start to use CH2 of #5 position at the edge close to #6 target and move toward #3 at the edge close to #2 target
189884 10/13/09 21:05 shichijo visual scaler rates for run#76321
189882 10/13/09 20:52 shichijo fast raster pattern run #76321
189881 10/13/09 20:45 shichijo BPM and BCM screen shot
189878 10/13/09 20:37 Tang Remember what happened to the previous target ladder?
189877 10/13/09 20:22 shichijo It was run#76313
189876 10/13/09 20:13 shichijo fast raster pattern and visual scaler rates for run #76320
189875 10/13/09 19:57 shichijo EDC1 missing channel
189874 10/13/09 19:48 Hari target position
189872 10/13/09 19:42 shichijo fast raster pattern run #76319
189870 10/13/09 19:35 shichijo visual scaler rates for run#76319
189868 10/13/09 19:16 Reinhold Re: The number of lambda is decreased in run76316
189866 10/13/09 19:11 Reinhold Re: fast raster pattern run #76318: Note that X and Y are reversed
189865 10/13/09 18:57 Nue Some hydrogen may escape from the neighbor to the beam spot
189864 10/13/09 18:57 shichijo visual scaler rates for run#76138
189863 10/13/09 18:41 shichijo fast raster pattern run #76318
189862 10/13/09 18:32 kawama The number of lambda is decreased in run76316
189861 10/13/09 18:31 shichijo visual scaler rates for run#76137
189860 10/13/09 18:28 Hari Position of target
189859 10/13/09 18:23 shichijo fast raster pattern run #76317
189856 10/13/09 18:16 yuan Run conditions and monitors for CH2 target runs
189854 10/13/09 18:04 kawama pe vs pk correlation in CH2 run
189850 10/13/09 18:00 kawama merged ch2 missing mass (run76313-76315)
189849 10/13/09 17:55 Tang This is more of a statistical effect
189848 10/13/09 17:49 kawama The number of lambda in 76315
189847 10/13/09 17:46 Hari BCM and BPM information
189846 10/13/09 17:42 Gogami Chromium QF with cointime correction
189845 10/13/09 17:28 shichijo visual scaler rates for run#76136
189844 10/13/09 17:20 shichijo fast raster pattern run#76316
189843 10/13/09 17:19 Nue Vacuum snapshot CH2 2uA
189842 10/13/09 17:12 Hari Traget position
189840 10/13/09 17:08 shichijo target position change
189838 10/13/09 16:57 shichijo visual scaler raates #76315
189837 10/13/09 16:57 kawama The number of lambda in 75314
189836 10/13/09 16:37 shichijo visual scaler rates #76135 (CH2 2uA)
189835 10/13/09 16:30 Gogami Analysis: Chromium QF
189834 10/13/09 16:30 shichijo raster pattern for run#76315
189833 10/13/09 16:29 Gogami Analysis: Chromium QF
189832 10/13/09 16:29 Gogami Analysis: Chromium QF
189830 10/13/09 16:19 Reinhold How-To Fast Raster Replay
189829 10/13/09 16:12 Tang No surprise. My estimation with 2uA is ~120 Lambdas and ~27 Sigmas per hour.
189827 10/13/09 16:11 shoh hit pattern was no problem
189825 10/13/09 16:04 Tang You got it! My estimation was about 7 counts of Sigma should be collected by this run.
189824 10/13/09 16:02 cdaq Beam Time Accounting
189823 10/13/09 16:02 Reinhold Fast raster pattern depends on trigger type
189822 10/13/09 16:02 VM Rodriguez Day Shift Summary
189821 10/13/09 15:57 Nue Run instruction for CH2 target
189820 10/13/09 15:42 kawama Analysis: A quick analysis result of #76313, finaly we got sigma?
189819 10/13/09 15:36 VM Rodriguez Run#76314 CH2, 2uA 3x1 Raster
189818 10/13/09 15:33 Nue Some counter missing the timing?
189816 10/13/09 15:24 shoh kaon rate (CH2 targer) quick analysis
189814 10/13/09 15:13 kawama A quick analysis result of #76312
189813 10/13/09 15:06 Nue CH2 target was flat when it was made
189812 10/13/09 15:05 VM Rodriguez Asked MCC to go to Controlled Access
189811 10/13/09 15:03 Nue Hall went to control access
189810 10/13/09 14:58 Tang The raster pattern analysis has to be run for every run to decide change of location
189806 10/13/09 14:40 VM Rodriguez Run#76313 CH2, 2uA 3x1 Raster
189803 10/13/09 14:31 VM Rodriguez Run#76312 CH2, 2uA 3x1 Raster
189802 10/13/09 14:31 Reinhold Adjusted vertical raster amplifier gain
189800 10/13/09 14:20 Nue IC, FR for 2uA 1x3 FR on CH2
189798 10/13/09 14:14 VM Rodriguez Change the target to CH2
189797 10/13/09 14:13 VM Rodriguez Run#76311 Br9, 30uA No raster
189795 10/13/09 14:10 VM Rodriguez This is Run#76310
189794 10/13/09 14:08 Nue IC for 40uA on Be9
189793 10/13/09 14:05 VM Rodriguez Run# Br9, 30uA No raster
189787 10/13/09 13:54 Nue Be9 target is in now instaed of CH2
189785 10/13/09 13:48 VM Rodriguez Change the target to Be9
189784 10/13/09 13:46 VM Rodriguez Run# 76309 BeO, 2uA, 3x1 Beam Raster
189783 10/13/09 13:36 VM Rodriguez Change the target to CH2
189782 10/13/09 13:36 Gogami The Rates was decreasing in 10B Run(45uA and 40uA)
189779 10/13/09 13:31 Reinhold WC2 7-12 (?) discriminator width was too wide
189778 10/13/09 13:30 Chiba WC threshold changed before run 76310
189777 10/13/09 13:26 chench End the run failed , kill all and reset all, it works fine right now.
189776 10/13/09 13:23 Nue This run is a practice for CH2 prodcution data : Joerg is working on trigger modules.
189775 10/13/09 13:21 yez It seems that the hbeta distribution has problems but not WC
189772 10/13/09 13:10 Nue Raster 3x1
189771 10/13/09 13:07 Nue snapshot vacuum, ion chamber on BeO 2uA
189769 10/13/09 12:58 Nue Target: Effective area of CH2
189768 10/13/09 12:50 Tang Showed this to Spata and ACC guys?
189767 10/13/09 12:41 Chiba WC2lay 1-6 discriminator`s some out may have been bad?
189766 10/13/09 12:41 chench End the run failed , kill all and reset all, it works fine right now.
189765 10/13/09 12:40 Tang This appeared to timing offsets between groups.
189760 10/13/09 12:27 Nue Target: Target Ladder #2 was mounted
189751 10/13/09 12:04 Chiba WC threshold changed before run 76293
189747 10/13/09 11:42 VM Rodriguez Asked MCC to turn on Splitter Magnet
189745 10/13/09 11:39 chench Is the 'twin' from the the different gain match of the water chenrekov, analysis from run=76253?
189744 10/13/09 11:39 fanning Beam Time Accounting
189732 10/13/09 10:40 Reinhold WC1 1T 4B connector was not connceted properly after gate alignment
189723 10/13/09 09:17 yuan Status and report (from RC)
189720 10/13/09 09:11 fanning Beam Time Accounting
189719 10/13/09 09:02 VM Rodriguez Asked MCC to go to Restricted Access
189718 10/13/09 09:00 chench Change the trigger configration to selftrigger and ps4=10
189715 10/13/09 08:54 fanning Beam Time Accounting
189714 10/13/09 08:38 VM Rodriguez Asked MCC to turn off Splitter Magnet
189713 10/13/09 08:23 Petkovic Current 40 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76290)
189712 10/13/09 08:22 V.M.Rodrigue Target moved to empty
189711 10/13/09 08:16 Reinhold Re: WC NPE decreasing??
189706 10/13/09 08:03 cdaq Beam Time Accounting
189705 10/13/09 08:03 frw owl shift summary
189703 10/13/09 07:42 frw hall access delayed
189702 10/13/09 07:07 Wesselmann/P BPM & BCM of Run # 76290
189701 10/13/09 07:04 Petkovic Current 40 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76290)
189698 10/13/09 05:43 Wesselmann/P BPM & BCM of Run #76289
189697 10/13/09 05:40 Petkovic Current 40 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76289)
189695 10/13/09 05:22 Chiba correction
189691 10/13/09 04:02 Chiba WC NPE decreasing??
189690 10/13/09 03:55 Wesselmann/P BPM & BCM of Run #76288
189689 10/13/09 03:52 Petkovic Current 40 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76288)
189687 10/13/09 03:39 frw HV recovered
189683 10/13/09 03:19 Wesselmann/P BPM & BCM of Run # 76287
189682 10/13/09 03:14 Petkovic Current 40 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76287)
189681 10/13/09 03:13 Chiba correction
189680 10/13/09 03:10 Chiba multipricity cause beta twin?
189679 10/13/09 03:03 frw fission chamber purged
189676 10/13/09 02:41 frw bad HV on H2X-4T
189673 10/13/09 02:08 Tang Chunhua Chen also needs LC self trigger runs when there is no beam
189672 10/13/09 01:27 Petkovic Current 40 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76286)
189671 10/13/09 01:18 Wesellmann/P BPM & BCM, Run # 76286
189668 10/13/09 00:25 Petkovic Current 40 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76285)
189667 10/13/09 00:19 maruta Comparison of Visual scaler before and after 1mm target movement
189666 10/13/09 00:19 Gogami/Petko Current 45 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76280)
189665 10/13/09 00:18 Wesellmann/P BPM & BCM for Run # 76285
189664 10/13/09 00:14 Gogami Shift_summury[swing-12Oct2009]
189663 10/13/09 00:05 cdaq Beam Time Accounting
189662 10/13/09 00:04 shichijo Ion chamber and target control screen shot
189661 10/13/09 00:02 Gogami This is test run to check rate will recover or not after moved target.
