VCS Instructions for Shift Takers
From HallCWiki
Jump to navigationJump to searchInstructions for VCS Polarizabilities
1. Keep an eye on the Hall C Scaler Data GUI and make sure the rates with beam ON are steady
Check the deadtime and the scaler in the 50k report file which is on:
/home/cdaq/vcs2019/hallc_replay_vcs/REPORT_OUTPUT/COIN/PRODUCTION/
2. Login to cdaql1 machine and go to hallc_replay directory if you are not there already:
> ssh cdaql1
> go_analysis
go_analysis will bring you to the vcs2019 directory.
3. After 50K triggers, check online plots for the detectors
For SHMS detector check: ./run_coin_shms.sh <run_number> <last_event>
4. Fill the run sheet for each run, including junk
