Difference between revisions of "Main Page"

From HallCWiki
Jump to navigationJump to search
Line 56: Line 56:
 
* The Horizontal Bender entrance window is 0.010 inches  thick  2024-T3 aluminum.
 
* The Horizontal Bender entrance window is 0.010 inches  thick  2024-T3 aluminum.
 
* The dipole exit window is 0.020 inches thick 5056 aluminum.
 
* The dipole exit window is 0.020 inches thick 5056 aluminum.
 +
 +
== Target ==
 +
*Spring 2017 KKP run
 +
**[https://hallcweb.jlab.org/DocDB/0008/000856/001/HallCTargetConfiguration2-6-17.docx Word doc] describing the targets and their thicknesses. Also available at [https://logbooks.jlab.org/entry/3456394 logbook entry].
 +
**[https://hallcweb.jlab.org/DocDB/0008/000856/001/TGT-301-1001-0110.pdf Drawing] of target ladder. Also available at [https://misportal.jlab.org/jlabDocs/document.seam?id=94157 JLab document repository].
  
 
== HMS Magnets and Vacuum Vessel ==
 
== HMS Magnets and Vacuum Vessel ==

Revision as of 10:09, 23 May 2017

Hallcheader.jpg


Fall 2017 Commissioning Plans

Spring 2017 KPP run

Hall C Links

Hall C

Hall C is one of four experimental halls at JLab.

Hall C Computing.

Hall C in the Press.

Basic Equipment in Hall C

Beamline

Scattering Chamber

  • The scattering chamber window on the SHMS side is 0.020 inches thick 2024-T4 aluminum.

SHMS Magnets and Vacuum vessel

  • The Horizontal Bender entrance window is 0.010 inches thick 2024-T3 aluminum.
  • The dipole exit window is 0.020 inches thick 5056 aluminum.

Target

HMS Magnets and Vacuum Vessel

HMS Detectors

SHMS Detectors

DAQ

Controls

  • High Voltage
  • Spectrometer Controls (Use go_cmagnets command)
  • HMS and SHMS Collimator Control document.

Online Replay

Data Analysis

Monte Carlo

Hall C at 12 GeV