189660 10/13/09 00:00 shichijo Drift chamber HV screen shot
Monday
189659 10/12/09 23:56 Gogami noticed that rate is decreased , so stopped the run. target is melted?
189658 10/12/09 23:53 Gogami Current 45 uA on 10B (no raster) VISUAL SCALERS (Run76253)
189655 10/12/09 23:46 Gogami changed beam current to 40[uA]
189654 10/12/09 23:45 Gogami It looks count rate is decreased !
189649 10/12/09 23:27 Gogami BPM and BCM screenshot[10B@45uA/Run76283]
189646 10/12/09 23:12 kawama Analysis: Carbon/water missing mass status
189645 10/12/09 22:23 Gogami Current 45 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76282) -->check histograms
189642 10/12/09 21:12 Gogami Current 45 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76281)
189641 10/12/09 21:04 Gogami BPM and BCM screenshot[10B@45uA/Run76281]
189640 10/12/09 21:02 Gogami DCs HV screen shot[10B@40uA/Run76281]
189637 10/12/09 20:47 Gogami Error happend and stop the run
189635 10/12/09 20:46 gogami screen shot of DAQ error #76280
189634 10/12/09 20:44 Reinhold Re: I`d like to take one photon run for WC tomorrow
189633 10/12/09 19:56 Gogami/Petko Current 45 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76280)
189632 10/12/09 19:48 Gogami/Petko DCs HV screen shot[10B@45uA/Run76280]
189631 10/12/09 19:47 Gogami/Petko BPM & BCM of Run #76280
189628 10/12/09 18:54 Nue It is good to see raster monitor is working
189627 10/12/09 18:45 Gogami/Petko BPM and BCM screen shot[10B@45uA/Run76279]
189626 10/12/09 18:42 Gogami/Petko Current 45 uA on 10B (no raster) VISUAL SCALERS -->SLI Beam Energy Spread (Run # 76279)
189625 10/12/09 18:42 Gogami DCs HV screen shot[10B@45uA/Run76279]
189624 10/12/09 18:37 Gogami ps1=10 ==> ps1=2(correct)
189620 10/12/09 18:21 Chiba I`d like to take one photon run for WC tomorrow
189615 10/12/09 17:47 Gogami/Petko BPM&BCM Run#76278
189614 10/12/09 17:40 Gogami/Petko Current 45 uA on 10B (no raster) VISUAL SCALERS -->Beam Energy Spread
189613 10/12/09 17:33 Gogami Raster controls screen shot[no raster]
189612 10/12/09 17:27 Gogami DCs HV screen shot[10B@45uA]
189611 10/12/09 17:23 Gogami BPM and BCM
189609 10/12/09 17:16 Gogami Beam: Beam is back !
189608 10/12/09 17:03 Gogami Beam: Still optimizing the beam injector , beam will be back one or two hours later.
189607 10/12/09 16:53 shichijo target plate #2
189606 10/12/09 16:17 shoh The number of quasi-free at Li target
189605 10/12/09 16:02 frw day shift summary
189604 10/12/09 16:01 cdaq Beam Time Accounting
189601 10/12/09 12:59 chench Can these be put into shift replay check document?
189600 10/12/09 12:55 frw no beam for now
189599 10/12/09 12:24 Reinhold Run #76276: Fast Raster pattern; target seems fine
189598 10/12/09 12:12 frw running conditions for B-10
189597 10/12/09 11:59 frw Target: changed to B-10 target
189596 10/12/09 10:58 frw work on fission chamber
189595 10/12/09 09:43 yuan Haper scan result from MCC
189594 10/12/09 09:28 yuan Status and plan (from RC)
189592 10/12/09 09:13 frw injector work -- access opportunity
189591 10/12/09 09:12 Simon Visual Scalers run#76277, beam: 35uA
189585 10/12/09 08:23 frw harp scan
189580 10/12/09 08:01 horn Owl Shift Summary
189579 10/12/09 08:01 cdaq Beam Time Accounting
189578 10/12/09 07:45 ent Run 76274 - visual scaler rates
189575 10/12/09 07:22 ent Run 76273 - visual scaler rates
189572 10/12/09 06:36 ent Run 76272 - visual scaler rates
189571 10/12/09 06:31 horn Refilled fission chamber gas at ~6:30, pressure=3.1 Torr
189566 10/12/09 05:59 ent Run 76271 - visual scaler rates
189563 10/12/09 05:28 ent Run 76270 - visual scaler rates
189559 10/12/09 04:45 ent Run 76269 - visual scaler rates
189557 10/12/09 04:37 horn Refilled fission chamber gas at ~4:30, pressure=3.07 Torr
189553 10/12/09 04:13 ent Run 76268 - visual scaler rates
189550 10/12/09 03:52 ent Run 76267 - visual scaler rates
189547 10/12/09 02:58 ent Run 76266 - visual scaler rates
189545 10/12/09 02:41 horn Refilled fission chamber gas at ~2:30, pressure=3.11 Torr
189541 10/12/09 02:34 ent Run 76265 - visual scaler rates
189538 10/12/09 01:35 ent Run 76264 - visual scaler rates
189535 10/12/09 00:52 ent Run 76263 - visual scaler rates
189532 10/12/09 00:40 ent Run 1310 (fission)
189531 10/12/09 00:40 horn Refilled fission chamber gas at ~0:30, pressure=3.07 Torr
189529 10/12/09 00:33 chench HDC1&2 efficiency after the ethan problem fixed, result from run=76261
189527 10/12/09 00:01 frw swing shift summary
189526 10/12/09 00:01 cdaq Beam Time Accounting
Sunday
189525 10/11/09 23:57 W. Luo Visual Scalers run#76262, beam: 32.73uA
189522 10/11/09 23:10 W. Luo Visual Scalers run#76260, beam: 32.10uA
189521 10/11/09 23:09 chench HV of drift chamber after the ethan problem is fixed
189518 10/11/09 22:38 W. Luo Visual Scalers run#76260, beam: 32.10uA
189517 10/11/09 22:37 frw back in the game
189514 10/11/09 22:19 W. Luo Refill gas of Fission Chamber, Pressure: 2.98Torr
189513 10/11/09 22:08 frw gas alarm neutralized
189512 10/11/09 21:42 chench Change Lucite bucking coil current from 2.53AMP To 2.35 AMP
189511 10/11/09 21:42 frw hall acess
189509 10/11/09 21:17 frw ethane leak alarm from gas shed
189508 10/11/09 20:44 frw dc gas alarm
189506 10/11/09 20:28 chench I redo the calibraion for HKS drift chamber after debug the hstart_time, and parameter files have been commited.
189505 10/11/09 20:21 W. Luo Visual Scalers run#76259, beam: 33.71uA
189502 10/11/09 20:06 W. Luo EDC2 new missing wire for run 76258
189501 10/11/09 19:51 W. Luo Visual Scalers run#76258, beam: 33.29uA
189500 10/11/09 19:48 W. Luo Refill gas of Fission Chamber, Pressure: 2.94Torr
189499 10/11/09 19:47 frw DAQ: kill-all due to ROC7
189495 10/11/09 19:22 W. Luo BPM & BCM screen shot
189494 10/11/09 19:21 W. Luo Visual Scalers run#76257, beam: 33.16uA
189491 10/11/09 18:51 Nue Li7 data can be taken until Monday morning.
189490 10/11/09 18:44 W. Luo Visual Scalers run#76256, beam: 33.40uA
189487 10/11/09 18:12 W. Luo Visual Scalers run#76255, beam: 33.40uA
189484 10/11/09 17:42 chench Change the lucite Bucking coil current from 3.00 to 2.53Amp
189483 10/11/09 17:41 chench HKS DC tracking results for run=76112 with ver253, everything looks normal!
189482 10/11/09 17:38 Tang Beam time allocation before Tuesday opening at 8AM
189481 10/11/09 17:36 W. Luo Visual Scalers run#76254, beam: 33.10uA
189478 10/11/09 17:26 W. Luo Refill gas of Fission Chamber, Pressure: 2.96Torr
189475 10/11/09 17:11 Reinhold Re: Why was LC bucking coil current not changed at this access? This was a perfect access to do so.
189474 10/11/09 17:09 Reinhold HKS grouped PID trigger rates unchanged after AC bucking coil adjustment
189473 10/11/09 17:05 Tang Why LC bucking coil current was not changed at this access?
189472 10/11/09 17:03 W. Luo Visual Scalers run#76253, beam: 33.10uA
189469 10/11/09 16:45 Reinhold Lowered AC bucking coil current from 9 A to 8.5 A
189468 10/11/09 16:43 Reinhold Reset HES control power and NMR; magnet up again
189466 10/11/09 16:03 cdaq Beam Time Accounting
189465 10/11/09 16:02 F.Garibaldi CONTROL ACCESS FOR FAILURE AT HES DIPOLE MAGNET POWER SUPPLY
189464 10/11/09 15:42 F.Garibaldi Run #76252 ended for alarm to HRS NMR
189463 10/11/09 15:40 cdaq there is an access error from HES dipole, during run=76252
189461 10/11/09 15:32 chench The HKS track chi2 I got from ver253
189450 10/11/09 12:26 F. Garilba Refilled fission chamber gas at ~12:30, pressure=3.1 Torr
189449 10/11/09 12:13 R. De Leo visual scaler rates [76247]
189446 10/11/09 11:36 yuan Stop run 76245 due to increased dead time
189439 10/11/09 09:46 R. De Leo visual scaler rates [76243]
189437 10/11/09 09:04 yuan Status and plan (from RC)
189436 10/11/09 09:00 garibaldi Refilled fission chamber gas at ~9:00, pressure=3.24 Torr
189432 10/11/09 08:02 horn Owl Shift Summary
189431 10/11/09 08:02 cdaq Beam Time Accounting
189430 10/11/09 07:56 ent Run 76242 - visual scaler rates
189426 10/11/09 07:15 ent Run 76241 - visual scaler rates
189424 10/11/09 06:47 horn Refilled fission chamber gas at ~6:30, pressure=3.04 Torr
189421 10/11/09 06:30 horn beam off for MCC trouble shooting
189420 10/11/09 06:22 ent Run 76240 - visual scaler rates
189416 10/11/09 05:03 ent Run 76239 - visual scaler rates
189415 10/11/09 04:59 hornt beam back - start run 76239
189412 10/11/09 04:40 horn Refilled fission chamber gas at ~4:30, pressure=3.05 Torr
189410 10/11/09 04:18 horn Beam off for separation check in higher pass
189406 10/11/09 03:44 Chiba Bug in tracking part?
189405 10/11/09 03:35 ent Run 76237 - visual scaler rates
189402 10/11/09 02:52 ent Run 76236 - visual scaler rates
189401 10/11/09 02:48 horn Late entry: refilled gas of fission chamber ~12:30am, pressure 3 Torr
189400 10/11/09 02:47 horn Refilled gas of fission chamber ~2:34am, pressure 3.03 Torr
189395 10/11/09 01:54 ent Run 76235 - visual scaler rates
189393 10/11/09 01:06 ent Run 76234 - visual scaler rates
189390 10/11/09 00:37 ent Run 76233 - visual scaler rates
189389 10/11/09 00:34 horn beam back - start run 76233
189388 10/11/09 00:29 W. Luo Current 31.53 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76232)
189385 10/11/09 00:17 horn beam off for dispersion check
189382 10/11/09 00:01 W. Luo Current 31.53 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76232)
189381 10/11/09 00:01 frw swing shift summary
189380 10/11/09 00:00 cdaq Beam Time Accounting
Saturday
189377 10/10/09 23:29 W. Luo Current 31.53 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76231)
189374 10/10/09 22:45 W. Luo Current 31.53 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76229)
189371 10/10/09 22:35 W. Luo Refill gas of Fission Chamber, Pressure: 2.92Torr
189368 10/10/09 22:07 W. Luo Current 31.96 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76229)
189365 10/10/09 21:23 W. Luo Current 33.6 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76228)
189362 10/10/09 20:49 W. Luo Current 33.6 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76227)
189359 10/10/09 20:38 vmaxwell refrigerator in gas shed not closed properly
189358 10/10/09 20:13 W. Luo Current 33.6 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76226)
189355 10/10/09 19:56 W. Luo Refill gas of Fission Chamber, Pressure: 2.88
189353 10/10/09 19:09 W. Luo COREECTION:For run=76225 visual scaler - good format
189352 10/10/09 19:07 W. Luo COREECTION:For run=76224 visual scaler - good format
189351 10/10/09 19:07 W. Luo COREECTION:For run=76224 visual scaler
189350 10/10/09 18:58 frw Beam: no beam
189348 10/10/09 18:33 vmaxwell histograms runs 76222 -24
189347 10/10/09 18:19 W. Luo Current 31.4 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76225)
189344 10/10/09 17:55 W. Luo Current 31.4 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76224)
189342 10/10/09 17:45 W. Luo Refill fission chamber gas at 17:44. Pressure read back: 3.23
189339 10/10/09 16:19 Nue EDC HV was found turned off
189338 10/10/09 16:07 frw Start Swing Shift
189337 10/10/09 15:57 cdaq Beam Time Accounting
189332 10/10/09 15:18 Hari Beam: Beam unstable
189331 10/10/09 15:10 yuan Beam current unstable during Run 76222
189329 10/10/09 14:28 Harikhanal Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76122)
189327 10/10/09 14:03 chench Fix the bug for hdrift_time calcluation and the codes have been commit, the results from run=76191
189323 10/10/09 11:59 Garibaldi Problems with magnets control
189322 10/10/09 11:55 Garibaldi Problems with magnets control
189321 10/10/09 11:24 Harikhanal Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76221)
189316 10/10/09 10:30 Harikhanal Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76220)
189313 10/10/09 10:01 Harikhanal Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76219)
189310 10/10/09 09:30 yuan Status and plan (from RC)
189309 10/10/09 09:12 Harikhanal Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76218)
189304 10/10/09 08:45 Harikhanal Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76217)
189301 10/10/09 08:04 cdaq Beam Time Accounting
189300 10/10/09 08:04 Arshak Owl Shift Summary
189299 10/10/09 08:02 Harikhanal Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76216)
189296 10/10/09 07:25 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76215)
189293 10/10/09 07:02 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76214)
189288 10/10/09 06:12 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76213)
189285 10/10/09 05:33 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76212)
189281 10/10/09 05:05 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76211)
189278 10/10/09 04:40 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76210)
189273 10/10/09 04:02 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76209)
189272 10/10/09 03:42 Arshak Energy spread
189267 10/10/09 03:08 Arshak Beam Spread problem,
189264 10/10/09 02:55 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76208)
189261 10/10/09 02:33 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76207)
189256 10/10/09 01:58 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Energy Spread (Run # 76206)
189254 10/10/09 01:40 Arshak HKS/HES DC HV
189253 10/10/09 01:38 Arshak HKS/HES DC HV
189251 10/10/09 01:32 Arshak Beam Position
189250 10/10/09 01:18 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Enerhy Spread (Run # 76205)
189249 10/10/09 01:05 Petkovic Current 35 uA on 7Li Visual Scalers --> Beam Enerhy Spread (Run # 76204)
189242 10/10/09 00:02 cdaq Beam Time Accounting
Friday
189240 10/09/09 23:04 Nue G&D gen for Visual scaler broken
189237 10/09/09 22:39 kawama Reverted h_trans_dc.f
189234 10/09/09 22:02 kawama rerun ./copymaker
189232 10/09/09 21:56 Reinhold SVN Revison 245 broken
189228 10/09/09 21:31 yuan Plan for rest of the evening and owl shift
189225 10/09/09 20:55 Simon 35 uA on Li7 target Visual Scalers (Run#76198)
189224 10/09/09 20:55 Simon 35 uA on Li7 target Visual Scalers (Run#76198)
189222 10/09/09 20:18 Reinhold Run #76197: Fast raster for 35 uA; target still seems fine
189221 10/09/09 20:09 Nue Current is 35uA for Run 76197
189220 10/09/09 19:55 Simon 30 uA on Li7 target Visual Scalers (Run#76197)
189215 10/09/09 19:42 Simon 30 uA on Li7 target Visual Scalers (Run#76194)
189213 10/09/09 19:39 Reinhold Run #76196: Fast raster pattern at 30 uA
189212 10/09/09 19:38 Simon 20 uA on Li7 target Visual Scalers (Run#76194)
189211 10/09/09 19:35 Simon 10 uA on Li7 target Visual Scalers (Run#76193)
189208 10/09/09 19:27 shoh ion chamber snapshot
189205 10/09/09 19:23 Reinhold Run #76194: FR patern at 20 uA
189201 10/09/09 19:10 shoh The ratio of kaon for hardware cut
189200 10/09/09 19:02 Reinhold Run #76193: FR is ON and in data file
189199 10/09/09 18:46 chench HKS drift chamber efficiency for run=76191
189192 10/09/09 18:10 vmaxwell 45 uA on B10 target Visual Scalers (Run # 76191)
189191 10/09/09 18:06 chench Drift Chamber HV for run=76191 beam current=45uA and Boron=10
189190 10/09/09 17:55 Reinhold Re: Adjust the current of the bucking coil for lucite! (this is like pulling teeth ;-)
189189 10/09/09 17:47 Simon Beam is back, 45 uA
189183 10/09/09 16:01 cdaq Beam Time Accounting
189182 10/09/09 16:00 Nue KD NMR in data stream
189181 10/09/09 16:00 Petkovic Beam: Beam current expectation - for the Swing Shift
189180 10/09/09 15:51 De Leo/Petko Shift Summary (8:00 - 16:00) on 10B with 45 uA
189179 10/09/09 15:46 chench Adjust the current of the bucking coil for lucite!
189174 10/09/09 11:53 Petkovic Beam: Controlled Access Mode - Hall C (11:50)
189173 10/09/09 11:36 De Leo/Petko No beam
189171 10/09/09 10:50 Nue Or make y'(EDC1) vs y'(matrix)?
189170 10/09/09 10:45 Gogami Beam: To open windows of BPM and BCM
189169 10/09/09 10:43 Nue Could you make y'(EDC1) vs y'(EDC2) plot?
189168 10/09/09 10:27 yuan PD called, beam will be unstable for the next two hours
189166 10/09/09 10:16 De Leo/Petko Current 45 uA on B10 VISUAL SCALERS --> Beam Energy Spread (Run # 76190)
189165 10/09/09 10:10 Petkovic DAQ - CODA Rebooted, Run # 76189
189164 10/09/09 10:06 Gogami BPM screen shot[Boron@45uA/Run76190]
189161 10/09/09 09:46 Gogami DCs HV screen shot[Boron@45uA/Run76189]
189159 10/09/09 09:38 yuan Status and plan (from RC)
189158 10/09/09 09:33 Gogami Hist Check[Run76188] ==> looks good
189157 10/09/09 09:33 yuan Another half an hour before beam come back
189156 10/09/09 09:29 Gogami Analysis: Changed Run flag in REPLAY.PARAM @cdaql5
189154 10/09/09 09:06 Raffaele De Beam: Beam Off
189153 10/09/09 08:59 De Leo/Petko Current 45 uA on 10B VISUAL SCALERS --> Beam Energy Spread (76188)
189152 10/09/09 08:48 kawama About HES y' issue
189149 10/09/09 08:32 De Leo/Petko Current 45 uA on 10B VISUAL SCALERS --> Beam Energy Spread (76187)
189148 10/09/09 08:15 Reinhold Aerogel bucking coils
189147 10/09/09 08:08 Reinhold Hall want to control access and back to beam permit: What was the lucite bucking coil adjustment?
189146 10/09/09 08:01 Mostafa Elaa Shift summary
189145 10/09/09 08:01 cdaq Beam Time Accounting
189140 10/09/09 07:18 Hari Khanal Rates for 45 uA on B10 (run # 76186) & histograms
189135 10/09/09 06:15 Hari Khanal Rates for 45 uA on B10 (run # 76184) & histograms
189134 10/09/09 05:58 mostafa Elaa HKS BPM
189133 10/09/09 05:56 mostafa Elaa HKS BPM
189127 10/09/09 05:17 Hari Khanal Rates for 45 uA on B10 (run # 76183) & histograms
189125 10/09/09 05:10 Mostafa Elaa SLI
189124 10/09/09 04:54 Mostafa Elaa SLI
189122 10/09/09 04:29 Hari Khanal Rates for 45 uA on B10 (run # 76182) & histograms
189118 10/09/09 04:11 Reinhold EHODO timing (some issues)
189116 10/09/09 03:43 Hari Khanal Rates for 45 uA on B10 (run # 76181) & histograms
189113 10/09/09 02:59 Hari Khanal Rates for 45 uA on B10 (run # 76180) & histograms
189112 10/09/09 02:58 Chiba BPM 02:55
189111 10/09/09 02:52 Chiba SLI monitor 02:50
189110 10/09/09 02:50 Reinhold We don't have yet HES Y-prime tracking correct?
189108 10/09/09 02:43 Chiba SLI monitor 02:40 (more bad one)
189106 10/09/09 02:39 Chiba SLI minitor 0235
189105 10/09/09 02:26 Chiba SLI monitor 02:20
189104 10/09/09 02:11 Hari Khanal Rates for 40 uA on B10 (run # 76178) & histograms
189103 10/09/09 02:09 Hari Khanal Rates for 40 uA on B10 (run # 76177) & histograms
189102 10/09/09 02:07 Mostafa Elaa Beam: Current beam status
189100 10/09/09 02:00 Mostafa Elaa Beam: The beam is back 45uA
189099 10/09/09 01:55 Mostafa Elaa Beam: Current beam status
189098 10/09/09 01:55 Mostafa Elaa Beam: Current beam status
189095 10/09/09 01:39 Chiba DAQ for Run #76178 was stopped bacause there is no beam for 20 minuits or so
189094 10/09/09 01:38 Hari Khanal Rates for 40 uA on B10 (run # 76177) & histograms
189090 10/09/09 01:06 Mostafa Elaa Beam: SLI Screen
189087 10/09/09 00:02 cdaq Beam Time Accounting
189086 10/09/09 00:00 Abdellah Shift Summary
Thursday
189084 10/08/09 23:38 Arshak Visual Scalers run#76176, after beam back ~45uA
189078 10/08/09 22:54 Arshak Visual Scalers run#76175, beam ~45uA, target Borom-10
189075 10/08/09 22:35 Nue Analysis: HALLC:p : with graphs
189074 10/08/09 22:31 Nue Analysis: HALLC:p
189073 10/08/09 22:18 Nue 50uA Beam made bright spot on B10
189071 10/08/09 22:10 Gogami modified EHODO param and commited to SVN (revision246)
189070 10/08/09 22:10 Arshak Visual Scalers run#76174, beam ~45uA
189066 10/08/09 21:27 maruta Screen shot of EDC/HDC HV at 40uA
189065 10/08/09 21:26 Arshak Beam Position, with beam current 40uA
189064 10/08/09 21:21 Arshak Visual Scalers run#76173, ~40uA
189061 10/08/09 21:15 Visual Scalers run#76171, after beam back ~50uA
189054 10/08/09 21:01 Abdellah Beam is back
189050 10/08/09 19:27 Arshak Run #76169, after Beam was back, and was very unstable from 20-40uA current
189049 10/08/09 19:19 shoh The number of lambda (bind & quasi free) at Boron target
189048 10/08/09 19:02 Arshak run#1269 starts with 3.20Torr heptan pressure
189047 10/08/09 19:00 Abdellah Beam off for 30 min
189046 10/08/09 18:59 Chench Is the run=76169 after beam back?
189042 10/08/09 18:54 Arshak Beam Position, with beam current 40uA
189037 10/08/09 18:45 Arshak Visual Scalers run#76189, after beam back ~38uA
189034 10/08/09 18:11 Abdellah Beam is back
189030 10/08/09 16:11 cdaq Beam Time Accounting
189029 10/08/09 16:01 Garibaldi/Pe Shift Summary (8:00 - 16:00)
189028 10/08/09 15:18 chench HV of drift chambers after no beam for around 70minutes
189027 10/08/09 15:09 T. Petkovic Beam: Injector Problem_Beam Expectation to Hall C
189024 10/08/09 14:44 Nue Hall want to control access and back to beam permit
189023 10/08/09 13:40 F. Garbaldi Beam: Poblem with injector
189019 10/08/09 13:00 Garibaldi/Pe Current 40 uA on 10 B Visual Scalers --> Beam Energy Spread (Run # 76167)
189018 10/08/09 12:55 Petkovic BPM for th 40 microamps
189014 10/08/09 12:32 Nue Beam current is limited to 30uA due to frequent trip in injector
189013 10/08/09 12:29 Garibaldi/Pe Current 30 uA on 10 B Visual Scalers --> Beam Energy Spread (Run # 76166)
189011 10/08/09 11:31 kawama Compare measured field map with TOSCA
189006 10/08/09 10:03 maruta Status (RC report)
189003 10/08/09 09:46 Garibaldi/Pe Current 40 uA on 10 B Visual Scalers --> Beam Energy Spread (Run # 76165)
189002 10/08/09 09:32 Nue Shift takes! Please check and record visual scalers
188997 10/08/09 08:01 Mostafa Elaa Shift summary
188996 10/08/09 08:01 cdaq Beam Time Accounting
188994 10/08/09 07:32 dalton Drift chamber snap shot
188992 10/08/09 07:25 Mostafa Elaa Beam: The beam is unstable
188991 10/08/09 07:05 Mostafa Elaa The Beam is back at 5:50 Am
188990 10/08/09 06:55 Mostafa Elaa The Beam is back at 5:50 Am
188987 10/08/09 06:02 Reinhold SVN COMMIT: fixed a lucite bug, pedestal bug, add pedestal histos
188980 10/08/09 02:19 dalton Fission gas refill
188977 10/08/09 00:51 cdaq Beam Time Accounting
188976 10/08/09 00:28 Reinhold Re: strange cut of HKS forcal plane x v.s. x'
Wednesday
188975 10/07/09 23:57 Nue Tonight Run Plan
188974 10/07/09 23:51 Abdellah Swing shift summary
188973 10/07/09 23:51 Abdellah Swing shift summary
188972 10/07/09 23:50 Abdellah Swing shift summary
188970 10/07/09 23:43 Abdellah Cryo problem again
188967 10/07/09 23:39 vmaxwell Rates for 18.7 uA on B10 (run # 76162) & histograms
188966 10/07/09 23:24 Nue B10's current limit was 20uA
188964 10/07/09 23:12 Nue BCM calibration was finished. B10 target is in
188962 10/07/09 23:10 abdellah back to 10Br target
188960 10/07/09 23:08 abdellah BCM Calib. completed
188946 10/07/09 22:09 Abdellah BCM calibration
188944 10/07/09 22:03 Nue Carbon target in, BCM calibration will start
188940 10/07/09 21:50 shoh strange cut of HKS forcal plane x v.s. x'
188939 10/07/09 21:49 Reinhold Re: Almost the same quasi-free yield from B10 as that from C12
188936 10/07/09 21:03 Tang Almost the same quasi-free yield from B10 as that from C12
188935 10/07/09 19:49 Tang Coincident kaons, not Lambda peak
188934 10/07/09 19:07 shoh Boron study (kaon rate, cointime and so on)
188931 10/07/09 18:24 Abdellah Beam status
188930 10/07/09 18:20 Zhihong Ye Analysis: The RF signals are from channel 1 and channel 2,
188929 10/07/09 17:46 Reinhold SVN COMMIT: added BPM and FR ADC to most recent MAP; define BPM and FR histos in CTP
188928 10/07/09 17:43 Reinhold GMISC definition conflicts
188927 10/07/09 17:39 Tang It is natural to have lower kaon rate in high momentum side in coin_time spectrum
188926 10/07/09 17:38 Nue Beam stopped due to Cryo alam in Linac
188925 10/07/09 17:29 shoh HTOF1X-13 revival
188923 10/07/09 17:27 Nue Target empty
188920 10/07/09 17:10 shoh cointime peak before and after changing collimetor
188917 10/07/09 16:44 abdellah run 76155 stopped
188916 10/07/09 16:41 Nue B10 was removed, put Carbon for BCM calibration
188908 10/07/09 16:07 Petkovic Shift Summary (8:00 - 16:00) on 10B target
188907 10/07/09 16:01 cdaq Beam Time Accounting
188906 10/07/09 15:53 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76154)
188903 10/07/09 15:20 shoh commit new hhodo.param file
188902 10/07/09 15:19 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76153)
188901 10/07/09 15:18 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76152)
188900 10/07/09 15:11 Petkovic/Kha Erata in Run # 76151 and 76151 w.r.t. log Entries
188897 10/07/09 14:42 Petkovic Entry 188896 corresponds to Run # 76160
188896 10/07/09 14:32 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76149)
188889 10/07/09 13:38 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76149)
188888 10/07/09 13:14 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76149)
188882 10/07/09 12:16 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76148)
188880 10/07/09 12:15 Tang The shift is on HES side
188877 10/07/09 11:30 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76147)
188874 10/07/09 11:11 mack unaccounted for saturation in the field integral?
188872 10/07/09 10:34 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76146)
188868 10/07/09 10:03 kawama The problem of missing mass
188866 10/07/09 09:53 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76145)
188864 10/07/09 09:21 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76144)
188862 10/07/09 09:03 Khanal/Petko Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76143)
188859 10/07/09 08:35 Petkovic Current 40 uA on 10B --> Visual Scalers & Beam Energy Spread (Run # 76142)
188856 10/07/09 08:02 mostafa_elaa Shift summary
188855 10/07/09 08:01 mostafa_elaa Shift summary
188854 10/07/09 08:01 cdaq Beam Time Accounting
188853 10/07/09 07:57 kawama I'm so sorry ... This is my mistake
188852 10/07/09 07:51 Nuruzzaman Restarted HKS CODA three times during the OWL shift
188851 10/07/09 07:44 kenyon Helium bottles
188850 10/07/09 07:41 Nuruzzaman Beam Position Snap
188841 10/07/09 06:03 kawama Modified HKS reconstruction matrix
188840 10/07/09 05:39 Nuruzzaman Beam Position Snap
188824 10/07/09 02:37 Gogami EHODO raw hitpattern of some run
188823 10/07/09 02:23 shoh new hhodo.param, HTOF1X13 fixed
188822 10/07/09 02:15 Nuruzzaman Beam Position Snap
188821 10/07/09 02:12 Reinhold GMISC definition conflicts
188814 10/07/09 01:03 Gogami [HES momentum gap caused by EHODO17] ==> EHODO hitpat(coin ntuple) ==>correct histogram
188813 10/07/09 01:00 [HES momentum gap caused by EHODO17] ==> EHODO hitpat(coin ntuple)
188810 10/07/09 00:42 Gogami HES momentum gap caused by EHODO17
188809 10/07/09 00:41 Nuruzzaman Rates 10B @ 40uA [Run76129]
188808 10/07/09 00:12 Nuruzzaman Beam Position Snap
188807 10/07/09 00:10 Mostafa Elaa fission chamber was off
Tuesday
188802 10/06/09 23:48 hubt shift summary 10/06 swing
188801 10/06/09 23:37 Reinhold HHodo Timing offsets (again with better figure)
188800 10/06/09 23:36 Reinhold HHodo Timing offsets
188795 10/06/09 23:00 Nue Target is B10, not B11
188792 10/06/09 22:31 saw CODA errors
188791 10/06/09 22:13 vmaxwell errors during run # 76124
188785 10/06/09 20:57 vmaxwell histograms run # 76124
188784 10/06/09 20:50 Gogami Rates 11B @ 40uA [Run76124]
188783 10/06/09 20:44 Gogami Ion chamber and Raster controller screen shot[11B @ 40uA/Run76124]
188782 10/06/09 20:42 Gogami DCs HV screen shot[boron@40uA/Run76124]
188778 10/06/09 20:19 Hari Beam: Mcc rebooting ISO -20
188777 10/06/09 20:11 Nue Rates 35uA on B without raster
188775 10/06/09 20:03 vmaxwell noticed both helium bottles open during gas check
188774 10/06/09 19:43 Gogami [Ion chamber and fast raster controls] screen shot
188773 10/06/09 19:42 Nue Rates for 35uA on B10, 1x1 FR
188764 10/06/09 19:31 Nue Rate 30uA on B10, raster 1x1, Ion Chamber
188763 10/06/09 19:27 Tang About 20 MeV/c shift - possibly due to HES X shift
188760 10/06/09 19:17 vmaxwell info incorrect for run # 1231 due to callibrations occuring throughout run time
188759 10/06/09 19:17 Nue Scaler B10, 5uA 1x1 FR
188755 10/06/09 19:15 yuan No TOF beta cut in current HKS TOF code
188751 10/06/09 19:11 Nue Ion Chamber for Boron10, 5uA raster 1x1
188750 10/06/09 19:10 Nue Ion Chamber for Boron10, 5uA raster 1x1
188745 10/06/09 19:00 shoh kaon momentum distrubution for HES v.s. HKS
188743 10/06/09 18:57 Gogami fast raster controls show y-direction extension.But seeing at Beam position at BeO , it seems x-direction extension.
188736 10/06/09 18:22 Reinhold Run #76114 (coin) : adjusted Fast Raster amplifier setting during this run
188735 10/06/09 18:22 vmaxwell Rates for 2 uA on BeO
188732 10/06/09 18:13 Chiba AC npe vs WC npe & WC threshold
188729 10/06/09 17:47 Gogami fast raster screen shot
188725 10/06/09 17:24 Chiba beta<0.2? particle and HTOF timing
188723 10/06/09 17:05 maruta This run was end with attached screen shot error
188721 10/06/09 16:58 histograms run # 76111
188719 10/06/09 16:03 Reinhold Re: Lucite ADC problem
188718 10/06/09 16:01 cdaq Beam Time Accounting
188716 10/06/09 15:58 Reinhold Re: background rate
188715 10/06/09 15:53 gaskell Day Shift Summary: 10/06/2009
188714 10/06/09 15:48 Reinhold Re: Aerogel over kill?
188713 10/06/09 15:48 Gogami Hist Check[Run76109] no missing channel
188712 10/06/09 15:38 Gaskell/Petk Current 40 uA on 12C --> Visual scalers & Beam Energy Spread (X)
188711 10/06/09 15:37 Zhihong Ye Analysis: By comparing with Geant Simulation, look getting better
188706 10/06/09 15:02 Gaskell/Petk Current 36 uA on 12C --> Visual scalers & Beam Energy Spread (X)
188705 10/06/09 15:01 Zhihong Ye Analysis: Switch the map of K1X and Lucite, K1X-13 is OK, Lucite ADC problem
188704 10/06/09 14:41 Gaskell/Petk Current 36 uA on 12C --> Visual scalers & Beam Energy Spread (X)
188702 10/06/09 14:15 Gogami Theta vs. phi [HES side] with and without y' infomation
188701 10/06/09 14:02 Petkovic Current 36 uA on 12C --> Visual scalers & Beam Energy Spread (X)
188698 10/06/09 13:30 Petkovic Current 36 uA on 12C --> Visual scalers & Beam Energy Spread (X)
188693 10/06/09 12:28 Petkovic Current 36 uA on 12C --> Visual scalers
188692 10/06/09 12:25 Tang Your 13 hours may be wrong
188691 10/06/09 12:18 Petkovic Current 36 uA on 12C --> Visual scalers & Beam Energy Spread
188687 10/06/09 12:07 maruta Visual Scalar rate at 48uA
188686 10/06/09 12:04 kawama Carbon missing mass status
188685 10/06/09 12:03 gaskell beam back
188684 10/06/09 11:36 shichijo background rate
188683 10/06/09 11:00 Chiba Aerogel over kill?
188678 10/06/09 09:47 gaskell Beam gone for injector work
188677 10/06/09 09:28 gaskell SLI control unit reset
188676 10/06/09 09:28 maruta status (RC report)
188673 10/06/09 08:44 Petkovic Current 38 uA on 12C VISUAL SCALERS
188671 10/06/09 08:01 Mostafa Elaa Shift Summary
188670 10/06/09 08:01 cdaq Beam Time Accounting
188669 10/06/09 07:57 Mostafa Elaa SLI screen
188666 10/06/09 07:24 Nuruzzaman Beam Position Snaps
188659 10/06/09 05:41 Picture Horizontal Beam Plane
188658 10/06/09 05:40 Nuruzzaman Beam Position snap
188656 10/06/09 05:33 Mostafa Picture Horizontal beam plane
188655 10/06/09 05:31 Mostafa Picture Horizontal beam plane
188653 10/06/09 05:09 Mostafa Elaa Horizontal beam plane
188649 10/06/09 04:49 kawama This may be offset parameter problem
188648 10/06/09 04:44 Nuruzzaman Fission Chamber FFD-C-I alarm
188647 10/06/09 04:33 kawama BCM scaler value
188644 10/06/09 04:11 Reinhold H1X13 puzzle: a software issue? (now hopefully with the figure)
188641 10/06/09 04:09 Reinhold H1X13 puzzle: a software issue?
188640 10/06/09 03:44 Nuruzzaman Beam Position Snaps
188639 10/06/09 03:43 kawama Rate with visual scaler w/ carbon, 35uA
188638 10/06/09 03:36 kawama Changed prescale factor
188636 10/06/09 03:18 kawama MCC called; Beam is off about 30 minuites
188634 10/06/09 03:12 kawama Beam is unstable during this run
188633 10/06/09 03:08 Chiba From Run 76059- WC threshold is (80=lowp,100=highp)
188630 10/06/09 02:40 Nuruzzaman Snpas shot of HKS,HES and Fission Chamber
188629 10/06/09 02:37 Nuruzzaman Beam Position snap
188627 10/06/09 02:14 Nue Beam current cannot go beyond 30uA again
188625 10/06/09 02:02 Nuruzzaman HKS and HES Drift chamber snaps
188624 10/06/09 01:42 Reinhold H1X13 puzzle
188620 10/06/09 01:15 Nuruzzaman Correction
188618 10/06/09 01:10 Nuruzzaman Gas pressure went up >4Torr
188616 10/06/09 01:07 Nuruzzaman Beam Position Snap
188614 10/06/09 00:44 shoh hit pattern of HTOF 1X & 1Y & 2X at hscin-ntuple
188612 10/06/09 00:42 ReinholdAdd Add AC back to CPi vetoes
188611 10/06/09 00:39 Reinhold Restored order of H1X13 & 15
188609 10/06/09 00:35 Nue We had already bad background in 2005.
188607 10/06/09 00:29 Reinhold Swapped H1X13 & 15 at discriminator
188605 10/06/09 00:20 Reinhold Adjust H1X13 timing
188604 10/06/09 00:01 cdaq Beam Time Accounting
Monday
188603 10/05/09 23:59 Bitao Hu shit sumarry 10/05 swing
188602 10/05/09 23:58 Bitao Hu shit sumarry 10/05 swing
188600 10/05/09 23:42 bono plot correction
188599 10/05/09 23:29 Arshak HKS/HES DC HV
188598 10/05/09 23:27 bono timing offset in the H1X13
188597 10/05/09 23:27 Arshak Beam Position, with beam current 2 uA
188596 10/05/09 23:26 maruta Signal and noise distribution at z=400cm
188595 10/05/09 23:25 Arshak Visual Scalers run#76089
188594 10/05/09 23:21 Reinhold Rate for CP0&Ki for 10uA on C was for 2 uA
188593 10/05/09 23:10 Nue Rate for CP0&Ki for 10uA on C
188591 10/05/09 22:59 Reinhold no_key
188585 10/05/09 22:39 Reinhold Set trigger grouped charged particle
188584 10/05/09 22:35 Arshak Asked 2uA beam current, Joerg is checking Trigger time
188581 10/05/09 22:06 shoh figure is wrong at my previous entry
188578 10/05/09 21:56 Nue Rates for 10uA on C, new TUL
188574 10/05/09 21:04 Arshak HKS/HES Dc HV
188573 10/05/09 20:59 Arshak Beam Position
188570 10/05/09 20:27 maruta Each group events on the FP
188569 10/05/09 20:01 Arshak incorrect entry 188567 10/05/09 19:43 Arshak Fission run#1216--->(incorrect) should be run#1219 is junk
188567 10/05/09 19:43 Arshak Fission run#1216 is junk
188560 10/05/09 17:33 Arshak Fission run#1216, before end of this run the beam current was changed to 10 uA
188557 10/05/09 16:49 Arshak Visual Scalers run#76083
188554 10/05/09 16:16 Nue Beam: BCM calibration plan
188553 10/05/09 16:09 Arshak HKS/HES DC HV
188552 10/05/09 16:07 Arshak Beam Position
188551 10/05/09 16:02 cdaq Beam Time Accounting
188550 10/05/09 16:00 kohlm shift summary 10/05 day
188547 10/05/09 15:58 kohlm Beam: beam is back on
188546 10/05/09 15:56 shoh The grouping range for new program
188545 10/05/09 15:45 kohlm
188544 10/05/09 15:29 kohlm Beam: MCR accessing HallC
188542 10/05/09 15:23 Petkovic Current 40 uA on 12C VISUAL SCALERS
188538 10/05/09 14:39 Kohl/Petkovi Current 40 uA on 12C VISUAL SCALERS
188534 10/05/09 13:59 Petkovic Current 40 uA on 12C target VIsual Scalers
188532 10/05/09 13:27 Nue We changed collomator position to recover high P coin events in HES
188531 10/05/09 13:25 Tang HV change for HDC1 & 2, and EDC2
188528 10/05/09 13:02 Tang You and Shoh had great effort and did great job. You do see Sigma!
188526 10/05/09 12:48 Nue DC currents for 40uA on C
188525 10/05/09 12:44 Petkovic Current 40 uA on 12C VIsual Scalers
188521 10/05/09 12:16 kohlm Beam: increased current from 35muA to 40muA after 76075
188520 10/05/09 12:10 Chiba WC status in th100mV and comparison of 1-12 & 2-12 in th 100mV and 120 mV
188519 10/05/09 12:08 Petkovic Current 40 uA on 12C (HES coll. down as it was) Visual Scalers
188518 10/05/09 11:55 Petkovic Current 37 uA on 12C Visual Scalers
188515 10/05/09 11:46 shoh write new programs, and don't download yet
188514 10/05/09 11:39 kohlm stopped run 76074 to check a lemo cable
188509 10/05/09 11:00 Petkovic Current 37 uA on 12C Visual Scalers (HES coll. down by 3 cm)
188508 10/05/09 10:45 kohlm HES collimator position change
188505 10/05/09 10:22 kohlm Beam: energy spread improved
188503 10/05/09 10:13 kohlm Run 76071 ended with EB error
188502 10/05/09 10:07 Petkovic Current 37 uA on 12C Visual Scalers
188497 10/05/09 09:37 kawama Errata
188496 10/05/09 09:33 kawama Look at my directory for cointime correction function
188495 10/05/09 09:31 maruta Status (RC report)
188494 10/05/09 09:30 Petkovic Current 37 uA on 12C Visual Scalers
188491 10/05/09 09:00 Zhihong Ye Analysis: Would you please tell me your cointime calculation?
188489 10/05/09 08:29 Petkovic Current 37 uA on 12C Visual Scalers
188487 10/05/09 08:07 kawama HKS alarm handler keep beeping w/ beam momentum
188486 10/05/09 08:01 cdaq Beam Time Accounting
188485 10/05/09 07:40 Chiba Comparison of WC lay1 lowp box th = 120mV and 80mV
188482 10/05/09 07:24 kawama BCM & BPM screen shot
188481 10/05/09 07:21 kawama Beam spot was hopping on the target
188477 10/05/09 06:37 kawama Missing mass of water target run; modified
188476 10/05/09 06:26 hari beam stopped
188475 10/05/09 06:24 kawama BCM & BPM screen shot
188473 10/05/09 06:09 Reinhold Some H1X13 inefficiency
188470 10/05/09 06:00 Reinhold Group Analysis: Summary
188469 10/05/09 05:54 Reinhold Group Analysis: AC grouping
188468 10/05/09 05:47 Reinhold Group Analysis: WC1 & 2 grouping
188466 10/05/09 05:35 Reinhold Group Analysis: H1X/H2X grouping
188465 10/05/09 05:30 Reinhold Group Analysis: good & bad events cut definition
188464 10/05/09 05:29 kawama Run76064:Not junk, but very low statistics
188463 10/05/09 05:28 kawama PS1=20 and PS5=2000 from run76065
188457 10/05/09 05:11 kawama Trigger rate w/ 35uA, carbon & change PS factor
188456 10/05/09 04:34 kawama BCM & BPM screen shot
188455 10/05/09 04:32 Reinhold Observe hopping beam; MCC says to give it a few minutes
188451 10/05/09 03:46 kawama BCM & BPM screen shot
188448 10/05/09 02:59 kawama BCM & BCM screen shot
188443 10/05/09 01:39 kawama HKS alarm handler
188442 10/05/09 01:37 Hari Target: Bright spot in traget
188441 10/05/09 01:31 kawama BCM & BPM screen shot
188440 10/05/09 01:16 Chiba Why WC threshold was changed
188437 10/05/09 00:54 kawama Simple analysis for background
188436 10/05/09 00:32 doi missing mass spectrum
188435 10/05/09 00:21 shoh kaon distribution for cointime
188434 10/05/09 00:17 maruta Trigger rate at 35uA carbon target after change WC th from (-80, -120) to (-80, -100)
188433 10/05/09 00:14 cdaq Beam Time Accounting
188432 10/05/09 00:10 Chiba Sorry, (80,120)=>(80,100) is correct
188431 10/05/09 00:04 Chiba WC threshold changed before Run76059 (80,120)=>(80,120)
188428 10/05/09 00:01 Simon Swing shif t summary
Sunday
188425 10/04/09 23:43 shoh missing mass of C target
188422 10/04/09 23:31 kawama This is surely carbon run
188421 10/04/09 23:05 maruta results Geant4 simulation
188420 10/04/09 22:59 Tang Good, but not enough. What is the multiplicity?
188417 10/04/09 22:35 Simon Beam is back
188416 10/04/09 22:35 Tang Another way?
188414 10/04/09 22:20 Nue Probably low momentum positrons
188413 10/04/09 21:28 Gogami EHODO offset parameters have been committed to SVN
188412 10/04/09 21:20 Tang The question is whether this background can be blocked.
188410 10/04/09 21:03 maruta Add 9th dipole NMR value (HCNMR:SIG) to Archiver
188408 10/04/09 20:06 Reinhold Background comes from HKS-D NMR port?
188407 10/04/09 19:43 Simon Run #1206 is junk
188406 10/04/09 19:41 Nue Beam stop is due to fault of vacuum valve 4T09A
188405 10/04/09 19:34 Nue Hall C beam instablity was caused by MQA3C07
188403 10/04/09 19:05 Simon Beam has gone
188398 10/04/09 18:40 maruta The movie
188395 10/04/09 17:26 Simon/Bitao Curent 35 uA on 12C target Visual Scalers
188394 10/04/09 17:17 Reinhold Analysis of background for Cr @ 8 uA run 75981
188389 10/04/09 16:53 mack bright spot
188388 10/04/09 16:51 maruta Background comes from HKS-D NMR port?
188387 10/04/09 16:38 Nue Even spot looks a supernova, ion chambers are quiet as normal
188386 10/04/09 16:25 Nue Beam: Beam spot on the carbon target is extraordinary bright
188385 10/04/09 16:24 Petkovic A Longer Shift Summary (8:00 - 16:00, Oct 4)
188384 10/04/09 16:03 cdaq Beam Time Accounting
188382 10/04/09 15:51 Nunez 35 uA C target, Energy spread too high
188380 10/04/09 15:25 shoh change argon tank
188379 10/04/09 15:17 Nunez Drift chamber currents 35uA C target
188378 10/04/09 14:56 Rate Screenshot for 35uA on Carbon [EHODO]
188376 10/04/09 14:52 Tang Compare number of counts in ADC and in coin_TDC window
188375 10/04/09 14:49 Nue Screenshot for 35uA on Carbon
188374 10/04/09 14:46 Nunez/Petkov Curent 35 uA on 12C target Visual Scalers
188370 10/04/09 14:31 Tang Are those coincident quasi-free events?
188369 10/04/09 13:57 Nunez/Petkov Curent 10 uA on 12C target Visual Scalers
188364 10/04/09 13:00 Nunez Carbon target 10uA visual scalar
188363 10/04/09 12:58 Nunez/Petkov Carbon target 4uA visual scalar
188362 10/04/09 12:48 Nue Snapshot singles rates 10uA on Carbon, WC 120mV
188361 10/04/09 12:47 Nue Snapshot singles rates 4uA on Carbon, WC 120mV
188358 10/04/09 12:39 Nunez/Petkov Carbon target 4uA visual scalar
188356 10/04/09 12:29 Nue Snapshot 4uA on Cr, WC 120mV
188354 10/04/09 12:23 Nunez/Petkov Current 4 uA on 52Cr Visual scalers (important)
188350 10/04/09 12:04 kawama Carbon quasi-free rate
188349 10/04/09 11:55 Nunez/Petkov Current 8 uA on 52Cr Visual Scalers
188347 10/04/09 11:52 Nue Beta Brite hung up
188346 10/04/09 11:50 kawmaa rerun ./copymaker
188343 10/04/09 11:21 kawama WC threshold changed & found wrong threshold value
188342 10/04/09 11:20 Nue Screenshot for 8uA on Cr, after WC threshold change
188341 10/04/09 11:15 kawama This is 8uA, Cr run
188340 10/04/09 11:14 kawama Compare HES momentum acceptance w/ Geant
188339 10/04/09 11:13 Nunez 8 uA 52Cr threshold 120mV on WC Visual Scalar
188336 10/04/09 10:55 PETKOVIC Finished study on 2 uA on 52Cr (Run #76045). Continued with 8 uA on 52Cr
188335 10/04/09 10:50 kawama Screen shot of HKS rate meter for 2uA, Cr
188332 10/04/09 10:46 Nunez 2 micro Ampere Visual Scalar "Important Data"
188331 10/04/09 10:33 PETKOVIC Current of 2 uA on 52CR
188330 10/04/09 10:31 kawama Screen shot of HKS rate meter for 2uA, Cr
188328 10/04/09 10:29 kawama Screen shot of HKS rate meter for 4uA, Cr
188326 10/04/09 10:25 shichijo rate for 4uA on Cr
188325 10/04/09 10:19 Nunez Target 52Cr with 4microAmpere current Visual Scaler
188324 10/04/09 10:03 PETKOVIC Water leak fixed. Beam current on 52Cr decreased to 4 uA
188321 10/04/09 09:48 Chiba Suestion for higher threshold
188319 10/04/09 09:38 PETKOVIC Beam stopped at 9:17 by the MCR's chief rew
188318 10/04/09 09:21 Nunez/Petkov Target 52Cr with a current 8 uA
188314 10/04/09 08:29 Nunez/Petkov Target 52Cr, current 8 uA (Visual scalers)
188311 10/04/09 08:03 cdaq Beam Time Accounting
188310 10/04/09 07:55 neville Owl shift summary
188303 10/04/09 06:56 Nue Flat readout of the 9th dipole NMR is better
188300 10/04/09 06:07 Badui Call from MCC
188292 10/04/09 04:50 kawama HallA requested to change half plate
188291 10/04/09 04:37 kawama Keyboard for BPM monitor PC is broken
188288 10/04/09 04:31 Badui Hall C 9th Dipole NMR
188279 10/04/09 02:45 kawama CODA recovered
188278 10/04/09 02:40 Gogami Theta vs. phi [HES side]
188277 10/04/09 02:37 neville 8.1 uA visual scalars
188275 10/04/09 01:55 doi phi-theta scatter plot at target
188274 10/04/09 01:37 Badui End fail on run # 76030
188269 10/04/09 00:24 kawama Error on gen_event_info.cmn
188266 10/04/09 00:11 chench lucite TDC cut, analysis results from run=76024
Saturday
188265 10/03/09 23:58 cdaq Beam Time Accounting
188264 10/03/09 23:56 Arshak Swing Shift Summary
188263 10/03/09 23:51 chench Change Lucite V_TH_TOP=10mV and V_TH_BOT=10mV before run=76024
188257 10/03/09 23:07 Nue 9th Dipole NMR (HCNMR:SIG) vs HALLC:p
188251 10/03/09 21:58 Reinhold SVN COMMIT: add TS latched pattern analysis (at revision 231)
188249 10/03/09 21:38 Reinhold Wrong order in e_trans_dc1!
188248 10/03/09 21:38 Arshak 76023 is Junk
188245 10/03/09 21:14 Arshak Visual Scalers run#76022
188243 10/03/09 21:03 Arshak Beam Position after controlled access
188242 10/03/09 21:01 Nue HES-D PS cannot be controled. Control access to Hall.
188240 10/03/09 21:00 chench Lucite TDC cut, analysis from run=76017
188236 10/03/09 20:31 Arshak Asked for Controlled access, HES Dipole have problem and also we lost communication with Dipole
188234 10/03/09 20:15 Arshak HDC/EDC HV
188224 10/03/09 18:39 Arshak Cdaql5 died. I rebooted it.
188220 10/03/09 18:00 Reinhold Analysis of TS trigger data register (continued)
188219 10/03/09 17:59 chench Before this run, vth_lucite change to 40mV
188218 10/03/09 17:58 chench lucite TDC cut ,analysis result for run=76013
188217 10/03/09 17:54 Arshak Visual Scalers run#76017
188208 10/03/09 16:30 Arshak Visual Scalers run#76013
188207 10/03/09 16:17 chech LUCITE HV after first change from LC7B TO LC16B
188206 10/03/09 16:16 Arshak Beam Position
188205 10/03/09 16:15 chench LUCITE HV after first change run=76013
188204 10/03/09 16:02 cdaq Beam Time Accounting
188201 10/03/09 15:50 Nue HES singles rate should be still dominated by background
188200 10/03/09 15:42 neville 10/3/09 Day shift summary
188197 10/03/09 15:22 Neville/Petk Current 8 uA on 52Cr (Visual Scalers)
188196 10/03/09 15:09 Reinhold Analysis of TS trigger data register (continued)
188195 10/03/09 15:00 Reinhold Analysis of TS trigger data register
188190 10/03/09 14:18 Gogami EHODO 13 parameters have committed to SVN.
188185 10/03/09 13:23 Petkovic Current 8 uA on 52Cr
188184 10/03/09 13:16 Tang Rough estimate on yield rates
188181 10/03/09 12:41 Petkovic 8 uA on 52Cr target (Visual Scalers)
188178 10/03/09 12:26 maruta Get new compact flash
188176 10/03/09 12:17 neville IOC reset
188175 10/03/09 11:54 neville IOC HLC 3 Lost
188174 10/03/09 11:49 Reinhold Correct trigger definition likely {[CPi(3/3)*!ACi] * WCi(2/2)} * HES0, i.e. the grouped CP and not CP0
188170 10/03/09 11:28 neville Current of 7.7 uA on target Cr
188169 10/03/09 11:17 neville Beam is Back
188167 10/03/09 10:28 Nue Could you check the MM formula for proton kinematics?
188164 10/03/09 09:48 kawama pk vs pe distribution in water and carbon target
188163 10/03/09 09:33 kawama # of lambda in the spectrum
188162 10/03/09 09:22 maruta ELOG copy
188161 10/03/09 09:21 Nue HKS p distribution looks normal for H2O
188160 10/03/09 09:05 maruta status (RC report)
188157 10/03/09 08:04 Danagoulian Shift summary
188156 10/03/09 08:02 cdaq Beam Time Accounting
188154 10/03/09 04:44 kawama Follow up for figure explanation
188153 10/03/09 04:40 kawama Compare the mm shape and HKS mom. distribution between carbon and water target
188152 10/03/09 04:38 Badui Owl Shift 10/3/09
188143 10/03/09 01:18 Danagoulian ROC 7 error message
188135 10/03/09 00:09 cdaq Beam Time Accounting
188134 10/03/09 00:03 maeda Swing shift run summary
Friday
188132 10/02/09 23:53 maeda run#75999 replay visual scaler
188130 10/02/09 23:43 maeda beam back
188125 10/02/09 21:56 maruta HES-D is recovered
188124 10/02/09 21:49 saw Smart drive failing?
188123 10/02/09 21:43 maruta hcpc10402 smart drive going to die?
188122 10/02/09 21:43 maruta hcpc10402 smart drive going to die?
188121 10/02/09 21:42 maeda HES recovered,
188119 10/02/09 21:25 saw Reloaded alarm limits for PC104s
188116 10/02/09 20:55 maeda Hall C controlle access to check HES dipole controle.
188115 10/02/09 20:54 maruta HES-D is down
188113 10/02/09 20:33 maeda run75998 stop HKS alarm handler warning,
188111 10/02/09 20:09 Casey Nevill Alarm Handler Warnings
188110 10/02/09 20:03 maeda run#75998 replay visual scaler
188107 10/02/09 19:19 maeda run#75997 visual scaler, replay
188106 10/02/09 19:17 shoh The number of Kaon before and ahter changing TUL probrams
188104 10/02/09 19:05 maeda beam back start new run at 7:05PM
188101 10/02/09 18:35 maeda run stop because of no beam
188097 10/02/09 17:55 maeda run#75995, replay and visual scaler
188092 10/02/09 17:22 maeda run#75994, replay, visual scaler
188089 10/02/09 17:03 maeda visual scalar 8uA, Cr
188088 10/02/09 16:45 maeda I=8uA Target:Cr
188087 10/02/09 16:36 yuan New code commited to SVN (rev 227)
188084 10/02/09 16:23 saw Alarm handler for beam and magnet conditions (Beta)
188083 10/02/09 16:02 cdaq Beam Time Accounting
188082 10/02/09 16:01 gaskell Day Shift Summary: 10/2/2009
188079 10/02/09 15:45 yuan Fixed a bug in TOF beta calculation, related to multiple hit TDC
188078 10/02/09 15:34 Petkovic Comment / Correction on the Scalers w.r.t. the entries: 188069 and 188072
188076 10/02/09 15:25 chench After run=75990, before grun=75991, the threshold of lucite change to 60mV
188072 10/02/09 14:59 Petkovic Current I = 8 uA on target Cr
188069 10/02/09 14:29 Petkovic Current I = 8 uA on Cr target (Visual Scalers)
188068 10/02/09 14:20 Nue Large background from Water Cell is due to window, we need to design CH2 bar
188065 10/02/09 14:02 Reinhold First lambda peak??
188064 10/02/09 13:56 Reinhold Answer for Nue: About prescale factor for LED/Laser trigger (correction)
188063 10/02/09 13:54 shoh Kaon distrubution for forcal plane
188062 10/02/09 13:53 Reinhold Answer for Nue: About prescale factor for LED/Laser trigger
188059 10/02/09 13:09 chench The threshold of LC becomes 100mV after run=75986 and before 75987
188058 10/02/09 13:00 gaskell Rates for 8 uA on 52Cr
188055 10/02/09 12:51 gaskell switchnig to 52Cr
188053 10/02/09 12:47 Tomislav Pet Rates for Current 10uA on Carbon target
188051 10/02/09 12:37 shoh HKS forcal plane v.s. beta
188050 10/02/09 12:32 gaskell Changing target to water cell
188047 10/02/09 12:06 Zhihong Ye Analysis: Strange distribution of HES FP X vs HES Target RF with new ehodo parameters
188045 10/02/09 11:53 gaskell beam back
188042 10/02/09 11:27 Tang Wrong threshold for LC
188041 10/02/09 11:26 gaskell access to add shielding for fission chamber
188038 10/02/09 11:24 shoh ADC saturation of HTOF
188037 10/02/09 11:20 gaskell camera fixed
188036 10/02/09 10:56 maruta Present status (Run coordinator)
188035 10/02/09 10:41 gaskell bubbler camera flaky
188032 10/02/09 08:34 gaskell and it's gone....
188027 10/02/09 08:20 gaskell 2 uA on the way
188026 10/02/09 08:08 cdaq Beam Time Accounting
188025 10/02/09 08:01 Gogami Owl shift summary[02_Oct_2009_]
188024 10/02/09 07:59 kawama current cointime staus
188023 10/02/09 07:10 kawama First lambda peak??
188021 10/02/09 06:30 Gogmai BCM & BPM
188020 10/02/09 06:25 Gogami Call from MCC . Beam is stopped . problem have not fixed yet.
188017 10/02/09 06:21 Gogami Beam is back . now 52Cr @ 8[uA]
188015 10/02/09 05:58 kawama Compare the S/N ratio in the coitime between carbon and water target
188014 10/02/09 05:51 Gogami BPM & BCM screen shot
188013 10/02/09 05:45 Gogami This is 52Cr target
188012 10/02/09 05:39 Badui HKS-HES Checklist
188011 10/02/09 05:28 maruta recovery time is still unknown
188010 10/02/09 05:09 Gogami Beam: Call from MCC. They have some problems. beam is stopped.
188006 10/02/09 04:37 cdaq Beam Time Accounting
188005 10/02/09 04:32 badui Histograms for run 75981
188001 10/02/09 04:10 Gogami [Rate 52Cr @ 10uA ] coin4.08MHz ==>coin4.08kHz
187999 10/02/09 04:01 Gogami Rate Cr @ 8.0[uA]
187998 10/02/09 03:56 Gogami Rate 52Cr @ 10uA
187997 10/02/09 03:51 Gogami Drift chambers HVs and current[52Cr @ 8uA]
187996 10/02/09 03:48 Gogami Beam current is too high to take data , coin rate 4.0[kHz] . Changed to 8[uA].
187992 10/02/09 03:40 Gogami This is 52Cr @10uA
187990 10/02/09 03:39 Gogami Drift chambers HVs screen shot [52Cr @ 10uA]
187987 10/02/09 03:35 Gogami Target: Changed the target from H20 to 52Cr @ 10[uA]
187985 10/02/09 03:34 Badui Rates for H2O target at 2.4 uA (run #75976)
187983 10/02/09 03:02 badui bpm&bcm
187982 10/02/09 02:41 badui Histograms for run 75976
187979 10/02/09 01:53 Gogami Crash the run ==> This is JUNK
187976 10/02/09 01:43 badui Error in run #75974
187972 10/02/09 01:12 bad Histograms for run 75973
187971 10/02/09 01:02 Gogami Beam: Call from MCC , Beem was stopped for a few minutes . now beem's back.
187970 10/02/09 01:00 Chiba add some imformation and comment
187969 10/02/09 00:58 badui bcm&bpm screenshot
187968 10/02/09 00:55 badui Histograms for run 75973
187965 10/02/09 00:35 chench Lucite TDC cut results from run=75909
187963 10/02/09 00:21 Gogami Rate H2O @ 2.8[uA]
Thursday
187959 10/01/09 23:26 albayrak Rates 2.8uA on H2O
187954 10/01/09 22:56 Tang Are we taking data 40uA on C?
187952 10/01/09 22:42 albayrak Rates for 10uA on C
187949 10/01/09 22:25 Nue BPM for 40uA on Carbon after energy scan (energy spread is bad)
187948 10/01/09 22:15 albayrak Rates for 10uA on C
187947 10/01/09 22:14 albayrak Rates for 10uA on C
187946 10/01/09 22:14 albayrak Rates for 10uA on C
187945 10/01/09 22:00 Nue Swing/Owl Plan
187942 10/01/09 21:44 Reinhold Call to MCC: inquire about energy spread; they are running crest right now
187941 10/01/09 21:43 maruta Screenshots of digital oscilloscope before/after 10ns delay added
187939 10/01/09 21:20 Nue Swing/Owl Plan
187938 10/01/09 21:13 Reinhold Re: EHODO13s are fixed by delaying EH2-13T&B just before Discriminator
187937 10/01/09 21:08 Gogami EHODO13s are fixed by delaying EH2-13T&B just before Discriminator
187936 10/01/09 21:07 chench drift chamber HV and leakage current
187931 10/01/09 20:59 doi TDC value per 1 bin
187928 10/01/09 20:51 TDC value per 1 bin
187927 10/01/09 20:14 Reinhold MCC delivering 35 uA; however SLI shows 6.5e-5; they''ll look at it
187922 10/01/09 19:29 Tang Fission Exp: ADC gate problem
187921 10/01/09 19:25 Nue TUL new program was not yet downloaded
187920 10/01/09 18:59 Nue Tried to send 40uA on Carbon and failed
187919 10/01/09 18:56 Chiba kaon and proton in WC
187918 10/01/09 18:43 albayrak HKS HES HV turned on
187914 10/01/09 18:39 shichijo HKS TUL program change
187906 10/01/09 18:13 albayrak MCC notified that they will send beam at 18:15
187904 10/01/09 18:03 shoh kaon rate of WC 1/2 & 2/2
187903 10/01/09 16:13 cdaq Beam Time Accounting
187902 10/01/09 15:53 maeda Day shift summary
187901 10/01/09 15:52 cdaq the prescale for run=75961 is:nped=1000,sparse,cosmics,ps1=999999,ps2=99999,ps3=1,ps4=1,ps5=1,ps6=1,ps7=1
187900 10/01/09 15:48 chench run= 75960 is junk
187893 10/01/09 13:26 Nue Beam permit was requested for Hall C
187892 10/01/09 13:25 Nue WC coin level back to 2/2
187891 10/01/09 12:57 Reinhold Late entry: some EH inefficiency and lose UHF connectors
187890 10/01/09 12:47 Nue Control access was requested
187889 10/01/09 12:38 Nue Beam tuning status
187887 10/01/09 12:31 Zhihong Ye The correct path length correction is...
187886 10/01/09 12:29 Zhihong Ye Analysis: Better Coincident time spectra for Pion,Proton,and Kaon
187885 10/01/09 10:58 maeda Target: BeO target
187881 10/01/09 10:31 shoh revision of Fig2
187880 10/01/09 10:28 shoh The comparison of WC 1/2 & WC 2/2
187879 10/01/09 10:11 Nue We took only +20MeV, no +10MeV data
187878 10/01/09 10:07 Nue Hall is going to Beam permit
187877 10/01/09 09:58 Nue Hall went to control access to refill heptane for fission chamber
187876 10/01/09 09:19 Zhihong Ye +10MeV runs are also done? Are runs from 75937 to 73958 actually +10MeV tuning?
187875 10/01/09 08:54 kawama EHODO offset adjustment
187874 10/01/09 08:41 Nue Today's plan, report from RC
187873 10/01/09 08:37 Nue HDC2 foils are not updated on the hv.tcl
187872 10/01/09 08:27 maeda Drift chamber HV off because of beam tunning
187871 10/01/09 08:18 maeda Change to normal energy
187870 10/01/09 08:07 cdaq Beam Time Accounting
187868 10/01/09 07:41 Darko Owl shift summary
187867 10/01/09 07:28 Nue IC for 30uA on C (+20MeV beam)
187864 10/01/09 07:05 Nue WC coin level (1/2) for G1-3, (2/2) for G4-6, rates for 30uA on C
187861 10/01/09 06:35 Nue WC coin level was changed from 2/2 to 1/2, Rates
187851 10/01/09 03:30 Chiba Simple plot of beta : xfp
187850 10/01/09 02:48 Darko Scalers> 35uA Carbon
187847 10/01/09 02:25 Darko 35uA beam is delivering to HallC
187846 10/01/09 01:49 Darko Scalers> 30uA Carbon
187845 10/01/09 01:30 chench HKS drift chamber efficiency from run=75931
187844 10/01/09 01:28 Chiba Rates for 30uA Carbon, 2.365GeV
187843 10/01/09 01:23 kawama HDC, EDC HV screen shot (30uA, C)
187841 10/01/09 01:04 shoh MAP of TUL SEL switch
187840 10/01/09 01:01 Chiba Rates for 8uA Carbon
187839 10/01/09 00:50 Darko Beam: Beam cca 8uA
187837 10/01/09 00:44 kawama HDC. EDC HV screen shot (9uA)
187836 10/01/09 00:26 Nue Data stream contain the Hallc:p information
187835 10/01/09 00:24 Nue BPM for +20MeV just after tune was finished (Late entry)
187832 10/01/09 00:14 Darko Changing target to Carbon
187829 10/01/09 00:01 cdaq Beam Time Accounting